summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/lookup.c
diff options
context:
space:
mode:
authorMatus Fabian <matfabia@cisco.com>2018-10-02 23:27:21 -0700
committerNeale Ranns <nranns@cisco.com>2018-10-12 07:56:35 +0000
commit75b9f45a15bfae423b114dfcaa6eb114c91527eb (patch)
tree35fe306d89b82d3a040fb859adf5de08fbf94ec7 /src/vnet/ip/lookup.c
parent6ca6ac6c887eb38797027169f5a2f84e45b3436d (diff)
ip: add container proxy dump API (VPP-1364)
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326 Signed-off-by: Matus Fabian <matfabia@cisco.com>
Diffstat (limited to 'src/vnet/ip/lookup.c')
-rw-r--r--src/vnet/ip/lookup.c55
1 files changed, 55 insertions, 0 deletions
diff --git a/src/vnet/ip/lookup.c b/src/vnet/ip/lookup.c
index 42509972a98..017ca0db39b 100644
--- a/src/vnet/ip/lookup.c
+++ b/src/vnet/ip/lookup.c
@@ -1321,6 +1321,61 @@ ip_container_proxy_is_set (fib_prefix_t * pfx, u32 sw_if_index)
return (l3p->l3p_sw_if_index == sw_if_index);
}
+typedef struct ip_container_proxy_walk_ctx_t_
+{
+ ip_container_proxy_cb_t cb;
+ void *ctx;
+} ip_container_proxy_walk_ctx_t;
+
+static fib_table_walk_rc_t
+ip_container_proxy_fib_table_walk (fib_node_index_t fei, void *arg)
+{
+ ip_container_proxy_walk_ctx_t *ctx = arg;
+ const fib_prefix_t *pfx;
+ const dpo_id_t *dpo;
+ load_balance_t *lb;
+ l3_proxy_dpo_t *l3p;
+
+ pfx = fib_entry_get_prefix (fei);
+ if (fib_entry_is_sourced (fei, FIB_SOURCE_PROXY))
+ {
+ dpo = fib_entry_contribute_ip_forwarding (fei);
+ lb = load_balance_get (dpo->dpoi_index);
+ dpo = load_balance_get_bucket_i (lb, 0);
+ l3p = l3_proxy_dpo_get (dpo->dpoi_index);
+ ctx->cb (pfx, l3p->l3p_sw_if_index, ctx->ctx);
+ }
+
+ return FIB_TABLE_WALK_CONTINUE;
+}
+
+void
+ip_container_proxy_walk (ip_container_proxy_cb_t cb, void *ctx)
+{
+ fib_table_t *fib_table;
+ ip_container_proxy_walk_ctx_t wctx = {
+ .cb = cb,
+ .ctx = ctx,
+ };
+
+ /* *INDENT-OFF* */
+ pool_foreach (fib_table, ip4_main.fibs,
+ ({
+ fib_table_walk(fib_table->ft_index,
+ FIB_PROTOCOL_IP4,
+ ip_container_proxy_fib_table_walk,
+ &wctx);
+ }));
+ pool_foreach (fib_table, ip6_main.fibs,
+ ({
+ fib_table_walk(fib_table->ft_index,
+ FIB_PROTOCOL_IP6,
+ ip_container_proxy_fib_table_walk,
+ &wctx);
+ }));
+ /* *INDENT-ON* */
+}
+
clib_error_t *
ip_container_cmd (vlib_main_t * vm,
unformat_input_t * main_input, vlib_cli_command_t * cmd)
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/performance/performance_setup.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
| ... | OACL | ACL1 | 100_FLOWS
| ...
| Suite Setup | Run Keywords
| ... | Set up 3-node performance topology with DUT's NIC model | L2
| ... | Intel-X520-DA2
| ... | AND | Set up performance test suite with ACL
| ...
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
| ...
| Test Teardown | Tear down performance test with ACL
| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
| ...
| Test Template | Local Template
| ...
| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using MLRsearch library.
| ... | Test packets are generated by TG on\
| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
| ... | interfaces.
| ... | *[Ref] Applicable standard specifications:* RFC2544.

*** Variables ***
# X520-DA2 bandwidth limit
| ${s_limit}= | ${10000000000}

# ACL test setup
| ${acl_action}= | permit
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100

# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24

| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc

*** Keywords ***
| Local Template
| | [Documentation] | FIXME.
| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
| | Set Test Variable | ${framesize}
| | Set Test Variable | ${min_rate} | ${10000}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_limit} | ${framesize}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}

*** Test Cases ***
| tc01-64B-1c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 1C
| | framesize=${64} | phy_cores=${1}

| tc02-64B-2c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 2C
| | framesize=${64} | phy_cores=${2}

| tc03-64B-4c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 64B | 4C
| | framesize=${64} | phy_cores=${4}

| tc04-1518B-1c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 1C
| | framesize=${1518} | phy_cores=${1}

| tc05-1518B-2c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 2C
| | framesize=${1518} | phy_cores=${2}

| tc06-1518B-4c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 1518B | 4C
| | framesize=${1518} | phy_cores=${4}

| tc07-9000B-1c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 1C
| | framesize=${9000} | phy_cores=${1}

| tc08-9000B-2c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 2C
| | framesize=${9000} | phy_cores=${2}

| tc09-9000B-4c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | 9000B | 4C
| | framesize=${9000} | phy_cores=${4}

| tc10-IMIX-1c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 1C
| | framesize=IMIX_v4_1 | phy_cores=${1}

| tc11-IMIX-2c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 2C
| | framesize=IMIX_v4_1 | phy_cores=${2}

| tc12-IMIX-4c-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr
| | [Tags] | IMIX | 4C
| | framesize=IMIX_v4_1 | phy_cores=${4}