Reorganize source tree to use single autotools instance

Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>

1 files changed, 1079 insertions, 0 deletions

diff --git a/src/vnet/l2/l2_bd.c b/src/vnet/l2/l2_bd.c
new file mode 100644
index 00000000000..22f83d0b3e4
--- /dev/null
+++ b/src/vnet/l2/l2_bd.c
@@ -0,0 +1,1079 @@
+/*
+ * l2_bd.c : layer 2 bridge domain
+ *
+ * Copyright (c) 2013 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <vlib/vlib.h>
+#include <vnet/vnet.h>
+#include <vlib/cli.h>
+#include <vnet/ethernet/ethernet.h>
+#include <vnet/ip/format.h>
+#include <vnet/l2/l2_input.h>
+#include <vnet/l2/feat_bitmap.h>
+#include <vnet/l2/l2_bd.h>
+#include <vnet/l2/l2_learn.h>
+#include <vnet/l2/l2_fib.h>
+#include <vnet/l2/l2_vtr.h>
+#include <vnet/ip/ip4_packet.h>
+#include <vnet/ip/ip6_packet.h>
+
+#include <vppinfra/error.h>
+#include <vppinfra/hash.h>
+#include <vppinfra/vec.h>
+
+/**
+ * @file
+ * @brief Ethernet Bridge Domain.
+ *
+ * Code in this file manages Layer 2 bridge domains.
+ *
+ */
+
+bd_main_t bd_main;
+
+/**
+  Init bridge domain if not done already.
+  For feature bitmap, set all bits except ARP termination
+*/
+void
+bd_validate (l2_bridge_domain_t * bd_config)
+{
+  if (!bd_is_valid (bd_config))
+    {
+      bd_config->feature_bitmap = ~L2INPUT_FEAT_ARP_TERM;
+      bd_config->bvi_sw_if_index = ~0;
+      bd_config->members = 0;
+      bd_config->flood_count = 0;
+      bd_config->tun_master_count = 0;
+      bd_config->tun_normal_count = 0;
+      bd_config->mac_by_ip4 = 0;
+      bd_config->mac_by_ip6 = hash_create_mem (0, sizeof (ip6_address_t),
+					       sizeof (uword));
+    }
+}
+
+u32
+bd_find_or_add_bd_index (bd_main_t * bdm, u32 bd_id)
+{
+  uword *p;
+  u32 rv;
+
+  if (bd_id == ~0)
+    {
+      bd_id = 0;
+      while (hash_get (bdm->bd_index_by_bd_id, bd_id))
+	bd_id++;
+    }
+  else
+    {
+      p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+      if (p)
+	return (p[0]);
+    }
+
+  rv = clib_bitmap_first_clear (bdm->bd_index_bitmap);
+
+  /* mark this index busy */
+  bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, rv, 1);
+
+  hash_set (bdm->bd_index_by_bd_id, bd_id, rv);
+
+  vec_validate (l2input_main.bd_configs, rv);
+  l2input_main.bd_configs[rv].bd_id = bd_id;
+
+  return rv;
+}
+
+int
+bd_delete_bd_index (bd_main_t * bdm, u32 bd_id)
+{
+  uword *p;
+  u32 bd_index;
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+  if (p == 0)
+    return -1;
+
+  bd_index = p[0];
+
+  /* mark this index clear */
+  bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, bd_index, 0);
+  hash_unset (bdm->bd_index_by_bd_id, bd_id);
+
+  l2input_main.bd_configs[bd_index].bd_id = ~0;
+  l2input_main.bd_configs[bd_index].feature_bitmap = 0;
+
+  return 0;
+}
+
+static void
+update_flood_count (l2_bridge_domain_t * bd_config)
+{
+  bd_config->flood_count = vec_len (bd_config->members) -
+    (bd_config->tun_master_count ? bd_config->tun_normal_count : 0);
+}
+
+void
+bd_add_member (l2_bridge_domain_t * bd_config, l2_flood_member_t * member)
+{
+  u32 ix;
+  vnet_sw_interface_t *sw_if = vnet_get_sw_interface
+    (vnet_get_main (), member->sw_if_index);
+
+  /*
+   * Add one element to the vector
+   * vector is ordered [ bvi, normal/tun_masters..., tun_normals... ]
+   * When flooding, the bvi interface (if present) must be the last member
+   * processed due to how BVI processing can change the packet. To enable
+   * this order, we make the bvi interface the first in the vector and
+   * flooding walks the vector in reverse.
+   */
+  switch (sw_if->flood_class)
+    {
+    case VNET_FLOOD_CLASS_TUNNEL_MASTER:
+      bd_config->tun_master_count++;
+      /* Fall through */
+    default:
+      /* Fall through */
+    case VNET_FLOOD_CLASS_NORMAL:
+      ix = (member->flags & L2_FLOOD_MEMBER_BVI) ? 0 :
+	vec_len (bd_config->members) - bd_config->tun_normal_count;
+      break;
+    case VNET_FLOOD_CLASS_TUNNEL_NORMAL:
+      ix = vec_len (bd_config->members);
+      bd_config->tun_normal_count++;
+      break;
+    }
+
+  vec_insert_elts (bd_config->members, member, 1, ix);
+  update_flood_count (bd_config);
+}
+
+#define BD_REMOVE_ERROR_OK        0
+#define BD_REMOVE_ERROR_NOT_FOUND 1
+
+u32
+bd_remove_member (l2_bridge_domain_t * bd_config, u32 sw_if_index)
+{
+  u32 ix;
+
+  /* Find and delete the member */
+  vec_foreach_index (ix, bd_config->members)
+  {
+    l2_flood_member_t *m = vec_elt_at_index (bd_config->members, ix);
+    if (m->sw_if_index == sw_if_index)
+      {
+	vnet_sw_interface_t *sw_if = vnet_get_sw_interface
+	  (vnet_get_main (), sw_if_index);
+
+	if (sw_if->flood_class != VNET_FLOOD_CLASS_NORMAL)
+	  {
+	    if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_MASTER)
+	      bd_config->tun_master_count--;
+	    else if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_NORMAL)
+	      bd_config->tun_normal_count--;
+	  }
+	vec_del1 (bd_config->members, ix);
+	update_flood_count (bd_config);
+
+	return BD_REMOVE_ERROR_OK;
+      }
+  }
+
+  return BD_REMOVE_ERROR_NOT_FOUND;
+}
+
+
+clib_error_t *
+l2bd_init (vlib_main_t * vm)
+{
+  bd_main_t *bdm = &bd_main;
+  u32 bd_index;
+  bdm->bd_index_by_bd_id = hash_create (0, sizeof (uword));
+  /*
+   * create a dummy bd with bd_id of 0 and bd_index of 0 with feature set
+   * to packet drop only. Thus, packets received from any L2 interface with
+   * uninitialized bd_index of 0 can be dropped safely.
+   */
+  bd_index = bd_find_or_add_bd_index (bdm, 0);
+  ASSERT (bd_index == 0);
+  l2input_main.bd_configs[0].feature_bitmap = L2INPUT_FEAT_DROP;
+  return 0;
+}
+
+VLIB_INIT_FUNCTION (l2bd_init);
+
+
+/**
+    Set the learn/forward/flood flags for the bridge domain.
+    Return 0 if ok, non-zero if for an error.
+*/
+u32
+bd_set_flags (vlib_main_t * vm, u32 bd_index, u32 flags, u32 enable)
+{
+
+  l2_bridge_domain_t *bd_config;
+  u32 feature_bitmap = 0;
+
+  vec_validate (l2input_main.bd_configs, bd_index);
+  bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
+
+  bd_validate (bd_config);
+
+  if (flags & L2_LEARN)
+    {
+      feature_bitmap |= L2INPUT_FEAT_LEARN;
+    }
+  if (flags & L2_FWD)
+    {
+      feature_bitmap |= L2INPUT_FEAT_FWD;
+    }
+  if (flags & L2_FLOOD)
+    {
+      feature_bitmap |= L2INPUT_FEAT_FLOOD;
+    }
+  if (flags & L2_UU_FLOOD)
+    {
+      feature_bitmap |= L2INPUT_FEAT_UU_FLOOD;
+    }
+  if (flags & L2_ARP_TERM)
+    {
+      feature_bitmap |= L2INPUT_FEAT_ARP_TERM;
+    }
+
+  if (enable)
+    {
+      bd_config->feature_bitmap |= feature_bitmap;
+    }
+  else
+    {
+      bd_config->feature_bitmap &= ~feature_bitmap;
+    }
+
+  return 0;
+}
+
+/**
+    Set the mac age for the bridge domain.
+*/
+void
+bd_set_mac_age (vlib_main_t * vm, u32 bd_index, u8 age)
+{
+  l2_bridge_domain_t *bd_config;
+  int enable = 0;
+
+  vec_validate (l2input_main.bd_configs, bd_index);
+  bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
+  bd_config->mac_age = age;
+
+  /* check if there is at least one bd with mac aging enabled */
+  vec_foreach (bd_config, l2input_main.bd_configs)
+    if (bd_config->bd_id != ~0 && bd_config->mac_age != 0)
+    enable = 1;
+
+  vlib_process_signal_event (vm, l2fib_mac_age_scanner_process_node.index,
+			     enable ? L2_MAC_AGE_PROCESS_EVENT_START :
+			     L2_MAC_AGE_PROCESS_EVENT_STOP, 0);
+}
+
+/**
+   Set bridge-domain learn enable/disable.
+   The CLI format is:
+   set bridge-domain learn <bd_id> [disable]
+*/
+static clib_error_t *
+bd_learn (vlib_main_t * vm,
+	  unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 enable;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p == 0)
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  bd_index = p[0];
+
+  enable = 1;
+  if (unformat (input, "disable"))
+    {
+      enable = 0;
+    }
+
+  /* set the bridge domain flag */
+  if (bd_set_flags (vm, bd_index, L2_LEARN, enable))
+    {
+      error =
+	clib_error_return (0, "bridge-domain id %d out of range", bd_index);
+      goto done;
+    }
+
+done:
+  return error;
+}
+
+/*?
+ * Layer 2 learning can be enabled and disabled on each
+ * interface and on each bridge-domain. Use this command to
+ * manage bridge-domains. It is enabled by default.
+ *
+ * @cliexpar
+ * Example of how to enable learning (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain learn 200}
+ * Example of how to disable learning (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain learn 200 disable}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_learn_cli, static) = {
+  .path = "set bridge-domain learn",
+  .short_help = "set bridge-domain learn <bridge-domain-id> [disable]",
+  .function = bd_learn,
+};
+/* *INDENT-ON* */
+
+/**
+    Set bridge-domain forward enable/disable.
+    The CLI format is:
+    set bridge-domain forward <bd_index> [disable]
+*/
+static clib_error_t *
+bd_fwd (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 enable;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p == 0)
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  bd_index = p[0];
+
+  enable = 1;
+  if (unformat (input, "disable"))
+    {
+      enable = 0;
+    }
+
+  /* set the bridge domain flag */
+  if (bd_set_flags (vm, bd_index, L2_FWD, enable))
+    {
+      error =
+	clib_error_return (0, "bridge-domain id %d out of range", bd_index);
+      goto done;
+    }
+
+done:
+  return error;
+}
+
+
+/*?
+ * Layer 2 unicast forwarding can be enabled and disabled on each
+ * interface and on each bridge-domain. Use this command to
+ * manage bridge-domains. It is enabled by default.
+ *
+ * @cliexpar
+ * Example of how to enable forwarding (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain forward 200}
+ * Example of how to disable forwarding (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain forward 200 disable}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_fwd_cli, static) = {
+  .path = "set bridge-domain forward",
+  .short_help = "set bridge-domain forward <bridge-domain-id> [disable]",
+  .function = bd_fwd,
+};
+/* *INDENT-ON* */
+
+/**
+    Set bridge-domain flood enable/disable.
+    The CLI format is:
+    set bridge-domain flood <bd_index> [disable]
+*/
+static clib_error_t *
+bd_flood (vlib_main_t * vm,
+	  unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 enable;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p == 0)
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  bd_index = p[0];
+
+  enable = 1;
+  if (unformat (input, "disable"))
+    {
+      enable = 0;
+    }
+
+  /* set the bridge domain flag */
+  if (bd_set_flags (vm, bd_index, L2_FLOOD, enable))
+    {
+      error =
+	clib_error_return (0, "bridge-domain id %d out of range", bd_index);
+      goto done;
+    }
+
+done:
+  return error;
+}
+
+/*?
+ * Layer 2 flooding can be enabled and disabled on each
+ * interface and on each bridge-domain. Use this command to
+ * manage bridge-domains. It is enabled by default.
+ *
+ * @cliexpar
+ * Example of how to enable flooding (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain flood 200}
+ * Example of how to disable flooding (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain flood 200 disable}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_flood_cli, static) = {
+  .path = "set bridge-domain flood",
+  .short_help = "set bridge-domain flood <bridge-domain-id> [disable]",
+  .function = bd_flood,
+};
+/* *INDENT-ON* */
+
+/**
+    Set bridge-domain unkown-unicast flood enable/disable.
+    The CLI format is:
+    set bridge-domain uu-flood <bd_index> [disable]
+*/
+static clib_error_t *
+bd_uu_flood (vlib_main_t * vm,
+	     unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 enable;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p == 0)
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  bd_index = p[0];
+
+  enable = 1;
+  if (unformat (input, "disable"))
+    {
+      enable = 0;
+    }
+
+  /* set the bridge domain flag */
+  if (bd_set_flags (vm, bd_index, L2_UU_FLOOD, enable))
+    {
+      error =
+	clib_error_return (0, "bridge-domain id %d out of range", bd_index);
+      goto done;
+    }
+
+done:
+  return error;
+}
+
+/*?
+ * Layer 2 unknown-unicast flooding can be enabled and disabled on each
+ * bridge-domain. It is enabled by default.
+ *
+ * @cliexpar
+ * Example of how to enable unknown-unicast flooding (where 200 is the
+ * bridge-domain-id):
+ * @cliexcmd{set bridge-domain uu-flood 200}
+ * Example of how to disable unknown-unicast flooding (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain uu-flood 200 disable}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_uu_flood_cli, static) = {
+  .path = "set bridge-domain uu-flood",
+  .short_help = "set bridge-domain uu-flood <bridge-domain-id> [disable]",
+  .function = bd_uu_flood,
+};
+/* *INDENT-ON* */
+
+/**
+    Set bridge-domain arp term enable/disable.
+    The CLI format is:
+    set bridge-domain arp term <bridge-domain-id> [disable]
+*/
+static clib_error_t *
+bd_arp_term (vlib_main_t * vm,
+	     unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 enable;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+  if (p)
+    bd_index = *p;
+  else
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  enable = 1;
+  if (unformat (input, "disable"))
+    enable = 0;
+
+  /* set the bridge domain flag */
+  if (bd_set_flags (vm, bd_index, L2_ARP_TERM, enable))
+    {
+      error =
+	clib_error_return (0, "bridge-domain id %d out of range", bd_index);
+      goto done;
+    }
+
+done:
+  return error;
+}
+
+static clib_error_t *
+bd_mac_age (vlib_main_t * vm,
+	    unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u32 age;
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p == 0)
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  bd_index = p[0];
+
+  if (!unformat (input, "%u", &age))
+    {
+      error =
+	clib_error_return (0, "expecting ageing time in minutes but got `%U'",
+			   format_unformat_error, input);
+      goto done;
+    }
+
+  /* set the bridge domain flag */
+  if (age > 255)
+    {
+      error =
+	clib_error_return (0, "mac aging time cannot be bigger than 255");
+      goto done;
+    }
+  bd_set_mac_age (vm, bd_index, (u8) age);
+
+done:
+  return error;
+}
+
+/*?
+ * Layer 2 mac aging can be enabled and disabled on each
+ * bridge-domain. Use this command to set or disable mac aging
+ * on specific bridge-domains. It is disabled by default.
+ *
+ * @cliexpar
+ * Example of how to set mac aging (where 200 is the bridge-domain-id and
+ * 5 is aging time in minutes):
+ * @cliexcmd{set bridge-domain mac-age 200 5}
+ * Example of how to disable mac aging (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain flood 200 0}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_mac_age_cli, static) = {
+  .path = "set bridge-domain mac-age",
+  .short_help = "set bridge-domain mac-age <bridge-domain-id> <mins>",
+  .function = bd_mac_age,
+};
+/* *INDENT-ON* */
+
+/*?
+ * Modify whether or not an existing bridge-domain should terminate and respond
+ * to ARP Requests. ARP Termination is disabled by default.
+ *
+ * @cliexpar
+ * Example of how to enable ARP termination (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain arp term 200}
+ * Example of how to disable ARP termination (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain arp term 200 disable}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_arp_term_cli, static) = {
+  .path = "set bridge-domain arp term",
+  .short_help = "set bridge-domain arp term <bridge-domain-id> [disable]",
+  .function = bd_arp_term,
+};
+/* *INDENT-ON* */
+
+
+/**
+ * Add/delete IP address to MAC address mapping.
+ *
+ * The clib hash implementation stores uword entries in the hash table.
+ * The hash table mac_by_ip4 is keyed via IP4 address and store the
+ * 6-byte MAC address directly in the hash table entry uword.
+ *
+ * @warning This only works for 64-bit processor with 8-byte uword;
+ * which means this code *WILL NOT WORK* for a 32-bit prcessor with
+ * 4-byte uword.
+ */
+u32
+bd_add_del_ip_mac (u32 bd_index,
+		   u8 * ip_addr, u8 * mac_addr, u8 is_ip6, u8 is_add)
+{
+  l2input_main_t *l2im = &l2input_main;
+  l2_bridge_domain_t *bd_cfg = l2input_bd_config_from_index (l2im, bd_index);
+  u64 new_mac = *(u64 *) mac_addr;
+  u64 *old_mac;
+  u16 *mac16 = (u16 *) & new_mac;
+
+  ASSERT (sizeof (uword) == sizeof (u64));	/* make sure uword is 8 bytes */
+
+  mac16[3] = 0;			/* Clear last 2 unsed bytes of the 8-byte MAC address */
+  if (is_ip6)
+    {
+      ip6_address_t *ip6_addr_key;
+      hash_pair_t *hp;
+      old_mac = (u64 *) hash_get_mem (bd_cfg->mac_by_ip6, ip_addr);
+      if (is_add)
+	{
+	  if (old_mac == 0)
+	    {			/* new entry - allocate and craete ip6 address key */
+	      ip6_addr_key = clib_mem_alloc (sizeof (ip6_address_t));
+	      clib_memcpy (ip6_addr_key, ip_addr, sizeof (ip6_address_t));
+	    }
+	  else if (*old_mac == new_mac)
+	    {			/* same mac entry already exist for ip6 address */
+	      return 0;
+	    }
+	  else
+	    {			/* updat mac for ip6 address */
+	      hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr);
+	      ip6_addr_key = (ip6_address_t *) hp->key;
+	    }
+	  hash_set_mem (bd_cfg->mac_by_ip6, ip6_addr_key, new_mac);
+	}
+      else
+	{
+	  if (old_mac && (*old_mac == new_mac))
+	    {
+	      hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr);
+	      ip6_addr_key = (ip6_address_t *) hp->key;
+	      hash_unset_mem (bd_cfg->mac_by_ip6, ip_addr);
+	      clib_mem_free (ip6_addr_key);
+	    }
+	  else
+	    return 1;
+	}
+    }
+  else
+    {
+      ip4_address_t ip4_addr = *(ip4_address_t *) ip_addr;
+      old_mac = (u64 *) hash_get (bd_cfg->mac_by_ip4, ip4_addr.as_u32);
+      if (is_add)
+	{
+	  if (old_mac && (*old_mac == new_mac))
+	    return 0;		/* mac entry already exist */
+	  hash_set (bd_cfg->mac_by_ip4, ip4_addr.as_u32, new_mac);
+	}
+      else
+	{
+	  if (old_mac && (*old_mac == new_mac))
+	    hash_unset (bd_cfg->mac_by_ip4, ip4_addr.as_u32);
+	  else
+	    return 1;
+	}
+    }
+  return 0;
+}
+
+/**
+    Set bridge-domain arp entry add/delete.
+    The CLI format is:
+    set bridge-domain arp entry <bridge-domain-id> <ip-addr> <mac-addr> [del]
+*/
+static clib_error_t *
+bd_arp_entry (vlib_main_t * vm,
+	      unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index, bd_id;
+  u8 is_add = 1;
+  u8 is_ip6 = 0;
+  u8 ip_addr[16];
+  u8 mac_addr[6];
+  uword *p;
+
+  if (!unformat (input, "%d", &bd_id))
+    {
+      error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+
+  if (p)
+    bd_index = *p;
+  else
+    return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+  if (unformat (input, "%U", unformat_ip4_address, ip_addr))
+    {
+      is_ip6 = 0;
+    }
+  else if (unformat (input, "%U", unformat_ip6_address, ip_addr))
+    {
+      is_ip6 = 1;
+    }
+  else
+    {
+      error = clib_error_return (0, "expecting IP address but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  if (!unformat (input, "%U", unformat_ethernet_address, mac_addr))
+    {
+      error = clib_error_return (0, "expecting MAC address but got `%U'",
+				 format_unformat_error, input);
+      goto done;
+    }
+
+  if (unformat (input, "del"))
+    {
+      is_add = 0;
+    }
+
+  /* set the bridge domain flagAdd IP-MAC entry into bridge domain */
+  if (bd_add_del_ip_mac (bd_index, ip_addr, mac_addr, is_ip6, is_add))
+    {
+      error = clib_error_return (0, "MAC %s for IP %U and MAC %U failed",
+				 is_add ? "add" : "del",
+				 is_ip6 ?
+				 format_ip4_address : format_ip6_address,
+				 ip_addr, format_ethernet_address, mac_addr);
+    }
+
+done:
+  return error;
+}
+
+/*?
+ * Add an ARP entry to an existing bridge-domain.
+ *
+ * @cliexpar
+ * Example of how to add an ARP entry (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a}
+ * Example of how to delete an ARP entry (where 200 is the bridge-domain-id):
+ * @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a del}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_arp_entry_cli, static) = {
+  .path = "set bridge-domain arp entry",
+  .short_help = "set bridge-domain arp entry <bridge-domain-id> <ip-addr> <mac-addr> [del]",
+  .function = bd_arp_entry,
+};
+/* *INDENT-ON* */
+
+u8 *
+format_vtr (u8 * s, va_list * args)
+{
+  u32 vtr_op = va_arg (*args, u32);
+  u32 dot1q = va_arg (*args, u32);
+  u32 tag1 = va_arg (*args, u32);
+  u32 tag2 = va_arg (*args, u32);
+  switch (vtr_op)
+    {
+    case L2_VTR_DISABLED:
+      return format (s, "none");
+    case L2_VTR_PUSH_1:
+      return format (s, "push-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
+    case L2_VTR_PUSH_2:
+      return format (s, "push-2 %s %d %d", dot1q ? "dot1q" : "dot1ad", tag1,
+		     tag2);
+    case L2_VTR_POP_1:
+      return format (s, "pop-1");
+    case L2_VTR_POP_2:
+      return format (s, "pop-2");
+    case L2_VTR_TRANSLATE_1_1:
+      return format (s, "trans-1-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
+    case L2_VTR_TRANSLATE_1_2:
+      return format (s, "trans-1-2 %s %d %d", dot1q ? "dot1q" : "dot1ad",
+		     tag1, tag2);
+    case L2_VTR_TRANSLATE_2_1:
+      return format (s, "trans-2-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
+    case L2_VTR_TRANSLATE_2_2:
+      return format (s, "trans-2-2 %s %d %d", dot1q ? "dot1q" : "dot1ad",
+		     tag1, tag2);
+    default:
+      return format (s, "none");
+    }
+}
+
+/**
+   Show bridge-domain state.
+   The CLI format is:
+   show bridge-domain [<bd_index>]
+*/
+static clib_error_t *
+bd_show (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+  vnet_main_t *vnm = vnet_get_main ();
+  bd_main_t *bdm = &bd_main;
+  clib_error_t *error = 0;
+  u32 bd_index = ~0;
+  l2_bridge_domain_t *bd_config;
+  u32 start, end;
+  u32 printed;
+  u32 detail = 0;
+  u32 intf = 0;
+  u32 arp = 0;
+  u32 bd_id = ~0;
+  uword *p;
+
+  start = 0;
+  end = vec_len (l2input_main.bd_configs);
+
+  if (unformat (input, "%d", &bd_id))
+    {
+      if (unformat (input, "detail"))
+	detail = 1;
+      else if (unformat (input, "det"))
+	detail = 1;
+      if (unformat (input, "int"))
+	intf = 1;
+      if (unformat (input, "arp"))
+	arp = 1;
+
+      p = hash_get (bdm->bd_index_by_bd_id, bd_id);
+      if (p)
+	bd_index = *p;
+      else
+	return clib_error_return (0, "No such bridge domain %d", bd_id);
+
+      vec_validate (l2input_main.bd_configs, bd_index);
+      bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
+      if (bd_is_valid (bd_config))
+	{
+	  start = bd_index;
+	  end = start + 1;
+	}
+      else
+	{
+	  vlib_cli_output (vm, "bridge-domain %d not in use", bd_id);
+	  goto done;
+	}
+    }
+
+  /* Show all bridge-domains that have been initialized */
+  printed = 0;
+  for (bd_index = start; bd_index < end; bd_index++)
+    {
+      bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
+      if (bd_is_valid (bd_config))
+	{
+	  if (!printed)
+	    {
+	      printed = 1;
+	      vlib_cli_output (vm,
+			       "%=5s %=7s %=10s %=10s %=10s %=10s %=10s %=14s",
+			       "ID", "Index", "Learning", "U-Forwrd",
+			       "UU-Flood", "Flooding", "ARP-Term",
+			       "BVI-Intf");
+	    }
+
+	  vlib_cli_output (vm,
+			   "%=5d %=7d %=10s %=10s %=10s %=10s %=10s %=14U",
+			   bd_config->bd_id, bd_index,
+			   bd_config->feature_bitmap & L2INPUT_FEAT_LEARN ?
+			   "on" : "off",
+			   bd_config->feature_bitmap & L2INPUT_FEAT_FWD ? "on"
+			   : "off",
+			   bd_config->feature_bitmap & L2INPUT_FEAT_UU_FLOOD ?
+			   "on" : "off",
+			   bd_config->feature_bitmap & L2INPUT_FEAT_FLOOD ?
+			   "on" : "off",
+			   bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM ?
+			   "on" : "off", format_vnet_sw_if_index_name_with_NA,
+			   vnm, bd_config->bvi_sw_if_index);
+
+	  if (detail || intf)
+	    {
+	      /* Show all member interfaces */
+	      int i;
+	      vec_foreach_index (i, bd_config->members)
+	      {
+		l2_flood_member_t *member =
+		  vec_elt_at_index (bd_config->members, i);
+		u32 vtr_opr, dot1q, tag1, tag2;
+		if (i == 0)
+		  {
+		    vlib_cli_output (vm, "\n%=30s%=7s%=5s%=5s%=9s%=30s",
+				     "Interface", "Index", "SHG", "BVI",
+				     "TxFlood", "VLAN-Tag-Rewrite");
+		  }
+		l2vtr_get (vm, vnm, member->sw_if_index, &vtr_opr, &dot1q,
+			   &tag1, &tag2);
+		vlib_cli_output (vm, "%=30U%=7d%=5d%=5s%=9s%=30U",
+				 format_vnet_sw_if_index_name, vnm,
+				 member->sw_if_index, member->sw_if_index,
+				 member->shg,
+				 member->flags & L2_FLOOD_MEMBER_BVI ? "*" :
+				 "-", i < bd_config->flood_count ? "*" : "-",
+				 format_vtr, vtr_opr, dot1q, tag1, tag2);
+	      }
+	    }
+
+	  if ((detail || arp) &&
+	      (bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM))
+	    {
+	      u32 ip4_addr;
+	      ip6_address_t *ip6_addr;
+	      u64 mac_addr;
+	      vlib_cli_output (vm,
+			       "\n  IP4/IP6 to MAC table for ARP Termination");
+
+              /* *INDENT-OFF* */
+              hash_foreach (ip4_addr, mac_addr, bd_config->mac_by_ip4,
+              ({
+                vlib_cli_output (vm, "%=40U => %=20U",
+                                 format_ip4_address, &ip4_addr,
+                                 format_ethernet_address, &mac_addr);
+              }));
+
+              hash_foreach_mem (ip6_addr, mac_addr, bd_config->mac_by_ip6,
+              ({
+		vlib_cli_output (vm, "%=40U => %=20U",
+				 format_ip6_address, ip6_addr,
+				 format_ethernet_address, &mac_addr);
+              }));
+              /* *INDENT-ON* */
+	    }
+	}
+    }
+
+  if (!printed)
+    {
+      vlib_cli_output (vm, "no bridge-domains in use");
+    }
+
+done:
+  return error;
+}
+
+/*?
+ * Show a summary of all the bridge-domain instances or detailed view of a
+ * single bridge-domain. Bridge-domains are created by adding an interface
+ * to a bridge using the '<em>set interface l2 bridge</em>' command.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of displaying all bridge-domains:
+ * @cliexstart{show bridge-domain}
+ *  ID   Index   Learning   U-Forwrd   UU-Flood   Flooding   ARP-Term     BVI-Intf
+ *  0      0        off        off        off        off        off        local0
+ * 200     1        on         on         on         on         off          N/A
+ * @cliexend
+ *
+ * Example of displaying details of a single bridge-domains:
+ * @cliexstart{show bridge-domain 200 detail}
+ *  ID   Index   Learning   U-Forwrd   UU-Flood   Flooding   ARP-Term     BVI-Intf
+ * 200     1        on         on         on         on         off          N/A
+ *
+ *          Interface           Index  SHG  BVI        VLAN-Tag-Rewrite
+ *  GigabitEthernet0/8/0.200      3     0    -               none
+ *  GigabitEthernet0/9/0.200      4     0    -               none
+ * @cliexend
+ * @endparblock
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (bd_show_cli, static) = {
+  .path = "show bridge-domain",
+  .short_help = "show bridge-domain [bridge-domain-id [detail|int|arp]]",
+  .function = bd_show,
+};
+/* *INDENT-ON* */
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */