summaryrefslogtreecommitdiffstats
path: root/src/vnet/lldp/lldp_doc.md
diff options
context:
space:
mode:
authorDamjan Marion <damarion@cisco.com>2016-12-19 23:05:39 +0100
committerDamjan Marion <damarion@cisco.com>2016-12-28 12:25:14 +0100
commit7cd468a3d7dee7d6c92f69a0bb7061ae208ec727 (patch)
tree5de62f8dbd3a752f5a676ca600e43d2652d1ff1a /src/vnet/lldp/lldp_doc.md
parent696f1adec0df3b8f161862566dd9c86174302658 (diff)
Reorganize source tree to use single autotools instance
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>
Diffstat (limited to 'src/vnet/lldp/lldp_doc.md')
-rw-r--r--src/vnet/lldp/lldp_doc.md84
1 files changed, 84 insertions, 0 deletions
diff --git a/src/vnet/lldp/lldp_doc.md b/src/vnet/lldp/lldp_doc.md
new file mode 100644
index 00000000000..bac480a51d3
--- /dev/null
+++ b/src/vnet/lldp/lldp_doc.md
@@ -0,0 +1,84 @@
+# VPP Link Layer Discovery Protocol (LLDP) implementation {#lldp_doc}
+
+This is a memo intended to contain documentation of the VPP LLDP implementation
+Everything that is not directly obvious should come here.
+
+
+## LLDP
+LLDP is a link layer protocol to advertise the capabilities and current status of the system.
+
+There are 2 nodes handling LLDP
+
+1.) input-node which processes incoming packets and updates the local database
+2.) process-node which is responsible for sending out LLDP packets from VPP side
+
+
+### Configuration
+
+LLDP has a global configuration and a per-interface enable setting.
+
+Global configuration is modified using the "set lldp" command
+
+set lldp [system-name <string>] [tx-hold <value>] [tx-interval <value>]
+
+system-name: the name of the VPP system sent to peers in the system-name TLV
+tx-hold: multiplier for tx-interval when setting time-to-live (TTL) value in the LLDP packets (TTL = tx-hold * tx-interval + 1, if TTL > 65535, then TTL = 65535)
+tx-interval: time interval between sending out LLDP packets
+
+Per interface setting is done using the "set interface lldp" command
+
+set interface lldp <interface> (enable | disable)
+
+interface: the name of the interface for which to enable/disable LLDP
+
+
+### Configuration example
+
+Configure system-name as "VPP" and transmit interval to 10 seconds:
+
+set lldp system-name VPP tx-interval 10
+
+Enable LLDP on interface TenGigabitEthernet5/0/1
+
+set interface lldp TenGigabitEthernet5/0/1 enable
+
+
+### Operational data
+
+The list of LLDP-enabled interfaces which are up can be shown using "show lldp" command
+
+Example:
+DBGvpp# show lldp
+Local interface Peer chassis ID Remote port ID Last heard Last sent Status
+GigabitEthernet2/0/1 never 27.0s ago inactive
+TenGigabitEthernet5/0/1 8c:60:4f:dd:ca:52 Eth1/3/3 20.1s ago 18.3s ago active
+
+All LLDP configuration data with all LLDP-enabled interfaces can be shown using "show lldp detail" command
+
+Example:
+DBGvpp# show lldp detail
+LLDP configuration:
+Configured system name: vpp
+Configured tx-hold: 4
+Configured tx-interval: 30
+
+LLDP-enabled interface table:
+
+Interface name: GigabitEthernet2/0/1
+Interface/peer state: inactive(timeout)
+Last known peer chassis ID:
+Last known peer port ID:
+Last packet sent: 12.4s ago
+Last packet received: never
+
+Interface name: GigabitEthernet2/0/2
+Interface/peer state: interface down
+Last packet sent: never
+
+Interface name: TenGigabitEthernet5/0/1
+Interface/peer state: active
+Peer chassis ID: 8c:60:4f:dd:ca:52(MAC address)
+Remote port ID: Eth1/3/3(Locally assigned)
+Last packet sent: 3.6s ago
+Last packet received: 5.5s ago
+