summaryrefslogtreecommitdiffstats
path: root/test/doc/overview.rst
diff options
context:
space:
mode:
authorDave Wallace <dwallacelf@gmail.com>2021-08-12 18:36:02 -0400
committerAndrew Yourtchenko <ayourtch@gmail.com>2021-08-13 15:57:21 +0000
commitd170681b24724c522adaf1e2f4f0e1f3289dbf82 (patch)
tree07b818dde94aa45f2d50da86f5eea5af8659413b /test/doc/overview.rst
parent078d258034cef5b4ca74d9deb37b2684cc77d060 (diff)
tests docs: upgrade python packages
- Upgrade python package requirements for test & docs - Clean up docs generation warnings - Consolidate python requirements for docs in test requirements specs. - Upgrade pip Type: make Change-Id: I74a3924b43ed93d15b32ec9f6fc41ed1ba95b69b Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Diffstat (limited to 'test/doc/overview.rst')
-rw-r--r--test/doc/overview.rst67
1 files changed, 36 insertions, 31 deletions
diff --git a/test/doc/overview.rst b/test/doc/overview.rst
index 89e557f4518..0c07cb6111f 100644
--- a/test/doc/overview.rst
+++ b/test/doc/overview.rst
@@ -175,8 +175,8 @@ e.g. for the IPv4 address assigned to the VPP interface:
* local_ip4n - Local IPv4 address - raw, suitable as API parameter.
These addresses need to be configured in VPP to be usable using e.g.
-`config_ip4` API. Please see the documentation to `VppInterface` for more
-details.
+`VppInterface.config_ip4` API. Please see the documentation to
+`VppInterface` for more details.
By default, there is one remote address of each kind created for L3:
remote_ip4 and remote_ip6. If the test needs more addresses, because it's
@@ -195,9 +195,9 @@ using packet-generator interfaces, represented by the `VppPGInterface` class.
Packets are written into a temporary .pcap file, which is then read by the VPP
and the packets are injected into the VPP world.
-To add a list of packets to an interface, call the `add_stream` method on that
-interface. Once everything is prepared, call `pg_start` method to start
-the packet generator on the VPP side.
+To add a list of packets to an interface, call the `VppPGInterface.add_stream`
+method on that interface. Once everything is prepared, call `pg_start` method to
+start the packet generator on the VPP side.
VPP -> test framework
~~~~~~~~~~~~~~~~~~~~~
@@ -208,36 +208,41 @@ which is then read and analyzed by the |vtf|.
The following APIs are available to the test case for reading pcap files.
-* `get_capture`: this API is suitable for bulk & batch style of test, where
- a list of packets is prepared & sent, then the received packets are read
- and verified. The API needs the number of packets which are expected to
- be captured (ignoring filtered packets - see below) to know when the pcap
- file is completely written by the VPP. If using packet infos for verifying
- packets, then the counts of the packet infos can be automatically used
- by `get_capture` to get the proper count (in this case the default value
- None can be supplied as expected_count or ommitted altogether).
-* `wait_for_packet`: this API is suitable for interactive style of test,
- e.g. when doing session management, three-way handsakes, etc. This API waits
- for and returns a single packet, keeping the capture file in place
- and remembering context. Repeated invocations return following packets
- (or raise Exception if timeout is reached) from the same capture file
- (= packets arriving on the same interface).
-
-*NOTE*: it is not recommended to mix these APIs unless you understand how they
-work internally. None of these APIs rotate the pcap capture file, so calling
-e.g. `get_capture` after `wait_for_packet` will return already read packets.
-It is safe to switch from one API to another after calling `enable_capture`
-as that API rotates the capture file.
+* `VppPGInterface.get_capture`: this API is suitable for bulk & batch
+ style of test, where a list of packets is prepared & sent, then the
+ received packets are read and verified. The API needs the number of
+ packets which are expected to be captured (ignoring filtered
+ packets - see below) to know when the pcap file is completely
+ written by the VPP. If using packet infos for verifying packets,
+ then the counts of the packet infos can be automatically used by
+ `VppPGInterface.get_capture` to get the proper count (in this case
+ the default value None can be supplied as expected_count or ommitted
+ altogether).
+* `VppPGInterface.wait_for_packet`: this API is suitable for
+ interactive style of test, e.g. when doing session management,
+ three-way handshakes, etc. This API waits for and returns a single
+ packet, keeping the capture file in place and remembering
+ context. Repeated invocations return following packets (or raise
+ Exception if timeout is reached) from the same capture file (=
+ packets arriving on the same interface).
+
+*NOTE*: it is not recommended to mix these APIs unless you understand
+how they work internally. None of these APIs rotate the pcap capture
+file, so calling e.g. `VppPGInterface.get_capture` after
+`VppPGInterface.wait_for_packet` will return already read packets. It
+is safe to switch from one API to another after calling
+`VppPGInterface.enable_capture` as that API rotates the capture file.
Automatic filtering of packets:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Both APIs (`get_capture` and `wait_for_packet`) by default filter the packet
-capture, removing known uninteresting packets from it - these are IPv6 Router
-Advertisments and IPv6 Router Alerts. These packets are unsolicitated
-and from the point of |vtf| are random. If a test wants to receive these
-packets, it should specify either None or a custom filtering function
-as the value to the 'filter_out_fn' argument.
+Both APIs (`VppPGInterface.get_capture` and
+`VppPGInterface.wait_for_packet`) by default filter the packet
+capture, removing known uninteresting packets from it - these are IPv6
+Router Advertisments and IPv6 Router Alerts. These packets are
+unsolicitated and from the point of |vtf| are random. If a test wants
+to receive these packets, it should specify either None or a custom
+filtering function as the value to the 'filter_out_fn' argument.
Common API flow for sending/receiving packets:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~