BFD: loop back echo packets

Change-Id: I772b63ac25ebfccaff9ab9d8d0b1445e85f21df7
Signed-off-by: Klement Sekera <ksekera@cisco.com>

1 files changed, 103 insertions, 19 deletions

diff --git a/test/test_bfd.py b/test/test_bfd.py
index 0ba0b46dee8..64e9301ac5f 100644
--- a/test/test_bfd.py
+++ b/test/test_bfd.py
@@ -8,6 +8,7 @@ import binascii
 import time
 from random import randint, shuffle
 from socket import AF_INET, AF_INET6
+from scapy.packet import Raw
 from scapy.layers.l2 import Ether
 from scapy.layers.inet import UDP, IP
 from scapy.layers.inet6 import IPv6
@@ -836,7 +837,6 @@ class BFD4TestCase(VppTestCase):
 
     def test_no_periodic_if_remote_demand(self):
         """ no periodic frames outside poll sequence if remote demand set """
-        self.test_session.update(detect_mult=10)
         bfd_session_up(self)
         demand = self.test_session.create_packet()
         demand[BFD].flags = "D"
@@ -846,7 +846,7 @@ class BFD4TestCase(VppTestCase):
                   self.test_session.desired_min_tx) \
             / USEC_IN_SEC
         count = 0
-        for dummy in range(self.test_session.detect_mult):
+        for dummy in range(self.test_session.detect_mult * 2):
             time.sleep(transmit_time)
             self.test_session.send_packet(demand)
             try:
@@ -861,6 +861,48 @@ class BFD4TestCase(VppTestCase):
         self.assert_equal(count, 0, "number of packets received")
         self.assert_equal(len(events), 0, "number of events received")
 
+    def test_echo_looped_back(self):
+        """ echo packets looped back """
+        # don't need a session in this case..
+        self.vpp_session.remove_vpp_config()
+        self.pg0.enable_capture()
+        echo_packet_count = 10
+        # random source port low enough to increment a few times..
+        udp_sport_tx = randint(1, 50000)
+        udp_sport_rx = udp_sport_tx
+        echo_packet = (Ether(src=self.pg0.remote_mac,
+                             dst=self.pg0.local_mac) /
+                       IP(src=self.pg0.remote_ip4,
+                          dst=self.pg0.local_ip4) /
+                       UDP(dport=BFD.udp_dport_echo) /
+                       Raw("this should be looped back"))
+        for dummy in range(echo_packet_count):
+            self.sleep(.01, "delay between echo packets")
+            echo_packet[UDP].sport = udp_sport_tx
+            udp_sport_tx += 1
+            self.logger.debug(ppp("Sending packet:", echo_packet))
+            self.pg0.add_stream(echo_packet)
+            self.pg_start()
+        for dummy in range(echo_packet_count):
+            p = self.pg0.wait_for_packet(1)
+            self.logger.debug(ppp("Got packet:", p))
+            ether = p[Ether]
+            self.assert_equal(self.pg0.remote_mac,
+                              ether.dst, "Destination MAC")
+            self.assert_equal(self.pg0.local_mac, ether.src, "Source MAC")
+            ip = p[IP]
+            self.assert_equal(self.pg0.remote_ip4, ip.dst, "Destination IP")
+            self.assert_equal(self.pg0.local_ip4, ip.src, "Destination IP")
+            udp = p[UDP]
+            self.assert_equal(udp.dport, BFD.udp_dport_echo,
+                              "UDP destination port")
+            self.assert_equal(udp.sport, udp_sport_rx, "UDP source port")
+            udp_sport_rx += 1
+            self.assertTrue(p.haslayer(Raw) and p[Raw] == echo_packet[Raw],
+                            "Received packet is not the echo packet sent")
+        self.assert_equal(udp_sport_tx, udp_sport_rx, "UDP source port (== "
+                          "ECHO packet identifier for test purposes)")
+
 
 class BFD6TestCase(VppTestCase):
     """Bidirectional Forwarding Detection (BFD) (IPv6) """
@@ -914,13 +956,55 @@ class BFD6TestCase(VppTestCase):
     def test_hold_up(self):
         """ hold BFD session up """
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             wait_for_bfd_packet(self)
             self.test_session.send_packet()
         self.assert_equal(len(self.vapi.collect_events()), 0,
                           "number of bfd events")
         self.assert_equal(self.vpp_session.state, BFDState.up, BFDState)
 
+    def test_echo_looped_back(self):
+        """ echo packets looped back """
+        # don't need a session in this case..
+        self.vpp_session.remove_vpp_config()
+        self.pg0.enable_capture()
+        echo_packet_count = 10
+        # random source port low enough to increment a few times..
+        udp_sport_tx = randint(1, 50000)
+        udp_sport_rx = udp_sport_tx
+        echo_packet = (Ether(src=self.pg0.remote_mac,
+                             dst=self.pg0.local_mac) /
+                       IPv6(src=self.pg0.remote_ip6,
+                            dst=self.pg0.local_ip6) /
+                       UDP(dport=BFD.udp_dport_echo) /
+                       Raw("this should be looped back"))
+        for dummy in range(echo_packet_count):
+            self.sleep(.01, "delay between echo packets")
+            echo_packet[UDP].sport = udp_sport_tx
+            udp_sport_tx += 1
+            self.logger.debug(ppp("Sending packet:", echo_packet))
+            self.pg0.add_stream(echo_packet)
+            self.pg_start()
+        for dummy in range(echo_packet_count):
+            p = self.pg0.wait_for_packet(1)
+            self.logger.debug(ppp("Got packet:", p))
+            ether = p[Ether]
+            self.assert_equal(self.pg0.remote_mac,
+                              ether.dst, "Destination MAC")
+            self.assert_equal(self.pg0.local_mac, ether.src, "Source MAC")
+            ip = p[IPv6]
+            self.assert_equal(self.pg0.remote_ip6, ip.dst, "Destination IP")
+            self.assert_equal(self.pg0.local_ip6, ip.src, "Destination IP")
+            udp = p[UDP]
+            self.assert_equal(udp.dport, BFD.udp_dport_echo,
+                              "UDP destination port")
+            self.assert_equal(udp.sport, udp_sport_rx, "UDP source port")
+            udp_sport_rx += 1
+            self.assertTrue(p.haslayer(Raw) and p[Raw] == echo_packet[Raw],
+                            "Received packet is not the echo packet sent")
+        self.assert_equal(udp_sport_tx, udp_sport_rx, "UDP source port (== "
+                          "ECHO packet identifier for test purposes)")
+
 
 class BFDSHA1TestCase(VppTestCase):
     """Bidirectional Forwarding Detection (BFD) (SHA1 auth) """
@@ -982,7 +1066,7 @@ class BFDSHA1TestCase(VppTestCase):
             self, self.pg0, AF_INET, sha1_key=key,
             bfd_key_id=self.vpp_session.bfd_key_id)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             wait_for_bfd_packet(self)
             self.test_session.send_packet()
         self.assert_equal(self.vpp_session.state, BFDState.up, BFDState)
@@ -1195,14 +1279,14 @@ class BFDAuthOnOffTestCase(VppTestCase):
         self.vpp_session.admin_up()
         self.test_session = BFDTestSession(self, self.pg0, AF_INET)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.vpp_session.activate_auth(key)
         self.test_session.bfd_key_id = self.vpp_session.bfd_key_id
         self.test_session.sha1_key = key
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
@@ -1223,7 +1307,7 @@ class BFDAuthOnOffTestCase(VppTestCase):
             bfd_key_id=self.vpp_session.bfd_key_id)
         bfd_session_up(self)
         # self.vapi.want_bfd_events(enable_disable=0)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.inc_seq_num()
@@ -1231,7 +1315,7 @@ class BFDAuthOnOffTestCase(VppTestCase):
         self.vpp_session.deactivate_auth()
         self.test_session.bfd_key_id = None
         self.test_session.sha1_key = None
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.inc_seq_num()
@@ -1254,14 +1338,14 @@ class BFDAuthOnOffTestCase(VppTestCase):
             self, self.pg0, AF_INET, sha1_key=key1,
             bfd_key_id=self.vpp_session.bfd_key_id)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.vpp_session.activate_auth(key2)
         self.test_session.bfd_key_id = self.vpp_session.bfd_key_id
         self.test_session.sha1_key = key2
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
@@ -1279,18 +1363,18 @@ class BFDAuthOnOffTestCase(VppTestCase):
         self.vpp_session.admin_up()
         self.test_session = BFDTestSession(self, self.pg0, AF_INET)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             wait_for_bfd_packet(self)
             self.test_session.send_packet()
         self.vpp_session.activate_auth(key, delayed=True)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.test_session.bfd_key_id = self.vpp_session.bfd_key_id
         self.test_session.sha1_key = key
         self.test_session.send_packet()
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
@@ -1310,19 +1394,19 @@ class BFDAuthOnOffTestCase(VppTestCase):
             self, self.pg0, AF_INET, sha1_key=key,
             bfd_key_id=self.vpp_session.bfd_key_id)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.vpp_session.deactivate_auth(delayed=True)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.test_session.bfd_key_id = None
         self.test_session.sha1_key = None
         self.test_session.send_packet()
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
@@ -1344,19 +1428,19 @@ class BFDAuthOnOffTestCase(VppTestCase):
             self, self.pg0, AF_INET, sha1_key=key1,
             bfd_key_id=self.vpp_session.bfd_key_id)
         bfd_session_up(self)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.vpp_session.activate_auth(key2, delayed=True)
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()
         self.test_session.bfd_key_id = self.vpp_session.bfd_key_id
         self.test_session.sha1_key = key2
         self.test_session.send_packet()
-        for dummy in range(self.test_session.detect_mult*2):
+        for dummy in range(self.test_session.detect_mult * 2):
             p = wait_for_bfd_packet(self)
             self.assert_equal(p[BFD].state, BFDState.up, BFDState)
             self.test_session.send_packet()