summaryrefslogtreecommitdiffstats
path: root/test/test_flowprobe.py
diff options
context:
space:
mode:
authorAlexander Chernavin <achernavin@netgate.com>2023-10-11 12:15:55 +0000
committerMatthew Smith <mgsmith@netgate.com>2023-10-12 22:15:20 +0000
commit120095d3d33bfac64c1f3c870f8a332eeaf638f0 (patch)
tree89732bda264b2aabbdc887e70c07c21c948ace1c /test/test_flowprobe.py
parent006c071b0a5f0bfc1302bad17cf018792ea2f712 (diff)
flowprobe: fix sending L2 flows using L2_IP6 template
Currently, L2 flows are exported using L2_IP6 template if L3 or L4 recording is enabled on L2 datapath. That occurs because during feature enable, L2 template is added and its ID is not saved immediately. Then L2_IP4 and L2_IP6 templates are added overwriting "template_id" each time. And in the end, the current value of "template_id" is saved for L2 template. The problem is that "template_id" at that point contains the ID of L2_IP6 template. With this fix, save the template ID immediately after adding a template for all variants (datapaths). Also, cover the case with a test. Type: fix Change-Id: Id27288043b3b8f0e89e77f45ae9a01fa7439e20e Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Diffstat (limited to 'test/test_flowprobe.py')
-rw-r--r--test/test_flowprobe.py70
1 files changed, 68 insertions, 2 deletions
diff --git a/test/test_flowprobe.py b/test/test_flowprobe.py
index 1d565dcf0a4..19571f71235 100644
--- a/test/test_flowprobe.py
+++ b/test/test_flowprobe.py
@@ -11,6 +11,7 @@ from scapy.packet import Raw
from scapy.layers.l2 import Ether
from scapy.layers.inet import IP, TCP, UDP
from scapy.layers.inet6 import IPv6
+from scapy.contrib.lacp import SlowProtocol, LACP
from config import config
from framework import tag_fixme_vpp_workers, tag_fixme_ubuntu2204, tag_fixme_debian11
@@ -273,9 +274,9 @@ class MethodHolder(VppTestCase):
if self.debug_print:
print(data)
if ip_ver == "v4":
- ip_layer = capture[0][IP]
+ ip_layer = capture[0][IP] if capture[0].haslayer(IP) else None
else:
- ip_layer = capture[0][IPv6]
+ ip_layer = capture[0][IPv6] if capture[0].haslayer(IPv6) else None
if data_set is not None:
for record in data:
# skip flow if ingress/egress interface is 0
@@ -682,6 +683,71 @@ class DatapathTestsHolder(object):
ipfix.remove_vpp_config()
self.logger.info("FFP_TEST_FINISH_0002")
+ def test_L23onL2(self):
+ """L2/3 data on L2 datapath"""
+ self.pg_enable_capture(self.pg_interfaces)
+ self.pkts = []
+
+ ipfix = VppCFLOW(
+ test=self, intf=self.intf1, layer="l2 l3", direction=self.direction
+ )
+ ipfix.add_vpp_config()
+
+ ipfix_decoder = IPFIXDecoder()
+ # template packet should arrive immediately
+ templates = ipfix.verify_templates(ipfix_decoder, count=3)
+
+ # verify IPv4 and IPv6 flows
+ for ip_ver in ("v4", "v6"):
+ self.create_stream(packets=1, ip_ver=ip_ver)
+ capture = self.send_packets()
+
+ # make sure the one packet we expect actually showed up
+ self.vapi.ipfix_flush()
+ cflow = self.wait_for_cflow_packet(
+ self.collector, templates[1 if ip_ver == "v4" else 2]
+ )
+ src_ip_id = 8 if ip_ver == "v4" else 27
+ dst_ip_id = 12 if ip_ver == "v4" else 28
+ self.verify_cflow_data_detail(
+ ipfix_decoder,
+ capture,
+ cflow,
+ {
+ 2: "packets",
+ 256: 8 if ip_ver == "v4" else 56710,
+ 4: 17,
+ src_ip_id: "src_ip",
+ dst_ip_id: "dst_ip",
+ 61: (self.direction == "tx"),
+ },
+ ip_ver=ip_ver,
+ )
+
+ # verify non-IP flow
+ self.pkts = [
+ (
+ Ether(dst=self.pg2.local_mac, src=self.pg1.remote_mac)
+ / SlowProtocol()
+ / LACP()
+ )
+ ]
+ capture = self.send_packets()
+
+ # make sure the one packet we expect actually showed up
+ self.vapi.ipfix_flush()
+ cflow = self.wait_for_cflow_packet(self.collector, templates[0])
+ self.verify_cflow_data_detail(
+ ipfix_decoder,
+ capture,
+ cflow,
+ {2: "packets", 256: 2440, 61: (self.direction == "tx")},
+ )
+
+ self.collector.get_capture(6)
+
+ ipfix.remove_vpp_config()
+
def test_L4onL2(self):
"""L4 data on L2 datapath"""
self.logger.info("FFP_TEST_START_0003")