aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ip6.py
diff options
context:
space:
mode:
authorNeale Ranns <nranns@cisco.com>2017-04-21 01:07:59 -0700
committerDamjan Marion <dmarion.lists@gmail.com>2017-04-26 15:31:41 +0000
commit227038a444b98f922b4a4f44b85ae60f9ee86e1c (patch)
treed4268410e3f860bb01386f4242e023324885801d /test/test_ip6.py
parent9806eae1f5f3953f7ac2c5bd07061a94387d757e (diff)
IP Flow Hash Config fixes
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
Diffstat (limited to 'test/test_ip6.py')
-rw-r--r--test/test_ip6.py149
1 files changed, 149 insertions, 0 deletions
diff --git a/test/test_ip6.py b/test/test_ip6.py
index 3ba092305c5..ebeffe20461 100644
--- a/test/test_ip6.py
+++ b/test/test_ip6.py
@@ -1133,5 +1133,154 @@ class TestIPDisabled(VppTestCase):
self.send_and_assert_no_replies(self.pg1, pm, "IPv6 disabled")
+class TestIP6LoadBalance(VppTestCase):
+ """ IPv6 Load-Balancing """
+
+ def setUp(self):
+ super(TestIP6LoadBalance, self).setUp()
+
+ self.create_pg_interfaces(range(5))
+
+ for i in self.pg_interfaces:
+ i.admin_up()
+ i.config_ip6()
+ i.resolve_ndp()
+
+ def tearDown(self):
+ super(TestIP6LoadBalance, self).tearDown()
+ for i in self.pg_interfaces:
+ i.unconfig_ip6()
+ i.admin_down()
+
+ def send_and_expect_load_balancing(self, input, pkts, outputs):
+ input.add_stream(pkts)
+ self.pg_enable_capture(self.pg_interfaces)
+ self.pg_start()
+ for oo in outputs:
+ rx = oo._get_capture(1)
+ self.assertNotEqual(0, len(rx))
+
+ def test_ip6_load_balance(self):
+ """ IPv6 Load-Balancing """
+
+ #
+ # An array of packets that differ only in the destination port
+ #
+ port_pkts = []
+
+ #
+ # An array of packets that differ only in the source address
+ #
+ src_pkts = []
+
+ for ii in range(65):
+ port_pkts.append((Ether(src=self.pg0.remote_mac,
+ dst=self.pg0.local_mac) /
+ IPv6(dst="3000::1", src="3000:1::1") /
+ UDP(sport=1234, dport=1234 + ii) /
+ Raw('\xa5' * 100)))
+ src_pkts.append((Ether(src=self.pg0.remote_mac,
+ dst=self.pg0.local_mac) /
+ IPv6(dst="3000::1", src="3000:1::%d" % ii) /
+ UDP(sport=1234, dport=1234) /
+ Raw('\xa5' * 100)))
+
+ route_3000_1 = VppIpRoute(self, "3000::1", 128,
+ [VppRoutePath(self.pg1.remote_ip6,
+ self.pg1.sw_if_index,
+ is_ip6=1),
+ VppRoutePath(self.pg2.remote_ip6,
+ self.pg2.sw_if_index,
+ is_ip6=1)],
+ is_ip6=1)
+ route_3000_1.add_vpp_config()
+
+ #
+ # inject the packet on pg0 - expect load-balancing across the 2 paths
+ # - since the default hash config is to use IP src,dst and port
+ # src,dst
+ # We are not going to ensure equal amounts of packets across each link,
+ # since the hash algorithm is statistical and therefore this can never
+ # be guaranteed. But wuth 64 different packets we do expect some
+ # balancing. So instead just ensure there is traffic on each link.
+ #
+ self.send_and_expect_load_balancing(self.pg0, port_pkts,
+ [self.pg1, self.pg2])
+ self.send_and_expect_load_balancing(self.pg0, src_pkts,
+ [self.pg1, self.pg2])
+
+ #
+ # change the flow hash config so it's only IP src,dst
+ # - now only the stream with differing source address will
+ # load-balance
+ #
+ self.vapi.set_ip_flow_hash(0, is_ip6=1, src=1, dst=1, sport=0, dport=0)
+
+ self.send_and_expect_load_balancing(self.pg0, src_pkts,
+ [self.pg1, self.pg2])
+
+ self.pg0.add_stream(port_pkts)
+ self.pg_enable_capture(self.pg_interfaces)
+ self.pg_start()
+
+ rx = self.pg2.get_capture(len(port_pkts))
+
+ #
+ # change the flow hash config back to defaults
+ #
+ self.vapi.set_ip_flow_hash(0, is_ip6=1, src=1, dst=1, sport=1, dport=1)
+
+ #
+ # Recursive prefixes
+ # - testing that 2 stages of load-balancing occurs and there is no
+ # polarisation (i.e. only 2 of 4 paths are used)
+ #
+ port_pkts = []
+ src_pkts = []
+
+ for ii in range(257):
+ port_pkts.append((Ether(src=self.pg0.remote_mac,
+ dst=self.pg0.local_mac) /
+ IPv6(dst="4000::1", src="4000:1::1") /
+ UDP(sport=1234, dport=1234 + ii) /
+ Raw('\xa5' * 100)))
+ src_pkts.append((Ether(src=self.pg0.remote_mac,
+ dst=self.pg0.local_mac) /
+ IPv6(dst="4000::1", src="4000:1::%d" % ii) /
+ UDP(sport=1234, dport=1234) /
+ Raw('\xa5' * 100)))
+
+ route_3000_2 = VppIpRoute(self, "3000::2", 128,
+ [VppRoutePath(self.pg3.remote_ip6,
+ self.pg3.sw_if_index,
+ is_ip6=1),
+ VppRoutePath(self.pg4.remote_ip6,
+ self.pg4.sw_if_index,
+ is_ip6=1)],
+ is_ip6=1)
+ route_3000_2.add_vpp_config()
+
+ route_4000_1 = VppIpRoute(self, "4000::1", 128,
+ [VppRoutePath("3000::1",
+ 0xffffffff,
+ is_ip6=1),
+ VppRoutePath("3000::2",
+ 0xffffffff,
+ is_ip6=1)],
+ is_ip6=1)
+ route_4000_1.add_vpp_config()
+
+ #
+ # inject the packet on pg0 - expect load-balancing across all 4 paths
+ #
+ self.vapi.cli("clear trace")
+ self.send_and_expect_load_balancing(self.pg0, port_pkts,
+ [self.pg1, self.pg2,
+ self.pg3, self.pg4])
+ self.send_and_expect_load_balancing(self.pg0, src_pkts,
+ [self.pg1, self.pg2,
+ self.pg3, self.pg4])
+
+
if __name__ == '__main__':
unittest.main(testRunner=VppTestRunner)