IPSEC: tests use opbject registry

this means we test the dumps - to some extent

Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8
Signed-off-by: Neale Ranns <nranns@cisco.com>

1 files changed, 70 insertions, 51 deletions

diff --git a/test/test_ipsec_nat.py b/test/test_ipsec_nat.py
index 05befe481b4..aa6d87cb96e 100644
--- a/test/test_ipsec_nat.py
+++ b/test/test_ipsec_nat.py
@@ -7,6 +7,9 @@ from scapy.layers.inet import ICMP, IP, TCP, UDP
 from scapy.layers.ipsec import SecurityAssociation, ESP
 from util import ppp, ppc
 from template_ipsec import TemplateIpsec
+from vpp_ipsec import *
+from vpp_ip_route import VppIpRoute, VppRoutePath
+from vpp_ip import DpoProto
 
 
 class IPSecNATTestCase(TemplateIpsec):
@@ -34,16 +37,25 @@ class IPSecNATTestCase(TemplateIpsec):
     def setUp(self):
         super(IPSecNATTestCase, self).setUp()
         self.tun_if = self.pg0
-        self.vapi.ipsec_spd_add_del(self.tun_spd_id)
-        self.vapi.ipsec_interface_add_del_spd(self.tun_spd_id,
-                                              self.tun_if.sw_if_index)
+
+        self.tun_spd = VppIpsecSpd(self, self.tun_spd_id)
+        self.tun_spd.add_vpp_config()
+        VppIpsecSpdItfBinding(self, self.tun_spd,
+                              self.tun_if).add_vpp_config()
+
         p = self.ipv4_params
         self.config_esp_tun(p)
         self.logger.info(self.vapi.ppcli("show ipsec"))
-        src = socket.inet_pton(p.addr_type, p.remote_tun_if_host)
-        self.vapi.ip_add_del_route(src, p.addr_len,
-                                   self.tun_if.remote_addr_n[p.addr_type],
-                                   is_ipv6=p.is_ipv6)
+
+        d = DpoProto.DPO_PROTO_IP6 if p.is_ipv6 else DpoProto.DPO_PROTO_IP4
+        VppIpRoute(self,  p.remote_tun_if_host, p.addr_len,
+                   [VppRoutePath(self.tun_if.remote_addr[p.addr_type],
+                                 0xffffffff,
+                                 proto=d)],
+                   is_ip6=p.is_ipv6).add_vpp_config()
+
+    def tearDown(self):
+        super(IPSecNATTestCase, self).tearDown()
 
     def create_stream_plain(self, src_mac, dst_mac, src_ip, dst_ip):
         return [
@@ -142,50 +154,57 @@ class IPSecNATTestCase(TemplateIpsec):
         crypt_key = params.crypt_key
         addr_any = params.addr_any
         addr_bcast = params.addr_bcast
-        self.vapi.ipsec_sad_add_del_entry(scapy_tun_sa_id, scapy_tun_spi,
-                                          auth_algo_vpp_id, auth_key,
-                                          crypt_algo_vpp_id, crypt_key,
-                                          self.vpp_esp_protocol,
-                                          self.pg1.remote_addr_n[addr_type],
-                                          self.tun_if.remote_addr_n[addr_type],
-                                          udp_encap=1)
-        self.vapi.ipsec_sad_add_del_entry(vpp_tun_sa_id, vpp_tun_spi,
-                                          auth_algo_vpp_id, auth_key,
-                                          crypt_algo_vpp_id, crypt_key,
-                                          self.vpp_esp_protocol,
-                                          self.tun_if.remote_addr_n[addr_type],
-                                          self.pg1.remote_addr_n[addr_type],
-                                          udp_encap=1)
-        l_startaddr = r_startaddr = socket.inet_pton(addr_type, addr_any)
-        l_stopaddr = r_stopaddr = socket.inet_pton(addr_type, addr_bcast)
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, scapy_tun_sa_id,
-                                          l_startaddr, l_stopaddr, r_startaddr,
-                                          r_stopaddr,
-                                          protocol=socket.IPPROTO_ESP)
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, scapy_tun_sa_id,
-                                          l_startaddr, l_stopaddr, r_startaddr,
-                                          r_stopaddr, is_outbound=0,
-                                          protocol=socket.IPPROTO_ESP)
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, scapy_tun_sa_id,
-                                          l_startaddr, l_stopaddr, r_startaddr,
-                                          r_stopaddr, remote_port_start=4500,
-                                          remote_port_stop=4500,
-                                          protocol=socket.IPPROTO_UDP)
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, scapy_tun_sa_id,
-                                          l_startaddr, l_stopaddr, r_startaddr,
-                                          r_stopaddr, remote_port_start=4500,
-                                          remote_port_stop=4500,
-                                          protocol=socket.IPPROTO_UDP,
-                                          is_outbound=0)
-        l_startaddr = l_stopaddr = self.tun_if.remote_addr_n[addr_type]
-        r_startaddr = r_stopaddr = self.pg1.remote_addr_n[addr_type]
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, vpp_tun_sa_id,
-                                          l_startaddr, l_stopaddr, r_startaddr,
-                                          r_stopaddr, priority=10, policy=3,
-                                          is_outbound=0)
-        self.vapi.ipsec_spd_add_del_entry(self.tun_spd_id, scapy_tun_sa_id,
-                                          r_startaddr, r_stopaddr, l_startaddr,
-                                          l_stopaddr, priority=10, policy=3)
+
+        VppIpsecSA(self, scapy_tun_sa_id, scapy_tun_spi,
+                   auth_algo_vpp_id, auth_key,
+                   crypt_algo_vpp_id, crypt_key,
+                   self.vpp_esp_protocol,
+                   self.pg1.remote_addr[addr_type],
+                   self.tun_if.remote_addr[addr_type],
+                   udp_encap=1).add_vpp_config()
+        VppIpsecSA(self, vpp_tun_sa_id, vpp_tun_spi,
+                   auth_algo_vpp_id, auth_key,
+                   crypt_algo_vpp_id, crypt_key,
+                   self.vpp_esp_protocol,
+                   self.tun_if.remote_addr[addr_type],
+                   self.pg1.remote_addr[addr_type],
+                   udp_encap=1).add_vpp_config()
+
+        VppIpsecSpdEntry(self, self.tun_spd, scapy_tun_sa_id,
+                         addr_any, addr_bcast,
+                         addr_any, addr_bcast,
+                         socket.IPPROTO_ESP).add_vpp_config()
+        VppIpsecSpdEntry(self, self.tun_spd, scapy_tun_sa_id,
+                         addr_any, addr_bcast,
+                         addr_any, addr_bcast,
+                         socket.IPPROTO_ESP,
+                         is_outbound=0).add_vpp_config()
+        VppIpsecSpdEntry(self, self.tun_spd, scapy_tun_sa_id,
+                         addr_any, addr_bcast,
+                         addr_any, addr_bcast,
+                         socket.IPPROTO_UDP,
+                         remote_port_start=4500,
+                         remote_port_stop=4500).add_vpp_config()
+        VppIpsecSpdEntry(self, self.tun_spd, scapy_tun_sa_id,
+                         addr_any, addr_bcast,
+                         addr_any, addr_bcast,
+                         socket.IPPROTO_UDP,
+                         remote_port_start=4500,
+                         remote_port_stop=4500,
+                         is_outbound=0).add_vpp_config()
+        VppIpsecSpdEntry(self, self.tun_spd, vpp_tun_sa_id,
+                         self.tun_if.remote_addr[addr_type],
+                         self.tun_if.remote_addr[addr_type],
+                         self.pg1.remote_addr[addr_type],
+                         self.pg1.remote_addr[addr_type],
+                         0, priority=10, policy=3,
+                         is_outbound=0).add_vpp_config()
+        VppIpsecSpdEntry(self, self.tun_spd, scapy_tun_sa_id,
+                         self.pg1.remote_addr[addr_type],
+                         self.pg1.remote_addr[addr_type],
+                         self.tun_if.remote_addr[addr_type],
+                         self.tun_if.remote_addr[addr_type],
+                         0, priority=10, policy=3).add_vpp_config()
 
     def test_ipsec_nat_tun(self):
         """ IPSec/NAT tunnel test case """