srv6-as: Adding support for L2 traffic

Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785
Signed-off-by: Francois Clad <fclad@cisco.com>

1 files changed, 199 insertions, 0 deletions

diff --git a/test/test_srv6_as.py b/test/test_srv6_as.py
index 0e94bd97ce6..0fa838edd10 100644..100755
--- a/test/test_srv6_as.py
+++ b/test/test_srv6_as.py
@@ -162,6 +162,93 @@ class TestSRv6(VppTestCase):
             test_sid_index=0,
             rewrite_src_addr='a1::')
 
+    def test_SRv6_End_AS_L2_noSRH(self):
+        """ Test SRv6 End.AS behavior with L2 traffic and no SRH rewrite.
+        """
+        self.run_SRv6_End_AS_L2(
+            sid_list=['a1::', 'a2::a6', 'a3::'],
+            test_sid_index=1,
+            rewrite_src_addr='a2::')
+
+    def test_SRv6_End_AS_L2_SRH(self):
+        """ Test SRv6 End.AS behavior with L2 traffic and SRH rewrite.
+        """
+        self.run_SRv6_End_AS_L2(
+            sid_list=['a1::a6', 'a2::', 'a3::'],
+            test_sid_index=0,
+            rewrite_src_addr='a1::')
+
+    def run_SRv6_End_AS_L2(self, sid_list, test_sid_index, rewrite_src_addr):
+        """ Run SRv6 End.AS test with L2 traffic.
+        """
+        self.rewrite_src_addr = rewrite_src_addr
+        self.rewrite_sid_list = sid_list[test_sid_index + 1::]
+
+        # send traffic to one destination interface
+        # source and destination interfaces are IPv6 only
+        self.setup_interfaces(ipv6=[True, False])
+
+        # configure route to next segment
+        route = VppIpRoute(self, sid_list[test_sid_index + 1], 128,
+                           [VppRoutePath(self.pg0.remote_ip6,
+                                         self.pg0.sw_if_index,
+                                         proto=DpoProto.DPO_PROTO_IP6)],
+                           is_ip6=1)
+        route.add_vpp_config()
+
+        # configure SRv6 localSID behavior
+        cli_str = "sr localsid address " + sid_list[test_sid_index] \
+            + " behavior end.as" \
+            + " oif " + self.pg1.name \
+            + " iif " + self.pg1.name \
+            + " src " + self.rewrite_src_addr
+        for s in self.rewrite_sid_list:
+            cli_str += " next " + s
+        self.vapi.cli(cli_str)
+
+        # log the localsids
+        self.logger.debug(self.vapi.cli("show sr localsid"))
+
+        # send one packet per packet size
+        count = len(self.pg_packet_sizes)
+
+        # prepare L2 in SRv6 headers
+        packet_header1 = self.create_packet_header_IPv6_SRH_L2(
+                        sidlist=sid_list[::-1],
+                        segleft=len(sid_list) - test_sid_index - 1,
+                        vlan=0)
+
+        # generate packets (pg0->pg1)
+        pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1,
+                                   self.pg_packet_sizes, count)
+
+        # send packets and verify received packets
+        self.send_and_verify_pkts(self.pg0, pkts1, self.pg1,
+                                  self.compare_rx_tx_packet_End_AS_L2_out)
+
+        # log the localsid counters
+        self.logger.info(self.vapi.cli("show sr localsid"))
+
+        # prepare L2 header for returning packets
+        packet_header2 = self.create_packet_header_L2()
+
+        # generate returning packets (pg1->pg0)
+        pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2,
+                                   self.pg_packet_sizes, count)
+
+        # send packets and verify received packets
+        self.send_and_verify_pkts(self.pg1, pkts2, self.pg0,
+                                  self.compare_rx_tx_packet_End_AS_L2_in)
+
+        # log the localsid counters
+        self.logger.info(self.vapi.cli("show sr localsid"))
+
+        # remove SRv6 localSIDs
+        self.vapi.cli("sr localsid del address " + sid_list[test_sid_index])
+
+        # cleanup interfaces
+        self.teardown_interfaces()
+
     def run_SRv6_End_AS_IPv6(self, sid_list, test_sid_index, rewrite_src_addr):
         """ Run SRv6 End.AS test with IPv6 traffic.
         """
@@ -407,6 +494,53 @@ class TestSRv6(VppTestCase):
 
         self.logger.debug("packet verification: SUCCESS")
 
+    def compare_rx_tx_packet_End_AS_L2_in(self, tx_pkt, rx_pkt):
+        """ Compare input and output packet after passing End.AS
+
+        :param tx_pkt: transmitted packet
+        :param rx_pkt: received packet
+        """
+
+        # get first (outer) IPv6 header of rx'ed packet
+        rx_ip = rx_pkt.getlayer(IPv6)
+        rx_srh = None
+
+        tx_ether = tx_pkt.getlayer(Ether)
+
+        # expected segment-list (SRH order)
+        tx_seglist = self.rewrite_sid_list[::-1]
+
+        # received ip.src should be equal to SR Policy source
+        self.assertEqual(rx_ip.src, self.rewrite_src_addr)
+        # received ip.dst should be equal to expected sidlist[lastentry]
+        self.assertEqual(rx_ip.dst, tx_seglist[-1])
+
+        if len(tx_seglist) > 1:
+            # rx'ed packet should have SRH
+            self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+            # get SRH
+            rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
+            # rx'ed seglist should be equal to seglist
+            self.assertEqual(rx_srh.addresses, tx_seglist)
+            # segleft should be equal to size seglist-1
+            self.assertEqual(rx_srh.segleft, len(tx_seglist)-1)
+            # segleft should be equal to lastentry
+            self.assertEqual(rx_srh.segleft, rx_srh.lastentry)
+            # nh should be "No Next Header" (59)
+            self.assertEqual(rx_srh.nh, 59)
+            # get payload
+            payload = rx_srh.payload
+        else:
+            # rx'ed packet should NOT have SRH
+            self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+            # get payload
+            payload = rx_ip.payload
+
+        # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
+        self.assertEqual(Ether(str(payload)), tx_ether)
+
+        self.logger.debug("packet verification: SUCCESS")
+
     def compare_rx_tx_packet_End_AS_IPv6_out(self, tx_pkt, rx_pkt):
         """ Compare input and output packet after passing End.AS with IPv6
 
@@ -462,6 +596,29 @@ class TestSRv6(VppTestCase):
 
         self.logger.debug("packet verification: SUCCESS")
 
+    def compare_rx_tx_packet_End_AS_L2_out(self, tx_pkt, rx_pkt):
+        """ Compare input and output packet after passing End.AS with L2
+
+        :param tx_pkt: transmitted packet
+        :param rx_pkt: received packet
+        """
+
+        # get IPv4 header of rx'ed packet
+        rx_eth = rx_pkt.getlayer(Ether)
+
+        tx_ip = tx_pkt.getlayer(IPv6)
+        # we can't just get the 2nd Ether layer
+        # get the Raw content and dissect it as Ether
+        tx_eth1 = Ether(str(tx_pkt[Raw]))
+
+        # verify if rx'ed packet has no SRH
+        self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+
+        # the whole rx_eth pkt should be equal to tx_eth1
+        self.assertEqual(rx_eth, tx_eth1)
+
+        self.logger.debug("packet verification: SUCCESS")
+
     def create_stream(self, src_if, dst_if, packet_header, packet_sizes,
                       count):
         """Create SRv6 input packet stream for defined interface.
@@ -604,6 +761,48 @@ class TestSRv6(VppTestCase):
              UDP(sport=1234, dport=1234))
         return p
 
+    def create_packet_header_L2(self, vlan=0):
+        """Create packet header: L2 header
+
+        :param vlan: if vlan!=0 then add 802.1q header
+        """
+        # Note: the dst addr ('00:55:44:33:22:11') is used in
+        # the compare function compare_rx_tx_packet_T_Encaps_L2
+        # to detect presence of L2 in SRH payload
+        p = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+        etype = 0x8137  # IPX
+        if vlan:
+            # add 802.1q layer
+            p /= Dot1Q(vlan=vlan, type=etype)
+        else:
+            p.type = etype
+        return p
+
+    def create_packet_header_IPv6_SRH_L2(self, sidlist, segleft, vlan=0):
+        """Create packet header: L2 encapsulated in SRv6:
+        IPv6 header with SRH, L2
+
+        :param list sidlist: segment list of outer IPv6 SRH
+        :param int segleft: segments-left field of outer IPv6 SRH
+        :param vlan: L2 vlan; if vlan!=0 then add 802.1q header
+
+        Outer IPv6 destination address is set to sidlist[segleft]
+        IPv6 source address is 1234::1
+        """
+        eth = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+        etype = 0x8137  # IPX
+        if vlan:
+            # add 802.1q layer
+            eth /= Dot1Q(vlan=vlan, type=etype)
+        else:
+            eth.type = etype
+
+        p = (IPv6(src='1234::1', dst=sidlist[segleft]) /
+             IPv6ExtHdrSegmentRouting(addresses=sidlist,
+                                      segleft=segleft, nh=59) /
+             eth)
+        return p
+
     def get_payload_info(self, packet):
         """ Extract the payload_info from the packet
         """