aboutsummaryrefslogtreecommitdiffstats
path: root/test
diff options
context:
space:
mode:
authorFrancois Clad <fclad@cisco.com>2018-07-04 15:35:29 +0200
committerDamjan Marion <dmarion@me.com>2018-08-22 20:32:53 +0000
commit429542476578e947399b2f09f9e8dd5aa1ac0951 (patch)
tree2342b0eca2bde9e1da18c41ea60302fe961c856f /test
parentbcd4c4a2c48c9977e481dc189cc71874d15c8998 (diff)
srv6-ad: Adding support for L2 traffic
Change-Id: I3c14555113c2b58f3be629600051beb7f6716cfe Signed-off-by: Francois Clad <fclad@cisco.com>
Diffstat (limited to 'test')
-rw-r--r--test/test_srv6_ad.py174
1 files changed, 174 insertions, 0 deletions
diff --git a/test/test_srv6_ad.py b/test/test_srv6_ad.py
index 13979ba13a2..75d9d12da48 100644
--- a/test/test_srv6_ad.py
+++ b/test/test_srv6_ad.py
@@ -408,6 +408,136 @@ class TestSRv6(VppTestCase):
self.logger.debug("packet verification: SUCCESS")
+ def test_SRv6_End_AD_L2(self):
+ """ Test SRv6 End.AD behavior with L2 traffic.
+ """
+ self.src_addr = 'a0::'
+ self.sid_list = ['a1::', 'a2::a4', 'a3::']
+ self.test_sid_index = 1
+
+ # send traffic to one destination interface
+ # source and destination interfaces are IPv6 only
+ self.setup_interfaces(ipv6=[True, False])
+
+ # configure route to next segment
+ route = VppIpRoute(self, self.sid_list[self.test_sid_index + 1], 128,
+ [VppRoutePath(self.pg0.remote_ip6,
+ self.pg0.sw_if_index,
+ proto=DpoProto.DPO_PROTO_IP6)],
+ is_ip6=1)
+ route.add_vpp_config()
+
+ # configure SRv6 localSID behavior
+ cli_str = "sr localsid address " + \
+ self.sid_list[self.test_sid_index] + \
+ " behavior end.ad" + \
+ " oif " + self.pg1.name + \
+ " iif " + self.pg1.name
+ self.vapi.cli(cli_str)
+
+ # log the localsids
+ self.logger.debug(self.vapi.cli("show sr localsid"))
+
+ # send one packet per packet size
+ count = len(self.pg_packet_sizes)
+
+ # prepare L2 in SRv6 headers
+ packet_header1 = self.create_packet_header_IPv6_SRH_L2(
+ srcaddr=self.src_addr,
+ sidlist=self.sid_list[::-1],
+ segleft=len(self.sid_list) - self.test_sid_index - 1,
+ vlan=0)
+
+ # generate packets (pg0->pg1)
+ pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1,
+ self.pg_packet_sizes, count)
+
+ # send packets and verify received packets
+ self.send_and_verify_pkts(self.pg0, pkts1, self.pg1,
+ self.compare_rx_tx_packet_End_AD_L2_out)
+
+ # log the localsid counters
+ self.logger.info(self.vapi.cli("show sr localsid"))
+
+ # prepare L2 header for returning packets
+ packet_header2 = self.create_packet_header_L2()
+
+ # generate returning packets (pg1->pg0)
+ pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2,
+ self.pg_packet_sizes, count)
+
+ # send packets and verify received packets
+ self.send_and_verify_pkts(self.pg1, pkts2, self.pg0,
+ self.compare_rx_tx_packet_End_AD_L2_in)
+
+ # log the localsid counters
+ self.logger.info(self.vapi.cli("show sr localsid"))
+
+ # remove SRv6 localSIDs
+ cli_str = "sr localsid del address " + \
+ self.sid_list[self.test_sid_index]
+ self.vapi.cli(cli_str)
+
+ # cleanup interfaces
+ self.teardown_interfaces()
+
+ def compare_rx_tx_packet_End_AD_L2_out(self, tx_pkt, rx_pkt):
+ """ Compare input and output packet after passing End.AD with L2
+
+ :param tx_pkt: transmitted packet
+ :param rx_pkt: received packet
+ """
+
+ # get IPv4 header of rx'ed packet
+ rx_eth = rx_pkt.getlayer(Ether)
+
+ tx_ip = tx_pkt.getlayer(IPv6)
+ # we can't just get the 2nd Ether layer
+ # get the Raw content and dissect it as Ether
+ tx_eth1 = Ether(str(tx_pkt[Raw]))
+
+ # verify if rx'ed packet has no SRH
+ self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+
+ # the whole rx_eth pkt should be equal to tx_eth1
+ self.assertEqual(rx_eth, tx_eth1)
+
+ self.logger.debug("packet verification: SUCCESS")
+
+ def compare_rx_tx_packet_End_AD_L2_in(self, tx_pkt, rx_pkt):
+ """ Compare input and output packet after passing End.AD
+
+ :param tx_pkt: transmitted packet
+ :param rx_pkt: received packet
+ """
+
+ ####
+ # get first (outer) IPv6 header of rx'ed packet
+ rx_ip = rx_pkt.getlayer(IPv6)
+ # received ip.src should be equal to SR Policy source
+ self.assertEqual(rx_ip.src, self.src_addr)
+ # received ip.dst should be equal to expected sidlist next segment
+ self.assertEqual(rx_ip.dst, self.sid_list[self.test_sid_index + 1])
+
+ # rx'ed packet should have SRH
+ self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+
+ # get SRH
+ rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
+ # rx'ed seglist should be equal to SID-list in reversed order
+ self.assertEqual(rx_srh.addresses, self.sid_list[::-1])
+ # segleft should be equal to previous segleft value minus 1
+ self.assertEqual(rx_srh.segleft,
+ len(self.sid_list) - self.test_sid_index - 2)
+ # lastentry should be equal to the SID-list length minus 1
+ self.assertEqual(rx_srh.lastentry, len(self.sid_list) - 1)
+
+ # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
+ tx_ether = tx_pkt.getlayer(Ether)
+ self.assertEqual(Ether(str(rx_srh.payload)), tx_ether)
+
+ self.logger.debug("packet verification: SUCCESS")
+
def create_stream(self, src_if, dst_if, packet_header, packet_sizes,
count):
"""Create SRv6 input packet stream for defined interface.
@@ -547,6 +677,50 @@ class TestSRv6(VppTestCase):
UDP(sport=1234, dport=1234)
return p
+ def create_packet_header_L2(self, vlan=0):
+ """Create packet header: L2 header
+
+ :param vlan: if vlan!=0 then add 802.1q header
+ """
+ # Note: the dst addr ('00:55:44:33:22:11') is used in
+ # the compare function compare_rx_tx_packet_T_Encaps_L2
+ # to detect presence of L2 in SRH payload
+ p = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+ etype = 0x8137 # IPX
+ if vlan:
+ # add 802.1q layer
+ p /= Dot1Q(vlan=vlan, type=etype)
+ else:
+ p.type = etype
+ return p
+
+ def create_packet_header_IPv6_SRH_L2(self, srcaddr, sidlist, segleft,
+ vlan=0):
+ """Create packet header: L2 encapsulated in SRv6:
+ IPv6 header with SRH, L2
+
+ :param int srcaddr: IPv6 source address
+ :param list sidlist: segment list of outer IPv6 SRH
+ :param int segleft: segments-left field of outer IPv6 SRH
+ :param vlan: L2 vlan; if vlan!=0 then add 802.1q header
+
+ IPv6 source address is set to srcaddr
+ IPv6 destination address is set to sidlist[segleft]
+ """
+ eth = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+ etype = 0x8137 # IPX
+ if vlan:
+ # add 802.1q layer
+ eth /= Dot1Q(vlan=vlan, type=etype)
+ else:
+ eth.type = etype
+
+ p = IPv6(src=srcaddr, dst=sidlist[segleft]) / \
+ IPv6ExtHdrSegmentRouting(addresses=sidlist,
+ segleft=segleft, nh=59) / \
+ eth
+ return p
+
def get_payload_info(self, packet):
""" Extract the payload_info from the packet
"""