Reorganize source tree to use single autotools instance

Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>

3 files changed, 0 insertions, 144 deletions

diff --git a/vnet/etc/scripts/mpls-o-gre/dhcpd.conf b/vnet/etc/scripts/mpls-o-gre/dhcpd.conf
deleted file mode 100644
index f0f659cd55f..00000000000
--- a/vnet/etc/scripts/mpls-o-gre/dhcpd.conf
+++ /dev/null
@@ -1,116 +0,0 @@
-#
-# Sample configuration file for ISC dhcpd for Debian
-#
-# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
-# configuration file instead of this file.
-#
-#
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# option definitions common to all supported networks...
-option domain-name "example.org";
-option domain-name-servers ns1.example.org, ns2.example.org;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the 
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-#  range 10.254.239.10 10.254.239.20;
-#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-#  range dynamic-bootp 10.254.239.40 10.254.239.60;
-#  option broadcast-address 10.254.239.31;
-#  option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.fugue.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.fugue.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}
-subnet 6.0.0.0 netmask 255.255.0.0 {
-   range 6.0.2.2 6.0.2.5;
-   option routers 6.0.2.1;
-   default-lease-time 15;
-   max-lease-time 15;
-}
diff --git a/vnet/etc/scripts/mpls-o-gre/leftpeer.conf b/vnet/etc/scripts/mpls-o-gre/leftpeer.conf
deleted file mode 100644
index 149c70c068d..00000000000
--- a/vnet/etc/scripts/mpls-o-gre/leftpeer.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-comment { left linux ping target configure at e.g. 6.0.2.2/24 }
-
-set int ip table GigabitEthernet2/2/0 1
-set int ip address GigabitEthernet2/2/0 6.0.2.1/24
-set int state GigabitEthernet2/2/0 up
-
-comment { tunnel to rightpeer }
-set int ip address GigabitEthernet2/3/0 6.0.3.1/24
-set int state GigabitEthernet2/3/0 up
-
-mpls encap add label 30 fib 1 dest 6.0.3.3
-mpls decap add label 30 fib 1
-
-create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0
diff --git a/vnet/etc/scripts/mpls-o-gre/rightpeer.conf b/vnet/etc/scripts/mpls-o-gre/rightpeer.conf
deleted file mode 100644
index b5bb597db49..00000000000
--- a/vnet/etc/scripts/mpls-o-gre/rightpeer.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-comment { right linux ping target configure  e.g. 6.0.4.4/24 }
-
-set int ip table GigabitEthernet2/4/0 1
-set int ip address GigabitEthernet2/4/0 6.0.4.1/24
-set int state GigabitEthernet2/4/0 up
-
-comment { tunnel to leftpeer }
-set int ip address GigabitEthernet2/3/0 6.0.3.3/24
-set int state GigabitEthernet2/3/0 up
-
-mpls encap add label 30 fib 1 dest 6.0.3.1
-mpls decap add label 30 fib 1
-
-create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0