Initial commit of vpp code.v1.0.0

Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17
Signed-off-by: Ed Warnicke <eaw@cisco.com>

1 files changed, 389 insertions, 0 deletions

diff --git a/vnet/etc/scripts/virl/simple.virl b/vnet/etc/scripts/virl/simple.virl
new file mode 100644
index 00000000000..6033c42c36a
--- /dev/null
+++ b/vnet/etc/scripts/virl/simple.virl
@@ -0,0 +1,389 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
+    <extensions>
+        <entry key="management_network" type="String">flat</entry>
+    </extensions>
+    <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2">
+        <extensions>
+            <entry key="config" type="string">!
+! Last configuration change at 14:27:32 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-1
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+! 
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.2 255.255.255.255
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.167 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-1
+ ip address 10.0.0.5 255.255.255.252
+ ip ospf cost 1
+ duplex auto
+ speed auto
+ media-type rj45
+!
+router ospf 1
+ passive-interface Loopback0
+ network 10.0.0.4 0.0.0.3 area 0
+ network 192.168.0.2 0.0.0.0 area 0
+!
+router bgp 1
+ bgp router-id 192.168.0.2
+ bgp log-neighbor-changes
+ neighbor 192.168.0.3 remote-as 1
+ neighbor 192.168.0.3 description iBGP peer iosv-2
+ neighbor 192.168.0.3 update-source Loopback0
+ !
+ address-family ipv4
+  network 192.168.0.2 mask 255.255.255.255
+  neighbor 192.168.0.3 activate
+ exit-address-family
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+ip route 10.0.0.9 255.255.255.255 10.0.0.6
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+        </extensions>
+        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/>
+    </node>
+    <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3">
+        <extensions>
+            <entry key="config" type="string">!
+! Last configuration change at 14:26:58 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-2
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+! 
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.3 255.255.255.255
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.164 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-1
+ ip address 10.0.0.9 255.255.255.252
+ ip ospf cost 1
+ duplex auto
+ speed auto
+ media-type rj45
+!
+router ospf 1
+ passive-interface Loopback0
+ network 10.0.0.8 0.0.0.3 area 0
+ network 192.168.0.3 0.0.0.0 area 0
+!
+router bgp 1
+ bgp router-id 192.168.0.3
+ bgp log-neighbor-changes
+ neighbor 192.168.0.2 remote-as 1
+ neighbor 192.168.0.2 description iBGP peer iosv-1
+ neighbor 192.168.0.2 update-source Loopback0
+ !
+ address-family ipv4
+  network 192.168.0.3 mask 255.255.255.255
+  neighbor 192.168.0.2 activate
+ exit-address-family
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+ip route 10.0.0.5 255.255.255.255 10.0.0.10
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
+* education. IOSv is provided as-is and is not supported by Cisco's      *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any       *
+* purposes is expressly prohibited except as otherwise authorized by     *
+* Cisco in writing.                                                      *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+        </extensions>
+        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/>
+    </node>
+    <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217">
+        <extensions>
+            <entry key="config" type="string">#cloud-config
+bootcmd:
+- ln -s -t /etc/rc.d /etc/rc.local
+hostname: vpp-1
+manage_etc_hosts: true
+runcmd:
+- start ttyS0
+- systemctl start getty@ttyS0.service
+- systemctl start rc-local
+- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
+- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
+- service ssh restart
+- service sshd restart
+- sed -i 's/no-pci//' /cisco/etc/qn.conf
+- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
+users:
+- default
+- gecos: User configured by VIRL Configuration Engine 0.15.3
+  lock-passwd: false
+  name: cisco
+  plain-text-passwd: cisco
+  shell: /bin/bash
+  ssh-authorized-keys:
+  - VIRL-USER-SSH-PUBLIC-KEY
+  sudo: ALL=(ALL) ALL
+write_files:
+- path: /etc/init/ttyS0.conf
+  owner: root:root
+  content: |
+    # ttyS0 - getty
+    # This service maintains a getty on ttyS0 from the point the system is
+    # started until it is shut down again.
+    start on stopped rc or RUNLEVEL=[12345]
+    stop on runlevel [!12345]
+    respawn
+    exec /sbin/getty -L 115200 ttyS0 vt102
+  permissions: '0644'
+- path: /etc/systemd/system/dhclient@.service
+  content: |
+    [Unit]
+    Description=Run dhclient on %i interface
+    After=network.target
+    [Service]
+    Type=oneshot
+    ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
+    RemainAfterExit=yes
+  owner: root:root
+  permissions: '0644'
+- path: /cisco/etc/vpp-server.conf
+  owner: root:root
+  permissions: '0644'
+  content: |-
+    set interface ip address GigabitEthernet0/4/0 10.0.0.6/30
+    set interface state GigabitEthernet0/4/0 up
+    set interface ip address GigabitEthernet0/5/0 10.0.0.10/30
+    set interface state GigabitEthernet0/5/0 up
+</entry>
+        </extensions>
+        <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/>
+        <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/>
+    </node>
+    <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
+    <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/>
+</topology>