Initial commit of vpp code.v1.0.0

Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17
Signed-off-by: Ed Warnicke <eaw@cisco.com>

1 files changed, 123 insertions, 0 deletions

diff --git a/vnet/vnet/lisp-gpe/lisp_gpe_packet.h b/vnet/vnet/lisp-gpe/lisp_gpe_packet.h
new file mode 100644
index 00000000000..b3d96ed9d44
--- /dev/null
+++ b/vnet/vnet/lisp-gpe/lisp_gpe_packet.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef included_lisp_gpe_packet_h
+#define included_lisp_gpe_packet_h
+
+/*
+ *   From draft-lewis-lisp-gpe-02.txt
+ *
+ *  0                   1                   2                   3
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |N|L|E|V|I|P|R|O|Ver|      Reserved             | Next Protocol |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |                 Instance ID/Locator-Status-Bits               |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *   N: The N-bit is the nonce-present bit.  When this bit is set to 1,
+ *     the low-order 24 bits of the first 32 bits of the LISP header
+ *     contain a Nonce.  See Section 6.3.1 for details.  Both N- and
+ *     V-bits MUST NOT be set in the same packet.  If they are, a
+ *     decapsulating ETR MUST treat the 'Nonce/Map-Version' field as
+ *     having a Nonce value present.
+ *
+ *  L: The L-bit is the 'Locator-Status-Bits' field enabled bit.  When
+ *     this bit is set to 1, the Locator-Status-Bits in the second
+ *     32 bits of the LISP header are in use.
+ *
+ *  E: The E-bit is the echo-nonce-request bit.  This bit MUST be ignored
+ *     and has no meaning when the N-bit is set to 0.  When the N-bit is
+ *     set to 1 and this bit is set to 1, an ITR is requesting that the
+ *     nonce value in the 'Nonce' field be echoed back in LISP-
+ *     encapsulated packets when the ITR is also an ETR.  See
+ *     Section 6.3.1 for details.
+ *
+ *  V: The V-bit is the Map-Version present bit.  When this bit is set to
+ *     1, the N-bit MUST be 0.  Refer to Section 6.6.3 for more details.
+ *
+ *  I: The I-bit is the Instance ID bit.  See Section 5.5 for more
+ *     details.  When this bit is set to 1, the 'Locator-Status-Bits'
+ *     field is reduced to 8 bits and the high-order 24 bits are used as
+ *     an Instance ID.  If the L-bit is set to 0, then the low-order
+ *     8 bits are transmitted as zero and ignored on receipt.
+ *
+ * P Bit:  Flag bit 5 is defined as the Next Protocol bit.  The P bit
+ *    MUST be set to 1 to indicate the presence of the 8 bit next
+ *    protocol field.
+ *
+ *    P = 0 indicates that the payload MUST conform to LISP as defined
+ *    in [RFC6830].
+ *
+ *    Flag bit 5 was chosen as the P bit because this flag bit is
+ *    currently unallocated in LISP [RFC6830].
+ *
+ *  O: Flag bit 7 is defined as the O bit.  When the O bit is set to 1, the
+ *  packet is an OAM packet and OAM processing MUST occur.  The OAM
+ *  protocol details are out of scope for this document.  As with the
+ *  P-bit, bit 7 is currently a reserved flag in [RFC6830].
+ *
+ * Next Protocol Field:  The lower 8 bits of the first word are used to
+ *    carry a next protocol.  This next protocol field contains the
+ *    protocol of the encapsulated payload packet.
+ *
+ *    LISP [RFC6830] uses the lower 16 bits of the first word for either
+ *    a nonce, an echo-nonce ([RFC6830]) or to support map-versioning
+ *    ([RFC6834]).  These are all optional capabilities that are
+ *    indicated by setting the N, E, and the V bit respectively.
+ *
+ *    To maintain the desired data plane compatibility, when the P bit
+ *    is set, the N, E, and V bits MUST be set to zero.
+ *
+ * A new protocol registry will be requested from IANA for the Next
+ * Protocol field.  This draft defines the following Next Protocol
+ * values:
+ *
+ *    0x1 : IPv4
+ *    0x2 : IPv6
+ *    0x3 : Ethernet
+ *    0x4: Network Service Header
+ */
+ 
+typedef struct {
+  u8 flags;
+  u8 ver_res;
+  u8 res;
+  u8 next_protocol;
+  u32 iid;
+} lisp_gpe_header_t;
+
+#define foreach_lisp_gpe_flag_bit               \
+_(N, 0x80)                                      \
+_(L, 0x40)                                      \
+_(E, 0x20)                                      \
+_(V, 0x10)                                      \
+_(I, 0x08)                                      \
+_(P, 0x04)                                      \
+_(O, 0x01)
+
+typedef enum {
+#define _(n,v) LISP_GPE_FLAGS_##n = v,
+foreach_lisp_gpe_flag_bit
+#undef _
+} vnet_lisp_gpe_flag_bit_t;
+
+#define LISP_GPE_VERSION 0x0
+
+#define LISP_GPE_NEXT_PROTOCOL_IP4 0x1
+#define LISP_GPE_NEXT_PROTOCOL_IP6 0x2
+#define LISP_GPE_NEXT_PROTOCOL_ETHERNET 0x3
+#define LISP_GPE_NEXT_PROTOCOL_NSH 0x4
+
+#endif /* included_lisp_gpe_packet_h */