aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/about.rst4
-rw-r--r--docs/usecases/index.rst1
-rw-r--r--docs/usecases/vmxnet3.rst128
3 files changed, 131 insertions, 2 deletions
diff --git a/docs/about.rst b/docs/about.rst
index 0d8d8d94189..cd95bafbb7c 100644
--- a/docs/about.rst
+++ b/docs/about.rst
@@ -4,6 +4,6 @@
About
=====
-**VPP Version:** 19.01-rc0~459-geb6c799
+**VPP Version:** 19.01-rc0~497-g05ce4b8
-**Built on:** Wed Dec 12 19:37:08 GMT 2018
+**Built on:** Mon Dec 17 20:43:52 GMT 2018
diff --git a/docs/usecases/index.rst b/docs/usecases/index.rst
index 3dabd78ca06..614f0026094 100644
--- a/docs/usecases/index.rst
+++ b/docs/usecases/index.rst
@@ -12,6 +12,7 @@ extensive list, but should give a sampling of the many features contained in FD.
containers
simpleperf/index.rst
vhost/index.rst
+ vmxnet3
homegateway
contiv/index.rst
networksim
diff --git a/docs/usecases/vmxnet3.rst b/docs/usecases/vmxnet3.rst
new file mode 100644
index 00000000000..7e7210f83fc
--- /dev/null
+++ b/docs/usecases/vmxnet3.rst
@@ -0,0 +1,128 @@
+.. _vmxnet3:
+
+VPP with VMware/Vmxnet3
+=======================
+
+This section describes a native Vmxnet3 driver that is included with VPP.
+This driver is written as a plugin and is found in src/plugin/vmxnet3.
+
+Advantages
+----------
+
+The native VPP native vmxnet3 driver provides the following features
+that are not provided with the standard dpdk vmxnet3 driver.
+
+- Interrupt mode
+- Adaptive mode
+- TSO/LRO mode
+
+Does not support
+----------------
+
+This driver does yet support the following features.
+
+- NUMA support
+- RSS/multiple queues
+- VLAN filter
+
+Prerequisites
+-------------
+
+- This code is tested with vfio-pci driver installed with Ubuntu 18.04
+ which has kernel version 4.15.0-33-generic.
+
+- This code is tested with ESXi vSwitch version 6.0, release build
+ 3620759.
+
+- Driver requires MSI-X interrupt support, which is not supported by
+ uio_pci_generic driver, so vfio-pci needs to be used. On systems
+ without IOMMU vfio driver can still be used with recent kernels which
+ support no-iommu mode.
+
+System setup
+~~~~~~~~~~~~
+
+To use the native VPP vmxnet3 driver use the following Steps
+
+Load VFIO driver
+
+.. code-block:: console
+
+ $ sudo modprobe vfio-pci
+
+For systems without IOMMU only, enable unsafe NOIOMMU mode
+
+.. code-block:: console
+
+ $ echo Y | sudo tee /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+
+To bind interface to vfio-pci first install the :ref:`configutil`. This will download
+the dpdk_devbind.py script. It is located in */usr/vpp/vpp-config/scripts* with Centos
+and */usr/local/vpp/vpp-config/scripts* with Ubuntu.
+
+Bind the driver with the following commands:
+
+.. code-block:: console
+
+ $ sudo /usr/local/vpp/vpp-config/scripts/dpdk-devbind.py -s
+
+ Network devices using DPDK-compatible driver
+ ============================================
+ <none>
+
+ Network devices using kernel driver
+ ===================================
+ 0000:03:00.0 'VMXNET3 Ethernet Controller' if=ens160 drv=vmxnet3 unused=vfio-pci,uio_pci_generic
+ 0000:0b:00.0 'VMXNET3 Ethernet Controller' drv=vfio-pci unused=vmxnet3,uio_pci_generic
+ 0000:13:00.0 'VMXNET3 Ethernet Controller' drv=vfio-pci unused=vmxnet3,uio_pci_generic
+ .....
+
+ $ sudo /usr/local/vpp/vpp-config/scripts/dpdk-devbind.py --bind vfio-pci 0b:00.0
+
+
+Interface Creation
+~~~~~~~~~~~~~~~~~~
+
+Now create the interface dynamically with following:
+
+.. code-block:: console
+
+ $ sudo vppctl create interface vmxnet3 0000:0b:00.0
+ $ sudo set int state vmxnet3-0/b/0/0 up
+
+Interface Deletion
+~~~~~~~~~~~~~~~~~~
+
+If the interface needs to be deleted:
+
+.. code-block:: console
+
+ $ sudo delete interface vmxnet3 <if-name>
+
+Show vmxnet3
+~~~~~~~~~~~~
+
+Interface and ring information can be obtained with the command
+**show vmxnet3 [if-name] [desc]**
+
+For example:
+
+.. code-block:: console
+
+ $ sudo vppctl show vmxnet
+ Interface: vmxnet3-0/b/0/0 (ifindex 1)
+ Version: 1
+ PCI Address: 0000:0b:00.0
+ Mac Address: 00:50:56:88:63:be
+ hw if index: 1
+ Device instance: 0
+ Number of interrupts: 2
+ Queue 0 (RX)
+ RX completion next index 786
+ RX completion generation flag 0x80000000
+ ring 0 size 4096 fill 4094 consume 785 produce 784
+ ring 1 size 4096 fill 4096 consume 0 produce 0
+ Queue 0 (TX)
+ TX completion next index 216
+ TX completion generation flag 0x0
+ size 4096 consume 216 produce 245