diff options
| -rw-r--r-- | plugins/ioam-plugin/ioam/Readme.md | 465 | ||||
| -rw-r--r-- | plugins/ioam-plugin/ioam/dir.dox | 18 |
2 files changed, 483 insertions, 0 deletions
diff --git a/plugins/ioam-plugin/ioam/Readme.md b/plugins/ioam-plugin/ioam/Readme.md new file mode 100644 index 00000000000..469a15a142d --- /dev/null +++ b/plugins/ioam-plugin/ioam/Readme.md @@ -0,0 +1,465 @@ + +## VPP Inband OAM (iOAM) + +In-band OAM (iOAM) is an implementation study to record operational +information in the packet while the packet traverses a path between +two points in the network. + +Overview of iOAM can be found in [iOAM-Devnet] page. +The following IETF drafts detail the motivation and mechanism for +recording operational information: + - [iOAM-ietf-requirements] - Describes motivation and usecases for iOAM + - [iOAM-ietf-data] - Describes data records that can be collected using iOAM + - [iOAM-ietf-transport] - Lists out the transport protocols + and mechanism to carry iOAM data records + - [iOAM-ietf-proof-of-transit] - Describes the idea of Proof of Transit (POT) + and mechanisms to operationalize the idea + +## Terminology +In-band OAM is expected to be deployed in a specific domain rather +than on the overall Internet. The part of the network which employs in-band OAM +is referred to as **"in-band OAM-domain"**. + +In-band OAM data is added to a packet on entering the in-band OAM-domain +and is removed from the packet when exiting the domain. +Within the in-band OAM-domain, network nodes that the packet traverses +may update the in-band OAM data records. + +- The node which adds in-band OAM data to the packet is called the +**"in-band OAM encapsulating node"**. + +- The node which removes the in-band OAM data is referred to as the +**"in-band OAM decapsulating node"**. + +- Nodes within the domain which are aware of in-band OAM data and read +and/or write or process the in-band OAM data are called +**"in-band OAM transit nodes"**. + +## Features supported in the current release +VPP can function as in-band OAM encapsulating, transit and decapsulating node. +In this version of VPP in-band OAM data is transported as options in an +IPv6 hop-by-hop extension header. Hence in-band OAM can be enabled +for IPv6 traffic. + +The following iOAM features are supported: + +- **In-band OAM Tracing** : In-band OAM supports multiple data records to be +recorded in the packet as the packet traverses the network. +These data records offer insights into the operational behavior of the network. +The following information can be collected in the tracing +data from the nodes a packet traverses: + - Node ID + - Ingress interface ID + - Egress interface ID + - Timestamp + - Pre-configured application data + +- **In-band OAM Proof of Transit (POT)**: Proof of transit iOAM data is +added to every packet for verifying that a packet traverses a specific +set of nodes. +In-band OAM data is updated at every node that is enabled with iOAM +proof of transit and is used to verify whether a packet traversed +all the specified nodes. When the verifier receives each packet, +it can validate whether the packet traversed the specified nodes. + + +## Configuration +Configuring iOAM involves: +- Selecting the packets for which iOAM data must be inserted, updated or removed + - Selection of packets for iOAM data insertion on iOAM encapsulating node. + Selection of packets is done by 5-tuple based classification + - Selection of packets for updating iOAM data is implicitly done on the + presence of iOAM options in the packet + - Selection of packets for removing the iOAM data is done on 5-tuple + based classification +- The kind of data to be collected + - Tracing data + - Proof of transit +- Additional details for processing iOAM data to be collected + - For trace data - trace type, number of nodes to be recorded in the trace, + time stamp precision, etc. + - For POT data - configuration of POT profile required to process the POT data + +The CLI for configuring iOAM is explained here followed by detailed steps +and examples to deploy iOAM on VPP as an encapsulating, transit or +decapsulating iOAM node in the subsequent sub-sections. + +VPP iOAM configuration for enabling trace and POT is as follows: + + set ioam rewrite trace-type <0x1f|0x7|0x9|0x11|0x19> + trace-elts <number of trace elements> trace-tsp <0|1|2|3> + node-id <node ID in hex> app-data <application data in hex> [pot] + +A description of each of the options of the CLI follows: +- trace-type : An entry in the "Node data List" array of the trace option +can have different formats, following the needs of the a deployment. +For example: Some deployments might only be interested +in recording the node identifiers, whereas others might be interested +in recording node identifier and timestamp. +The following types are currently supported: + - 0x1f : Node data to include hop limit (8 bits), node ID (24 bits), + ingress and egress interface IDs (16 bits each), timestamp (32 bits), + application data (32 bits) + - 0x7 : Node data to include hop limit (8 bits), node ID (24 bits), + ingress and egress interface IDs (16 bits each) + - 0x9 : Node data to include hop limit (8 bits), node ID (24 bits), + timestamp (32 bits) + - 0x11: Node data to include hop limit (8 bits), node ID (24 bits), + application data (32 bits) + - 0x19: Node data to include hop limit (8 bits), node ID (24 bits), + timestamp (32 bits), application data (32 bits) +- trace-elts : Defines the length of the node data array in the trace option. +- trace-tsp : Defines the timestamp precision to use with the enumerated value + for precision as follows: + - 0 : 32bits timestamp in seconds + - 1 : 32bits timestamp in milliseconds + - 2 : 32bits timestamp in microseconds + - 3 : 32bits timestamp in nanoseconds +- node-id : Unique identifier for the node, included in the node ID + field of the node data in trace option. +- app-data : The value configured here is included as is in +application data field of node data in trace option. +- pot : Enables POT option to be included in the iOAM options. + +### Trace configuration + +#### On in-band OAM encapsulating node + - **Configure classifier and apply ACL** to select packets for + iOAM data insertion + - Example to enable iOAM data insertion for all the packets + towards IPv6 address db06::06: + + vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst + + vpp# classify session acl-hit-next node ip6-add-hop-by-hop + table-index 0 match l3 ip6 dst db06::06 + + vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0 + + - **Enable tracing** : Specify node ID, maximum number of nodes for which + trace data should be recorded, type of data to be included for recording, + optionally application data to be included + - Example to enable tracing with a maximum of 4 nodes recorded + and the data to be recorded to include - hop limit, node id, + ingress and egress interface IDs, timestamp (millisecond precision), + application data (0x1234): + + + vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 + node-id 0x1 app-data 0x1234 + + + +#### On in-band OAM transit node +- The transit node requires trace type, timestamp precision, node ID and +optionally application data to be configured, +to update its node data in the trace option. + +Example: + + vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 + node-id 0x2 app-data 0x1234 + +#### On the In-band OAM decapsulating node +- The decapsulating node similar to encapsulating node requires +**classification** of the packets to remove iOAM data from. + - Example to decapsulate iOAM data for packets towards + db06::06, configure classifier and enable it as an ACL as follows: + + + vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst + + vpp# classify session acl-hit-next node ip6-lookup table-index 0 + match l3 ip6 dst db06::06 opaque-index 100 + + vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0 + + +- Decapsulating node requires trace type, timestamp precision, +node ID and optionally application data to be configured, +to update its node data in the trace option before it is decapsulated. + +Example: + + vpp# set ioam rewrite trace-type 0x1f trace-elts 4 + trace-tsp 1 node-id 0x3 app-data 0x1234 + + +### Proof of Transit configuration + +For details on proof-of-transit, +see the IETF draft [iOAM-ietf-proof-of-transit]. +To enable Proof of Transit all the nodes that participate +and hence are verified for transit need a proof of transit profile. +A script to generate a proof of transit profile as per the mechanism +described in [iOAM-ietf-proof-of-transit] will be available at [iOAM-Devnet]. + +The Proof of transit mechanism implemented here is based on +Shamir's Secret Sharing algorithm. +The overall algorithm uses two polynomials +POLY-1 and POLY-2. The degree of polynomials depends on number of nodes +to be verified for transit. +POLY-1 is secret and constant. Each node gets a point on POLY-1 +at setup-time and keeps it secret. +POLY-2 is public, random and per packet. +Each node is assigned a point on POLY-1 and POLY-2 with the same x index. +Each node derives its point on POLY-2 each time a packet arrives at it. +A node then contributes its points on POLY-1 and POLY-2 to construct +POLY-3 (POLY-3 = POLY-1 + POLY-2) using lagrange extrapolation and +forwards it towards the verifier by updating POT data in the packet. +The verifier constructs POLY-3 from the accumulated value from all the nodes +and its own points on POLY-1 and POLY-2 and verifies whether +POLY-3 = POLY-1 + POLY-2. Only the verifier knows POLY-1. +The solution leverages finite field arithmetic in a field of size "prime number" +for reasons explained in description of Shamir's secret sharing algorithm. + +Here is an explanation of POT profile list and profile configuration CLI to +realize the above mechanism. +It is best to use the script provided at [iOAM-Devnet] to generate +this configuration. +- **Create POT profile** : set pot profile name <string> id [0-1] +[validator-key 0xu64] prime-number 0xu64 secret_share 0xu64 +lpc 0xu64 polynomial2 0xu64 bits-in-random [0-64] + - name : Profile list name. + - id : Profile id, it can be 0 or 1. + A maximum of two profiles can be configured per profile list. + - validator-key : Secret key configured only on the + verifier/decapsulating node used to compare and verify proof of transit. + - prime-number : Prime number for finite field arithmetic as required by the + proof of transit mechanism. + - secret_share : Unique point for each node on the secret polynomial POLY-1. + - lpc : Lagrange Polynomial Constant(LPC) calculated per node based on + its point (x value used for evaluating the points on the polynomial) + on the polynomial used in lagrange extrapolation + for reconstructing polynomial (POLY-3). + - polynomial2 : Is the pre-evaluated value of the point on + 2nd polynomial(POLY-2). This is unique for each node. + It is pre-evaluated for all the coefficients of POLY-2 except + for the constant part of the polynomial that changes per packet + and is received as part of the POT data in the packet. + - bits-in-random : To control the size of the random number to be + generated. This number has to match the other numbers generated and used + in the profile as per the algorithm. + +- **Set a configured profile as active/in-use** : +set pot profile-active name <string> ID [0-1] + - name : Name of the profile list to be used for computing + POT data per packet. + - ID : Identifier of the profile within the list to be used. + +#### On In-band OAM encapsulating node + - Configure the classifier and apply ACL to select packets for iOAM data insertion. + - Example to enable iOAM data insertion for all the packet towards + IPv6 address db06::06 - + + + vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst + + vpp# classify session acl-hit-next node + ip6-add-hop-by-hop table-index 0 match l3 ip6 dst db06::06 + + vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0 + + + - Configure the proof of transit profile list with profiles. +Each profile list referred to by a name can contain 2 profiles, +only one is in use for updating proof of transit data at any time. + - Example profile list example with a profile generated from the + script to verify transit through 3 nodes is: + + + vpp# set pot profile name example id 0 prime-number 0x7fff0000fa884685 + secret_share 0x6c22eff0f45ec56d lpc 0x7fff0000fa884682 + polynomial2 0xffb543d4a9c bits-in-random 63 + + - Enable one of the profiles from the configured profile list as active + so that is will be used for calculating proof of transit + +Example enable profile ID 0 from profile list example configured above: + + + vpp# set pot profile-active name example ID 0 + + + - Enable POT option to be inserted + + + vpp# set ioam rewrite pot + + +#### On in-band OAM transit node + - Configure the proof of transit profile list with profiles for transit node. +Example: + + + vpp# set pot profile name example id 0 prime-number 0x7fff0000fa884685 + secret_share 0x564cdbdec4eb625d lpc 0x1 + polynomial2 0x23f3a227186a bits-in-random 63 + +#### On in-band OAM decapsulating node / verifier +- The decapsulating node, similar to the encapsulating node requires +classification of the packets to remove iOAM data from. + - Example to decapsulate iOAM data for packets towards db06::06 + configure classifier and enable it as an ACL as follows: + + + vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst + + vpp# classify session acl-hit-next node ip6-lookup table-index 0 + match l3 ip6 dst db06::06 opaque-index 100 + + vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0 + +- To update and verify the proof of transit, POT profile list should be configured. + - Example POT profile list configured as follows: + + vpp# set pot profile name example id 0 validate-key 0x7fff0000fa88465d + prime-number 0x7fff0000fa884685 secret_share 0x7a08fbfc5b93116d lpc 0x3 + polynomial2 0x3ff738597ce bits-in-random 63 + +## Operational data + +Following CLIs are available to check iOAM operation: +- To check iOAM configuration that are effective use "show ioam summary" + +Example: + + vpp# show ioam summary + REWRITE FLOW CONFIGS - Not configured + HOP BY HOP OPTIONS - TRACE CONFIG - + Trace Type : 0x1f (31) + Trace timestamp precision : 1 (Milliseconds) + Num of trace nodes : 4 + Node-id : 0x2 (2) + App Data : 0x1234 (4660) + POT OPTION - 1 (Enabled) + Try 'show ioam pot and show pot profile' for more information + +- To find statistics about packets for which iOAM options were +added (encapsulating node) and removed (decapsulating node) execute +*show errors* + +Example on encapsulating node: + + + vpp# show error + Count Node Reason + 1208804706 ip6-inacl input ACL hits + 1208804706 ip6-add-hop-by-hop Pkts w/ added ip6 hop-by-hop options + +Example on decapsulating node: + + vpp# show error + Count Node Reason + 69508569 ip6-inacl input ACL hits + 69508569 ip6-pop-hop-by-hop Pkts w/ removed ip6 hop-by-hop options + +- To check the POT profiles use "show pot profile" + +Example: + + vpp# show pot profile + Profile list in use : example + POT Profile at index: 0 + ID : 0 + Validator : False (0) + Secret share : 0x564cdbdec4eb625d (6218586935324795485) + Prime number : 0x7fff0000fa884685 (9223090566081300101) + 2nd polynomial(eval) : 0x23f3a227186a (39529304496234) + LPC : 0x1 (1) + Bit mask : 0x7fffffffffffffff (9223372036854775807) + Profile index in use: 0 + Pkts passed : 0x36 (54) + +- To get statistics of POT for packets use "show ioam pot" + +Example at encapsulating or transit node: + + vpp# show ioam pot + Pkts with ip6 hop-by-hop POT options - 54 + Pkts with ip6 hop-by-hop POT options but no profile set - 0 + Pkts with POT in Policy - 0 + Pkts with POT out of Policy - 0 + + +Example at decapsulating/verification node: + + + vpp# show ioam pot + Pkts with ip6 hop-by-hop POT options - 54 + Pkts with ip6 hop-by-hop POT options but no profile set - 0 + Pkts with POT in Policy - 54 + Pkts with POT out of Policy - 0 + +- Tracing - enable trace of IPv6 packets to view the data inserted and +collected. + +Example when the nodes are receiving data over a DPDK interface: +Enable tracing using "trace add dpdk-input 20" and +execute "show trace" to view the iOAM data collected: + + + vpp# trace add dpdk-input 20 + + vpp# show trace + + ------------------- Start of thread 0 vpp_main ------------------- + + Packet 1 + + 00:00:19:294697: dpdk-input + GigabitEthernetb/0/0 rx queue 0 + buffer 0x10e6b: current data 0, length 214, free-list 0, totlen-nifb 0, trace 0x0 + PKT MBUF: port 0, nb_segs 1, pkt_len 214 + buf_len 2176, data_len 214, ol_flags 0x0, data_off 128, phys_addr 0xe9a35a00 + packet_type 0x0 + IP6: 00:50:56:9c:df:72 -> 00:50:56:9c:be:55 + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + tos 0x00, flow label 0x0, hop limit 63, payload length 160 + 00:00:19:294737: ethernet-input + IP6: 00:50:56:9c:df:72 -> 00:50:56:9c:be:55 + 00:00:19:294753: ip6-input + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + tos 0x00, flow label 0x0, hop limit 63, payload length 160 + 00:00:19:294757: ip6-lookup + fib 0 adj-idx 15 : indirect via db05::2 flow hash: 0x00000000 + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + tos 0x00, flow label 0x0, hop limit 63, payload length 160 + 00:00:19:294802: ip6-hop-by-hop + IP6_HOP_BY_HOP: next index 5 len 96 traced 96 Trace Type 0x1f , 1 elts left + [0] ttl 0x0 node ID 0x0 ingress 0x0 egress 0x0 ts 0x0 + app 0x0 + [1] ttl 0x3e node ID 0x3 ingress 0x1 egress 0x2 ts 0xb68c2213 + app 0x1234 + [2] ttl 0x3f node ID 0x2 ingress 0x1 egress 0x2 ts 0xb68c2204 + app 0x1234 + [3] ttl 0x40 node ID 0x1 ingress 0x5 egress 0x6 ts 0xb68c2200 + app 0x1234 + POT opt present + random = 0x577a916946071950, Cumulative = 0x10b46e78a35a392d, Index = 0x0 + 00:00:19:294810: ip6-rewrite + tx_sw_if_index 1 adj-idx 14 : GigabitEthernetb/0/0 + IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72 flow hash: 0x00000000 + IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72 + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + tos 0x00, flow label 0x0, hop limit 62, payload length 160 + 00:00:19:294814: GigabitEthernetb/0/0-output + GigabitEthernetb/0/0 + IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72 + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + tos 0x00, flow label 0x0, hop limit 62, payload length 160 + 00:00:19:294820: GigabitEthernetb/0/0-tx + GigabitEthernetb/0/0 tx queue 0 + buffer 0x10e6b: current data 0, length 214, free-list 0, totlen-nifb 0, trace 0x0 + IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72 + + IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6 + + tos 0x00, flow label 0x0, hop limit 62, payload length 160 + + +[iOAM-Devnet]: <https://github.com/ciscodevnet/iOAM> +[iOAM-ietf-requirements]:<https://tools.ietf.org/html/draft-brockners-inband-oam-requirements-01> +[iOAM-ietf-transport]:<https://tools.ietf.org/html/draft-brockners-inband-oam-transport-01> +[iOAM-ietf-data]:<https://tools.ietf.org/html/draft-brockners-inband-oam-data-01> +[iOAM-ietf-proof-of-transit]:<https://tools.ietf.org/html/draft-brockners-proof-of-transit-01> diff --git a/plugins/ioam-plugin/ioam/dir.dox b/plugins/ioam-plugin/ioam/dir.dox new file mode 100644 index 00000000000..f3389b52c3e --- /dev/null +++ b/plugins/ioam-plugin/ioam/dir.dox @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2016 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +/** + @dir + @brief Inband OAM (iOAM) implementation +*/ |