summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/gettingstarted/developers/buildwireshark.md81
-rw-r--r--docs/gettingstarted/developers/index.rst1
-rw-r--r--docs/gettingstarted/developers/vnet.md183
3 files changed, 263 insertions, 2 deletions
diff --git a/docs/gettingstarted/developers/buildwireshark.md b/docs/gettingstarted/developers/buildwireshark.md
new file mode 100644
index 00000000000..3da70e9e0ba
--- /dev/null
+++ b/docs/gettingstarted/developers/buildwireshark.md
@@ -0,0 +1,81 @@
+How to build a vpp dispatch trace aware Wireshark
+=================================================
+
+At some point, we will upstream our vpp pcap dispatch trace dissector.
+It's not finished - contributions welcome - and we have to work through
+whatever issues will be discovered during the upstreaming process.
+
+On the other hand, it's ready for some tire-kicking. Here's how to build
+wireshark.
+
+Download and patch wireshark source code
+-----------------------------------------
+
+The wireshark git repo is large, so it takes a while to clone.
+
+```
+ git clone https://code.wireshark.org/review/wireshark
+ cp .../extras/wireshark/packet-vpp.c wireshark/epan/dissectors
+ patch -p1 < .../extras/wireshark/diffs.txt
+```
+
+The small patch adds packet-vpp.c to the dissector list.
+
+Install prerequisite Debian packages
+------------------------------------
+
+Here is a list of prerequisite packages which must be present in order
+to compile wireshark, beyond what's typically installed on an Ubuntu
+18.04 system:
+
+```
+ libgcrypt11-dev flex bison qtbase5-dev qttools5-dev-tools qttools5-dev
+ qtmultimedia5-dev libqt5svg5-dev libpcap-dev qt5-default
+```
+
+Compile Wireshark
+-----------------
+
+Mercifully, Wireshark uses cmake, so it's relatively easy to build, at
+least on Ubuntu 18.04.
+
+
+```
+ $ cd wireshark
+ $ cmake -G Ninja
+ $ ninja -j 8
+ $ sudo ninja install
+```
+
+Make a pcap dispatch trace
+--------------------------
+
+Configure vpp to pass traffic in some fashion or other, and then:
+
+```
+ vpp# pcap dispatch trace on max 10000 file vppcapture buffer-trace dpdk-input 1000
+
+```
+
+or similar. Run traffic for long enough to capture some data. Save the
+dispatch trace capture like so:
+
+```
+ vpp# pcap dispatch trace off
+```
+
+Display in Wireshark
+--------------------
+
+Display /tmp/vppcapture in the vpp-enabled version of wireshark. With
+any luck, normal version of wireshark will refuse to process vpp
+dispatch trace pcap files because they won't understand the encap type.
+
+Set wireshark to filter on vpp.bufferindex to watch a single packet
+traverse the forwarding graph. Otherwise, you'll see a vector of packets
+in e.g. ip4-lookup, then a vector of packets in ip4-rewrite, etc.
+
+
+
+
+
diff --git a/docs/gettingstarted/developers/index.rst b/docs/gettingstarted/developers/index.rst
index 525f1b72305..199f8b23208 100644
--- a/docs/gettingstarted/developers/index.rst
+++ b/docs/gettingstarted/developers/index.rst
@@ -36,3 +36,4 @@ The Developers section covers the following areas:
buildsystem/index.rst
eventviewer
fib20/index.rst
+ buildwireshark
diff --git a/docs/gettingstarted/developers/vnet.md b/docs/gettingstarted/developers/vnet.md
index 60362f4b360..532eeeae67c 100644
--- a/docs/gettingstarted/developers/vnet.md
+++ b/docs/gettingstarted/developers/vnet.md
@@ -250,13 +250,15 @@ Packet tracer
-------------
Vlib includes a frame element \[packet\] trace facility, with a simple
-vlib cli interface. The cli is straightforward: "trace add
-input-node-name count".
+debug CLI interface. The cli is straightforward: "trace add
+input-node-name count" to start capturing packet traces.
To trace 100 packets on a typical x86\_64 system running the dpdk
plugin: "trace add dpdk-input 100". When using the packet generator:
"trace add pg-input 100"
+To display the packet trace: "show trace"
+
Each graph node has the opportunity to capture its own trace data. It is
almost always a good idea to do so. The trace capture APIs are simple.
@@ -286,3 +288,180 @@ Here's a simple example:
The trace framework hands the per-node format function the data it
captured as the packet whizzed by. The format function pretty-prints the
data as desired.
+
+Graph Dispatcher Pcap Tracing
+-----------------------------
+
+The vpp graph dispatcher knows how to capture vectors of packets in pcap
+format as they're dispatched. The pcap captures are as follows:
+
+```
+ VPP graph dispatch trace record description:
+
+ 0 1 2 3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Major Version | Minor Version | NStrings | ProtoHint |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Buffer index (big endian) |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ + VPP graph node name ... ... | NULL octet |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Buffer Metadata ... ... | NULL octet |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Buffer Opaque ... ... | NULL octet |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Buffer Opaque 2 ... ... | NULL octet |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | VPP ASCII packet trace (if NStrings > 4) | NULL octet |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Packet data (up to 16K) |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+```
+
+Graph dispatch records comprise a version stamp, an indication of how
+many NULL-terminated strings will follow the record header and preceed
+packet data, and a protocol hint.
+
+The buffer index is an opaque 32-bit cookie which allows consumers of
+these data to easily filter/track single packets as they traverse the
+forwarding graph. Multiple records per packet are normal, and to be
+expected.
+
+As of this writing: major version = 1, minor version = 0. Nstrings
+SHOULD be 4 or 5. Consumers SHOULD be wary values less than 4 or
+greater than 5. They MAY attempt to display the claimed number of
+strings, or they MAY treat the condition as an error.
+
+Here is the current set of protocol hints:
+
+```c
+ typedef enum
+ {
+ VLIB_NODE_PROTO_HINT_NONE = 0,
+ VLIB_NODE_PROTO_HINT_ETHERNET,
+ VLIB_NODE_PROTO_HINT_IP4,
+ VLIB_NODE_PROTO_HINT_IP6,
+ VLIB_NODE_PROTO_HINT_TCP,
+ VLIB_NODE_PROTO_HINT_UDP,
+ VLIB_NODE_N_PROTO_HINTS,
+ } vlib_node_proto_hint_t;
+```
+
+Example: VLIB_NODE_PROTO_HINT_IP6 means that the first octet of packet
+data SHOULD be 0x60, and should begin an ipv6 packet header.
+
+Downstream consumers of these data SHOULD pay attention to the
+protocol hint. They MUST tolerate inaccurate hints, which WILL occur
+from time to time.
+
+### Dispatch Pcap Trace Debug CLI
+
+To start a dispatch trace capture of up to 10,000 trace records:
+
+```
+ pcap dispatch trace on max 10000 file dispatch.pcap
+```
+
+To start a dispatch trace which will also include standard vpp packet
+tracing for packets which originate in dpdk-input:
+
+```
+ pcap dispatch trace on max 10000 file dispatch.pcap buffer-trace dpdk-input 1000
+```
+To save the pcap trace, e.g. in /tmp/dispatch.pcap:
+
+```
+ pcap dispatch trace off
+```
+
+### Wireshark dissection of dispatch pcap traces
+
+It almost goes without saying that we built a companion wireshark
+dissector to display these traces. As of this writing, we're in the
+process of trying to upstream the wireshark dissector.
+
+Until various games of "fetch me a rock" involved are finished, please
+see the "How to build a vpp dispatch trace aware Wireshark" page
+for build info, and/or take a look at .../extras/wireshark.
+
+Here is a sample packet dissection, with some fields omitted for
+clarity. The point is that the wireshark dissector accurately
+displays **all** of the vpp buffer metadata, and the name of the graph
+node in question.
+
+```
+ Frame 1: 2216 bytes on wire (17728 bits), 2216 bytes captured (17728 bits)
+ Encapsulation type: USER 13 (58)
+ [Protocols in frame: vpp:vpp-metadata:vpp-opaque:vpp-opaque2:eth:ethertype:ip:tcp:data]
+ VPP Dispatch Trace
+ BufferIndex: 0x00036663
+ NodeName: ethernet-input
+ VPP Buffer Metadata
+ Metadata: flags:
+ Metadata: current_data: 0, current_length: 102
+ Metadata: current_config_index: 0, flow_id: 0, next_buffer: 0
+ Metadata: error: 0, n_add_refs: 0, buffer_pool_index: 0
+ Metadata: trace_index: 0, recycle_count: 0, len_not_first_buf: 0
+ Metadata: free_list_index: 0
+ Metadata:
+ VPP Buffer Opaque
+ Opaque: raw: 00000007 ffffffff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+ Opaque: sw_if_index[VLIB_RX]: 7, sw_if_index[VLIB_TX]: -1
+ Opaque: L2 offset 0, L3 offset 0, L4 offset 0, feature arc index 0
+ Opaque: ip.adj_index[VLIB_RX]: 0, ip.adj_index[VLIB_TX]: 0
+ Opaque: ip.flow_hash: 0x0, ip.save_protocol: 0x0, ip.fib_index: 0
+ Opaque: ip.save_rewrite_length: 0, ip.rpf_id: 0
+ Opaque: ip.icmp.type: 0 ip.icmp.code: 0, ip.icmp.data: 0x0
+ Opaque: ip.reass.next_index: 0, ip.reass.estimated_mtu: 0
+ Opaque: ip.reass.fragment_first: 0 ip.reass.fragment_last: 0
+ Opaque: ip.reass.range_first: 0 ip.reass.range_last: 0
+ Opaque: ip.reass.next_range_bi: 0x0, ip.reass.ip6_frag_hdr_offset: 0
+ Opaque: mpls.ttl: 0, mpls.exp: 0, mpls.first: 0, mpls.save_rewrite_length: 0, mpls.bier.n_bytes: 0
+ Opaque: l2.feature_bitmap: 00000000, l2.bd_index: 0, l2.l2_len: 0, l2.shg: 0, l2.l2fib_sn: 0, l2.bd_age: 0
+ Opaque: l2.feature_bitmap_input: none configured, L2.feature_bitmap_output: none configured
+ Opaque: l2t.next_index: 0, l2t.session_index: 0
+ Opaque: l2_classify.table_index: 0, l2_classify.opaque_index: 0, l2_classify.hash: 0x0
+ Opaque: policer.index: 0
+ Opaque: ipsec.flags: 0x0, ipsec.sad_index: 0
+ Opaque: map.mtu: 0
+ Opaque: map_t.v6.saddr: 0x0, map_t.v6.daddr: 0x0, map_t.v6.frag_offset: 0, map_t.v6.l4_offset: 0
+ Opaque: map_t.v6.l4_protocol: 0, map_t.checksum_offset: 0, map_t.mtu: 0
+ Opaque: ip_frag.mtu: 0, ip_frag.next_index: 0, ip_frag.flags: 0x0
+ Opaque: cop.current_config_index: 0
+ Opaque: lisp.overlay_afi: 0
+ Opaque: tcp.connection_index: 0, tcp.seq_number: 0, tcp.seq_end: 0, tcp.ack_number: 0, tcp.hdr_offset: 0, tcp.data_offset: 0
+ Opaque: tcp.data_len: 0, tcp.flags: 0x0
+ Opaque: sctp.connection_index: 0, sctp.sid: 0, sctp.ssn: 0, sctp.tsn: 0, sctp.hdr_offset: 0
+ Opaque: sctp.data_offset: 0, sctp.data_len: 0, sctp.subconn_idx: 0, sctp.flags: 0x0
+ Opaque: snat.flags: 0x0
+ Opaque:
+ VPP Buffer Opaque2
+ Opaque2: raw: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+ Opaque2: qos.bits: 0, qos.source: 0
+ Opaque2: loop_counter: 0
+ Opaque2: gbp.flags: 0, gbp.src_epg: 0
+ Opaque2: pg_replay_timestamp: 0
+ Opaque2:
+ Ethernet II, Src: 06:d6:01:41:3b:92 (06:d6:01:41:3b:92), Dst: IntelCor_3d:f6 Transmission Control Protocol, Src Port: 22432, Dst Port: 54084, Seq: 1, Ack: 1, Len: 36
+ Source Port: 22432
+ Destination Port: 54084
+ TCP payload (36 bytes)
+ Data (36 bytes)
+
+ 0000 cf aa 8b f5 53 14 d4 c7 29 75 3e 56 63 93 9d 11 ....S...)u>Vc...
+ 0010 e5 f2 92 27 86 56 4c 21 ce c5 23 46 d7 eb ec 0d ...'.VL!..#F....
+ 0020 a8 98 36 5a ..6Z
+ Data: cfaa8bf55314d4c729753e5663939d11e5f2922786564c21…
+ [Length: 36]
+```
+
+It's a matter of a couple of mouse-clicks in Wireshark to filter the
+trace to a specific buffer index. With that specific kind of filtration,
+one can watch a packet walk through the forwarding graph; noting any/all
+metadata changes, header checksum changes, and so forth.
+
+This should be of significant value when developing new vpp graph
+nodes. If new code mispositions b->current_data, it will be completely
+obvious from looking at the dispatch trace in wireshark.
+