summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--dpdk/Makefile2
-rw-r--r--dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch135
-rw-r--r--dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch22
-rw-r--r--dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch87
-rw-r--r--dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch13
-rw-r--r--dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch57
-rw-r--r--dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch385
-rw-r--r--dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch194
-rw-r--r--dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch809
-rwxr-xr-xsrc/plugins/dpdk/device/init.c5
10 files changed, 1707 insertions, 2 deletions
diff --git a/dpdk/Makefile b/dpdk/Makefile
index fc93f9c6be0..c46ef0f125e 100644
--- a/dpdk/Makefile
+++ b/dpdk/Makefile
@@ -25,7 +25,7 @@ DPDK_MLX5_PMD ?= n
B := $(DPDK_BUILD_DIR)
I := $(DPDK_INSTALL_DIR)
DPDK_VERSION ?= 17.02
-PKG_SUFFIX ?= vpp2
+PKG_SUFFIX ?= vpp3
DPDK_BASE_URL ?= http://fast.dpdk.org/rel
DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
diff --git a/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch b/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch
new file mode 100644
index 00000000000..3ebf5e8aa91
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch
@@ -0,0 +1,135 @@
+diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
+index 879da5e..2b4345a 100644
+--- a/drivers/net/mlx5/mlx5.h
++++ b/drivers/net/mlx5/mlx5.h
+@@ -197,6 +197,8 @@ struct mlx5_secondary_data {
+ int mlx5_is_secondary(void);
+ int priv_get_ifname(const struct priv *, char (*)[IF_NAMESIZE]);
+ int priv_ifreq(const struct priv *, int req, struct ifreq *);
++int priv_is_ib_cntr(const char *);
++int priv_get_cntr_sysfs(struct priv *, const char *, uint64_t *);
+ int priv_get_num_vfs(struct priv *, uint16_t *);
+ int priv_get_mtu(struct priv *, uint16_t *);
+ int priv_set_flags(struct priv *, unsigned int, unsigned int);
+diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
+index 2145965..6b64f44 100644
+--- a/drivers/net/mlx5/mlx5_ethdev.c
++++ b/drivers/net/mlx5/mlx5_ethdev.c
+@@ -234,6 +234,23 @@ struct priv *
+ }
+
+ /**
++ * Check if the counter is located on ib counters file.
++ *
++ * @param[in] cntr
++ * Counter name.
++ *
++ * @return
++ * 1 if counter is located on ib counters file , 0 otherwise.
++ */
++int
++priv_is_ib_cntr(const char *cntr)
++{
++ if (!strcmp(cntr, "out_of_buffer"))
++ return 1;
++ return 0;
++}
++
++/**
+ * Read from sysfs entry.
+ *
+ * @param[in] priv
+@@ -260,10 +277,15 @@ struct priv *
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+- MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+- ifname, entry);
+-
+- file = fopen(path, "rb");
++ if (priv_is_ib_cntr(entry)) {
++ MKSTR(path, "%s/ports/1/hw_counters/%s",
++ priv->ctx->device->ibdev_path, entry);
++ file = fopen(path, "rb");
++ } else {
++ MKSTR(path, "%s/device/net/%s/%s",
++ priv->ctx->device->ibdev_path, ifname, entry);
++ file = fopen(path, "rb");
++ }
+ if (file == NULL)
+ return -1;
+ ret = fread(buf, 1, size, file);
+@@ -469,6 +491,30 @@ struct priv *
+ }
+
+ /**
++ * Read device counter from sysfs.
++ *
++ * @param priv
++ * Pointer to private structure.
++ * @param name
++ * Counter name.
++ * @param[out] cntr
++ * Counter output buffer.
++ *
++ * @return
++ * 0 on success, -1 on failure and errno is set.
++ */
++int
++priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
++{
++ unsigned long ulong_ctr;
++
++ if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
++ return -1;
++ *cntr = ulong_ctr;
++ return 0;
++}
++
++/**
+ * Set device MTU.
+ *
+ * @param priv
+diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
+index 20c957e..a48ebea 100644
+--- a/drivers/net/mlx5/mlx5_stats.c
++++ b/drivers/net/mlx5/mlx5_stats.c
+@@ -125,6 +125,10 @@ struct mlx5_counter_ctrl {
+ .dpdk_name = "tx_errors_phy",
+ .ctr_name = "tx_errors_phy",
+ },
++ {
++ .dpdk_name = "rx_out_of_buffer",
++ .ctr_name = "out_of_buffer",
++ },
+ };
+
+ static const unsigned int xstats_n = RTE_DIM(mlx5_counters_init);
+@@ -159,9 +163,15 @@ struct mlx5_counter_ctrl {
+ WARN("unable to read statistic values from device");
+ return -1;
+ }
+- for (i = 0; i != xstats_n; ++i)
+- stats[i] = (uint64_t)
+- et_stats->data[xstats_ctrl->dev_table_idx[i]];
++ for (i = 0; i != xstats_n; ++i) {
++ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
++ priv_get_cntr_sysfs(priv,
++ mlx5_counters_init[i].ctr_name,
++ &stats[i]);
++ else
++ stats[i] = (uint64_t)
++ et_stats->data[xstats_ctrl->dev_table_idx[i]];
++ }
+ return 0;
+ }
+
+@@ -233,6 +243,8 @@ struct mlx5_counter_ctrl {
+ }
+ }
+ for (j = 0; j != xstats_n; ++j) {
++ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
++ continue;
+ if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) {
+ WARN("counter \"%s\" is not recognized",
+ mlx5_counters_init[j].dpdk_name);
diff --git a/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch b/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch
new file mode 100644
index 00000000000..aa03639bed6
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch
@@ -0,0 +1,22 @@
+diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
+index 20c957e..0c80e4f 100644
+--- a/drivers/net/mlx5/mlx5_stats.c
++++ b/drivers/net/mlx5/mlx5_stats.c
+@@ -177,17 +177,12 @@ struct mlx5_counter_ctrl {
+ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
+ unsigned int i;
+ unsigned int j;
+- char ifname[IF_NAMESIZE];
+ struct ifreq ifr;
+ struct ethtool_drvinfo drvinfo;
+ struct ethtool_gstrings *strings = NULL;
+ unsigned int dev_stats_n;
+ unsigned int str_sz;
+
+- if (priv_get_ifname(priv, &ifname)) {
+- WARN("unable to get interface name");
+- return;
+- }
+ /* How many statistics are available. */
+ drvinfo.cmd = ETHTOOL_GDRVINFO;
+ ifr.ifr_data = (caddr_t)&drvinfo;
diff --git a/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch b/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch
new file mode 100644
index 00000000000..05c2e8df82c
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch
@@ -0,0 +1,87 @@
+diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
+index 0c80e4f..60ffbaa 100644
+--- a/drivers/net/mlx5/mlx5_stats.c
++++ b/drivers/net/mlx5/mlx5_stats.c
+@@ -166,6 +166,29 @@ struct mlx5_counter_ctrl {
+ }
+
+ /**
++ * Query the number of statistics provided by ETHTOOL.
++ *
++ * @param priv
++ * Pointer to private structure.
++ *
++ * @return
++ * Number of statistics on success, -1 on error.
++ */
++static int
++priv_ethtool_get_stats_n(struct priv *priv) {
++ struct ethtool_drvinfo drvinfo;
++ struct ifreq ifr;
++
++ drvinfo.cmd = ETHTOOL_GDRVINFO;
++ ifr.ifr_data = (caddr_t)&drvinfo;
++ if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) {
++ WARN("unable to query number of statistics");
++ return -1;
++ }
++ return drvinfo.n_stats;
++}
++
++/**
+ * Init the structures to read device counters.
+ *
+ * @param priv
+@@ -178,19 +201,11 @@ struct mlx5_counter_ctrl {
+ unsigned int i;
+ unsigned int j;
+ struct ifreq ifr;
+- struct ethtool_drvinfo drvinfo;
+ struct ethtool_gstrings *strings = NULL;
+ unsigned int dev_stats_n;
+ unsigned int str_sz;
+
+- /* How many statistics are available. */
+- drvinfo.cmd = ETHTOOL_GDRVINFO;
+- ifr.ifr_data = (caddr_t)&drvinfo;
+- if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) {
+- WARN("unable to get driver info");
+- return;
+- }
+- dev_stats_n = drvinfo.n_stats;
++ dev_stats_n = priv_ethtool_get_stats_n(priv);
+ if (dev_stats_n < 1) {
+ WARN("no extended statistics available");
+ return;
+@@ -410,7 +425,15 @@ struct mlx5_counter_ctrl {
+ int ret = xstats_n;
+
+ if (n >= xstats_n && stats) {
++ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
++ int stats_n;
++
+ priv_lock(priv);
++ stats_n = priv_ethtool_get_stats_n(priv);
++ if (stats_n < 0)
++ return -1;
++ if (xstats_ctrl->stats_n != stats_n)
++ priv_xstats_init(priv);
+ ret = priv_xstats_get(priv, stats);
+ priv_unlock(priv);
+ }
+@@ -427,8 +450,15 @@ struct mlx5_counter_ctrl {
+ mlx5_xstats_reset(struct rte_eth_dev *dev)
+ {
+ struct priv *priv = mlx5_get_priv(dev);
++ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
++ int stats_n;
+
+ priv_lock(priv);
++ stats_n = priv_ethtool_get_stats_n(priv);
++ if (stats_n < 0)
++ return;
++ if (xstats_ctrl->stats_n != stats_n)
++ priv_xstats_init(priv);
+ priv_xstats_reset(priv);
+ priv_unlock(priv);
+ }
diff --git a/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch b/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch
new file mode 100644
index 00000000000..8c066ad3850
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch
@@ -0,0 +1,13 @@
+diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c
+index 1953293..703f48c 100644
+--- a/drivers/net/mlx5/mlx5_stats.c
++++ b/drivers/net/mlx5/mlx5_stats.c
+@@ -253,7 +253,7 @@ struct mlx5_counter_ctrl {
+ }
+ }
+ for (j = 0; j != xstats_n; ++j) {
+- if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name))
++ if (priv_is_ib_cntr(mlx5_counters_init[j].ctr_name))
+ continue;
+ if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) {
+ WARN("counter \"%s\" is not recognized",
diff --git a/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch b/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch
new file mode 100644
index 00000000000..af928bb2abb
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch
@@ -0,0 +1,57 @@
+From 0866d640e42d6c54b2b3f15ebde9930e756ba4d5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?N=C3=A9lio=20Laranjeiro?= <nelio.laranjeiro@6wind.com>
+Date: Wed, 22 Feb 2017 10:57:52 +0100
+Subject: [PATCH] net/mlx5: fix startup when flow cannot be applied
+
+When flows cannot be re-applied due to configuration modifications, the
+start function should rollback the configuration done.
+
+Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions")
+Cc: stable@dpdk.org
+
+Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
+---
+ drivers/net/mlx5/mlx5_trigger.c | 21 ++++++++++++++++-----
+ 1 file changed, 16 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
+index 30addd2..0acbf28 100644
+--- a/drivers/net/mlx5/mlx5_trigger.c
++++ b/drivers/net/mlx5/mlx5_trigger.c
+@@ -82,17 +82,28 @@ mlx5_dev_start(struct rte_eth_dev *dev)
+ ERROR("%p: an error occurred while configuring hash RX queues:"
+ " %s",
+ (void *)priv, strerror(err));
+- /* Rollback. */
+- priv_special_flow_disable_all(priv);
+- priv_mac_addrs_disable(priv);
+- priv_destroy_hash_rxqs(priv);
++ goto error;
+ }
+ if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE)
+ priv_fdir_enable(priv);
+- priv_dev_interrupt_handler_install(priv, dev);
+ err = priv_flow_start(priv);
++ if (err) {
++ priv->started = 0;
++ ERROR("%p: an error occurred while configuring flows:"
++ " %s",
++ (void *)priv, strerror(err));
++ goto error;
++ }
++ priv_dev_interrupt_handler_install(priv, dev);
+ priv_xstats_init(priv);
+ priv_unlock(priv);
++ return 0;
++error:
++ /* Rollback. */
++ priv_special_flow_disable_all(priv);
++ priv_mac_addrs_disable(priv);
++ priv_destroy_hash_rxqs(priv);
++ priv_flow_stop(priv);
+ return -err;
+ }
+
+--
+2.7.4
+
diff --git a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch
new file mode 100644
index 00000000000..929a61325aa
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch
@@ -0,0 +1,385 @@
+From e25bad4a287924d26627ffe307f8a12824b87054 Mon Sep 17 00:00:00 2001
+From: Shahaf Shuler <shahafs@mellanox.com>
+Date: Thu, 2 Mar 2017 11:01:31 +0200
+Subject: [PATCH] net/mlx5: add hardware TSO support
+
+Implement support for hardware TSO.
+
+Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
+Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
+---
+ doc/guides/nics/features/mlx5.ini | 1 +
+ doc/guides/nics/mlx5.rst | 12 ++++
+ drivers/net/mlx5/mlx5.c | 18 ++++++
+ drivers/net/mlx5/mlx5.h | 2 +
+ drivers/net/mlx5/mlx5_defs.h | 3 +
+ drivers/net/mlx5/mlx5_ethdev.c | 2 +
+ drivers/net/mlx5/mlx5_rxtx.c | 123 +++++++++++++++++++++++++++++++++-----
+ drivers/net/mlx5/mlx5_rxtx.h | 2 +
+ drivers/net/mlx5/mlx5_txq.c | 13 ++++
+ 9 files changed, 160 insertions(+), 16 deletions(-)
+
+diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
+index f20d214..8df25ce 100644
+--- a/doc/guides/nics/features/mlx5.ini
++++ b/doc/guides/nics/features/mlx5.ini
+@@ -11,6 +11,7 @@ Queue start/stop = Y
+ MTU update = Y
+ Jumbo frame = Y
+ Scattered Rx = Y
++TSO = Y
+ Promiscuous mode = Y
+ Allmulticast mode = Y
+ Unicast MAC filter = Y
+diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
+index 5f6e594..9b0ba29 100644
+--- a/doc/guides/nics/mlx5.rst
++++ b/doc/guides/nics/mlx5.rst
+@@ -90,6 +90,7 @@ Features
+ - Secondary process TX is supported.
+ - KVM and VMware ESX SR-IOV modes are supported.
+ - RSS hash result is supported.
++- Hardware TSO.
+
+ Limitations
+ -----------
+@@ -186,9 +187,20 @@ Run-time configuration
+ save PCI bandwidth and improve performance at the cost of a slightly
+ higher CPU usage.
+
++ This option cannot be used in conjunction with ``tso`` below. When ``tso``
++ is set, ``txq_mpw_en`` is disabled.
++
+ It is currently only supported on the ConnectX-4 Lx and ConnectX-5
+ families of adapters. Enabled by default.
+
++- ``tso`` parameter [int]
++
++ A nonzero value enables hardware TSO.
++ When hardware TSO is enabled, packets marked with TCP segmentation
++ offload will be divided into segments by the hardware.
++
++ Disabled by default.
++
+ Prerequisites
+ -------------
+
+diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
+index d4bd469..03ed3b3 100644
+--- a/drivers/net/mlx5/mlx5.c
++++ b/drivers/net/mlx5/mlx5.c
+@@ -84,6 +84,9 @@
+ /* Device parameter to enable multi-packet send WQEs. */
+ #define MLX5_TXQ_MPW_EN "txq_mpw_en"
+
++/* Device parameter to enable hardware TSO offload. */
++#define MLX5_TSO "tso"
++
+ /**
+ * Retrieve integer value from environment variable.
+ *
+@@ -290,6 +293,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
+ priv->txqs_inline = tmp;
+ } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
+ priv->mps &= !!tmp; /* Enable MPW only if HW supports */
++ } else if (strcmp(MLX5_TSO, key) == 0) {
++ priv->tso = !!tmp;
+ } else {
+ WARN("%s: unknown parameter", key);
+ return -EINVAL;
+@@ -316,6 +321,7 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs)
+ MLX5_TXQ_INLINE,
+ MLX5_TXQS_MIN_INLINE,
+ MLX5_TXQ_MPW_EN,
++ MLX5_TSO,
+ NULL,
+ };
+ struct rte_kvargs *kvlist;
+@@ -479,6 +485,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ IBV_EXP_DEVICE_ATTR_RX_HASH |
+ IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS |
+ IBV_EXP_DEVICE_ATTR_RX_PAD_END_ALIGN |
++ IBV_EXP_DEVICE_ATTR_TSO_CAPS |
+ 0;
+
+ DEBUG("using port %u (%08" PRIx32 ")", port, test);
+@@ -580,11 +587,22 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+
+ priv_get_num_vfs(priv, &num_vfs);
+ priv->sriov = (num_vfs || sriov);
++ priv->tso = ((priv->tso) &&
++ (exp_device_attr.tso_caps.max_tso > 0) &&
++ (exp_device_attr.tso_caps.supported_qpts &
++ (1 << IBV_QPT_RAW_ETH)));
++ if (priv->tso)
++ priv->max_tso_payload_sz =
++ exp_device_attr.tso_caps.max_tso;
+ if (priv->mps && !mps) {
+ ERROR("multi-packet send not supported on this device"
+ " (" MLX5_TXQ_MPW_EN ")");
+ err = ENOTSUP;
+ goto port_error;
++ } else if (priv->mps && priv->tso) {
++ WARN("multi-packet send not supported in conjunction "
++ "with TSO. MPS disabled");
++ priv->mps = 0;
+ }
+ /* Allocate and register default RSS hash keys. */
+ priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n,
+diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
+index 4c4b9d4..93f129b 100644
+--- a/drivers/net/mlx5/mlx5.h
++++ b/drivers/net/mlx5/mlx5.h
+@@ -126,6 +126,8 @@ struct priv {
+ unsigned int mps:1; /* Whether multi-packet send is supported. */
+ unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
+ unsigned int pending_alarm:1; /* An alarm is pending. */
++ unsigned int tso:1; /* Whether TSO is supported. */
++ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
+ unsigned int txq_inline; /* Maximum packet size for inlining. */
+ unsigned int txqs_inline; /* Queue number threshold for inlining. */
+ /* RX/TX queues. */
+diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
+index e91d245..eecb908 100644
+--- a/drivers/net/mlx5/mlx5_defs.h
++++ b/drivers/net/mlx5/mlx5_defs.h
+@@ -79,4 +79,7 @@
+ /* Maximum number of extended statistics counters. */
+ #define MLX5_MAX_XSTATS 32
+
++/* Maximum Packet headers size (L2+L3+L4) for TSO. */
++#define MLX5_MAX_TSO_HEADER 128
++
+ #endif /* RTE_PMD_MLX5_DEFS_H_ */
+diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
+index 5677f03..5542193 100644
+--- a/drivers/net/mlx5/mlx5_ethdev.c
++++ b/drivers/net/mlx5/mlx5_ethdev.c
+@@ -693,6 +693,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+ (DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM);
++ if (priv->tso)
++ info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
+ if (priv_get_ifname(priv, &ifname) == 0)
+ info->if_index = if_nametoindex(ifname);
+ /* FIXME: RETA update/query API expects the callee to know the size of
+diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
+index 4d5455b..98889f6 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.c
++++ b/drivers/net/mlx5/mlx5_rxtx.c
+@@ -365,6 +365,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ const unsigned int elts_n = 1 << txq->elts_n;
+ unsigned int i = 0;
+ unsigned int j = 0;
++ unsigned int k = 0;
+ unsigned int max;
+ uint16_t max_wqe;
+ unsigned int comp;
+@@ -392,8 +393,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ uintptr_t addr;
+ uint64_t naddr;
+ uint16_t pkt_inline_sz = MLX5_WQE_DWORD_SIZE + 2;
++ uint16_t tso_header_sz = 0;
+ uint16_t ehdr;
+ uint8_t cs_flags = 0;
++ uint64_t tso = 0;
+ #ifdef MLX5_PMD_SOFT_COUNTERS
+ uint32_t total_length = 0;
+ #endif
+@@ -465,14 +468,74 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ length -= pkt_inline_sz;
+ addr += pkt_inline_sz;
+ }
++ if (txq->tso_en) {
++ tso = buf->ol_flags & PKT_TX_TCP_SEG;
++ if (tso) {
++ uintptr_t end = (uintptr_t)
++ (((uintptr_t)txq->wqes) +
++ (1 << txq->wqe_n) *
++ MLX5_WQE_SIZE);
++ unsigned int copy_b;
++ uint8_t vlan_sz = (buf->ol_flags &
++ PKT_TX_VLAN_PKT) ? 4 : 0;
++
++ tso_header_sz = buf->l2_len + vlan_sz +
++ buf->l3_len + buf->l4_len;
++
++ if (unlikely(tso_header_sz >
++ MLX5_MAX_TSO_HEADER))
++ break;
++ copy_b = tso_header_sz - pkt_inline_sz;
++ /* First seg must contain all headers. */
++ assert(copy_b <= length);
++ raw += MLX5_WQE_DWORD_SIZE;
++ if (copy_b &&
++ ((end - (uintptr_t)raw) > copy_b)) {
++ uint16_t n = (MLX5_WQE_DS(copy_b) -
++ 1 + 3) / 4;
++
++ if (unlikely(max_wqe < n))
++ break;
++ max_wqe -= n;
++ rte_memcpy((void *)raw,
++ (void *)addr, copy_b);
++ addr += copy_b;
++ length -= copy_b;
++ pkt_inline_sz += copy_b;
++ /*
++ * Another DWORD will be added
++ * in the inline part.
++ */
++ raw += MLX5_WQE_DS(copy_b) *
++ MLX5_WQE_DWORD_SIZE -
++ MLX5_WQE_DWORD_SIZE;
++ } else {
++ /* NOP WQE. */
++ wqe->ctrl = (rte_v128u32_t){
++ htonl(txq->wqe_ci << 8),
++ htonl(txq->qp_num_8s | 1),
++ 0,
++ 0,
++ };
++ ds = 1;
++ total_length = 0;
++ pkts--;
++ pkts_n++;
++ elts_head = (elts_head - 1) &
++ (elts_n - 1);
++ k++;
++ goto next_wqe;
++ }
++ }
++ }
+ /* Inline if enough room. */
+- if (txq->max_inline) {
++ if (txq->inline_en || tso) {
+ uintptr_t end = (uintptr_t)
+ (((uintptr_t)txq->wqes) +
+ (1 << txq->wqe_n) * MLX5_WQE_SIZE);
+ unsigned int max_inline = txq->max_inline *
+ RTE_CACHE_LINE_SIZE -
+- MLX5_WQE_DWORD_SIZE;
++ (pkt_inline_sz - 2);
+ uintptr_t addr_end = (addr + max_inline) &
+ ~(RTE_CACHE_LINE_SIZE - 1);
+ unsigned int copy_b = (addr_end > addr) ?
+@@ -491,6 +554,18 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ if (unlikely(max_wqe < n))
+ break;
+ max_wqe -= n;
++ if (tso) {
++ uint32_t inl =
++ htonl(copy_b | MLX5_INLINE_SEG);
++
++ pkt_inline_sz =
++ MLX5_WQE_DS(tso_header_sz) *
++ MLX5_WQE_DWORD_SIZE;
++ rte_memcpy((void *)raw,
++ (void *)&inl, sizeof(inl));
++ raw += sizeof(inl);
++ pkt_inline_sz += sizeof(inl);
++ }
+ rte_memcpy((void *)raw, (void *)addr, copy_b);
+ addr += copy_b;
+ length -= copy_b;
+@@ -591,18 +666,34 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ next_pkt:
+ ++i;
+ /* Initialize known and common part of the WQE structure. */
+- wqe->ctrl = (rte_v128u32_t){
+- htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND),
+- htonl(txq->qp_num_8s | ds),
+- 0,
+- 0,
+- };
+- wqe->eseg = (rte_v128u32_t){
+- 0,
+- cs_flags,
+- 0,
+- (ehdr << 16) | htons(pkt_inline_sz),
+- };
++ if (tso) {
++ wqe->ctrl = (rte_v128u32_t){
++ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_TSO),
++ htonl(txq->qp_num_8s | ds),
++ 0,
++ 0,
++ };
++ wqe->eseg = (rte_v128u32_t){
++ 0,
++ cs_flags | (htons(buf->tso_segsz) << 16),
++ 0,
++ (ehdr << 16) | htons(tso_header_sz),
++ };
++ } else {
++ wqe->ctrl = (rte_v128u32_t){
++ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND),
++ htonl(txq->qp_num_8s | ds),
++ 0,
++ 0,
++ };
++ wqe->eseg = (rte_v128u32_t){
++ 0,
++ cs_flags,
++ 0,
++ (ehdr << 16) | htons(pkt_inline_sz),
++ };
++ }
++next_wqe:
+ txq->wqe_ci += (ds + 3) / 4;
+ #ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Increment sent bytes counter. */
+@@ -610,10 +701,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ #endif
+ } while (pkts_n);
+ /* Take a shortcut if nothing must be sent. */
+- if (unlikely(i == 0))
++ if (unlikely((i + k) == 0))
+ return 0;
+ /* Check whether completion threshold has been reached. */
+- comp = txq->elts_comp + i + j;
++ comp = txq->elts_comp + i + j + k;
+ if (comp >= MLX5_TX_COMP_THRESH) {
+ volatile struct mlx5_wqe_ctrl *w =
+ (volatile struct mlx5_wqe_ctrl *)wqe;
+diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
+index 41a34d7..6b328cf 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.h
++++ b/drivers/net/mlx5/mlx5_rxtx.h
+@@ -254,6 +254,8 @@ struct txq {
+ uint16_t cqe_n:4; /* Number of CQ elements (in log2). */
+ uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */
+ uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
++ uint16_t inline_en:1; /* When set inline is enabled. */
++ uint16_t tso_en:1; /* When set hardware TSO is enabled. */
+ uint32_t qp_num_8s; /* QP number shifted by 8. */
+ volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
+ volatile void *wqes; /* Work queue (use volatile to write into). */
+diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
+index 949035b..995b763 100644
+--- a/drivers/net/mlx5/mlx5_txq.c
++++ b/drivers/net/mlx5/mlx5_txq.c
+@@ -342,6 +342,19 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ RTE_CACHE_LINE_SIZE);
+ attr.init.cap.max_inline_data =
+ tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
++ tmpl.txq.inline_en = 1;
++ }
++ if (priv->tso) {
++ uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER +
++ (RTE_CACHE_LINE_SIZE - 1)) /
++ RTE_CACHE_LINE_SIZE);
++
++ attr.init.max_tso_header =
++ max_tso_inline * RTE_CACHE_LINE_SIZE;
++ attr.init.comp_mask |= IBV_EXP_QP_INIT_ATTR_MAX_TSO_HEADER;
++ tmpl.txq.max_inline = RTE_MAX(tmpl.txq.max_inline,
++ max_tso_inline);
++ tmpl.txq.tso_en = 1;
+ }
+ tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
+ if (tmpl.qp == NULL) {
+--
+2.7.4
+
diff --git a/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch b/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch
new file mode 100644
index 00000000000..bbcce486410
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch
@@ -0,0 +1,194 @@
+From f0dda2ab16635894b1e3836d0b960b9270a3b491 Mon Sep 17 00:00:00 2001
+From: Shahaf Shuler <shahafs@mellanox.com>
+Date: Thu, 2 Mar 2017 11:05:44 +0200
+Subject: [PATCH] net/mlx5: add hardware checksum offload for tunnel packets
+
+Prior to this commit Tx checksum offload was supported only for the
+inner headers.
+This commit adds support for the hardware to compute the checksum for the
+outer headers as well.
+
+The support is for tunneling protocols GRE and VXLAN.
+
+Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
+Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
+---
+ doc/guides/nics/features/mlx5.ini | 2 ++
+ doc/guides/nics/mlx5.rst | 3 ++-
+ drivers/net/mlx5/mlx5.c | 7 +++++++
+ drivers/net/mlx5/mlx5.h | 2 ++
+ drivers/net/mlx5/mlx5_ethdev.c | 2 ++
+ drivers/net/mlx5/mlx5_prm.h | 6 ++++++
+ drivers/net/mlx5/mlx5_rxtx.c | 14 +++++++++++++-
+ drivers/net/mlx5/mlx5_rxtx.h | 2 ++
+ drivers/net/mlx5/mlx5_txq.c | 2 ++
+ 9 files changed, 38 insertions(+), 2 deletions(-)
+
+diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini
+index 8df25ce..1814f82 100644
+--- a/doc/guides/nics/features/mlx5.ini
++++ b/doc/guides/nics/features/mlx5.ini
+@@ -27,6 +27,8 @@ CRC offload = Y
+ VLAN offload = Y
+ L3 checksum offload = Y
+ L4 checksum offload = Y
++Inner L3 checksum = Y
++Inner L4 checksum = Y
+ Packet type parsing = Y
+ Basic stats = Y
+ Stats per queue = Y
+diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
+index 9b0ba29..41f3a47 100644
+--- a/doc/guides/nics/mlx5.rst
++++ b/doc/guides/nics/mlx5.rst
+@@ -91,13 +91,14 @@ Features
+ - KVM and VMware ESX SR-IOV modes are supported.
+ - RSS hash result is supported.
+ - Hardware TSO.
++- Hardware checksum TX offload for VXLAN and GRE.
+
+ Limitations
+ -----------
+
+ - Inner RSS for VXLAN frames is not supported yet.
+ - Port statistics through software counters only.
+-- Hardware checksum offloads for VXLAN inner header are not supported yet.
++- Hardware checksum RX offloads for VXLAN inner header are not supported yet.
+ - Secondary process RX is not supported.
+
+ Configuration
+diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
+index 03ed3b3..6f42948 100644
+--- a/drivers/net/mlx5/mlx5.c
++++ b/drivers/net/mlx5/mlx5.c
+@@ -375,6 +375,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ struct ibv_device_attr device_attr;
+ unsigned int sriov;
+ unsigned int mps;
++ unsigned int tunnel_en;
+ int idx;
+ int i;
+
+@@ -429,12 +430,17 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ * as all ConnectX-5 devices.
+ */
+ switch (pci_dev->id.device_id) {
++ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
++ tunnel_en = 1;
++ mps = 0;
++ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ mps = 1;
++ tunnel_en = 1;
+ break;
+ default:
+ mps = 0;
+@@ -539,6 +545,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ priv->mtu = ETHER_MTU;
+ priv->mps = mps; /* Enable MPW by default if supported. */
+ priv->cqe_comp = 1; /* Enable compression by default. */
++ priv->tunnel_en = tunnel_en;
+ err = mlx5_args(priv, pci_dev->device.devargs);
+ if (err) {
+ ERROR("failed to process device arguments: %s",
+diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
+index 93f129b..870e01f 100644
+--- a/drivers/net/mlx5/mlx5.h
++++ b/drivers/net/mlx5/mlx5.h
+@@ -127,6 +127,8 @@ struct priv {
+ unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
+ unsigned int pending_alarm:1; /* An alarm is pending. */
+ unsigned int tso:1; /* Whether TSO is supported. */
++ unsigned int tunnel_en:1;
++ /* Whether Tx offloads for tunneled packets are supported. */
+ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
+ unsigned int txq_inline; /* Maximum packet size for inlining. */
+ unsigned int txqs_inline; /* Queue number threshold for inlining. */
+diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
+index 5542193..8be9e77 100644
+--- a/drivers/net/mlx5/mlx5_ethdev.c
++++ b/drivers/net/mlx5/mlx5_ethdev.c
+@@ -695,6 +695,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+ DEV_TX_OFFLOAD_TCP_CKSUM);
+ if (priv->tso)
+ info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
++ if (priv->tunnel_en)
++ info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+ if (priv_get_ifname(priv, &ifname) == 0)
+ info->if_index = if_nametoindex(ifname);
+ /* FIXME: RETA update/query API expects the callee to know the size of
+diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
+index 3318668..0a77f5b 100644
+--- a/drivers/net/mlx5/mlx5_prm.h
++++ b/drivers/net/mlx5/mlx5_prm.h
+@@ -120,6 +120,12 @@
+ /* Tunnel packet bit in the CQE. */
+ #define MLX5_CQE_RX_TUNNEL_PACKET (1u << 0)
+
++/* Inner L3 checksum offload (Tunneled packets only). */
++#define MLX5_ETH_WQE_L3_INNER_CSUM (1u << 4)
++
++/* Inner L4 checksum offload (Tunneled packets only). */
++#define MLX5_ETH_WQE_L4_INNER_CSUM (1u << 5)
++
+ /* INVALID is used by packets matching no flow rules. */
+ #define MLX5_FLOW_MARK_INVALID 0
+
+diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
+index 98889f6..c2eb891 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.c
++++ b/drivers/net/mlx5/mlx5_rxtx.c
+@@ -443,7 +443,19 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+ /* Should we enable HW CKSUM offload */
+ if (buf->ol_flags &
+ (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM)) {
+- cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM;
++ const uint64_t is_tunneled = buf->ol_flags &
++ (PKT_TX_TUNNEL_GRE |
++ PKT_TX_TUNNEL_VXLAN);
++
++ if (is_tunneled && txq->tunnel_en) {
++ cs_flags = MLX5_ETH_WQE_L3_INNER_CSUM |
++ MLX5_ETH_WQE_L4_INNER_CSUM;
++ if (buf->ol_flags & PKT_TX_OUTER_IP_CKSUM)
++ cs_flags |= MLX5_ETH_WQE_L3_CSUM;
++ } else {
++ cs_flags = MLX5_ETH_WQE_L3_CSUM |
++ MLX5_ETH_WQE_L4_CSUM;
++ }
+ }
+ raw = ((uint8_t *)(uintptr_t)wqe) + 2 * MLX5_WQE_DWORD_SIZE;
+ /* Replace the Ethernet type by the VLAN if necessary. */
+diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
+index 6b328cf..9669564 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.h
++++ b/drivers/net/mlx5/mlx5_rxtx.h
+@@ -256,6 +256,8 @@ struct txq {
+ uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
+ uint16_t inline_en:1; /* When set inline is enabled. */
+ uint16_t tso_en:1; /* When set hardware TSO is enabled. */
++ uint16_t tunnel_en:1;
++ /* When set TX offload for tunneled packets are supported. */
+ uint32_t qp_num_8s; /* QP number shifted by 8. */
+ volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
+ volatile void *wqes; /* Work queue (use volatile to write into). */
+diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
+index 995b763..9d0c00f 100644
+--- a/drivers/net/mlx5/mlx5_txq.c
++++ b/drivers/net/mlx5/mlx5_txq.c
+@@ -356,6 +356,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ max_tso_inline);
+ tmpl.txq.tso_en = 1;
+ }
++ if (priv->tunnel_en)
++ tmpl.txq.tunnel_en = 1;
+ tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+--
+2.7.4
+
diff --git a/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch b/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch
new file mode 100644
index 00000000000..6ff076c71f5
--- /dev/null
+++ b/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch
@@ -0,0 +1,809 @@
+From 7ca5c8de65acabe4cb60960adcfa9247efdd2a5c Mon Sep 17 00:00:00 2001
+From: Yongseok Koh <yskoh@mellanox.com>
+Date: Wed, 15 Mar 2017 16:55:44 -0700
+Subject: [PATCH] net/mlx5: add enhanced multi-packet send for ConnectX-5
+
+ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
+descriptor can carry multiple packets either by including pointers of
+packets or by inlining packets. Inlining packet data can be helpful to
+better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
+mode - mixing inlined packets and pointers in a descriptor. This feature is
+enabled by default if supported by HW.
+
+Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
+---
+ doc/guides/nics/mlx5.rst | 31 +++-
+ drivers/net/mlx5/mlx5.c | 37 +++-
+ drivers/net/mlx5/mlx5.h | 4 +-
+ drivers/net/mlx5/mlx5_defs.h | 7 +
+ drivers/net/mlx5/mlx5_ethdev.c | 6 +-
+ drivers/net/mlx5/mlx5_prm.h | 20 ++
+ drivers/net/mlx5/mlx5_rxtx.c | 410 +++++++++++++++++++++++++++++++++++++++++
+ drivers/net/mlx5/mlx5_rxtx.h | 7 +-
+ drivers/net/mlx5/mlx5_txq.c | 29 ++-
+ 9 files changed, 534 insertions(+), 17 deletions(-)
+
+diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
+index 41f3a47..0783aeb 100644
+--- a/doc/guides/nics/mlx5.rst
++++ b/doc/guides/nics/mlx5.rst
+@@ -183,10 +183,17 @@ Run-time configuration
+
+ - ``txq_mpw_en`` parameter [int]
+
+- A nonzero value enables multi-packet send. This feature allows the TX
+- burst function to pack up to five packets in two descriptors in order to
+- save PCI bandwidth and improve performance at the cost of a slightly
+- higher CPU usage.
++ A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
++ enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
++ TX burst function to pack up multiple packets in a single descriptor
++ session in order to save PCI bandwidth and improve performance at the
++ cost of a slightly higher CPU usage. When ``txq_inline`` is set along
++ with ``txq_mpw_en``, TX burst function tries to copy entire packet data
++ on to TX descriptor instead of including pointer of packet only if there
++ is enough room remained in the descriptor. ``txq_inline`` sets
++ per-descriptor space for either pointers or inlined packets. In addition,
++ Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
++ in the same descriptor.
+
+ This option cannot be used in conjunction with ``tso`` below. When ``tso``
+ is set, ``txq_mpw_en`` is disabled.
+@@ -194,6 +201,22 @@ Run-time configuration
+ It is currently only supported on the ConnectX-4 Lx and ConnectX-5
+ families of adapters. Enabled by default.
+
++- ``txq_mpw_hdr_dseg_en`` parameter [int]
++
++ A nonzero value enables including two pointers in the first block of TX
++ descriptor. This can be used to lessen CPU load for memory copy.
++
++ Effective only when Enhanced MPS is supported. Disabled by default.
++
++- ``txq_max_inline_len`` parameter [int]
++
++ Maximum size of packet to be inlined. This limits the size of packet to
++ be inlined. If the size of a packet is larger than configured value, the
++ packet isn't inlined even though there's enough space remained in the
++ descriptor. Instead, the packet is included with pointer.
++
++ Effective only when Enhanced MPS is supported. The default value is 256.
++
+ - ``tso`` parameter [int]
+
+ A nonzero value enables hardware TSO.
+diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
+index ebc7984..bc6a34f 100644
+--- a/drivers/net/mlx5/mlx5.c
++++ b/drivers/net/mlx5/mlx5.c
+@@ -84,6 +84,12 @@
+ /* Device parameter to enable multi-packet send WQEs. */
+ #define MLX5_TXQ_MPW_EN "txq_mpw_en"
+
++/* Device parameter to include 2 dsegs in the title WQEBB. */
++#define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
++
++/* Device parameter to limit the size of inlining packet. */
++#define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
++
+ /* Device parameter to enable hardware TSO offload. */
+ #define MLX5_TSO "tso"
+
+@@ -294,7 +300,11 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
+ } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
+ priv->txqs_inline = tmp;
+ } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
+- priv->mps &= !!tmp; /* Enable MPW only if HW supports */
++ priv->mps = !!tmp ? priv->mps : MLX5_MPW_DISABLED;
++ } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
++ priv->mpw_hdr_dseg = !!tmp;
++ } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
++ priv->inline_max_packet_sz = tmp;
+ } else if (strcmp(MLX5_TSO, key) == 0) {
+ priv->tso = !!tmp;
+ } else {
+@@ -323,6 +333,8 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs)
+ MLX5_TXQ_INLINE,
+ MLX5_TXQS_MIN_INLINE,
+ MLX5_TXQ_MPW_EN,
++ MLX5_TXQ_MPW_HDR_DSEG_EN,
++ MLX5_TXQ_MAX_INLINE_LEN,
+ MLX5_TSO,
+ NULL,
+ };
+@@ -434,24 +446,27 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ switch (pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
+ tunnel_en = 1;
+- mps = 0;
++ mps = MLX5_MPW_DISABLED;
+ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
++ mps = MLX5_MPW;
++ break;
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+- mps = 1;
+ tunnel_en = 1;
++ mps = MLX5_MPW_ENHANCED;
+ break;
+ default:
+- mps = 0;
++ mps = MLX5_MPW_DISABLED;
+ }
+ INFO("PCI information matches, using device \"%s\""
+- " (SR-IOV: %s, MPS: %s)",
++ " (SR-IOV: %s, %sMPS: %s)",
+ list[i]->name,
+ sriov ? "true" : "false",
+- mps ? "true" : "false");
++ mps == MLX5_MPW_ENHANCED ? "Enhanced " : "",
++ mps != MLX5_MPW_DISABLED ? "true" : "false");
+ attr_ctx = ibv_open_device(list[i]);
+ err = errno;
+ break;
+@@ -546,6 +561,13 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+ priv->mps = mps; /* Enable MPW by default if supported. */
++ /* Set default values for Enhanced MPW, a.k.a MPWv2. */
++ if (mps == MLX5_MPW_ENHANCED) {
++ priv->mpw_hdr_dseg = 0;
++ priv->txqs_inline = MLX5_EMPW_MIN_TXQS;
++ priv->inline_max_packet_sz = MLX5_EMPW_MAX_INLINE_LEN;
++ priv->txq_inline = MLX5_WQE_SIZE_MAX - MLX5_WQE_SIZE;
++ }
+ priv->cqe_comp = 1; /* Enable compression by default. */
+ priv->tunnel_en = tunnel_en;
+ err = mlx5_args(priv, pci_dev->device.devargs);
+@@ -613,6 +635,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+ "with TSO. MPS disabled");
+ priv->mps = 0;
+ }
++ INFO("%sMPS is %s",
++ priv->mps == MLX5_MPW_ENHANCED ? "Enhanced " : "",
++ priv->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+ /* Allocate and register default RSS hash keys. */
+ priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n,
+ sizeof((*priv->rss_conf)[0]), 0);
+diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
+index 870e01f..d26d465 100644
+--- a/drivers/net/mlx5/mlx5.h
++++ b/drivers/net/mlx5/mlx5.h
+@@ -123,7 +123,8 @@ struct priv {
+ unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
+ unsigned int hw_padding:1; /* End alignment padding is supported. */
+ unsigned int sriov:1; /* This is a VF or PF with VF devices. */
+- unsigned int mps:1; /* Whether multi-packet send is supported. */
++ unsigned int mps:2; /* Multi-packet send mode (0: disabled). */
++ unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
+ unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
+ unsigned int pending_alarm:1; /* An alarm is pending. */
+ unsigned int tso:1; /* Whether TSO is supported. */
+@@ -132,6 +133,7 @@ struct priv {
+ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */
+ unsigned int txq_inline; /* Maximum packet size for inlining. */
+ unsigned int txqs_inline; /* Queue number threshold for inlining. */
++ unsigned int inline_max_packet_sz; /* Max packet size for inlining. */
+ /* RX/TX queues. */
+ unsigned int rxqs_n; /* RX queues array size. */
+ unsigned int txqs_n; /* TX queues array size. */
+diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
+index eecb908..201bb33 100644
+--- a/drivers/net/mlx5/mlx5_defs.h
++++ b/drivers/net/mlx5/mlx5_defs.h
+@@ -55,6 +55,13 @@
+ #define MLX5_TX_COMP_THRESH 32
+
+ /*
++ * Request TX completion every time the total number of WQEBBs used for inlining
++ * packets exceeds the size of WQ divided by this divisor. Better to be power of
++ * two for performance.
++ */
++#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
++
++/*
+ * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
+ * from which buffers are to be transmitted will have to be mapped by this
+ * driver to their own Memory Region (MR). This is a slow operation.
+diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
+index 5deb6e8..dd5fe5c 100644
+--- a/drivers/net/mlx5/mlx5_ethdev.c
++++ b/drivers/net/mlx5/mlx5_ethdev.c
+@@ -1590,7 +1590,11 @@ priv_select_tx_function(struct priv *priv)
+ {
+ priv->dev->tx_pkt_burst = mlx5_tx_burst;
+ /* Select appropriate TX function. */
+- if (priv->mps && priv->txq_inline) {
++ if (priv->mps == MLX5_MPW_ENHANCED) {
++ priv->dev->tx_pkt_burst =
++ mlx5_tx_burst_empw;
++ DEBUG("selected Enhanced MPW TX function");
++ } else if (priv->mps && priv->txq_inline) {
+ priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
+ DEBUG("selected MPW inline TX function");
+ } else if (priv->mps) {
+diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
+index 0a77f5b..155bdba 100644
+--- a/drivers/net/mlx5/mlx5_prm.h
++++ b/drivers/net/mlx5/mlx5_prm.h
+@@ -73,6 +73,9 @@
+ /* WQE size */
+ #define MLX5_WQE_SIZE (4 * MLX5_WQE_DWORD_SIZE)
+
++/* Max size of a WQE session. */
++#define MLX5_WQE_SIZE_MAX 960U
++
+ /* Compute the number of DS. */
+ #define MLX5_WQE_DS(n) \
+ (((n) + MLX5_WQE_DWORD_SIZE - 1) / MLX5_WQE_DWORD_SIZE)
+@@ -80,10 +83,19 @@
+ /* Room for inline data in multi-packet WQE. */
+ #define MLX5_MWQE64_INL_DATA 28
+
++/* Default minimum number of Tx queues for inlining packets. */
++#define MLX5_EMPW_MIN_TXQS 8
++
++/* Default max packet length to be inlined. */
++#define MLX5_EMPW_MAX_INLINE_LEN (4U * MLX5_WQE_SIZE)
++
+ #ifndef HAVE_VERBS_MLX5_OPCODE_TSO
+ #define MLX5_OPCODE_TSO MLX5_OPCODE_LSO_MPW /* Compat with OFED 3.3. */
+ #endif
+
++#define MLX5_OPC_MOD_ENHANCED_MPSW 0
++#define MLX5_OPCODE_ENHANCED_MPSW 0x29
++
+ /* CQE value to inform that VLAN is stripped. */
+ #define MLX5_CQE_VLAN_STRIPPED (1u << 0)
+
+@@ -176,10 +188,18 @@ struct mlx5_wqe64 {
+ uint8_t raw[32];
+ } __rte_aligned(MLX5_WQE_SIZE);
+
++/* MPW mode. */
++enum mlx5_mpw_mode {
++ MLX5_MPW_DISABLED,
++ MLX5_MPW,
++ MLX5_MPW_ENHANCED, /* Enhanced Multi-Packet Send WQE, a.k.a MPWv2. */
++};
++
+ /* MPW session status. */
+ enum mlx5_mpw_state {
+ MLX5_MPW_STATE_OPENED,
+ MLX5_MPW_INL_STATE_OPENED,
++ MLX5_MPW_ENHANCED_STATE_OPENED,
+ MLX5_MPW_STATE_CLOSED,
+ };
+
+diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
+index 9fc433e..a1dd84a 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.c
++++ b/drivers/net/mlx5/mlx5_rxtx.c
+@@ -195,6 +195,62 @@ tx_mlx5_wqe(struct txq *txq, uint16_t ci)
+ }
+
+ /**
++ * Return the size of tailroom of WQ.
++ *
++ * @param txq
++ * Pointer to TX queue structure.
++ * @param addr
++ * Pointer to tail of WQ.
++ *
++ * @return
++ * Size of tailroom.
++ */
++static inline size_t
++tx_mlx5_wq_tailroom(struct txq *txq, void *addr)
++{
++ size_t tailroom;
++ tailroom = (uintptr_t)(txq->wqes) +
++ (1 << txq->wqe_n) * MLX5_WQE_SIZE -
++ (uintptr_t)addr;
++ return tailroom;
++}
++
++/**
++ * Copy data to tailroom of circular queue.
++ *
++ * @param dst
++ * Pointer to destination.
++ * @param src
++ * Pointer to source.
++ * @param n
++ * Number of bytes to copy.
++ * @param base
++ * Pointer to head of queue.
++ * @param tailroom
++ * Size of tailroom from dst.
++ *
++ * @return
++ * Pointer after copied data.
++ */
++static inline void *
++mlx5_copy_to_wq(void *dst, const void *src, size_t n,
++ void *base, size_t tailroom)
++{
++ void *ret;
++
++ if (n > tailroom) {
++ rte_memcpy(dst, src, tailroom);
++ rte_memcpy(base, (void *)((uintptr_t)src + tailroom),
++ n - tailroom);
++ ret = (uint8_t *)base + n - tailroom;
++ } else {
++ rte_memcpy(dst, src, n);
++ ret = (n == tailroom) ? base : (uint8_t *)dst + n;
++ }
++ return ret;
++}
++
++/**
+ * Manage TX completions.
+ *
+ * When sending a burst, mlx5_tx_burst() posts several WRs.
+@@ -1269,6 +1325,360 @@ mlx5_tx_burst_mpw_inline(void *dpdk_txq, struct rte_mbuf **pkts,
+ }
+
+ /**
++ * Open an Enhanced MPW session.
++ *
++ * @param txq
++ * Pointer to TX queue structure.
++ * @param mpw
++ * Pointer to MPW session structure.
++ * @param length
++ * Packet length.
++ */
++static inline void
++mlx5_empw_new(struct txq *txq, struct mlx5_mpw *mpw, int padding)
++{
++ uint16_t idx = txq->wqe_ci & ((1 << txq->wqe_n) - 1);
++
++ mpw->state = MLX5_MPW_ENHANCED_STATE_OPENED;
++ mpw->pkts_n = 0;
++ mpw->total_len = sizeof(struct mlx5_wqe);
++ mpw->wqe = (volatile struct mlx5_wqe *)tx_mlx5_wqe(txq, idx);
++ mpw->wqe->ctrl[0] = htonl((MLX5_OPC_MOD_ENHANCED_MPSW << 24) |
++ (txq->wqe_ci << 8) |
++ MLX5_OPCODE_ENHANCED_MPSW);
++ mpw->wqe->ctrl[2] = 0;
++ mpw->wqe->ctrl[3] = 0;
++ memset((void *)(uintptr_t)&mpw->wqe->eseg, 0, MLX5_WQE_DWORD_SIZE);
++ if (unlikely(padding)) {
++ uintptr_t addr = (uintptr_t)(mpw->wqe + 1);
++
++ /* Pad the first 2 DWORDs with zero-length inline header. */
++ *(volatile uint32_t *)addr = htonl(MLX5_INLINE_SEG);
++ *(volatile uint32_t *)(addr + MLX5_WQE_DWORD_SIZE) =
++ htonl(MLX5_INLINE_SEG);
++ mpw->total_len += 2 * MLX5_WQE_DWORD_SIZE;
++ /* Start from the next WQEBB. */
++ mpw->data.raw = (volatile void *)(tx_mlx5_wqe(txq, idx + 1));
++ } else {
++ mpw->data.raw = (volatile void *)(mpw->wqe + 1);
++ }
++}
++
++/**
++ * Close an Enhanced MPW session.
++ *
++ * @param txq
++ * Pointer to TX queue structure.
++ * @param mpw
++ * Pointer to MPW session structure.
++ *
++ * @return
++ * Number of consumed WQEs.
++ */
++static inline uint16_t
++mlx5_empw_close(struct txq *txq, struct mlx5_mpw *mpw)
++{
++ uint16_t ret;
++
++ /* Store size in multiple of 16 bytes. Control and Ethernet segments
++ * count as 2.
++ */
++ mpw->wqe->ctrl[1] = htonl(txq->qp_num_8s | MLX5_WQE_DS(mpw->total_len));
++ mpw->state = MLX5_MPW_STATE_CLOSED;
++ ret = (mpw->total_len + (MLX5_WQE_SIZE - 1)) / MLX5_WQE_SIZE;
++ txq->wqe_ci += ret;
++ return ret;
++}
++
++/**
++ * DPDK callback for TX with Enhanced MPW support.
++ *
++ * @param dpdk_txq
++ * Generic pointer to TX queue structure.
++ * @param[in] pkts
++ * Packets to transmit.
++ * @param pkts_n
++ * Number of packets in array.
++ *
++ * @return
++ * Number of packets successfully transmitted (<= pkts_n).
++ */
++uint16_t
++mlx5_tx_burst_empw(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
++{
++ struct txq *txq = (struct txq *)dpdk_txq;
++ uint16_t elts_head = txq->elts_head;
++ const unsigned int elts_n = 1 << txq->elts_n;
++ unsigned int i = 0;
++ unsigned int j = 0;
++ unsigned int max_elts;
++ uint16_t max_wqe;
++ unsigned int max_inline = txq->max_inline * RTE_CACHE_LINE_SIZE;
++ unsigned int mpw_room = 0;
++ unsigned int inl_pad = 0;
++ uint32_t inl_hdr;
++ struct mlx5_mpw mpw = {
++ .state = MLX5_MPW_STATE_CLOSED,
++ };
++
++ if (unlikely(!pkts_n))
++ return 0;
++ /* Start processing. */
++ txq_complete(txq);
++ max_elts = (elts_n - (elts_head - txq->elts_tail));
++ if (max_elts > elts_n)
++ max_elts -= elts_n;
++ /* A CQE slot must always be available. */
++ assert((1u << txq->cqe_n) - (txq->cq_pi - txq->cq_ci));
++ max_wqe = (1u << txq->wqe_n) - (txq->wqe_ci - txq->wqe_pi);
++ if (unlikely(!max_wqe))
++ return 0;
++ do {
++ struct rte_mbuf *buf = *(pkts++);
++ unsigned int elts_head_next;
++ uintptr_t addr;
++ uint64_t naddr;
++ unsigned int n;
++ unsigned int do_inline = 0; /* Whether inline is possible. */
++ uint32_t length;
++ unsigned int segs_n = buf->nb_segs;
++ uint32_t cs_flags = 0;
++
++ /*
++ * Make sure there is enough room to store this packet and
++ * that one ring entry remains unused.
++ */
++ assert(segs_n);
++ if (max_elts - j < segs_n + 1)
++ break;
++ /* Do not bother with large packets MPW cannot handle. */
++ if (segs_n > MLX5_MPW_DSEG_MAX)
++ break;
++ /* Should we enable HW CKSUM offload. */
++ if (buf->ol_flags &
++ (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM))
++ cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM;
++ /* Retrieve packet information. */
++ length = PKT_LEN(buf);
++ /* Start new session if:
++ * - multi-segment packet
++ * - no space left even for a dseg
++ * - next packet can be inlined with a new WQE
++ * - cs_flag differs
++ * It can't be MLX5_MPW_STATE_OPENED as always have a single
++ * segmented packet.
++ */
++ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED) {
++ if ((segs_n != 1) ||
++ (inl_pad + sizeof(struct mlx5_wqe_data_seg) >
++ mpw_room) ||
++ (length <= txq->inline_max_packet_sz &&
++ inl_pad + sizeof(inl_hdr) + length >
++ mpw_room) ||
++ (mpw.wqe->eseg.cs_flags != cs_flags))
++ max_wqe -= mlx5_empw_close(txq, &mpw);
++ }
++ if (unlikely(mpw.state == MLX5_MPW_STATE_CLOSED)) {
++ if (unlikely(segs_n != 1)) {
++ /* Fall back to legacy MPW.
++ * A MPW session consumes 2 WQEs at most to
++ * include MLX5_MPW_DSEG_MAX pointers.
++ */
++ if (unlikely(max_wqe < 2))
++ break;
++ mlx5_mpw_new(txq, &mpw, length);
++ } else {
++ /* In Enhanced MPW, inline as much as the budget
++ * is allowed. The remaining space is to be
++ * filled with dsegs. If the title WQEBB isn't
++ * padded, it will have 2 dsegs there.
++ */
++ mpw_room = RTE_MIN(MLX5_WQE_SIZE_MAX,
++ (max_inline ? max_inline :
++ pkts_n * MLX5_WQE_DWORD_SIZE) +
++ MLX5_WQE_SIZE);
++ if (unlikely(max_wqe * MLX5_WQE_SIZE <
++ mpw_room))
++ break;
++ /* Don't pad the title WQEBB to not waste WQ. */
++ mlx5_empw_new(txq, &mpw, 0);
++ mpw_room -= mpw.total_len;
++ inl_pad = 0;
++ do_inline =
++ length <= txq->inline_max_packet_sz &&
++ sizeof(inl_hdr) + length <= mpw_room &&
++ !txq->mpw_hdr_dseg;
++ }
++ mpw.wqe->eseg.cs_flags = cs_flags;
++ } else {
++ /* Evaluate whether the next packet can be inlined.
++ * Inlininig is possible when:
++ * - length is less than configured value
++ * - length fits for remaining space
++ * - not required to fill the title WQEBB with dsegs
++ */
++ do_inline =
++ length <= txq->inline_max_packet_sz &&
++ inl_pad + sizeof(inl_hdr) + length <=
++ mpw_room &&
++ (!txq->mpw_hdr_dseg ||
++ mpw.total_len >= MLX5_WQE_SIZE);
++ }
++ /* Multi-segment packets must be alone in their MPW. */
++ assert((segs_n == 1) || (mpw.pkts_n == 0));
++ if (unlikely(mpw.state == MLX5_MPW_STATE_OPENED)) {
++#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
++ length = 0;
++#endif
++ do {
++ volatile struct mlx5_wqe_data_seg *dseg;
++
++ elts_head_next =
++ (elts_head + 1) & (elts_n - 1);
++ assert(buf);
++ (*txq->elts)[elts_head] = buf;
++ dseg = mpw.data.dseg[mpw.pkts_n];
++ addr = rte_pktmbuf_mtod(buf, uintptr_t);
++ *dseg = (struct mlx5_wqe_data_seg){
++ .byte_count = htonl(DATA_LEN(buf)),
++ .lkey = txq_mp2mr(txq, txq_mb2mp(buf)),
++ .addr = htonll(addr),
++ };
++ elts_head = elts_head_next;
++#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
++ length += DATA_LEN(buf);
++#endif
++ buf = buf->next;
++ ++j;
++ ++mpw.pkts_n;
++ } while (--segs_n);
++ /* A multi-segmented packet takes one MPW session.
++ * TODO: Pack more multi-segmented packets if possible.
++ */
++ mlx5_mpw_close(txq, &mpw);
++ if (mpw.pkts_n < 3)
++ max_wqe--;
++ else
++ max_wqe -= 2;
++ } else if (do_inline) {
++ /* Inline packet into WQE. */
++ unsigned int max;
++
++ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED);
++ assert(length == DATA_LEN(buf));
++ inl_hdr = htonl(length | MLX5_INLINE_SEG);
++ addr = rte_pktmbuf_mtod(buf, uintptr_t);
++ mpw.data.raw = (volatile void *)
++ ((uintptr_t)mpw.data.raw + inl_pad);
++ max = tx_mlx5_wq_tailroom(txq,
++ (void *)(uintptr_t)mpw.data.raw);
++ /* Copy inline header. */
++ mpw.data.raw = (volatile void *)
++ mlx5_copy_to_wq(
++ (void *)(uintptr_t)mpw.data.raw,
++ &inl_hdr,
++ sizeof(inl_hdr),
++ (void *)(uintptr_t)txq->wqes,
++ max);
++ max = tx_mlx5_wq_tailroom(txq,
++ (void *)(uintptr_t)mpw.data.raw);
++ /* Copy packet data. */
++ mpw.data.raw = (volatile void *)
++ mlx5_copy_to_wq(
++ (void *)(uintptr_t)mpw.data.raw,
++ (void *)addr,
++ length,
++ (void *)(uintptr_t)txq->wqes,
++ max);
++ ++mpw.pkts_n;
++ mpw.total_len += (inl_pad + sizeof(inl_hdr) + length);
++ /* No need to get completion as the entire packet is
++ * copied to WQ. Free the buf right away.
++ */
++ elts_head_next = elts_head;
++ rte_pktmbuf_free_seg(buf);
++ mpw_room -= (inl_pad + sizeof(inl_hdr) + length);
++ /* Add pad in the next packet if any. */
++ inl_pad = (((uintptr_t)mpw.data.raw +
++ (MLX5_WQE_DWORD_SIZE - 1)) &
++ ~(MLX5_WQE_DWORD_SIZE - 1)) -
++ (uintptr_t)mpw.data.raw;
++ } else {
++ /* No inline. Load a dseg of packet pointer. */
++ volatile rte_v128u32_t *dseg;
++
++ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED);
++ assert((inl_pad + sizeof(*dseg)) <= mpw_room);
++ assert(length == DATA_LEN(buf));
++ if (!tx_mlx5_wq_tailroom(txq,
++ (void *)((uintptr_t)mpw.data.raw
++ + inl_pad)))
++ dseg = (volatile void *)txq->wqes;
++ else
++ dseg = (volatile void *)
++ ((uintptr_t)mpw.data.raw +
++ inl_pad);
++ elts_head_next = (elts_head + 1) & (elts_n - 1);
++ (*txq->elts)[elts_head] = buf;
++ addr = rte_pktmbuf_mtod(buf, uintptr_t);
++ for (n = 0; n * RTE_CACHE_LINE_SIZE < length; n++)
++ rte_prefetch2((void *)(addr +
++ n * RTE_CACHE_LINE_SIZE));
++ naddr = htonll(addr);
++ *dseg = (rte_v128u32_t) {
++ htonl(length),
++ txq_mp2mr(txq, txq_mb2mp(buf)),
++ naddr,
++ naddr >> 32,
++ };
++ mpw.data.raw = (volatile void *)(dseg + 1);
++ mpw.total_len += (inl_pad + sizeof(*dseg));
++ ++j;
++ ++mpw.pkts_n;
++ mpw_room -= (inl_pad + sizeof(*dseg));
++ inl_pad = 0;
++ }
++ elts_head = elts_head_next;
++#ifdef MLX5_PMD_SOFT_COUNTERS
++ /* Increment sent bytes counter. */
++ txq->stats.obytes += length;
++#endif
++ ++i;
++ } while (i < pkts_n);
++ /* Take a shortcut if nothing must be sent. */
++ if (unlikely(i == 0))
++ return 0;
++ /* Check whether completion threshold has been reached. */
++ if (txq->elts_comp + j >= MLX5_TX_COMP_THRESH ||
++ (uint16_t)(txq->wqe_ci - txq->mpw_comp) >=
++ (1 << txq->wqe_n) / MLX5_TX_COMP_THRESH_INLINE_DIV) {
++ volatile struct mlx5_wqe *wqe = mpw.wqe;
++
++ /* Request completion on last WQE. */
++ wqe->ctrl[2] = htonl(8);
++ /* Save elts_head in unused "immediate" field of WQE. */
++ wqe->ctrl[3] = elts_head;
++ txq->elts_comp = 0;
++ txq->mpw_comp = txq->wqe_ci;
++ txq->cq_pi++;
++ } else {
++ txq->elts_comp += j;
++ }
++#ifdef MLX5_PMD_SOFT_COUNTERS
++ /* Increment sent packets counter. */
++ txq->stats.opackets += i;
++#endif
++ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED)
++ mlx5_empw_close(txq, &mpw);
++ else if (mpw.state == MLX5_MPW_STATE_OPENED)
++ mlx5_mpw_close(txq, &mpw);
++ /* Ring QP doorbell. */
++ mlx5_tx_dbrec(txq, mpw.wqe);
++ txq->elts_head = elts_head;
++ return i;
++}
++
++/**
+ * Translate RX completion flags to packet type.
+ *
+ * @param[in] cqe
+diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
+index 0db810c..4a4bd84 100644
+--- a/drivers/net/mlx5/mlx5_rxtx.h
++++ b/drivers/net/mlx5/mlx5_rxtx.h
+@@ -248,17 +248,21 @@ struct txq {
+ uint16_t elts_head; /* Current index in (*elts)[]. */
+ uint16_t elts_tail; /* First element awaiting completion. */
+ uint16_t elts_comp; /* Counter since last completion request. */
++ uint16_t mpw_comp; /* WQ index since last completion request. */
+ uint16_t cq_ci; /* Consumer index for completion queue. */
++ uint16_t cq_pi; /* Producer index for completion queue. */
+ uint16_t wqe_ci; /* Consumer index for work queue. */
+ uint16_t wqe_pi; /* Producer index for work queue. */
+ uint16_t elts_n:4; /* (*elts)[] length (in log2). */
+ uint16_t cqe_n:4; /* Number of CQ elements (in log2). */
+ uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */
+- uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
+ uint16_t inline_en:1; /* When set inline is enabled. */
+ uint16_t tso_en:1; /* When set hardware TSO is enabled. */
+ uint16_t tunnel_en:1;
+ /* When set TX offload for tunneled packets are supported. */
++ uint16_t mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
++ uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */
++ uint16_t inline_max_packet_sz; /* Max packet size for inlining. */
+ uint32_t qp_num_8s; /* QP number shifted by 8. */
+ volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
+ volatile void *wqes; /* Work queue (use volatile to write into). */
+@@ -329,6 +333,7 @@ uint16_t mlx5_tx_burst_secondary_setup(void *, struct rte_mbuf **, uint16_t);
+ uint16_t mlx5_tx_burst(void *, struct rte_mbuf **, uint16_t);
+ uint16_t mlx5_tx_burst_mpw(void *, struct rte_mbuf **, uint16_t);
+ uint16_t mlx5_tx_burst_mpw_inline(void *, struct rte_mbuf **, uint16_t);
++uint16_t mlx5_tx_burst_empw(void *, struct rte_mbuf **, uint16_t);
+ uint16_t mlx5_rx_burst(void *, struct rte_mbuf **, uint16_t);
+ uint16_t removed_tx_burst(void *, struct rte_mbuf **, uint16_t);
+ uint16_t removed_rx_burst(void *, struct rte_mbuf **, uint16_t);
+diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
+index 9d0c00f..bbfce75 100644
+--- a/drivers/net/mlx5/mlx5_txq.c
++++ b/drivers/net/mlx5/mlx5_txq.c
+@@ -266,6 +266,7 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ struct ibv_exp_cq_attr cq_attr;
+ } attr;
+ enum ibv_exp_query_intf_status status;
++ unsigned int cqe_n;
+ int ret = 0;
+
+ if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) {
+@@ -276,6 +277,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ (void)conf; /* Thresholds configuration (ignored). */
+ assert(desc > MLX5_TX_COMP_THRESH);
+ tmpl.txq.elts_n = log2above(desc);
++ if (priv->mps == MLX5_MPW_ENHANCED)
++ tmpl.txq.mpw_hdr_dseg = priv->mpw_hdr_dseg;
+ /* MRs will be registered in mp2mr[] later. */
+ attr.rd = (struct ibv_exp_res_domain_init_attr){
+ .comp_mask = (IBV_EXP_RES_DOMAIN_THREAD_MODEL |
+@@ -294,9 +297,12 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ .comp_mask = IBV_EXP_CQ_INIT_ATTR_RES_DOMAIN,
+ .res_domain = tmpl.rd,
+ };
++ cqe_n = ((desc / MLX5_TX_COMP_THRESH) - 1) ?
++ ((desc / MLX5_TX_COMP_THRESH) - 1) : 1;
++ if (priv->mps == MLX5_MPW_ENHANCED)
++ cqe_n += MLX5_TX_COMP_THRESH_INLINE_DIV;
+ tmpl.cq = ibv_exp_create_cq(priv->ctx,
+- (((desc / MLX5_TX_COMP_THRESH) - 1) ?
+- ((desc / MLX5_TX_COMP_THRESH) - 1) : 1),
++ cqe_n,
+ NULL, NULL, 0, &attr.cq);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+@@ -340,9 +346,24 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
+ tmpl.txq.max_inline =
+ ((priv->txq_inline + (RTE_CACHE_LINE_SIZE - 1)) /
+ RTE_CACHE_LINE_SIZE);
+- attr.init.cap.max_inline_data =
+- tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
+ tmpl.txq.inline_en = 1;
++ /* TSO and MPS can't be enabled concurrently. */
++ assert(!priv->tso || !priv->mps);
++ if (priv->mps == MLX5_MPW_ENHANCED) {
++ tmpl.txq.inline_max_packet_sz =
++ priv->inline_max_packet_sz;
++ /* To minimize the size of data set, avoid requesting
++ * too large WQ.
++ */
++ attr.init.cap.max_inline_data =
++ ((RTE_MIN(priv->txq_inline,
++ priv->inline_max_packet_sz) +
++ (RTE_CACHE_LINE_SIZE - 1)) /
++ RTE_CACHE_LINE_SIZE) * RTE_CACHE_LINE_SIZE;
++ } else {
++ attr.init.cap.max_inline_data =
++ tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE;
++ }
+ }
+ if (priv->tso) {
+ uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER +
+--
+2.7.4
+
diff --git a/src/plugins/dpdk/device/init.c b/src/plugins/dpdk/device/init.c
index 9dc3fcce900..538db6cb94e 100755
--- a/src/plugins/dpdk/device/init.c
+++ b/src/plugins/dpdk/device/init.c
@@ -790,7 +790,10 @@ dpdk_lib_init (dpdk_main_t * dm)
case VNET_DPDK_PMD_MLX5:
{
- char *pn_100g[] = { "MCX415A-CCAT", "MCX416A-CCAT", 0 };
+ char *pn_100g[] = { "MCX415A-CCAT", "MCX416A-CCAT",
+ "MCX556A-ECAT", "MCX556A-EDAT", "MCX555A-ECAT",
+ "MCX515A-CCAT", "MCX516A-CCAT", "MCX516A-CDAT", 0
+ };
char *pn_40g[] = { "MCX413A-BCAT", "MCX414A-BCAT",
"MCX415A-BCAT", "MCX416A-BCAT", "MCX4131A-BCAT", 0
};