diff options
Diffstat (limited to 'build/external/packages')
-rw-r--r-- | build/external/packages/dpdk.mk | 282 | ||||
-rw-r--r-- | build/external/packages/ipsec-mb.mk | 43 | ||||
-rw-r--r-- | build/external/packages/nasm.mk | 21 |
3 files changed, 346 insertions, 0 deletions
diff --git a/build/external/packages/dpdk.mk b/build/external/packages/dpdk.mk new file mode 100644 index 00000000000..72301e543af --- /dev/null +++ b/build/external/packages/dpdk.mk @@ -0,0 +1,282 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +DPDK_PKTMBUF_HEADROOM ?= 128 +DPDK_CACHE_LINE_SIZE ?= 64 +DPDK_DOWNLOAD_DIR ?= $(DL_CACHE_DIR) +DPDK_DEBUG ?= n +DPDK_MLX4_PMD ?= n +DPDK_MLX5_PMD ?= n +DPDK_TAP_PMD ?= n +DPDK_FAILSAFE_PMD ?= n + +DPDK_VERSION ?= 18.08 +DPDK_BASE_URL ?= http://fast.dpdk.org/rel +DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz +DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) +DPDK_18.05_TARBALL_MD5_CKSUM := 9fc86367cd9407ff6a8dfea56c4eddc4 +DPDK_18.08_TARBALL_MD5_CKSUM := da5e7fb25ab063c47e53929fb8c58be5 +MACHINE=$(shell uname -m) + +# replace dot with space, and if 3rd word exists we deal with stable dpdk rel +ifeq ($(word 3,$(subst ., ,$(DPDK_VERSION))),) +DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) +else +DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION) +endif + +ifeq ($(MACHINE),$(filter $(MACHINE),x86_64)) + AESNI ?= y + DPDK_BUILD_DEPS := ipsec-mb-install +else + AESNI ?= n +endif + +ifneq (,$(findstring clang,$(CC))) +DPDK_CC=clang +else ifneq (,$(findstring icc,$(CC))) +DPDK_CC=icc +else +DPDK_CC=gcc +endif + +############################################################################## +# Intel x86 +############################################################################## +ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686)) +DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC) +DPDK_MACHINE ?= nhm +DPDK_TUNE ?= core-avx2 + +############################################################################## +# ARM64 +############################################################################## +else ifeq ($(MACHINE),aarch64) +CROSS := +export CROSS +DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC) +DPDK_MACHINE ?= armv8a +DPDK_TUNE ?= generic + +CPU_IMP_ARM = 0x41 +CPU_IMP_CAVIUM = 0x43 + +CPU_PART_ARM_CORTEX_A53 = 0xd03 +CPU_PART_ARM_CORTEX_A57 = 0xd07 +CPU_PART_ARM_CORTEX_A72 = 0xd08 +CPU_PART_ARM_CORTEX_A73 = 0xd09 + +CPU_PART_CAVIUM_THUNDERX = 0x0a1 +CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2 +CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3 + +MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo) +MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo) + +ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM)) +############################################################################## +# Arm Cortex +############################################################################## +CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \ + $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \ + $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \ + $(CPU_PART_ARM_CORTEX_A73)/cortex-a73 +CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE))) +ifneq ($(CPU_TUNE),) +DPDK_TUNE = $(CPU_TUNE) +else +$(warning Unknown Arm CPU) +endif + +else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM)) +############################################################################## +# Cavium ThunderX +############################################################################## +ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \ + $(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX))) +DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC) +DPDK_MACHINE = thunderx +DPDK_CACHE_LINE_SIZE := 128 +else +$(warning Unknown Cavium CPU) +endif +endif + +############################################################################## +# Unknown platform +############################################################################## +else +$(error Unknown platform) +endif + +# compiler/linker custom arguments +ifeq ($(DPDK_CC),clang) +DPDK_CPU_CFLAGS := -fPIE -fPIC +else +DPDK_CPU_CFLAGS := -pie -fPIC +endif + +ifeq ($(DPDK_DEBUG),n) +DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) +else +DPDK_EXTRA_CFLAGS := -g -O0 +endif + +# -Wimplicit-fallthrough was introduced starting from GCC 7, +# and it requires newer version of ccache. +# Disable fallthrough warning for old ccache version. +ifeq ($(DPDK_CC),gcc) +GCC_VER_V = "7.0.0" +CCACHE_VER_V = "3.4.1" +GCC_VER = $(shell gcc --version | grep ^gcc | sed 's/^.* //g') +CCACHE_VER = $(shell ccache --version | grep ^ccache | sed 's/^.* //g') +ifeq ($(shell expr "$(GCC_VER)" ">=" "$(GCC_VER_V)"),1) +ifeq ($(shell expr "$(CCACHE_VER)" "<" "$(CCACHE_VER_V)"),1) +DPDK_EXTRA_CFLAGS += -Wimplicit-fallthrough=0 +endif +endif +endif + +DPDK_EXTRA_CFLAGS += -L$(I)/lib -I$(I)/include + +# assemble DPDK make arguments +DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ + T=$(DPDK_TARGET) \ + RTE_CONFIG_TEMPLATE=../custom-config \ + EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ + EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ + CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ + DESTDIR=$(I) \ + $(DPDK_MAKE_EXTRA_ARGS) + +define set +@if grep -q CONFIG_$1 $@ ; \ + then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ + else echo CONFIG_$1=$2 >> $@ ; \ +fi +endef + +all: build + +$(B)/custom-config: $(B)/.patch.ok Makefile + @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- + @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ + $(call set,RTE_MACHINE,$(DPDK_MACHINE)) + @# modify options + $(call set,RTE_MAX_LCORE,256) + $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) + $(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE)) + $(call set,RTE_LIBEAL_USE_HPET,y) + $(call set,RTE_BUILD_COMBINE_LIBS,y) + $(call set,RTE_PCI_CONFIG,y) + $(call set,RTE_PCI_EXTENDED_TAG,"on") + $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) + @# enable debug init for device drivers + $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_PMD_BOND,y) + $(call set,RTE_LIBRTE_IP_FRAG,y) + $(call set,RTE_LIBRTE_PMD_QAT,y) + $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI)) + $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI)) + $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD)) + $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) + $(call set,RTE_LIBRTE_PMD_SOFTNIC,n) + $(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD)) + $(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD)) + $(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD)) + $(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD)) + @# not needed + $(call set,RTE_LIBRTE_CFGFILE,n) + $(call set,RTE_LIBRTE_LPM,n) + $(call set,RTE_LIBRTE_ACL,n) + $(call set,RTE_LIBRTE_POWER,n) + $(call set,RTE_LIBRTE_DISTRIBUTOR,n) + $(call set,RTE_LIBRTE_PORT,n) + $(call set,RTE_LIBRTE_TABLE,n) + $(call set,RTE_LIBRTE_PIPELINE,n) + $(call set,RTE_LIBRTE_FLOW_CLASSIFY,n) + $(call set,RTE_KNI_KMOD,n) + $(call set,RTE_EAL_IGB_UIO,n) + @# currently broken in 18.02 + $(call set,RTE_LIBRTE_DPAA_BUS,n) + $(call set,RTE_LIBRTE_DPAA_MEMPOOL,n) + $(call set,RTE_LIBRTE_DPAA_PMD,n) + $(call set,RTE_LIBRTE_PMD_DPAA_SEC,n) + $(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n) + @rm -f .config.ok + +$(CURDIR)/$(DPDK_TARBALL): + @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ + then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ + else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ + fi + @rm -f $(B)/.download.ok + +DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL) + +$(B)/.download.ok: $(DPDK_DOWNLOADS) + @mkdir -p $(B) + @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum + @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ + ( echo "Bad Checksum! Please remove $< and retry" && \ + rm $(B)/$(DPDK_TARBALL).md5sum && false )) + @touch $@ + +.PHONY: download +download: $(B)/.download.ok + +$(B)/.extract.ok: $(B)/.download.ok + @echo --- extracting $(DPDK_TARBALL) --- + @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) + @touch $@ + +.PHONY: extract +extract: $(B)/.extract.ok + +$(B)/.patch.ok: $(B)/.extract.ok +ifneq ($(wildcard $(CURDIR)/patches/dpdk_$(DPDK_VERSION)/*.patch),) + @echo --- patching --- + @for f in $(CURDIR)/patches/dpdk_$(DPDK_VERSION)/*.patch ; do \ + echo Applying patch: $$(basename $$f) ; \ + patch -p1 -d $(DPDK_SOURCE) < $$f ; \ + done +endif + @touch $@ + +.PHONY: patch +patch: $(B)/.patch.ok + +$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config + @make $(DPDK_MAKE_ARGS) config + @touch $@ + +.PHONY: config +config: $(B)/.config.ok + +.PHONY: build-dpdk +build-dpdk: $(DPDK_BUILD_DEPS) + @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi + @make $(DPDK_MAKE_ARGS) install + +$(B)/.build.ok: build-dpdk + @touch $@ + +.PHONY: build +build: $(B)/.build.ok + +.PHONY: install +install: $(B)/.build.ok diff --git a/build/external/packages/ipsec-mb.mk b/build/external/packages/ipsec-mb.mk new file mode 100644 index 00000000000..42c86e9e5a2 --- /dev/null +++ b/build/external/packages/ipsec-mb.mk @@ -0,0 +1,43 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +ipsec-mb_version := 0.49 +ipsec-mb_tarball := v$(ipsec-mb_version).tar.gz +ipsec-mb_tarball_md5sum_0.49 := 3a2bee86f25f6c8ed720da5b4b8d4297 +ipsec-mb_tarball_md5sum_0.50 := c847ed77ae34da551237349f1c9db1e9 +ipsec-mb_tarball_md5sum := $(ipsec-mb_tarball_md5sum_$(ipsec-mb_version)) +ipsec-mb_tarball_strip_dirs := 1 +ipsec-mb_depends := nasm +ipsec-mb_url := http://github.com/01org/intel-ipsec-mb/archive/$(ipsec-mb_tarball) + +define ipsec-mb_config_cmds + @true +endef + +define ipsec-mb_build_cmds + @true +endef + +define ipsec-mb_install_cmds + @mkdir -p $(ipsec-mb_install_dir)/include + @make -C $(ipsec-mb_src_dir) -j \ + SHARED=n \ + EXTRA_CFLAGS=-fPIC \ + NASM=$(ipsec-mb_install_dir)/bin/nasm \ + PREFIX=$(ipsec-mb_install_dir) \ + install > $(ipsec-mb_install_log) +endef + +$(eval $(call package,ipsec-mb)) + + diff --git a/build/external/packages/nasm.mk b/build/external/packages/nasm.mk new file mode 100644 index 00000000000..1219b3310af --- /dev/null +++ b/build/external/packages/nasm.mk @@ -0,0 +1,21 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +nasm_version := 2.13.03 +nasm_tarball := nasm-$(nasm_version).tar.xz +nasm_tarball_md5sum := d5ca2ad7121ccbae69dd606b1038532c +nasm_tarball_strip_dirs := 1 +nasm_url := http://www.nasm.us/pub/nasm/releasebuilds/$(nasm_version)/$(nasm_tarball) +nasm_cflags := -Wno-implicit-fallthrough -std=c11 + +$(eval $(call package,nasm)) |