summaryrefslogtreecommitdiffstats
path: root/docs/cli-reference/interface/create_interface.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/cli-reference/interface/create_interface.rst')
-rw-r--r--docs/cli-reference/interface/create_interface.rst223
1 files changed, 223 insertions, 0 deletions
diff --git a/docs/cli-reference/interface/create_interface.rst b/docs/cli-reference/interface/create_interface.rst
new file mode 100644
index 00000000000..abd1f40de04
--- /dev/null
+++ b/docs/cli-reference/interface/create_interface.rst
@@ -0,0 +1,223 @@
+.. _interface:
+
+.. toctree::
+
+Create Interfaces Commands
+===========================
+This section contains those interface commands that are associated to creating an interface:
+
+* `Create Host-Interface`_
+* `Create Interface Memif`_
+* `Create Loopback Interface`_
+* `Create Sub-Interfaces`_
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Create Host-Interface
+++++++++++++++++++++++
+
+.. code-block:: console
+
+ create host-interface name <*ifname*> [*hw-addr <*mac-addr*>]
+
+
+Description
+------------
+
+Create a host interface that will attach to a linux AF_PACKET interface, one side of a veth pair.
+The veth pair must already exist. Once created, a new host interface will exist in VPP with the name
+'host-<*ifname*>', where '<*ifname*>' is the name of the specified veth pair.
+Use the `show interface` command to display host interface details.
+
+This command has the following optional parameters:
+
+ hw-addr <*mac-addr*> - Optional ethernet address, can be in either X:X:X:X:X:X unix or X.X.X cisco format
+
+Example Usage
+-------------
+
+Example of how to create a host interface tied to one side of an existing linux veth pair named vpp1:
+
+ .. code-block:: console
+
+ vpp# create host-interface name vpp1
+
+ host-vpp1
+
+Once the host interface is created, enable the interface using:
+
+ .. code-block:: console
+
+ vpp# set interface state host-vpp1 up
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** af_packet_create_command (src/vnet/devices/af_packet/cli.c line 133)
+
+**Implementation:** af_packet_create_command_fn
+
+Create Interface Memif
++++++++++++++++++++++++
+
+.. code-block:: console
+
+ create interface memif [id <*id*>] [socket-id <*socket-id*>] [ring-size <*size*>] [buffer-size <*size*>] [hw-addr <*mac-address*>] <master|slave> [rx-queues <*number*>] [tx-queues <*number*>] [mode ip] [secret <*string*>]
+
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** memif_create_command (src/plugins/memif/cli.c line 258)
+
+**Implementation:** memif_create_command_fn
+
+
+Create Loopback Interface
+++++++++++++++++++++++++++
+
+
+Create a loopback interface. Optionally, a MAC Address can be provided. If not provided, de:ad:00:00:00:<*loopId*> will be used.
+
+.. code-block:: console
+
+ create loopback interface [mac <*mac-addr*>] [instance <*instance*>]
+
+
+Example Usage
+--------------
+The following two command syntaxes are equivalent:
+
+ .. code-block:: console
+
+ vpp# loopback create-interface [mac <*mac-addr*>] [instance <*instance*>]
+
+ vpp# create loopback interface [mac <*mac-addr*>] [instance <*instance*>]
+
+Example of how to create a loopback interface:
+
+ .. code-block:: console
+
+ vpp# create loopback interface
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** create_loopback_interface_command (src/vnet/ethernet/interface.c line 879)
+
+**Implementation:** create_simulated_ethernet_interfaces
+
+
+Create Sub-Interfaces
+++++++++++++++++++++++
+
+This command is used to add VLAN IDs to interfaces, also known as
+subinterfaces. The primary input to this command is the *interface*
+and *subId* (subinterface Id) parameters. If no additional VLAN ID is
+provide, the VLAN ID is assumed to be the *subId*. The VLAN ID and
+*subId* can be different, but this is not recommended.
+
+This command has several variations:
+
+- **create sub-interfaces** <*interface*> <*subId*> - Create a subinterface
+ to process packets with a given 802.1q VLAN ID (same value as the
+ *subId*).
+- **create sub-interfaces** <*interface*> <*subId*> default - Adding the
+ *default* parameter indicates that packets with VLAN IDs that do
+ not match any other subinterfaces should be sent to this
+ subinterface.
+- **create sub-interfaces** <*interface*> <*subId*> untagged - Adding the
+ *untagged* parameter indicates that packets no VLAN IDs should be
+ sent to this subinterface.
+- **create sub-interfaces** <*interface*> <*subId*>-<*subId*> - Create a
+ range of subinterfaces to handle a range of VLAN IDs.
+- **create sub-interfaces** <*interface*> <*subId*> dot1q|dot1ad <*vlanId*>|any
+ [exact-match] - Use this command to explicitly specify the outer VLAN ID,
+ or to make the VLAN ID different from the *subId*.
+- **create sub-interfaces** <*interface*> <*subId*> dot1q|dot1ad <*vlanId*>|any
+ inner-dot1q <*vlanId*>|any [exact-match] - Use this command to
+ specify the outer VLAN ID and the inner VLAN ID.
+
+When *dot1q* or *dot1ad* is explicitly entered, subinterfaces can be
+configured as either *exact-match* or *non-exact match*. *Non-exact match* is
+the CLI default. If *exact-match* is specified, packets must have the
+same number of VLAN tags as the configuration. For *non-exact-match*,
+packets must at least that number of tags. L3 (routed) interfaces must
+be configured as exact-match. L2 interfaces are typically configured as
+non-exact-match. If *dot1q* or *dot1ad* is NOT entered, then the
+default behavior is *exact-match*.
+
+Use the **show interface** command to display all subinterfaces.
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ create sub-interfaces <interface> {<subId> [default|untagged]} | {<subId>-<subId>} | {<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}
+
+Example Usage
+--------------
+
+Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11
+
+The previous example is shorthand and is equivalent to:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match
+
+Example of how to create a subinterface number that is different from the VLAN ID:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100
+
+Examples of how to create q-in-q and q-in-any subinterfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any
+
+Examples of how to create dot1ad interfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200
+
+Examples of *exact-match* versus non-exact match. A packet with outer VLAN 100 and inner VLAN 200 would match this interface, because the default is non-exact match:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100
+
+However, the same packet would NOT match this interface because *exact-match* is specified and only one VLAN is configured, but packet contains two VLANs:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match
+
+Example of how to created a subinterface to process untagged packets:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 untagged
+
+Example of how to created a subinterface to process any packet with a VLAN ID that does not match any other subinterface:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 7 default
+
+When subinterfaces are created, they are in the down state. Example of how to enable a newly created subinterface:
+
+.. code-block:: console
+
+ vpp# set interface GigabitEthernet2/0/0.7 up
+