summaryrefslogtreecommitdiffstats
path: root/docs/gettingstarted/developers/featurearcs.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/gettingstarted/developers/featurearcs.md')
-rw-r--r--docs/gettingstarted/developers/featurearcs.md224
1 files changed, 0 insertions, 224 deletions
diff --git a/docs/gettingstarted/developers/featurearcs.md b/docs/gettingstarted/developers/featurearcs.md
deleted file mode 100644
index f1e3ec47d05..00000000000
--- a/docs/gettingstarted/developers/featurearcs.md
+++ /dev/null
@@ -1,224 +0,0 @@
-Feature Arcs
-============
-
-A significant number of vpp features are configurable on a per-interface
-or per-system basis. Rather than ask feature coders to manually
-construct the required graph arcs, we built a general mechanism to
-manage these mechanics.
-
-Specifically, feature arcs comprise ordered sets of graph nodes. Each
-feature node in an arc is independently controlled. Feature arc nodes
-are generally unaware of each other. Handing a packet to "the next
-feature node" is quite inexpensive.
-
-The feature arc implementation solves the problem of creating graph arcs
-used for steering.
-
-At the beginning of a feature arc, a bit of setup work is needed, but
-only if at least one feature is enabled on the arc.
-
-On a per-arc basis, individual feature definitions create a set of
-ordering dependencies. Feature infrastructure performs a topological
-sort of the ordering dependencies, to determine the actual feature
-order. Missing dependencies **will** lead to runtime disorder. See
-<https://gerrit.fd.io/r/#/c/12753> for an example.
-
-If no partial order exists, vpp will refuse to run. Circular dependency
-loops of the form "a then b, b then c, c then a" are impossible to
-satisfy.
-
-Adding a feature to an existing feature arc
--------------------------------------------
-
-To nobody's great surprise, we set up feature arcs using the typical
-"macro -> constructor function -> list of declarations" pattern:
-
-```c
- VNET_FEATURE_INIT (mactime, static) =
- {
- .arc_name = "device-input",
- .node_name = "mactime",
- .runs_before = VNET_FEATURES ("ethernet-input"),
- };
-```
-
-This creates a "mactime" feature on the "device-input" arc.
-
-Once per frame, dig up the vnet\_feature\_config\_main\_t corresponding
-to the "device-input" feature arc:
-
-```c
- vnet_main_t *vnm = vnet_get_main ();
- vnet_interface_main_t *im = &vnm->interface_main;
- u8 arc = im->output_feature_arc_index;
- vnet_feature_config_main_t *fcm;
-
- fcm = vnet_feature_get_config_main (arc);
-```
-
-Note that in this case, we've stored the required arc index - assigned
-by the feature infrastructure - in the vnet\_interface\_main\_t. Where
-to put the arc index is a programmer's decision when creating a feature
-arc.
-
-Per packet, set next0 to steer packets to the next node they should
-visit:
-
-```c
- vnet_get_config_data (&fcm->config_main,
- &b0->current_config_index /* value-result */,
- &next0, 0 /* # bytes of config data */);
-```
-
-Configuration data is per-feature arc, and is often unused. Note that
-it's normal to reset next0 to divert packets elsewhere; often, to drop
-them for cause:
-
-```c
- next0 = MACTIME_NEXT_DROP;
- b0->error = node->errors[DROP_CAUSE];
-```
-
-Creating a feature arc
-----------------------
-
-Once again, we create feature arcs using constructor macros:
-
-```c
- VNET_FEATURE_ARC_INIT (ip4_unicast, static) =
- {
- .arc_name = "ip4-unicast",
- .start_nodes = VNET_FEATURES ("ip4-input", "ip4-input-no-checksum"),
- .arc_index_ptr = &ip4_main.lookup_main.ucast_feature_arc_index,
- };
-```
-
-In this case, we configure two arc start nodes to handle the
-"hardware-verified ip checksum or not" cases. During initialization,
-the feature infrastructure stores the arc index as shown.
-
-In the head-of-arc node, do the following to send packets along the
-feature arc:
-
-```c
- ip_lookup_main_t *lm = &im->lookup_main;
- arc = lm->ucast_feature_arc_index;
-```
-
-Once per packet, initialize packet metadata to walk the feature arc:
-
-```c
-vnet_feature_arc_start (arc, sw_if_index0, &next, b0);
-```
-
-Enabling / Disabling features
------------------------------
-
-Simply call vnet_feature_enable_disable to enable or disable a specific
-feature:
-
-```c
- vnet_feature_enable_disable ("device-input", /* arc name */
- "mactime", /* feature name */
- sw_if_index, /* Interface sw_if_index */
- enable_disable, /* 1 => enable */
- 0 /* (void *) feature_configuration */,
- 0 /* feature_configuration_nbytes */);
-```
-
-The feature_configuration opaque is seldom used.
-
-If you wish to make a feature a _de facto_ system-level concept, pass
-sw_if_index=0 at all times. Sw_if_index 0 is always valid, and
-corresponds to the "local" interface.
-
-Related "show" commands
------------------------
-
-To display the entire set of features, use "show features [verbose]". The
-verbose form displays arc indices, and feature indicies within the arcs
-
-```
-$ vppctl show features verbose
-Available feature paths
-<snip>
-[14] ip4-unicast:
- [ 0]: nat64-out2in-handoff
- [ 1]: nat64-out2in
- [ 2]: nat44-ed-hairpin-dst
- [ 3]: nat44-hairpin-dst
- [ 4]: ip4-dhcp-client-detect
- [ 5]: nat44-out2in-fast
- [ 6]: nat44-in2out-fast
- [ 7]: nat44-handoff-classify
- [ 8]: nat44-out2in-worker-handoff
- [ 9]: nat44-in2out-worker-handoff
- [10]: nat44-ed-classify
- [11]: nat44-ed-out2in
- [12]: nat44-ed-in2out
- [13]: nat44-det-classify
- [14]: nat44-det-out2in
- [15]: nat44-det-in2out
- [16]: nat44-classify
- [17]: nat44-out2in
- [18]: nat44-in2out
- [19]: ip4-qos-record
- [20]: ip4-vxlan-gpe-bypass
- [21]: ip4-reassembly-feature
- [22]: ip4-not-enabled
- [23]: ip4-source-and-port-range-check-rx
- [24]: ip4-flow-classify
- [25]: ip4-inacl
- [26]: ip4-source-check-via-rx
- [27]: ip4-source-check-via-any
- [28]: ip4-policer-classify
- [29]: ipsec-input-ip4
- [30]: vpath-input-ip4
- [31]: ip4-vxlan-bypass
- [32]: ip4-lookup
-<snip>
-```
-
-Here, we learn that the ip4-unicast feature arc has index 14, and that
-e.g. ip4-inacl is the 25th feature in the generated partial order.
-
-To display the features currently active on a specific interface,
-use "show interface <name> features":
-
-```
-$ vppctl show interface GigabitEthernet3/0/0 features
-Feature paths configured on GigabitEthernet3/0/0...
-<snip>
-ip4-unicast:
- nat44-out2in
-<snip>
-```
-
-Table of Feature Arcs
----------------------
-
-Simply search for name-strings to track down the arc definition, location of
-the arc index, etc.
-
-```
- | Arc Name |
- |------------------|
- | device-input |
- | ethernet-output |
- | interface-output |
- | ip4-drop |
- | ip4-local |
- | ip4-multicast |
- | ip4-output |
- | ip4-punt |
- | ip4-unicast |
- | ip6-drop |
- | ip6-local |
- | ip6-multicast |
- | ip6-output |
- | ip6-punt |
- | ip6-unicast |
- | mpls-input |
- | mpls-output |
- | nsh-output |
-```