aboutsummaryrefslogtreecommitdiffstats
path: root/docs/gettingstarted/users/configuring
diff options
context:
space:
mode:
Diffstat (limited to 'docs/gettingstarted/users/configuring')
-rw-r--r--docs/gettingstarted/users/configuring/hugepages.rst27
-rw-r--r--docs/gettingstarted/users/configuring/index.rst4
2 files changed, 16 insertions, 15 deletions
diff --git a/docs/gettingstarted/users/configuring/hugepages.rst b/docs/gettingstarted/users/configuring/hugepages.rst
index 76ac7d0807d..da812e37048 100644
--- a/docs/gettingstarted/users/configuring/hugepages.rst
+++ b/docs/gettingstarted/users/configuring/hugepages.rst
@@ -3,13 +3,14 @@
Huge Pages
----------
-VPP requires *'hugepages'* to run. VPP will overwrite existing hugepage settings
-when VPP is installed. By default, VPP sets the number of hugepages on a system
-to 1024 2M hugepages (1G hugepages are no longer supported). This is the number
-of hugepages on the system, not just used by VPP.
+VPP requires *hugepages* to run during VPP operation, to manage large pages of memory.
+During VPP installation, VPP will overwrite the existing hugepage settings. By
+default, VPP sets the number of hugepages on a system to 1024 2M hugepages (1G hugepages
+are no longer supported). This is the number of hugepages on the system, not just used by VPP.
-When VPP is installed, the following file is copied to the system and used to apply the
-hugepage settings on VPP installation and system reboot:
+When VPP is installed, the following configuration file is copied to the system. The
+hugepage settings are applied in the VPP installation and on system reboots. To set
+the hugepage settings, perform the following commands:
.. code-block:: console
@@ -30,10 +31,10 @@ hugepage settings on VPP installation and system reboot:
# to current shmmax value.
kernel.shmmax=2147483648
-Depending on how the system is being used, this file can be updated to adjust
+Depending on how the system is being used, this configuration file can be updated to adjust
the number of hugepages reserved on a system. Below are some examples of
-possible values.
-
+possible settings.
+
For a small VM with minimal workload:
.. code-block:: console
@@ -54,9 +55,9 @@ For a large system running multiple VMs, each needing its own set of hugepages:
.. note::
If VPP is being run in a Virtual Machine (VM), the VM must have hugepage
- backing. When VPP is installed, it will attempt to overwrite existing
- hugepage setting. If the VM does not have hugepage backing, this will fail,
- but this may go unnoticed. When the VM is rebooted, on system startup,
- *'vm.nr_hugepages'* will be reapplied, will fail, and the VM will abort kernel
+ backing. When VPP is installed, it will attempt to overwrite existing the
+ hugepage setting. If the VM does not have hugepage backing, the install will fail,
+ but the failure may go unnoticed. When the VM is rebooted, on system startup,
+ *'vm.nr_hugepages'* will be reapplied, and will fail, and the VM will abort kernel
boot, locking up the VM. To avoid this scenario, ensure the VM has enough
hugepage backing.
diff --git a/docs/gettingstarted/users/configuring/index.rst b/docs/gettingstarted/users/configuring/index.rst
index f1244c61a4f..0de77adea6c 100644
--- a/docs/gettingstarted/users/configuring/index.rst
+++ b/docs/gettingstarted/users/configuring/index.rst
@@ -3,8 +3,8 @@
Configuring VPP
==================
-There is some basic configuration that is needed to run FD.io VPP. This section
-describes the basic configuration:
+There is some basic configuration that needs to be performed before running
+FD.io VPP. This section describes the configuration process:
.. toctree::
:maxdepth: 2