diff options
Diffstat (limited to 'docs/gettingstarted/users/installing')
| -rw-r--r-- | docs/gettingstarted/users/installing/centos.rst | 247 | ||||
| -rw-r--r-- | docs/gettingstarted/users/installing/index.rst | 51 | ||||
| -rw-r--r-- | docs/gettingstarted/users/installing/opensuse.rst | 57 | ||||
| -rw-r--r-- | docs/gettingstarted/users/installing/packages.rst | 85 | ||||
| -rw-r--r-- | docs/gettingstarted/users/installing/ubuntu.rst | 87 |
5 files changed, 0 insertions, 527 deletions
diff --git a/docs/gettingstarted/users/installing/centos.rst b/docs/gettingstarted/users/installing/centos.rst deleted file mode 100644 index dae24f6b4c8..00000000000 --- a/docs/gettingstarted/users/installing/centos.rst +++ /dev/null @@ -1,247 +0,0 @@ -.. _centos: - -.. toctree:: - -Setup the fd.io Repository - Centos 7 -===================================== - -Update the OS -------------- - -Before starting the repository setup, it is a good idea to first update and upgrade -the OS; run the following command to update the OS: - -.. code-block:: console - - $ sudo yum update - - -Point to the Repository ------------------------ - -For CentOS based systems, there are two respositories to pull VPP binaries from: - -* CentOS NFV SIG Repository -* Nexus Repository - - -CentOS NFV SIG Repository -^^^^^^^^^^^^^^^^^^^^^^^^^ - -VPP is not in the official CentOS 7 distro; however, CentOS has Special -Interest Groups (SIG), which are smaller groups within the CentOS community that -focus on a small set of issues. The CentOS NFV (Network Function Virtualization) -SIG was created to provide a CentOS-based stack that will serve as a platform - -To install released packages from the CentOS NFV SIG Repository on an updated -Centos 7 system, first, install the CentOS NFV SIG FIDO repo file by running the -following command: - -.. code-block:: console - - $ sudo yum install centos-release-fdio - -then **'Install VPP RPMs'**, as described below. - -This will install the latest VPP version from the repository. To install an -older version, once the CentOS NFV SIG FDIO repo file has been installed, list -the stored versions: - -.. code-block:: console - - $ sudo yum --showduplicates list vpp* | expand - Loaded plugins: fastestmirror - Loading mirror speeds from cached hostfile - * base: repos-va.psychz.net - * epel: download-ib01.fedoraproject.org - * extras: mirror.siena.edu - * updates: repo1.ash.innoscale.net - Available Packages - vpp.x86_64 17.10-1 centos-fdio - vpp.x86_64 18.01.1-1 centos-fdio - vpp.x86_64 18.01.2-1 centos-fdio - vpp.x86_64 18.04-1 centos-fdio - vpp-api-java.x86_64 17.10-1 centos-fdio - vpp-api-java.x86_64 18.01.1-1 centos-fdio - vpp-api-java.x86_64 18.01.2-1 centos-fdio - vpp-api-java.x86_64 18.04-1 centos-fdio - vpp-api-lua.x86_64 17.10-1 centos-fdio - vpp-api-lua.x86_64 18.01.1-1 centos-fdio - vpp-api-lua.x86_64 18.01.2-1 centos-fdio - vpp-api-lua.x86_64 18.04-1 centos-fdio - vpp-api-python.x86_64 17.10-1 centos-fdio - vpp-api-python.x86_64 18.01.1-1 centos-fdio - vpp-api-python.x86_64 18.01.2-1 centos-fdio - vpp-api-python.x86_64 18.04-1 centos-fdio - vpp-devel.x86_64 17.10-1 centos-fdio - vpp-devel.x86_64 18.01.1-1 centos-fdio - vpp-devel.x86_64 18.01.2-1 centos-fdio - vpp-devel.x86_64 18.04-1 centos-fdio - vpp-lib.x86_64 17.10-1 centos-fdio - vpp-lib.x86_64 18.01.1-1 centos-fdio - vpp-lib.x86_64 18.01.2-1 centos-fdio - vpp-lib.x86_64 18.04-1 centos-fdio - vpp-plugins.x86_64 17.10-1 centos-fdio - vpp-plugins.x86_64 18.01.1-1 centos-fdio - vpp-plugins.x86_64 18.01.2-1 centos-fdio - vpp-plugins.x86_64 18.04-1 centos-fdio - vpp-selinux-policy.x86_64 18.04-1 centos-fdio - -Then install a particular version: - -.. code-block:: console - - $ sudo yum install vpp-17.10-1.x86_64 - - -Nexus Repository -^^^^^^^^^^^^^^^^ - -Build artifacts are also posted to a FD.io Nexus Repository. This includes -official point releases, as well as nightly builds. To use any of these build -artifacts, create a file *'/etc/yum.repos.d/fdio-release.repo'* with the -content that points to the version needed. Below are some common examples of -the content needed: - - -VPP Latest Release -"""""""""""""""""" - -To allow *'yum'* access to the official VPP releases, create the file -*'/etc/yum.repos.d/fdio-release.repo'* with the following content. - -.. code-block:: console - - $ cat /etc/yum.repos.d/fdio-release.repo - [fdio-release] - name=fd.io release branch latest merge - baseurl=https://nexus.fd.io/content/repositories/fd.io.centos7/ - enabled=1 - gpgcheck=0 - -The *'yum install vpp'* command will install the most recent release. To -install older releases, run the following command to get the list of releases -provided. - -.. code-block:: console - - $ sudo yum --showduplicates list vpp* | expand - -Then choose the release to install. See **'CentOS NFV SIG Repository'** for -sample *'yum --showduplicates list'* output and an example of installing a -particular version of the RPMs. - -VPP Stable Branch -""""""""""""""""""" - -To allow *yum* access to the build artifacts for a VPP stable branch, create -the file *'/etc/yum.repos.d/fdio-release.repo'* with the following content. - -.. code-block:: console - - $ cat /etc/yum.repos.d/fdio-release.repo - [fdio-stable-1804] - name=fd.io stable/1804 branch latest merge - baseurl=https://nexus.fd.io/content/repositories/fd.io.stable.1804.centos7/ - enabled=1 - gpgcheck=0 - -For other stable branches, replace the *'1804'* from the above content with the -desired release. Examples: 1606, 1609, 1701, 1704, 1707, 1710, 1804, 1807 - -The *'yum install vpp'* command will install the most recent build on the -branch, not the latest offical release. Run the following command to get the -list of images produce by the branch: - -.. code-block:: console - - $ sudo yum --showduplicates list vpp* | expand - -Then choose the image to install. See **'CentOS NFV SIG Repository'** for -sample *'yum --showduplicates list'* output and an example of installing a -particular version of the RPMs. - - -VPP Master Branch -""""""""""""""""""" - -To allow *yum* access to the nightly builds from the VPP master branch, create -the file *'/etc/yum.repos.d/fdio-release.repo'* with the following content. - -.. code-block:: console - - $ cat /etc/yum.repos.d/fdio-release.repo - [fdio-master] - name=fd.io master branch latest merge - baseurl=https://nexus.fd.io/content/repositories/fd.io.master.centos7/ - enabled=1 - gpgcheck=0 - -The *'yum install vpp'* command will install the most recent build on the -branch. Run the following command to get the list of images produce by the -branch. - -.. code-block:: console - - $ sudo yum --showduplicates list vpp* | expand - -Then choose the image to install. See **'CentOS NFV SIG Repository'** for -sample *'yum --showduplicates list'* output and an example of installing a -particular version of the RPMs. - - -Install VPP RPMs -================ - -To install the VPP packet engine, run the following command: - -.. code-block:: console - - $ sudo yum install vpp - -The *vpp* RPM depends on the *vpp-lib* and *vpp-selinux-policy* -RPMs, so they will be installed as well. - -.. note:: - - The *vpp-selinux-policy* will not enable SELinux on the system. It - will install a Custom VPP SELinux policy that will be used if SELinux is - enabled at any time. - -There are additional packages that are optional. These packages can be -combined with the command above and installed all at once, or installed as -needed: - -.. code-block:: console - - $ sudo yum install vpp-plugins vpp-devel vpp-api-python vpp-api-lua vpp-api-java - -Starting VPP -============ - -Once VPP is installed on the system, to run VPP as a systemd service on CentOS, -run the following command: - -.. code-block:: console - - $ sudo systemctl start vpp - -Then to enable VPP to start on system reboot, run the following command: - -.. code-block:: console - - $ sudo systemctl enable vpp - -Outside of running VPP as a systemd service, VPP can be started manually or -made to run within GDB for debugging. See :ref:`running` for more details and -ways to tailor VPP to a specific system. - - -Uninstall the VPP RPMs -====================== - -To uninstall a VPP RPM, run the following command: - -.. code-block:: console - - $ sudo yum autoremove vpp* diff --git a/docs/gettingstarted/users/installing/index.rst b/docs/gettingstarted/users/installing/index.rst deleted file mode 100644 index 12a5ab8e015..00000000000 --- a/docs/gettingstarted/users/installing/index.rst +++ /dev/null @@ -1,51 +0,0 @@ -.. _installing: - -.. toctree:: - -.. _installingVPP: - -Installing VPP from Packages -============================== - -If you want to use VPP it can be convenient to install the binaries from -existing packages. This guide describes how to pull, install and run the VPP packages. - -.. toctree:: - -Installing VPP ---------------- - -This section provides directions on how to Install VPP binaries on Ubuntu, Centos, -and openSUSE platforms. - -Installing on Ubuntu -^^^^^^^^^^^^^^^^^^^^^ -The following are instructions on how to install VPP on Ubuntu. - -.. toctree:: - - ubuntu - -Installing on Centos -^^^^^^^^^^^^^^^^^^^^ -The following are instructions on how to install VPP on Centos. - -.. toctree:: - - centos - -Installing on openSUSE -^^^^^^^^^^^^^^^^^^^^^^ -The following are instructions on how to install VPP on openSUSE. - -.. toctree:: - - opensuse - -Package Descriptions --------------------- -The following is a brief description of the packages to be installed with VPP. - -.. toctree:: - - packages diff --git a/docs/gettingstarted/users/installing/opensuse.rst b/docs/gettingstarted/users/installing/opensuse.rst deleted file mode 100644 index 6d7873820dc..00000000000 --- a/docs/gettingstarted/users/installing/opensuse.rst +++ /dev/null @@ -1,57 +0,0 @@ -.. _opensuse: - -.. toctree:: - -Installing -========== - -To install VPP on openSUSE, first install the following release, and then execute -the associated commands. - -openSUSE Tumbleweed (rolling release) ------------------------------------------------------------- - -.. code-block:: console - - sudo zypper install vpp vpp-plugins - -openSUSE Leap 42.3 --------------------------------- - -.. code-block:: console - - sudo zypper addrepo --name network https://download.opensuse.org/repositories/network/openSUSE_Leap_42.3/network.repo - sudo zypper install vpp vpp-plugins - -Uninstall -========= - -To uninstall the vpp plugins, run the following command: - -.. code-block:: console - - sudo zypper remove -u vpp vpp-plugins - -openSUSE Tumbleweed (rolling release) -------------------------------------- - -To uninstall the openSUSE Tumbleweed, run the following command: - -.. code-block:: console - - sudo zypper remove -u vpp vpp-plugins - -openSUSE Leap 42.3 ------------------- - -.. code-block:: console - - sudo zypper remove -u vpp vpp-plugins - sudo zypper removerepo network - -For More Information -==================== -For more information on VPP with openSUSE, please look at the following post. - -* https://www.suse.com/communities/blog/vector-packet-processing-vpp-opensuse/ - diff --git a/docs/gettingstarted/users/installing/packages.rst b/docs/gettingstarted/users/installing/packages.rst deleted file mode 100644 index 55ddf05fdad..00000000000 --- a/docs/gettingstarted/users/installing/packages.rst +++ /dev/null @@ -1,85 +0,0 @@ -.. _packages: - -Packages -========== - -This section identifies the different VPP packages and describes their contents. - -.. toctree:: - -vpp ---- - -Vector Packet Processing executables. This is the primary package that must be -installed to use VPP. This package contains: - -* vpp - the vector packet engine -* vpp_api_test - vector packet engine API test tool -* vpp_json_test - vector packet engine JSON test tool - -vpp-lib -------- - -Vector Packet Processing runtime libraries. The *'vpp'* package depends on this -package, so it will always be installed. This package contains the VPP shared -libraries, including: - -* vppinfra - Foundation library supporting vectors, hashes, bitmaps, pools, and string formatting. -* svm - vm library -* vlib - vector processing library -* vlib-api - binary API library -* vnet - network stack library - -vpp-plugins ------------ - -Vector Packet Processing plugin modules. - -* acl -* dpdk -* flowprobe -* gtpu -* ixge -* kubeproxy -* l2e -* lb -* memif -* nat -* pppoe -* sixrd -* stn - -vpp-dbg -------- - -Vector Packet Processing debug symbols. - -vpp-dev -------- - -Vector Packet Processing development support. This package contains -development support files for the VPP libraries. - -vpp-api-java ------------- - -JAVA binding for the VPP Binary API. - -vpp-api-python --------------- - -Python binding for the VPP Binary API. - -vpp-api-lua ------------ - -Lua binding for the VPP Binary API. - -vpp-selinux-policy ------------------- - -This package contains the VPP Custom SELinux Policy. It is only generated for -Fedora and CentOS distros. For those distros, the *'vpp'* package depends on -this package, so it will always be installed. It will not enable SELinux on -the system. It will install a Custom VPP SELinux policy that will be used if -SELinux is enabled at any time. diff --git a/docs/gettingstarted/users/installing/ubuntu.rst b/docs/gettingstarted/users/installing/ubuntu.rst deleted file mode 100644 index d1daed14ddb..00000000000 --- a/docs/gettingstarted/users/installing/ubuntu.rst +++ /dev/null @@ -1,87 +0,0 @@ -.. _ubuntu: - -.. toctree:: - -Ubuntu 16.04 - Setup the fd.io Repository -========================================== - -Choose one of the following releases to install. - - -Update the OS ------------------------ - -It is a good idea to first update and upgrade the OS before starting; run the following command to update the OS: - -.. code-block:: console - - apt-get update - - -Point to the Repository ------------------------------------ - -Create a file **/etc/apt/sources.list.d/99fd.io.list** with contents that point to -the version needed. The contents needed are shown below. - -.. _install_vpp: - -VPP latest Release -^^^^^^^^^^^^^^^^^^^ - -Create the file **/etc/apt/sources.list.d/99fd.io.list** that contain the following contents: - -.. code-block:: console - - deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./ - - -VPP stable/1804 Branch -^^^^^^^^^^^^^^^^^^^^^^^ - -Create the file **/etc/apt/sources.list.d/99fd.io.list** that contain the following contents: - -.. code-block:: console - - deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.stable.1804.ubuntu.xenial.main/ ./ - - -VPP master Branch -^^^^^^^^^^^^^^^^^^^^ - -Create the file **/etc/apt/sources.list.d/99fd.io.list** that contain the following contents: - -.. code-block:: console - - deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.master.ubuntu.xenial.main/ ./ - - -Install the Mandatory Packages -=============================== - -Install the mandatory packages by running the following commands: - -.. code-block:: console - - sudo apt-get update - sudo apt-get install vpp-lib vpp vpp-plugins - - -Install the Optional Packages -============================== - -Install the optional packages by running the following command: - -.. code-block:: console - - sudo apt-get install vpp-dbg vpp-dev vpp-api-java vpp-api-python vpp-api-lua - - -Uninstall the Packages -====================== - -Uninstall the packages by running the following command: - -.. code-block:: console - - sudo apt-get remove --purge vpp* |