summaryrefslogtreecommitdiffstats
path: root/docs/guides/progressivevpp/index.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/guides/progressivevpp/index.rst')
-rw-r--r--docs/guides/progressivevpp/index.rst176
1 files changed, 0 insertions, 176 deletions
diff --git a/docs/guides/progressivevpp/index.rst b/docs/guides/progressivevpp/index.rst
deleted file mode 100644
index 8be904dc911..00000000000
--- a/docs/guides/progressivevpp/index.rst
+++ /dev/null
@@ -1,176 +0,0 @@
-.. _progressivevpp:
-
-.. toctree::
-
-########################
-Progressive VPP Tutorial
-########################
-
-Overview
-========
-
-Learn to run FD.io VPP on a single Ubuntu 16.04 VM using Vagrant with this walkthrough
-covering basic FD.io VPP senarios. Useful FD.io VPP commands will be used, and
-will discuss basic operations, and the state of a running FD.io VPP on a system.
-
-.. note::
-
- This is *not* intended to be a 'How to Run in a Production Environment' set of instructions.
-
-.. _introduction-to-vpp-vagrant:
-
-Setting up your environment
-===========================
-
-All of these exercises are designed to be performed on an Ubuntu 16.04 (Xenial) box.
-
-* If you have an Ubuntu 16.04 box on which you have sudo or root access, you can feel free to use that.
-* If you do not, a Vagrantfile is provided to setup a basic Ubuntu 16.04 box for you in the the steps below.
-
-Running Vagrant
-===============
-
-FD.io VPP runs in userspace. In a production environment you will often run it with DPDK to connect to real NICs or vhost to connect to VMs.
-In those circumstances you usually run a single instance of FD.io VPP.
-
-For purposes of this tutorial, it is going to be extremely useful to run multiple instances of vpp, and connect them to each other to form
-a topology. Fortunately, FD.io VPP supports this.
-
-When running multiple FD.io VPP instances, each instance needs to have specified a 'name' or 'prefix'. In the example below, the 'name' or 'prefix' is "vpp1". Note that only one instance can use the dpdk plugin, since this plugin is trying to acquire a lock on a file.
-
-.. toctree::
-
- settingupenvironment.rst
-
-The DPDK Plugin will be disabled for this section. The link below demonstrates how this is done.
-
-.. toctree::
-
- removedpdkplugin.rst
-
-Start a FD.io VPP shell using vppctl
-====================================
-
-The command *$ sudo vppctl* will launch a FD.io VPP shell with which you can run multiple FD.io VPP commands interactively by running:
-
-.. code-block:: console
-
- $ sudo vppctl
- _______ _ _ _____ ___
- __/ __/ _ \ (_)__ | | / / _ \/ _ \
- _/ _// // / / / _ \ | |/ / ___/ ___/
- /_/ /____(_)_/\___/ |___/_/ /_/
- vpp# show ver
- vpp v18.07-release built by root on c469eba2a593 at Mon Jul 30 23:27:03 UTC 2018
-
-Create an Interface
-===================
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Create a veth interface in Linux host
-#. Assign an IP address to one end of the veth interface in the Linux host
-#. Create a vpp host-interface that connected to one end of a veth interface via AF_PACKET
-#. Add an ip address to a vpp interface
-
-.. toctree::
-
- interface.rst
-
-Traces
-======
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Setup a 'trace'
-#. View a 'trace'
-#. Clear a 'trace'
-#. Verify using ping from host
-#. Ping from vpp
-#. Examine Arp Table
-#. Examine ip fib
-
-.. toctree::
-
- traces.rst
-
-Routing
-=======
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-In this exercise you will learn these new skills:
-
-#. Add route to Linux Host routing table
-#. Add route to FD.io VPP routing table
-
-And revisit the old ones:
-
-#. Examine FD.io VPP routing table
-#. Enable trace on vpp1 and vpp2
-#. ping from host to FD.io VPP
-#. Examine and clear trace on vpp1 and vpp2
-#. ping from FD.io VPP to host
-#. Examine and clear trace on vpp1 and vpp2
-
-
-.. toctree::
-
- routing.rst
-
-Connecting Two FD.io VPP Instances
-==================================
-
-memif is a very high performance, direct memory interface type which can
-be used between FD.io VPP instances to form a topology. It uses a file socket
-for a control channel to set up that shared memory.
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-You will learn the following new skill in this exercise:
-
-#. Create a memif interface between two FD.io VPP instances
-
-You should be able to perform this exercise with the following skills
-learned in previous exercises:
-
-#. Run a second FD.io VPP instance
-#. Add an ip address to a FD.io VPP interface
-#. Ping from FD.io VPP
-
-.. toctree::
-
- twovppinstances.rst
-
-Switching
-=========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Associate an interface with a bridge domain
-#. Create a loopback interaface
-#. Create a BVI (Bridge Virtual Interface) for a bridge domain
-#. Examine a bridge domain
-
-.. toctree::
-
- switching.rst
-
-Source NAT
-==========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Abusing networks namespaces for fun and profit
-#. Configuring snat address
-#. Configuring snat inside and outside interfaces
-
-.. toctree::
-
- sourceNAT.rst