summaryrefslogtreecommitdiffstats
path: root/docs/guides/progressivevpp
diff options
context:
space:
mode:
Diffstat (limited to 'docs/guides/progressivevpp')
-rw-r--r--docs/guides/progressivevpp/index.rst176
-rw-r--r--docs/guides/progressivevpp/interface.rst126
-rw-r--r--docs/guides/progressivevpp/removedpdkplugin.rst18
-rw-r--r--docs/guides/progressivevpp/routing.rst71
-rw-r--r--docs/guides/progressivevpp/settingupenvironment.rst21
-rw-r--r--docs/guides/progressivevpp/sourceNAT.rst159
-rw-r--r--docs/guides/progressivevpp/switching.rst188
-rw-r--r--docs/guides/progressivevpp/traces.rst499
-rw-r--r--docs/guides/progressivevpp/twovppinstances.rst114
9 files changed, 0 insertions, 1372 deletions
diff --git a/docs/guides/progressivevpp/index.rst b/docs/guides/progressivevpp/index.rst
deleted file mode 100644
index 8be904dc911..00000000000
--- a/docs/guides/progressivevpp/index.rst
+++ /dev/null
@@ -1,176 +0,0 @@
-.. _progressivevpp:
-
-.. toctree::
-
-########################
-Progressive VPP Tutorial
-########################
-
-Overview
-========
-
-Learn to run FD.io VPP on a single Ubuntu 16.04 VM using Vagrant with this walkthrough
-covering basic FD.io VPP senarios. Useful FD.io VPP commands will be used, and
-will discuss basic operations, and the state of a running FD.io VPP on a system.
-
-.. note::
-
- This is *not* intended to be a 'How to Run in a Production Environment' set of instructions.
-
-.. _introduction-to-vpp-vagrant:
-
-Setting up your environment
-===========================
-
-All of these exercises are designed to be performed on an Ubuntu 16.04 (Xenial) box.
-
-* If you have an Ubuntu 16.04 box on which you have sudo or root access, you can feel free to use that.
-* If you do not, a Vagrantfile is provided to setup a basic Ubuntu 16.04 box for you in the the steps below.
-
-Running Vagrant
-===============
-
-FD.io VPP runs in userspace. In a production environment you will often run it with DPDK to connect to real NICs or vhost to connect to VMs.
-In those circumstances you usually run a single instance of FD.io VPP.
-
-For purposes of this tutorial, it is going to be extremely useful to run multiple instances of vpp, and connect them to each other to form
-a topology. Fortunately, FD.io VPP supports this.
-
-When running multiple FD.io VPP instances, each instance needs to have specified a 'name' or 'prefix'. In the example below, the 'name' or 'prefix' is "vpp1". Note that only one instance can use the dpdk plugin, since this plugin is trying to acquire a lock on a file.
-
-.. toctree::
-
- settingupenvironment.rst
-
-The DPDK Plugin will be disabled for this section. The link below demonstrates how this is done.
-
-.. toctree::
-
- removedpdkplugin.rst
-
-Start a FD.io VPP shell using vppctl
-====================================
-
-The command *$ sudo vppctl* will launch a FD.io VPP shell with which you can run multiple FD.io VPP commands interactively by running:
-
-.. code-block:: console
-
- $ sudo vppctl
- _______ _ _ _____ ___
- __/ __/ _ \ (_)__ | | / / _ \/ _ \
- _/ _// // / / / _ \ | |/ / ___/ ___/
- /_/ /____(_)_/\___/ |___/_/ /_/
- vpp# show ver
- vpp v18.07-release built by root on c469eba2a593 at Mon Jul 30 23:27:03 UTC 2018
-
-Create an Interface
-===================
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Create a veth interface in Linux host
-#. Assign an IP address to one end of the veth interface in the Linux host
-#. Create a vpp host-interface that connected to one end of a veth interface via AF_PACKET
-#. Add an ip address to a vpp interface
-
-.. toctree::
-
- interface.rst
-
-Traces
-======
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Setup a 'trace'
-#. View a 'trace'
-#. Clear a 'trace'
-#. Verify using ping from host
-#. Ping from vpp
-#. Examine Arp Table
-#. Examine ip fib
-
-.. toctree::
-
- traces.rst
-
-Routing
-=======
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-In this exercise you will learn these new skills:
-
-#. Add route to Linux Host routing table
-#. Add route to FD.io VPP routing table
-
-And revisit the old ones:
-
-#. Examine FD.io VPP routing table
-#. Enable trace on vpp1 and vpp2
-#. ping from host to FD.io VPP
-#. Examine and clear trace on vpp1 and vpp2
-#. ping from FD.io VPP to host
-#. Examine and clear trace on vpp1 and vpp2
-
-
-.. toctree::
-
- routing.rst
-
-Connecting Two FD.io VPP Instances
-==================================
-
-memif is a very high performance, direct memory interface type which can
-be used between FD.io VPP instances to form a topology. It uses a file socket
-for a control channel to set up that shared memory.
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-You will learn the following new skill in this exercise:
-
-#. Create a memif interface between two FD.io VPP instances
-
-You should be able to perform this exercise with the following skills
-learned in previous exercises:
-
-#. Run a second FD.io VPP instance
-#. Add an ip address to a FD.io VPP interface
-#. Ping from FD.io VPP
-
-.. toctree::
-
- twovppinstances.rst
-
-Switching
-=========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Associate an interface with a bridge domain
-#. Create a loopback interaface
-#. Create a BVI (Bridge Virtual Interface) for a bridge domain
-#. Examine a bridge domain
-
-.. toctree::
-
- switching.rst
-
-Source NAT
-==========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-#. Abusing networks namespaces for fun and profit
-#. Configuring snat address
-#. Configuring snat inside and outside interfaces
-
-.. toctree::
-
- sourceNAT.rst
diff --git a/docs/guides/progressivevpp/interface.rst b/docs/guides/progressivevpp/interface.rst
deleted file mode 100644
index 619216d5f42..00000000000
--- a/docs/guides/progressivevpp/interface.rst
+++ /dev/null
@@ -1,126 +0,0 @@
-.. _interface:
-
-.. toctree::
-
-Interface
-=========
-
-VPP command learned in this exercise
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#. `create host-interface <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_devices_af_packet.html#clicmd_create_host-interface>`_
-#. `set int state <https://docs.fd.io/vpp/17.04/clicmd_src_vnet.html#clicmd_set_interface_state>`_
-#. `set int ip address <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_ip.html#clicmd_set_interface_ip_address>`_
-#. `show hardware <https://docs.fd.io/vpp/17.04/clicmd_src_vnet.html#clicmd_show_hardware-interfaces>`_
-#. `show int <https://docs.fd.io/vpp/17.04/clicmd_src_vnet.html#clicmd_show_interfaces>`_
-#. `show int addr <https://docs.fd.io/vpp/17.04/clicmd_src_vnet.html#clicmd_show_interfaces>`_
-#. `trace add <https://docs.fd.io/vpp/17.04/clicmd_src_vlib.html#clicmd_trace_add>`_
-#. `clear trace <https://docs.fd.io/vpp/17.04/clicmd_src_vlib.html#clicmd_clear_trace>`_
-#. `ping <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_ip.html#clicmd_ping>`_
-#. `show ip arp <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_ethernet.html#clicmd_show_ip_arp>`_
-#. `show ip fib <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_fib.html#clicmd_show_ip_fib>`_
-
-Topology
-~~~~~~~~
-
-.. figure:: /_images/Create_Interface_Topology.jpg
- :alt: Figure: Create Interface Topology
-
- Figure: Create Interface Topology
-
-Initial State
-~~~~~~~~~~~~~
-
-The initial state here is presumed to be the final state from the
-exercise `VPP Basics <VPP/Progressive_VPP_Tutorial#Exercise:_vpp_basics>`__
-
-Create veth interfaces on host
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In Linux, there is a type of interface call 'veth'. Think of a 'veth'
-interface as being an interface that has two ends to it (rather than
-one).
-
-Create a veth interface with one end named **vpp1out** and the other
-named **vpp1host**
-
-.. code-block:: console
-
- $ sudo ip link add name vpp1out type veth peer name vpp1host
-
-Turn up both ends:
-
-.. code-block:: console
-
- $ sudo ip link set dev vpp1out up
- $ sudo ip link set dev vpp1host up
-
-Assign an IP address
-~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- $ sudo ip addr add 10.10.1.1/24 dev vpp1host
-
-Display the result:
-
-.. code-block:: console
-
- $ sudo ip addr show vpp1host
- 5: vpp1host@vpp1out: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
- link/ether e2:0f:1e:59:ec:f7 brd ff:ff:ff:ff:ff:ff
- inet 10.10.1.1/24 scope global vpp1host
- valid_lft forever preferred_lft forever
- inet6 fe80::e00f:1eff:fe59:ecf7/64 scope link
- valid_lft forever preferred_lft forever
-
-Create vpp host-interface
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Create a host interface attached to **vpp1out**.
-
-.. code-block:: console
-
- vpp# create host-interface name vpp1out
- host-vpp1out
-
-Confirm the interface:
-
-.. code-block:: console
-
- vpp# show hardware
- Name Idx Link Hardware
- host-vpp1out 1 up host-vpp1out
- Ethernet address 02:fe:d9:75:d5:b4
- Linux PACKET socket interface
- local0 0 down local0
- local
-
-Turn up the interface:
-
-.. code-block:: console
-
- vpp# set int state host-vpp1out up
-
-Confirm the interface is up:
-
-.. code-block:: console
-
- vpp# show int
- Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
- host-vpp1out 1 up 9000/0/0/0
- local0 0 down 0/0/0/0
-
-Assign ip address 10.10.1.2/24
-
-.. code-block:: console
-
- vpp# set int ip address host-vpp1out 10.10.1.2/24
-
-Confirm the ip address is assigned:
-
-.. code-block:: console
-
- vpp# show int addr
- host-vpp1out (up):
- L3 10.10.1.2/24
- local0 (dn):
diff --git a/docs/guides/progressivevpp/removedpdkplugin.rst b/docs/guides/progressivevpp/removedpdkplugin.rst
deleted file mode 100644
index b64e1f0d197..00000000000
--- a/docs/guides/progressivevpp/removedpdkplugin.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-.. _removedpdkplugin:
-
-.. toctree::
-
-Removing the DPDK Plugin
-------------------------
-
-For the purposes of this tutorial, the dpdk plugin will be removed.
-To do this edit the *startup.conf* file with the following,
-your *startup.conf* file may already have this line commented, and may just need to
-uncomment it:
-
-.. code-block:: console
-
- plugins
- {
- plugin dpdk_plugin.so { disable }
- } \ No newline at end of file
diff --git a/docs/guides/progressivevpp/routing.rst b/docs/guides/progressivevpp/routing.rst
deleted file mode 100644
index b5766c03865..00000000000
--- a/docs/guides/progressivevpp/routing.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. _routing:
-
-.. toctree::
-
-Routing
-=======
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-In this exercise you will learn these new skills:
-
-#. Add route to Linux Host routing table
-#. Add route to FD.io VPP routing table
-
-And revisit the old ones:
-
-#. Examine FD.io VPP routing table
-#. Enable trace on vpp1 and vpp2
-#. ping from host to FD.io VPP
-#. Examine and clear trace on vpp1 and vpp2
-#. ping from FD.io VPP to host
-#. Examine and clear trace on vpp1 and vpp2
-
-FD.io VPP command learned in this exercise
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. `ip route
- add <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_ip.html#clicmd_ip_route>`__
-
-Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. figure:: /_images/Connecting_two_vpp_instances_with_memif.png
- :alt: Connect two FD.io VPP topology
-
- Connect two FD.io VPP topology
-
-Initial State
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The initial state here is presumed to be the final state from the
-exercise `Connecting two FD.io VPP
-instances <VPP/Progressive_VPP_Tutorial#Connecting_two_vpp_instances>`__
-
-Setup host route
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: console
-
- $ sudo ip route add 10.10.2.0/24 via 10.10.1.2
- $ ip route
- default via 10.0.2.2 dev enp0s3
- 10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.15
- 10.10.1.0/24 dev vpp1host proto kernel scope link src 10.10.1.1
- 10.10.2.0/24 via 10.10.1.2 dev vpp1host
-
-Setup return route on vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: console
-
- vpp# ip route add 10.10.1.0/24 via 10.10.2.1
-
-Ping from host through vpp1 to vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Setup a trace on vpp1 and vpp2
-#. Ping 10.10.2.2 from the host
-#. Examine the trace on vpp1 and vpp2
-#. Clear the trace on vpp1 and vpp2
diff --git a/docs/guides/progressivevpp/settingupenvironment.rst b/docs/guides/progressivevpp/settingupenvironment.rst
deleted file mode 100644
index a1ffc997b02..00000000000
--- a/docs/guides/progressivevpp/settingupenvironment.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-.. _settingupenvironment:
-
-.. toctree::
-
-Setting up FD.io VPP environment with Vagrant
----------------------------------------------
-
-Refer to :ref:`this guide<installingVboxVagrant>` for setting up a Virtual Box with Vagrant
-
-After setting up Vagrant, use these commands on your Vagrant directory to boot the VM:
-
-.. code-block:: console
-
- # vagrant up
-
-.. code-block:: console
-
- # vagrant ssh
-
-Afterwards, configure FD.io VPP on the Vagrant system following the steps on the :ref:`configutil` guide.
-
diff --git a/docs/guides/progressivevpp/sourceNAT.rst b/docs/guides/progressivevpp/sourceNAT.rst
deleted file mode 100644
index f51a4ad9039..00000000000
--- a/docs/guides/progressivevpp/sourceNAT.rst
+++ /dev/null
@@ -1,159 +0,0 @@
-.. _sourceNAT:
-
-.. toctree::
-
-Source NAT
-==========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Abusing networks namespaces for fun and profit
-#. Configuring snat address
-#. Configuring snat inside and outside interfaces
-
-FD.io VPP command learned in this exercise
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. `snat add interface
- address <https://docs.fd.io/vpp/17.04/clicmd_src_plugins_snat.html#clicmd_snat_add_interface_address>`__
-#. `set interface
- snat <https://docs.fd.io/vpp/17.04/clicmd_src_plugins_snat.html#clicmd_set_interface_snat>`__
-
-Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. figure:: /_images/SNAT_Topology.jpg
- :alt: SNAT Topology
-
- SNAT Topology
-
-Initial state
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Unlike previous exercises, for this one you want to start tabula rasa.
-
-Note: You will lose all your existing config in your FD.io VPP instances!
-
-To clear existing config from previous exercises run:
-
-.. code-block:: console
-
- ps -ef | grep vpp | awk '{print $2}'| xargs sudo kill
- $ sudo ip link del dev vpp1host
- $ sudo ip link del dev vpp1vpp2
-
-Install vpp-plugins
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Snat is supported by a plugin, so vpp-plugins need to be installed
-
-.. code-block:: console
-
- $ sudo apt-get install vpp-plugins
-
-Create FD.io VPP instance
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Create one FD.io VPP instance named vpp1.
-
-Confirm snat plugin is present:
-
-.. code-block:: console
-
- vpp# show plugins
- Plugin path is: /usr/lib/vpp_plugins
- Plugins loaded:
- 1.ioam_plugin.so
- 2.ila_plugin.so
- 3.acl_plugin.so
- 4.flowperpkt_plugin.so
- 5.snat_plugin.so
- 6.libsixrd_plugin.so
- 7.lb_plugin.so
-
-Create veth interfaces
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Create a veth interface with one end named vpp1outside and the other
- named vpp1outsidehost
-#. Assign IP address 10.10.1.1/24 to vpp1outsidehost
-#. Create a veth interface with one end named vpp1inside and the other
- named vpp1insidehost
-#. Assign IP address 10.10.2.1/24 to vpp1outsidehost
-
-Because we'd like to be able to route \*via\* our vpp instance to an
-interface on the same host, we are going to put vpp1insidehost into a
-network namespace
-
-Create a new network namespace 'inside'
-
-.. code-block:: console
-
- $ sudo ip netns add inside
-
-Move interface vpp1inside into the 'inside' namespace:
-
-.. code-block:: console
-
- $ sudo ip link set dev vpp1insidehost up netns inside
-
-Assign an ip address to vpp1insidehost
-
-.. code-block:: console
-
- $ sudo ip netns exec inside ip addr add 10.10.2.1/24 dev vpp1insidehost
-
-Create a route inside the netns:
-
-.. code-block:: console
-
- $ sudo ip netns exec inside ip route add 10.10.1.0/24 via 10.10.2.2
-
-Configure vpp outside interface
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Create a vpp host interface connected to vpp1outside
-#. Assign ip address 10.10.1.2/24
-#. Create a vpp host interface connected to vpp1inside
-#. Assign ip address 10.10.2.2/24
-
-Configure snat
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Configure snat to use the address of host-vpp1outside
-
-.. code-block:: console
-
- vpp# snat add interface address host-vpp1outside
-
-Configure snat inside and outside interfaces
-
-.. code-block:: console
-
- vpp# set interface snat in host-vpp1inside out host-vpp1outside
-
-Prepare to Observe Snat
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Observing snat in this configuration is interesting. To do so, vagrant
-ssh a second time into your VM and run:
-
-.. code-block:: console
-
- $ sudo tcpdump -s 0 -i vpp1outsidehost
-
-Also enable tracing on vpp1
-
-Ping via snat
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: console
-
- $ sudo ip netns exec inside ping -c 1 10.10.1.1
-
-Confirm snat
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Examine the tcpdump output and vpp1 trace to confirm snat occurred.
-
diff --git a/docs/guides/progressivevpp/switching.rst b/docs/guides/progressivevpp/switching.rst
deleted file mode 100644
index aede969f42f..00000000000
--- a/docs/guides/progressivevpp/switching.rst
+++ /dev/null
@@ -1,188 +0,0 @@
-.. _switching:
-
-.. toctree::
-
-Switching
-=========
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Associate an interface with a bridge domain
-#. Create a loopback interaface
-#. Create a BVI (Bridge Virtual Interface) for a bridge domain
-#. Examine a bridge domain
-
-FD.io VPP command learned in this exercise
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. `show
- bridge <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_l2.html#clicmd_show_bridge-domain>`__
-#. `show bridge
- detail <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_l2.html#clicmd_show_bridge-domain>`__
-#. `set int l2
- bridge <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_l2.html#clicmd_set_interface_l2_bridge>`__
-#. `show l2fib
- verbose <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_l2.html#clicmd_show_l2fib>`__
-
-Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. figure:: /_images/Switching_Topology.jpg
- :alt: Switching Topology
-
- Switching Topology
-
-Initial state
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Unlike previous exercises, for this one you want to start tabula rasa.
-
-Note: You will lose all your existing config in your FD.io VPP instances!
-
-To clear existing config from previous exercises run:
-
-.. code-block:: console
-
- $ ps -ef | grep vpp | awk '{print $2}'| xargs sudo kill
- $ sudo ip link del dev vpp1host
- $ sudo ip link del dev vpp1vpp2
-
-Run FD.io VPP instances
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Run a vpp instance named **vpp1**
-#. Run a vpp instance named **vpp2**
-
-Connect vpp1 to host
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Create a veth with one end named vpp1host and the other named
- vpp1out.
-#. Connect vpp1out to vpp1
-#. Add ip address 10.10.1.1/24 on vpp1host
-
-Connect vpp1 to vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Create a veth with one end named vpp1vpp2 and the other named
- vpp2vpp1.
-#. Connect vpp1vpp2 to vpp1.
-#. Connect vpp2vpp1 to vpp2.
-
-Configure Bridge Domain on vpp1
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Check to see what bridge domains already exist, and select the first
-bridge domain number not in use:
-
-.. code-block:: console
-
- vpp# show bridge-domain
- ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
- 0 0 off off off off off local0
-
-In the example above, there is bridge domain ID '0' already. Even though
-sometimes we might get feedback as below:
-
-.. code-block:: console
-
- no bridge-domains in use
-
-the bridge domain ID '0' still exists, where no operations are
-supported. For instance, if we try to add host-vpp1out and host-vpp1vpp2
-to bridge domain ID 0, we will get nothing setup.
-
-.. code-block:: console
-
- vpp# set int l2 bridge host-vpp1out 0
- vpp# set int l2 bridge host-vpp1vpp2 0
- vpp# show bridge-domain 0 detail
- show bridge-domain: No operations on the default bridge domain are supported
-
-So we will create bridge domain 1 instead of playing with the default
-bridge domain ID 0.
-
-Add host-vpp1out to bridge domain ID 1
-
-.. code-block:: console
-
- vpp# set int l2 bridge host-vpp1out 1
-
-Add host-vpp1vpp2 to bridge domain ID1
-
-.. code-block:: console
-
- vpp# set int l2 bridge host-vpp1vpp2 1
-
-Examine bridge domain 1:
-
-.. code-block:: console
-
- vpp# show bridge-domain 1 detail
- BD-ID Index BSN Age(min) Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
- 1 1 0 off on on on on off N/A
-
- Interface If-idx ISN SHG BVI TxFlood VLAN-Tag-Rewrite
- host-vpp1out 1 1 0 - * none
- host-vpp1vpp2 2 1 0 - * none
-
-Configure loopback interface on vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: console
-
- vpp# create loopback interface
- loop0
-
-Add the ip address 10.10.1.2/24 to vpp2 interface loop0. Set the state
-of interface loop0 on vpp2 to 'up'
-
-Configure bridge domain on vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Check to see the first available bridge domain ID (it will be 1 in this
-case)
-
-Add interface loop0 as a bridge virtual interface (bvi) to bridge domain
-1
-
-.. code-block:: console
-
- vpp# set int l2 bridge loop0 1 bvi
-
-Add interface vpp2vpp1 to bridge domain 1
-
-.. code-block:: console
-
- vpp# set int l2 bridge host-vpp2vpp1 1
-
-Examine the bridge domain and interfaces.
-
-Ping from host to vpp and vpp to host
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. Add trace on vpp1 and vpp2
-#. ping from host to 10.10.1.2
-#. Examine and clear trace on vpp1 and vpp2
-#. ping from vpp2 to 10.10.1.1
-#. Examine and clear trace on vpp1 and vpp2
-
-Examine l2 fib
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: console
-
- vpp# show l2fib verbose
- Mac Address BD Idx Interface Index static filter bvi Mac Age (min)
- de:ad:00:00:00:00 1 host-vpp1vpp2 2 0 0 0 disabled
- c2:f6:88:31:7b:8e 1 host-vpp1out 1 0 0 0 disabled
- 2 l2fib entries
-
-.. code-block:: console
-
- vpp# show l2fib verbose
- Mac Address BD Idx Interface Index static filter bvi Mac Age (min)
- de:ad:00:00:00:00 1 loop0 2 1 0 1 disabled
- c2:f6:88:31:7b:8e 1 host-vpp2vpp1 1 0 0 0 disabled
- 2 l2fib entries
diff --git a/docs/guides/progressivevpp/traces.rst b/docs/guides/progressivevpp/traces.rst
deleted file mode 100644
index 076e2fa57b8..00000000000
--- a/docs/guides/progressivevpp/traces.rst
+++ /dev/null
@@ -1,499 +0,0 @@
-.. _traces:
-
-.. toctree::
-
-Traces
-======
-
-Basic Trace Commands
-~~~~~~~~~~~~~~~~~~~~
-
-Show trace buffer [max COUNT].
-
-.. code-block:: console
-
- vpp# show trace
-
-
-Clear trace buffer and free memory.
-
-.. code-block:: console
-
- vpp# clear trace
-
-filter trace output - include NODE COUNT | exclude NODE COUNT | none.
-
-.. code-block:: console
-
- vpp# trace filter <include NODE COUNT | exclude NODE COUNT | none>
-
-Skills to be Learned
-~~~~~~~~~~~~~~~~~~~~
-
-#. Setup a 'trace'
-#. View a 'trace'
-#. Clear a 'trace'
-#. Verify using ping from host
-#. Ping from vpp
-#. Examine Arp Table
-#. Examine ip fib
-
-Add Trace
-~~~~~~~~~
-
-.. code-block:: console
-
- vpp# trace add af-packet-input 10
-
-Ping from Host to FD.io VPP
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- vpp# q
- $ ping -c 1 10.10.1.2
- PING 10.10.1.2 (10.10.1.2) 56(84) bytes of data.
- 64 bytes from 10.10.1.2: icmp_seq=1 ttl=64 time=0.283 ms
-
- --- 10.10.1.2 ping statistics ---
- 1 packets transmitted, 1 received, 0% packet loss, time 0ms
- rtt min/avg/max/mdev = 0.283/0.283/0.283/0.000 ms
-
-Examine Trace of ping from host to FD.io VPP
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- # vppctl
- vpp# show trace
- ------------------- Start of thread 0 vpp_main -------------------
- Packet 1
-
- 00:17:04:099260: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e370 nsec 0x3af2736f vlan 0 vlan_tpid 0
- 00:17:04:099269: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:17:04:099285: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099290: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099296: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099300: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099301: ip4-icmp-echo-request
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099303: ip4-load-balance
- fib 0 dpo-idx 13 flow hash: 0x00000000
- ICMP: 10.10.1.2 -> 10.10.1.1
- tos 0x00, ttl 64, length 84, checksum 0x4437
- fragment id 0xe05b, flags DONT_FRAGMENT
- ICMP echo_reply checksum 0xc843
- 00:17:04:099305: ip4-rewrite
- tx_sw_if_index 1 dpo-idx 1 : ipv4 via 10.10.1.1 host-vpp1out: mtu:9000 e20f1e59ecf702fed975d5b40800 flow hash: 0x00000000
- 00000000: e20f1e59ecf702fed975d5b4080045000054e05b4000400144370a0a01020a0a
- 00000020: 01010000c8437c92000170e3605b000000001c170f00000000001011
- 00:17:04:099307: host-vpp1out-output
- host-vpp1out
- IP4: 02:fe:d9:75:d5:b4 -> e2:0f:1e:59:ec:f7
- ICMP: 10.10.1.2 -> 10.10.1.1
- tos 0x00, ttl 64, length 84, checksum 0x4437
- fragment id 0xe05b, flags DONT_FRAGMENT
- ICMP echo_reply checksum 0xc843
-
-Clear trace buffer
-~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- vpp# clear trace
-
-Ping from FD.io VPP to Host
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- vpp# ping 10.10.1.1
- 64 bytes from 10.10.1.1: icmp_seq=1 ttl=64 time=.0789 ms
- 64 bytes from 10.10.1.1: icmp_seq=2 ttl=64 time=.0619 ms
- 64 bytes from 10.10.1.1: icmp_seq=3 ttl=64 time=.0519 ms
- 64 bytes from 10.10.1.1: icmp_seq=4 ttl=64 time=.0514 ms
- 64 bytes from 10.10.1.1: icmp_seq=5 ttl=64 time=.0526 ms
-
- Statistics: 5 sent, 5 received, 0% packet loss
-
-Examine Trace of ping from FD.io VPP to host
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The output will demonstrate FD.io VPP's trace of ping for all packets.
-
-.. code-block:: console
-
- vpp# show trace
- ------------------- Start of thread 0 vpp_main -------------------
- Packet 1
-
- 00:17:04:099260: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e370 nsec 0x3af2736f vlan 0 vlan_tpid 0
- 00:17:04:099269: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:17:04:099285: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099290: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099296: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099300: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099301: ip4-icmp-echo-request
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f7c
- fragment id 0xe516, flags DONT_FRAGMENT
- ICMP echo_request checksum 0xc043
- 00:17:04:099303: ip4-load-balance
- fib 0 dpo-idx 13 flow hash: 0x00000000
- ICMP: 10.10.1.2 -> 10.10.1.1
- tos 0x00, ttl 64, length 84, checksum 0x4437
- fragment id 0xe05b, flags DONT_FRAGMENT
- ICMP echo_reply checksum 0xc843
- 00:17:04:099305: ip4-rewrite
- tx_sw_if_index 1 dpo-idx 1 : ipv4 via 10.10.1.1 host-vpp1out: mtu:9000 e20f1e59ecf702fed975d5b40800 flow hash: 0x00000000
- 00000000: e20f1e59ecf702fed975d5b4080045000054e05b4000400144370a0a01020a0a
- 00000020: 01010000c8437c92000170e3605b000000001c170f00000000001011
- 00:17:04:099307: host-vpp1out-output
- host-vpp1out
- IP4: 02:fe:d9:75:d5:b4 -> e2:0f:1e:59:ec:f7
- ICMP: 10.10.1.2 -> 10.10.1.1
- tos 0x00, ttl 64, length 84, checksum 0x4437
- fragment id 0xe05b, flags DONT_FRAGMENT
- ICMP echo_reply checksum 0xc843
-
- Packet 2
-
- 00:17:09:113964: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 42 snaplen 42 mac 66 net 80
- sec 0x5b60e375 nsec 0x3b3bd57d vlan 0 vlan_tpid 0
- 00:17:09:113974: ethernet-input
- ARP: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:17:09:113986: arp-input
- request, type ethernet/IP4, address size 6/4
- e2:0f:1e:59:ec:f7/10.10.1.1 -> 00:00:00:00:00:00/10.10.1.2
- 00:17:09:114003: host-vpp1out-output
- host-vpp1out
- ARP: 02:fe:d9:75:d5:b4 -> e2:0f:1e:59:ec:f7
- reply, type ethernet/IP4, address size 6/4
- 02:fe:d9:75:d5:b4/10.10.1.2 -> e2:0f:1e:59:ec:f7/10.10.1.1
-
- Packet 3
-
- 00:18:16:407079: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e3b9 nsec 0x90b7566 vlan 0 vlan_tpid 0
- 00:18:16:407085: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:16:407090: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3fe8
- fragment id 0x24ab
- ICMP echo_reply checksum 0x37eb
- 00:18:16:407094: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3fe8
- fragment id 0x24ab
- ICMP echo_reply checksum 0x37eb
- 00:18:16:407097: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3fe8
- fragment id 0x24ab
- ICMP echo_reply checksum 0x37eb
- 00:18:16:407101: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3fe8
- fragment id 0x24ab
- ICMP echo_reply checksum 0x37eb
- 00:18:16:407104: ip4-icmp-echo-reply
- ICMP echo id 7531 seq 1
- 00:18:16:407108: ip4-drop
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3fe8
- fragment id 0x24ab
- ICMP echo_reply checksum 0x37eb
- 00:18:16:407111: error-drop
- ip4-icmp-input: unknown type
-
- Packet 4
-
- 00:18:17:409084: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e3ba nsec 0x90b539f vlan 0 vlan_tpid 0
- 00:18:17:409088: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:17:409092: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f40
- fragment id 0x2553
- ICMP echo_reply checksum 0xcc6d
- 00:18:17:409095: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f40
- fragment id 0x2553
- ICMP echo_reply checksum 0xcc6d
- 00:18:17:409097: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f40
- fragment id 0x2553
- ICMP echo_reply checksum 0xcc6d
- 00:18:17:409099: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f40
- fragment id 0x2553
- ICMP echo_reply checksum 0xcc6d
- 00:18:17:409101: ip4-icmp-echo-reply
- ICMP echo id 7531 seq 2
- 00:18:17:409104: ip4-drop
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3f40
- fragment id 0x2553
- ICMP echo_reply checksum 0xcc6d
- 00:18:17:409104: error-drop
- ip4-icmp-input: unknown type
-
- Packet 5
-
- 00:18:18:409082: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e3bb nsec 0x8ecad24 vlan 0 vlan_tpid 0
- 00:18:18:409087: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:18:409091: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e66
- fragment id 0x262d
- ICMP echo_reply checksum 0x8e59
- 00:18:18:409093: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e66
- fragment id 0x262d
- ICMP echo_reply checksum 0x8e59
- 00:18:18:409096: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e66
- fragment id 0x262d
- ICMP echo_reply checksum 0x8e59
- 00:18:18:409098: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e66
- fragment id 0x262d
- ICMP echo_reply checksum 0x8e59
- 00:18:18:409099: ip4-icmp-echo-reply
- ICMP echo id 7531 seq 3
- 00:18:18:409102: ip4-drop
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e66
- fragment id 0x262d
- ICMP echo_reply checksum 0x8e59
- 00:18:18:409102: error-drop
- ip4-icmp-input: unknown type
-
- Packet 6
-
- 00:18:19:414750: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e3bc nsec 0x92450f2 vlan 0 vlan_tpid 0
- 00:18:19:414754: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:19:414757: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e52
- fragment id 0x2641
- ICMP echo_reply checksum 0x9888
- 00:18:19:414760: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e52
- fragment id 0x2641
- ICMP echo_reply checksum 0x9888
- 00:18:19:414762: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e52
- fragment id 0x2641
- ICMP echo_reply checksum 0x9888
- 00:18:19:414764: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e52
- fragment id 0x2641
- ICMP echo_reply checksum 0x9888
- 00:18:19:414765: ip4-icmp-echo-reply
- ICMP echo id 7531 seq 4
- 00:18:19:414768: ip4-drop
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e52
- fragment id 0x2641
- ICMP echo_reply checksum 0x9888
- 00:18:19:414769: error-drop
- ip4-icmp-input: unknown type
-
- Packet 7
-
- 00:18:20:418038: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 98 snaplen 98 mac 66 net 80
- sec 0x5b60e3bd nsec 0x937bcc2 vlan 0 vlan_tpid 0
- 00:18:20:418042: ethernet-input
- IP4: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:20:418045: ip4-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e47
- fragment id 0x264c
- ICMP echo_reply checksum 0xc0e8
- 00:18:20:418048: ip4-lookup
- fib 0 dpo-idx 5 flow hash: 0x00000000
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e47
- fragment id 0x264c
- ICMP echo_reply checksum 0xc0e8
- 00:18:20:418049: ip4-local
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e47
- fragment id 0x264c
- ICMP echo_reply checksum 0xc0e8
- 00:18:20:418054: ip4-icmp-input
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e47
- fragment id 0x264c
- ICMP echo_reply checksum 0xc0e8
- 00:18:20:418054: ip4-icmp-echo-reply
- ICMP echo id 7531 seq 5
- 00:18:20:418057: ip4-drop
- ICMP: 10.10.1.1 -> 10.10.1.2
- tos 0x00, ttl 64, length 84, checksum 0x3e47
- fragment id 0x264c
- ICMP echo_reply checksum 0xc0e8
- 00:18:20:418058: error-drop
- ip4-icmp-input: unknown type
-
- Packet 8
-
- 00:18:21:419208: af-packet-input
- af_packet: hw_if_index 1 next-index 4
- tpacket2_hdr:
- status 0x20000001 len 42 snaplen 42 mac 66 net 80
- sec 0x5b60e3be nsec 0x92a9429 vlan 0 vlan_tpid 0
- 00:18:21:419876: ethernet-input
- ARP: e2:0f:1e:59:ec:f7 -> 02:fe:d9:75:d5:b4
- 00:18:21:419881: arp-input
- request, type ethernet/IP4, address size 6/4
- e2:0f:1e:59:ec:f7/10.10.1.1 -> 00:00:00:00:00:00/10.10.1.2
- 00:18:21:419896: host-vpp1out-output
- host-vpp1out
- ARP: 02:fe:d9:75:d5:b4 -> e2:0f:1e:59:ec:f7
- reply, type ethernet/IP4, address size 6/4
- 02:fe:d9:75:d5:b4/10.10.1.2 -> e2:0f:1e:59:ec:f7/10.10.1.1
-
-After examining the trace, clear it again using vpp# clear trace.
-
-Examine arp tables
-~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- vpp# show ip arp
- Time IP4 Flags Ethernet Interface
- 1101.5636 10.10.1.1 D e2:0f:1e:59:ec:f7 host-vpp1out
-
-Examine routing tables
-~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- vpp# show ip fib
- ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:adjacency:1, src:default-route:1, ]
- 0.0.0.0/0
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:1 buckets:1 uRPF:0 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 0.0.0.0/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:2 buckets:1 uRPF:1 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 10.10.1.0/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:10 buckets:1 uRPF:9 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 10.10.1.1/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[5:420] via:[2:168]]
- [0] [@5]: ipv4 via 10.10.1.1 host-vpp1out: mtu:9000 e20f1e59ecf702fed975d5b40800
- 10.10.1.0/24
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:9 buckets:1 uRPF:8 to:[0:0]]
- [0] [@4]: ipv4-glean: host-vpp1out: mtu:9000 ffffffffffff02fed975d5b40806
- 10.10.1.2/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:12 buckets:1 uRPF:13 to:[7:588]]
- [0] [@2]: dpo-receive: 10.10.1.2 on host-vpp1out
- 10.10.1.255/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:11 buckets:1 uRPF:11 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 224.0.0.0/4
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:4 buckets:1 uRPF:3 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 240.0.0.0/4
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:3 buckets:1 uRPF:2 to:[0:0]]
- [0] [@0]: dpo-drop ip4
- 255.255.255.255/32
- unicast-ip4-chain
- [@0]: dpo-load-balance: [proto:ip4 index:5 buckets:1 uRPF:4 to:[0:0]]
- [0] [@0]: dpo-drop ip4
diff --git a/docs/guides/progressivevpp/twovppinstances.rst b/docs/guides/progressivevpp/twovppinstances.rst
deleted file mode 100644
index 13447b5ea8b..00000000000
--- a/docs/guides/progressivevpp/twovppinstances.rst
+++ /dev/null
@@ -1,114 +0,0 @@
-.. _twovppinstances:
-
-.. toctree::
-
-Connecting two FD.io VPP Instances
-----------------------------------
-
-.. _background-1:
-
-memif is a very high performance, direct memory interface type which can
-be used between FD.io VPP instances to form a topology. It uses a file socket
-for a control channel to set up that shared memory.
-
-.. _skills-to-be-learned-1:
-
-Skills to be Learned
-^^^^^^^^^^^^^^^^^^^^
-
-You will learn the following new skill in this exercise:
-
-#. Create a memif interface between two FD.io VPP instances
-
-You should be able to perform this exercise with the following skills
-learned in previous exercises:
-
-#. Run a second FD.io VPP instance
-#. Add an ip address to a FD.io VPP interface
-#. Ping from FD.io VPP
-
-.. _topology-1:
-
-Topology
-^^^^^^^^
-
-.. figure:: /_images/Connecting_two_vpp_instances_with_memif.png
- :alt: Connect two FD.io VPP topology
-
- Connect two FD.io VPP topology
-
-.. _initial-state-1:
-
-Initial state
-^^^^^^^^^^^^^
-
-The initial state here is presumed to be the final state from the
-exercise `Create an
-Interface <VPP/Progressive_VPP_Tutorial#Exercise:_Create_an_Interface>`__
-
-.. _action-running-a-second-vpp-instances-1:
-
-Running a second FD.io VPP instances
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-You should already have a FD.io VPP instance running named: vpp1.
-
-Run a second FD.io VPP instance named: vpp2.
-
-.. _action-create-memif-interface-on-vpp1-1:
-
-Create memif interface on vpp1
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Create a memif interface on vpp1:
-
-.. code-block:: console
-
- vpp# create interface memif id 0 master
-
-This will create an interface on vpp1 memif0/0 using /run/vpp/memif as
-its socket file. The role of vpp1 for this memif inteface is 'master'.
-
-Use your previously used skills to:
-
-#. Set the memif0/0 state to up.
-#. Assign IP address 10.10.2.1/24 to memif0/0
-#. Examine memif0/0 via show commands
-
-.. _action-create-memif-interface-on-vpp2-1:
-
-Create memif interface on vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-We want vpp2 to pick up the 'slave' role using the same
-run/vpp/memif-vpp1vpp2 socket file
-
-.. code-block:: console
-
- vpp# create interface memif id 0 slave
-
-This will create an interface on vpp2 memif0/0 using /run/vpp/memif as
-its socket file. The role of vpp1 for this memif inteface is 'slave'.
-
-Use your previously used skills to:
-
-#. Set the memif0/0 state to up.
-#. Assign IP address 10.10.2.2/24 to memif0/0
-#. Examine memif0/0 via show commands
-
-.. _action-ping-from-vpp1-to-vpp2-1:
-
-Ping from vpp1 to vpp2
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Ping 10.10.2.2 from vpp1
-
-.. code-block:: console
-
- $ ping 10.10.2.2
-
-Ping 10.10.2.1 from vpp2
-
-.. code-block:: console
-
- $ ping 10.10.2.1 \ No newline at end of file