aboutsummaryrefslogtreecommitdiffstats
path: root/docs/reference/cmdreference
diff options
context:
space:
mode:
Diffstat (limited to 'docs/reference/cmdreference')
-rw-r--r--docs/reference/cmdreference/index.rst55
-rw-r--r--docs/reference/cmdreference/interface/hardware.rst109
-rw-r--r--docs/reference/cmdreference/interface/index.rst10
-rw-r--r--docs/reference/cmdreference/interface/interface.rst165
-rw-r--r--docs/reference/cmdreference/interface/subinterface.rst117
-rw-r--r--docs/reference/cmdreference/vhost/index.rst8
-rw-r--r--docs/reference/cmdreference/vhost/vhostuser.rst269
7 files changed, 733 insertions, 0 deletions
diff --git a/docs/reference/cmdreference/index.rst b/docs/reference/cmdreference/index.rst
new file mode 100644
index 00000000000..5c8effa3310
--- /dev/null
+++ b/docs/reference/cmdreference/index.rst
@@ -0,0 +1,55 @@
+.. _cmdreference:
+
+Command Line Reference
+======================
+
+This is a reference guide for the vpp debug commands that are referenced in the within these documents. This is **NOT** a complete list. For a complete list refer to the Debug CLI section of the
+`Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_.
+
+The debug CLI can be executed from a su shell using the vppctl command.
+
+.. code-block:: console
+
+ # sudo bash
+ # vppctl show interface
+ Name Idx State Counter Count
+ TenGigabitEthernet86/0/0 1 up rx packets 6569213
+ rx bytes 9928352943
+ tx packets 50384
+ tx bytes 3329279
+ TenGigabitEthernet86/0/1 2 down
+ VirtualEthernet0/0/0 3 up rx packets 50384
+ rx bytes 3329279
+ tx packets 6569213
+ tx bytes 9928352943
+ drops 1498
+ local0 0 down
+
+Commands can also be executed from the vppct shell.
+
+.. code-block:: console
+
+ # vppctl
+ _______ _ _ _____ ___
+ __/ __/ _ \ (_)__ | | / / _ \/ _ \
+ _/ _// // / / / _ \ | |/ / ___/ ___/
+ /_/ /____(_)_/\___/ |___/_/ /_/
+
+ vpp# show interface
+ Name Idx State Counter Count
+ TenGigabitEthernet86/0/0 1 up rx packets 6569213
+ rx bytes 9928352943
+ tx packets 50384
+ tx bytes 3329279
+ TenGigabitEthernet86/0/1 2 down
+ VirtualEthernet0/0/0 3 up rx packets 50384
+ rx bytes 3329279
+ tx packets 6569213
+ tx bytes 9928352943
+ drops 1498
+ local0 0 down
+
+.. toctree::
+
+ interface/index.rst
+ vhost/index.rst
diff --git a/docs/reference/cmdreference/interface/hardware.rst b/docs/reference/cmdreference/interface/hardware.rst
new file mode 100644
index 00000000000..f4d334fd935
--- /dev/null
+++ b/docs/reference/cmdreference/interface/hardware.rst
@@ -0,0 +1,109 @@
+.. _hardwarecommands:
+
+.. toctree::
+
+Show Hardware-Interfaces
+========================
+Display more detailed information about all or a list of given
+interfaces. The verboseness of the output can be controlled by the
+following optional parameters:
+
+- brief: Only show name, index and state (default for bonded
+ interfaces).
+- verbose: Also display additional attributes (default for all other
+ interfaces).
+- detail: Also display all remaining attributes and extended
+ statistics.
+
+**To limit the output of the command to bonded interfaces and their
+slave interfaces, use the '*bond*' optional parameter.**
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ show hardware-interfaces [brief|verbose|detail] [bond] [<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]].
+
+Examples
+--------
+Example of how to display default data for all interfaces:
+
+.. code-block:: console
+
+ vpp# show hardware-interfaces
+ Name Idx Link Hardware
+ GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
+ Ethernet address ec:f4:bb:c0:bc:fc
+ Intel e1000
+ carrier up full duplex speed 1000 mtu 9216
+ rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
+ cpu socket 0
+ GigabitEthernet7/0/1 2 up GigabitEthernet7/0/1
+ Ethernet address ec:f4:bb:c0:bc:fd
+ Intel e1000
+ carrier up full duplex speed 1000 mtu 9216
+ rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
+ cpu socket 0
+ VirtualEthernet0/0/0 3 up VirtualEthernet0/0/0
+ Ethernet address 02:fe:a5:a9:8b:8e
+ VirtualEthernet0/0/1 4 up VirtualEthernet0/0/1
+ Ethernet address 02:fe:c0:4e:3b:b0
+ VirtualEthernet0/0/2 5 up VirtualEthernet0/0/2
+ Ethernet address 02:fe:1f:73:92:81
+ VirtualEthernet0/0/3 6 up VirtualEthernet0/0/3
+ Ethernet address 02:fe:f2:25:c4:68
+ local0 0 down local0
+ local
+
+Example of how to display '*verbose*' data for an interface by name and software index (where 2 is the software index):
+
+.. code-block:: console
+
+ vpp# show hardware-interfaces GigabitEthernet7/0/0 2 verbose
+ Name Idx Link Hardware
+ GigabitEthernet7/0/0 1 up GigabitEthernet7/0/0
+ Ethernet address ec:f4:bb:c0:bc:fc
+ Intel e1000
+ carrier up full duplex speed 1000 mtu 9216
+ rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
+ cpu socket 0
+ GigabitEthernet7/0/1 2 down GigabitEthernet7/0/1
+ Ethernet address ec:f4:bb:c0:bc:fd
+ Intel e1000
+ carrier up full duplex speed 1000 mtu 9216
+ rx queues 1, rx desc 1024, tx queues 3, tx desc 1024
+ cpu socket 0
+
+Clear Hardware-Interfaces
+=========================
+
+Clear the extended statistics for all or a list of given interfaces
+(statistics associated with the '*show hardware-interfaces*' command).
+
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ clear hardware-interfaces [<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]].
+
+
+Examples
+--------
+
+Example of how to clear the extended statistics for all interfaces:
+
+
+.. code-block:: console
+
+ vpp# clear hardware-interfaces
+
+Example of how to clear the extended statistics for an interface by name and software index (where 2 is the software index):
+
+.. code-block:: console
+
+ vpp# clear hardware-interfaces GigabitEthernet7/0/0 2
+
+
diff --git a/docs/reference/cmdreference/interface/index.rst b/docs/reference/cmdreference/interface/index.rst
new file mode 100644
index 00000000000..db4aa44bba2
--- /dev/null
+++ b/docs/reference/cmdreference/interface/index.rst
@@ -0,0 +1,10 @@
+.. _interfacecommands:
+
+Interface Commands
+==================
+
+.. toctree::
+
+ hardware
+ interface
+ subinterface
diff --git a/docs/reference/cmdreference/interface/interface.rst b/docs/reference/cmdreference/interface/interface.rst
new file mode 100644
index 00000000000..a3429037e8b
--- /dev/null
+++ b/docs/reference/cmdreference/interface/interface.rst
@@ -0,0 +1,165 @@
+.. _intcommands:
+
+Interface Commands
+==================
+
+.. toctree::
+
+.. _showintcommand:
+
+Show Interface
+==============
+Shows software interface information including counters and features
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ show interface [address|addr|features|feat] [<interface> [<interface> [..]]]
+
+Examples
+--------
+
+Example of how to show the interface counters:
+
+.. code-block:: console
+
+ vpp# show int
+ Name Idx State Counter Count
+ TenGigabitEthernet86/0/0 1 up rx packets 6569213
+ rx bytes 9928352943
+ tx packets 50384
+ tx bytes 3329279
+ TenGigabitEthernet86/0/1 2 down
+ VirtualEthernet0/0/0 3 up rx packets 50384
+ rx bytes 3329279
+ tx packets 6569213
+ tx bytes 9928352943
+ drops 1498
+ local0 0 down
+
+Example of how to display the interface placement:
+
+.. code-block:: console
+
+ vpp# show interface rx-placement
+ Thread 1 (vpp_wk_0):
+ node dpdk-input:
+ GigabitEthernet7/0/0 queue 0 (polling)
+ node vhost-user-input:
+ VirtualEthernet0/0/12 queue 0 (polling)
+ VirtualEthernet0/0/12 queue 2 (polling)
+ VirtualEthernet0/0/13 queue 0 (polling)
+ VirtualEthernet0/0/13 queue 2 (polling)
+ Thread 2 (vpp_wk_1):
+ node dpdk-input:
+ GigabitEthernet7/0/1 queue 0 (polling)
+ node vhost-user-input:
+ VirtualEthernet0/0/12 queue 1 (polling)
+ VirtualEthernet0/0/12 queue 3 (polling)
+ VirtualEthernet0/0/13 queue 1 (polling)
+ VirtualEthernet0/0/13 queue 3 (polling)
+
+Clear Interfaces
+================
+Clear the statistics for all interfaces (statistics associated with the
+'*show interface*' command).
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ clear interfaces
+
+Example
+-------
+Example of how to clear the statistics for all interfaces:
+
+.. code-block:: console
+
+ vpp# clear interfaces
+
+Set Interface Mac Address
+=========================
+The '*set interface mac address* ' command allows to set MAC address of
+given interface. In case of NIC interfaces the one has to support MAC
+address change. A side effect of MAC address change are changes of MAC
+addresses in FIB tables (ipv4 and ipv6).
+
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface mac address <interface> <mac-address>.
+
+Examples
+--------
+
+Examples of how to change MAC Address of interface:
+
+.. code-block:: console
+
+ vpp# set interface mac address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01
+ vpp# set interface mac address host-vpp0 aa:bb:cc:dd:ee:02
+ vpp# set interface mac address tap-0 aa:bb:cc:dd:ee:03
+ vpp# set interface mac address pg0 aa:bb:cc:dd:ee:04
+
+Set Interface Mtu
+=================
+
+.. toctree::
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface mtu [packet|ip4|ip6|mpls] <value> <interface>.
+
+Set Interface Promiscuous
+=========================
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface promiscuous [on|off] <interface>.
+
+.. _setintstate:
+
+Set Interface State
+===================
+This command is used to change the admin state (up/down) of an
+interface.
+
+If an interface is down, the optional '*punt*' flag can also be set. The
+'*punt*' flag implies the interface is disabled for forwarding but punt
+all traffic to slow-path. Use the '*enable*' flag to clear '*punt*' flag
+(interface is still down).
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface state <interface> [up|down|punt|enable].
+
+Examples
+--------
+
+Example of how to configure the admin state of an interface to **up**:
+
+.. code-block:: console
+
+ vpp# set interface state GigabitEthernet2/0/0 up
+
+Example of how to configure the admin state of an interface to **down**:
+
+.. code-block:: console
+
+ vpp# set interface state GigabitEthernet2/0/0 down
diff --git a/docs/reference/cmdreference/interface/subinterface.rst b/docs/reference/cmdreference/interface/subinterface.rst
new file mode 100644
index 00000000000..24519bc1a26
--- /dev/null
+++ b/docs/reference/cmdreference/interface/subinterface.rst
@@ -0,0 +1,117 @@
+.. _subinterfacecommands:
+
+.. toctree::
+
+Create Sub-Interfaces
+=====================
+This command is used to add VLAN IDs to interfaces, also known as
+subinterfaces. The primary input to this command is the '*interface*'
+and '*subId*' (subinterface Id) parameters. If no additional VLAN ID is
+provide, the VLAN ID is assumed to be the '*subId*'. The VLAN ID and
+'*subId*' can be different, but this is not recommended.
+
+This command has several variations:
+
+- **create sub-interfaces <interface> <subId>** - Create a subinterface
+ to process packets with a given 802.1q VLAN ID (same value as the
+ '*subId*').
+- **create sub-interfaces <interface> <subId> default** - Adding the
+ '*default*' parameter indicates that packets with VLAN IDs that do
+ not match any other subinterfaces should be sent to this
+ subinterface.
+- **create sub-interfaces <interface> <subId> untagged** - Adding the
+ '*untagged*' parameter indicates that packets no VLAN IDs should be
+ sent to this subinterface.
+- **create sub-interfaces <interface> <subId>-<subId>** - Create a
+ range of subinterfaces to handle a range of VLAN IDs.
+- **create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any
+ [exact-match]** - Use this command to specify the outer VLAN ID, to
+ either be explicited or to make the VLAN ID different from the
+ '*subId*'.
+- **create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any
+ inner-dot1q <vlanId>|any [exact-match]** - Use this command to
+ specify the outer VLAN ID and the innner VLAN ID.
+
+When '*dot1q*' or '*dot1ad*' is explictly entered, subinterfaces can be
+configured as either exact-match or non-exact match. Non-exact match is
+the CLI default. If '*exact-match*' is specified, packets must have the
+same number of VLAN tags as the configuration. For non-exact-match,
+packets must at least that number of tags. L3 (routed) interfaces must
+be configured as exact-match. L2 interfaces are typically configured as
+non-exact-match. If '*dot1q*' or '*dot1ad*' is NOT entered, then the
+default behavior is exact-match.
+
+Use the '*show interface*' command to display all subinterfaces.
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ create sub-interfaces <interface> {<subId> [default|untagged]} | {<subId>-<subId>} | {<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}.
+
+Examples
+--------
+
+Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11
+
+The previous example is shorthand and is equivalent to:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match
+
+Example of how to create a subinterface number that is different from the VLAN ID:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100
+
+Examples of how to create q-in-q and q-in-any subinterfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any
+
+Examples of how to create dot1ad interfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200
+
+Examples of '*exact-match*' versus non-exact match. A packet with outer VLAN 100 and inner VLAN 200 would match this interface, because the default is non-exact match:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100
+
+However, the same packet would NOT match this interface because '*exact-match*' is specified and only one VLAN is configured, but packet contains two VLANs:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match
+
+Example of how to created a subinterface to process untagged packets:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 untagged
+
+Example of how to created a subinterface to process any packet with a VLAN ID that does not match any other subinterface:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 7 default
+
+When subinterfaces are created, they are in the down state. Example of how to enable a newly created subinterface:
+
+.. code-block:: console
+
+ vpp# set interface GigabitEthernet2/0/0.7 up
+
diff --git a/docs/reference/cmdreference/vhost/index.rst b/docs/reference/cmdreference/vhost/index.rst
new file mode 100644
index 00000000000..3e41718af26
--- /dev/null
+++ b/docs/reference/cmdreference/vhost/index.rst
@@ -0,0 +1,8 @@
+.. _vhostcommands:
+
+Vhost User Commands
+===================
+
+.. toctree::
+
+ vhostuser
diff --git a/docs/reference/cmdreference/vhost/vhostuser.rst b/docs/reference/cmdreference/vhost/vhostuser.rst
new file mode 100644
index 00000000000..a21c314404c
--- /dev/null
+++ b/docs/reference/cmdreference/vhost/vhostuser.rst
@@ -0,0 +1,269 @@
+.. _vhostusercommands:
+
+.. toctree::
+
+.. _createvhostuser:
+
+Create Vhost-User
+=================
+
+Create a vHost User interface. Once created, a new virtual interface
+will exist with the name '*VirtualEthernet0/0/x*', where '*x*' is the
+next free index.
+
+There are several parameters associated with a vHost interface:
+
+- **socket <socket-filename>** - Name of the linux socket used by
+ hypervisor and VPP to manage the vHost interface. If in '*server*'
+ mode, VPP will create the socket if it does not already exist. If in
+ '*client*' mode, hypervisor will create the socket if it does not
+ already exist. The VPP code is indifferent to the file location.
+ However, if SELinux is enabled, then the socket needs to be created
+ in '*/var/run/vpp/*'.
+- **server** - Optional flag to indicate that VPP should be the server
+ for the linux socket. If not provided, VPP will be the client. In
+ '*server*' mode, the VM can be reset without tearing down the vHost
+ Interface. In '*client*' mode, VPP can be reset without bringing down
+ the VM and tearing down the vHost Interface.
+- **feature-mask <hex>** - Optional virtio/vhost feature set negotiated
+ at startup. **This is intended for degugging only.** It is
+ recommended that this parameter not be used except by experienced
+ users. By default, all supported features will be advertised.
+ Otherwise, provide the set of features desired.
+
+ - 0x000008000 (15) - VIRTIO_NET_F_MRG_RXBUF
+ - 0x000020000 (17) - VIRTIO_NET_F_CTRL_VQ
+ - 0x000200000 (21) - VIRTIO_NET_F_GUEST_ANNOUNCE
+ - 0x000400000 (22) - VIRTIO_NET_F_MQ
+ - 0x004000000 (26) - VHOST_F_LOG_ALL
+ - 0x008000000 (27) - VIRTIO_F_ANY_LAYOUT
+ - 0x010000000 (28) - VIRTIO_F_INDIRECT_DESC
+ - 0x040000000 (30) - VHOST_USER_F_PROTOCOL_FEATURES
+ - 0x100000000 (32) - VIRTIO_F_VERSION_1
+
+- **hwaddr <mac-addr>** - Optional ethernet address, can be in either
+ X:X:X:X:X:X unix or X.X.X cisco format.
+- **renumber <dev_instance>** - Optional parameter which allows the
+ instance in the name to be specified. If instance already exists,
+ name will be used anyway and multiple instances will have the same
+ name. Use with caution.
+
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ create vhost-user socket <socket-filename> [server] [feature-mask <hex>] [hwaddr <mac-addr>] [renumber <dev_instance>]
+
+
+Examples
+--------
+
+ Example of how to create a vhost interface with VPP as the client
+ and all features enabled:
+
+.. code-block:: console
+
+ vpp# create vhost-user socket /var/run/vpp/vhost1.sock
+ VirtualEthernet0/0/0
+
+Example of how to create a vhost interface with VPP as the server
+and with just multiple queues enabled:
+
+.. code-block:: console
+
+ vpp# create vhost-user socket /var/run/vpp/vhost2.sock server feature-mask 0x40400000
+ VirtualEthernet0/0/1
+
+Once the vHost interface is created, enable the interface using:
+
+.. code-block:: console
+
+ vpp# set interface state VirtualEthernet0/0/0 up
+
+.. _showvhost:
+
+Show Vhost-User
+===============
+
+Display the attributes of a single vHost User interface (provide
+interface name), multiple vHost User interfaces (provide a list of
+interface names seperated by spaces) or all Vhost User interfaces (omit
+an interface name to display all vHost interfaces).
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ show vhost-user [<interface> [<interface> [..]]] [descriptors].
+
+Examples
+--------
+Example of how to display a vhost interface:
+
+.. code-block:: console
+
+ vpp# show vhost-user VirtualEthernet0/0/0
+ Virtio vhost-user interfaces
+ Global:
+ coalesce frames 32 time 1e-3
+ Interface: VirtualEthernet0/0/0 (ifindex 1)
+ virtio_net_hdr_sz 12
+ features mask (0xffffffffffffffff):
+ features (0x50408000):
+ VIRTIO_NET_F_MRG_RXBUF (15)
+ VIRTIO_NET_F_MQ (22)
+ VIRTIO_F_INDIRECT_DESC (28)
+ VHOST_USER_F_PROTOCOL_FEATURES (30)
+ protocol features (0x3)
+ VHOST_USER_PROTOCOL_F_MQ (0)
+ VHOST_USER_PROTOCOL_F_LOG_SHMFD (1)
+
+ socket filename /var/run/vpp/vhost1.sock type client errno "Success"
+
+ rx placement:
+ thread 1 on vring 1
+ thread 1 on vring 5
+ thread 2 on vring 3
+ thread 2 on vring 7
+ tx placement: spin-lock
+ thread 0 on vring 0
+ thread 1 on vring 2
+ thread 2 on vring 0
+
+ Memory regions (total 2)
+ region fd guest_phys_addr memory_size userspace_addr mmap_offset mmap_addr
+ ====== ===== ================== ================== ================== ================== ==================
+ 0 60 0x0000000000000000 0x00000000000a0000 0x00002aaaaac00000 0x0000000000000000 0x00002aab2b400000
+ 1 61 0x00000000000c0000 0x000000003ff40000 0x00002aaaaacc0000 0x00000000000c0000 0x00002aababcc0000
+
+ Virtqueue 0 (TX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
+ kickfd 62 callfd 64 errfd -1
+
+ Virtqueue 1 (RX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 65 callfd 66 errfd -1
+
+ Virtqueue 2 (TX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
+ kickfd 63 callfd 70 errfd -1
+
+ Virtqueue 3 (RX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 72 callfd 74 errfd -1
+
+ Virtqueue 4 (TX disabled)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 76 callfd 78 errfd -1
+
+ Virtqueue 5 (RX disabled)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 80 callfd 82 errfd -1
+
+ Virtqueue 6 (TX disabled)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 84 callfd 86 errfd -1
+
+ Virtqueue 7 (RX disabled)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 0 used.flags 1 used.idx 0
+ kickfd 88 callfd 90 errfd -1
+
+The optional '*descriptors*' parameter will display the same output as the
+previous example but will include the descriptor table for each queue. The output is truncated below:
+
+.. code-block:: console
+
+ vpp# show vhost-user VirtualEthernet0/0/0 descriptors
+
+ Virtio vhost-user interfaces
+ Global:
+ coalesce frames 32 time 1e-3
+ Interface: VirtualEthernet0/0/0 (ifindex 1)
+ virtio_net_hdr_sz 12
+ features mask (0xffffffffffffffff):
+ features (0x50408000):
+ VIRTIO_NET_F_MRG_RXBUF (15)
+ VIRTIO_NET_F_MQ (22)
+ :
+ Virtqueue 0 (TX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+ avail.flags 1 avail.idx 128 used.flags 1 used.idx 0
+ kickfd 62 callfd 64 errfd -1
+
+ descriptor table:
+ id addr len flags next user_addr
+ ===== ================== ===== ====== ===== ==================
+ 0 0x0000000010b6e974 2060 0x0002 1 0x00002aabbc76e974
+ 1 0x0000000010b6e034 2060 0x0002 2 0x00002aabbc76e034
+ 2 0x0000000010b6d6f4 2060 0x0002 3 0x00002aabbc76d6f4
+ 3 0x0000000010b6cdb4 2060 0x0002 4 0x00002aabbc76cdb4
+ 4 0x0000000010b6c474 2060 0x0002 5 0x00002aabbc76c474
+ 5 0x0000000010b6bb34 2060 0x0002 6 0x00002aabbc76bb34
+ 6 0x0000000010b6b1f4 2060 0x0002 7 0x00002aabbc76b1f4
+ 7 0x0000000010b6a8b4 2060 0x0002 8 0x00002aabbc76a8b4
+ 8 0x0000000010b69f74 2060 0x0002 9 0x00002aabbc769f74
+ 9 0x0000000010b69634 2060 0x0002 10 0x00002aabbc769634
+ 10 0x0000000010b68cf4 2060 0x0002 11 0x00002aabbc768cf4
+ :
+ 249 0x0000000000000000 0 0x0000 250 0x00002aab2b400000
+ 250 0x0000000000000000 0 0x0000 251 0x00002aab2b400000
+ 251 0x0000000000000000 0 0x0000 252 0x00002aab2b400000
+ 252 0x0000000000000000 0 0x0000 253 0x00002aab2b400000
+ 253 0x0000000000000000 0 0x0000 254 0x00002aab2b400000
+ 254 0x0000000000000000 0 0x0000 255 0x00002aab2b400000
+ 255 0x0000000000000000 0 0x0000 32768 0x00002aab2b400000
+
+ Virtqueue 1 (RX)
+ qsz 256 last_avail_idx 0 last_used_idx 0
+
+
+Debug Vhost-User
+================
+Turn on/off debug for vhost
+
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ debug vhost-user <on | off>.
+
+Delete Vhost-User
+========================
+Delete a vHost User interface using the interface name or the software
+interface index. Use the '*show interface*' command to determine the
+software interface index. On deletion, the linux socket will not be
+deleted.
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ delete vhost-user {<interface> | sw_if_index <sw_idx>}.
+
+Examples
+--------
+Example of how to delete a vhost interface by name:
+
+.. code-block:: console
+
+ vpp# delete vhost-user VirtualEthernet0/0/1
+
+Example of how to delete a vhost interface by software interface index:
+
+.. code-block:: console
+
+ vpp# delete vhost-user sw_if_index 1