summaryrefslogtreecommitdiffstats
path: root/docs/usecases
diff options
context:
space:
mode:
Diffstat (limited to 'docs/usecases')
-rw-r--r--docs/usecases/container_test.md132
1 files changed, 66 insertions, 66 deletions
diff --git a/docs/usecases/container_test.md b/docs/usecases/container_test.md
index dc45aabe57b..ad0bc2ea098 100644
--- a/docs/usecases/container_test.md
+++ b/docs/usecases/container_test.md
@@ -64,9 +64,9 @@ Create three network segments
Aka, linux bridges.
```
- # lxc network create dora
+ # lxc network create respond
# lxc network create internet
- # lxc network create swan
+ # lxc network create initiate
```
We'll explain the test topology in a bit. Stay tuned.
@@ -95,12 +95,12 @@ containers, run vpp without installing it, etc.
eth2:
name: eth2
nictype: bridged
- parent: dora
+ parent: respond
type: nic
eth3:
name: eth3
nictype: bridged
- parent: swan
+ parent: initiate
type: nic
root:
path: /
@@ -142,10 +142,10 @@ and host configuration:
- none
```
-Repeat the process with the "dora" and "swan" networks, using these
+Repeat the process with the "respond" and "initiate" networks, using these
configurations:
-### dora network configuration
+### respond network configuration
```
config:
@@ -155,7 +155,7 @@ configurations:
ipv6.address: none
ipv6.nat: "false"
description: ""
- name: dora
+ name: respond
type: bridge
used_by:
managed: true
@@ -163,7 +163,7 @@ configurations:
locations:
- none
```
-### swan network configuration
+### initiate network configuration
```
config:
@@ -173,7 +173,7 @@ configurations:
ipv6.address: none
ipv6.nat: "false"
description: ""
- name: swan
+ name: initiate
type: bridge
used_by:
managed: true
@@ -191,14 +191,14 @@ build vpp, ssh into the container, edit source code, run gdb, etc.
Make sure that e.g. public key auth ssh works.
```
- # lxd launch ubuntu:18.04 dora
+ # lxd launch ubuntu:18.04 respond
<spew>
- # lxc exec dora bash
- dora# cd /scratch/my-vpp-workspace
- dora# apt-get install make ssh
- dora# make install-dep
- dora# exit
- # lxc stop dora
+ # lxc exec respond bash
+ respond# cd /scratch/my-vpp-workspace
+ respond# apt-get install make ssh
+ respond# make install-dep
+ respond# exit
+ # lxc stop respond
```
Mark the container image privileged. If you forget this step, you'll
@@ -206,7 +206,7 @@ trip over a netlink error (-11) aka EAGAIN when you try to roll in the
vpp configurations.
```
- # lxc config set dora security.privileged "true"
+ # lxc config set respond security.privileged "true"
```
Duplicate the "master" container image
@@ -216,10 +216,10 @@ To avoid having to configure N containers, be sure that the master
container image is fully set up before you help it have children:
```
- # lxc copy dora dorahost
- # lxc copy dora swan
- # lxc copy dora swanhost
- # lxc copy dora dhcpserver # optional, to test ipv6 prefix delegation
+ # lxc copy respond respondhost
+ # lxc copy respond initiate
+ # lxc copy respond initiatehost
+ # lxc copy respond dhcpserver # optional, to test ipv6 prefix delegation
```
Install handy script
@@ -250,7 +250,7 @@ Here's the script:
#!/bin/bash
set -u
- export containers="dora dorahost swan swanhost dhcpserver"
+ export containers="respond respondhost initiate initiatehost dhcpserver"
if [ x$1 = "x" ] ; then
echo missing command
@@ -292,16 +292,16 @@ Finally, we're ready to describe a test topology. First, a picture:
v | v
eth0 | eth0
+------+ eth1 eth1 +------+
- | dora | 10.26.88.100 <= internet bridge => 10.26.88.101 | swan |
+ | respond | 10.26.88.100 <= internet bridge => 10.26.88.101 | initiate |
+------+ +------+
eth2 / bvi0 10.166.14.2 | 10.219.188.2 eth3 / bvi0
| | |
- | ("dora" bridge) | ("swan" bridge) |
+ | ("respond" bridge) | ("initiate" bridge) |
| | |
v | v
eth2 10.166.14.3 | eth3 10.219.188.3
+----------+ | +----------+
- | dorahost | | | dorahost |
+ | respondhost | | | respondhost |
+----------+ | +----------+
eth0 (management lan) <========+========> eth0 (management lan)
```
@@ -309,14 +309,14 @@ Finally, we're ready to describe a test topology. First, a picture:
### Test topology discussion
This topology is suitable for testing almost any tunnel encap/decap
-scenario. The two containers "dorahost" and "swanhost" are end-stations
-connected to two vpp instances running on "dora" and "swan".
+scenario. The two containers "respondhost" and "initiatehost" are end-stations
+connected to two vpp instances running on "respond" and "initiate".
We leverage the Linux end-station network stacks to generate traffic
of all sorts.
-The so-called "internet" bridge models the public internet. The "dora" and
-"swan" bridges connect vpp instances to local hosts
+The so-called "internet" bridge models the public internet. The "respond" and
+"initiate" bridges connect vpp instances to local hosts
End station configs
-------------------
@@ -325,14 +325,14 @@ The end-station Linux configurations set up the eth2 and eth3 ip
addresses shown above, and add tunnel routes to the opposite
end-station networks.
-### dorahost configuration
+### respondhost configuration
```
ifconfig eth2 10.166.14.3/24 up
route add -net 10.219.188.0/24 gw 10.166.14.2
```
-### swanhost configuration
+### initiatehost configuration
```
sudo ifconfig eth3 10.219.188.3/24 up
@@ -343,9 +343,9 @@ VPP configs
-----------
Split nat44 / ikev2 + ipsec tunneling, with ipv6 prefix delegation in
-the "dora" config.
+the "respond" config.
-### dora configuration
+### respond configuration
```
set term pag off
@@ -356,10 +356,10 @@ the "dora" config.
set int ip6 table host-eth1 0
set int state host-eth1 up
- comment { default route via swan }
+ comment { default route via initiate }
ip route add 0.0.0.0/0 via 10.26.68.101
- comment { "dora-private-net" }
+ comment { "respond-private-net" }
create host-interface name eth2
bvi create instance 0
set int l2 bridge bvi0 1 bvi
@@ -376,16 +376,16 @@ the "dora" config.
comment { nat44 untranslated subnet 10.219.188.0/24 }
comment { responder profile }
- ikev2 profile add swan
- ikev2 profile set swan udp-encap
- ikev2 profile set swan auth rsa-sig cert-file /scratch/setups/doracert.pem
- set ikev2 local key /scratch/setups/swankey.pem
- ikev2 profile set swan id local fqdn swan.barachs.net
- ikev2 profile set swan id remote fqdn broiler2.barachs.net
- ikev2 profile set swan traffic-selector remote ip-range 10.219.188.0 - 10.219.188.255 port-range 0 - 65535 protocol 0
- ikev2 profile set swan traffic-selector local ip-range 10.166.14.0 - 10.166.14.255 port-range 0 - 65535 protocol 0
+ ikev2 profile add initiate
+ ikev2 profile set initiate udp-encap
+ ikev2 profile set initiate auth rsa-sig cert-file /scratch/setups/respondcert.pem
+ set ikev2 local key /scratch/setups/initiatekey.pem
+ ikev2 profile set initiate id local fqdn initiator.my.net
+ ikev2 profile set initiate id remote fqdn responder.my.net
+ ikev2 profile set initiate traffic-selector remote ip-range 10.219.188.0 - 10.219.188.255 port-range 0 - 65535 protocol 0
+ ikev2 profile set initiate traffic-selector local ip-range 10.166.14.0 - 10.166.14.255 port-range 0 - 65535 protocol 0
create ipip tunnel src 10.26.68.100 dst 10.26.68.101
- ikev2 profile set swan tunnel ipip0
+ ikev2 profile set initiate tunnel ipip0
comment { ipv6 prefix delegation }
ip6 nd address autoconfig host-eth1 default-route
@@ -400,21 +400,21 @@ the "dora" config.
ip route add 10.219.188.0/24 via ipip0
```
-### swan configuration
+### initiate configuration
```
set term pag off
comment { "internet" }
create host-interface name eth1
- comment { set dhcp client intfc host-eth1 hostname swan }
+ comment { set dhcp client intfc host-eth1 hostname initiate }
set int ip address host-eth1 10.26.68.101/24
set int state host-eth1 up
comment { default route via "internet gateway" }
comment { ip route add 0.0.0.0/0 via 10.26.68.1 }
- comment { "swan-private-net" }
+ comment { "initiate-private-net" }
create host-interface name eth3
bvi create instance 0
set int l2 bridge bvi0 1 bvi
@@ -430,24 +430,24 @@ the "dora" config.
comment { nat44 untranslated subnet 10.166.14.0/24 }
comment { initiator profile }
- ikev2 profile add dora
- ikev2 profile set dora udp-encap
- ikev2 profile set dora auth rsa-sig cert-file /scratch/setups/swancert.pem
- set ikev2 local key /scratch/setups/dorakey.pem
- ikev2 profile set dora id local fqdn broiler2.barachs.net
- ikev2 profile set dora id remote fqdn swan.barachs.net
+ ikev2 profile add respond
+ ikev2 profile set respond udp-encap
+ ikev2 profile set respond auth rsa-sig cert-file /scratch/setups/initiatecert.pem
+ set ikev2 local key /scratch/setups/respondkey.pem
+ ikev2 profile set respond id local fqdn responder.my.net
+ ikev2 profile set respond id remote fqdn initiator.my.net
- ikev2 profile set dora traffic-selector remote ip-range 10.166.14.0 - 10.166.14.255 port-range 0 - 65535 protocol 0
- ikev2 profile set dora traffic-selector local ip-range 10.219.188.0 - 10.219.188.255 port-range 0 - 65535 protocol 0
+ ikev2 profile set respond traffic-selector remote ip-range 10.166.14.0 - 10.166.14.255 port-range 0 - 65535 protocol 0
+ ikev2 profile set respond traffic-selector local ip-range 10.219.188.0 - 10.219.188.255 port-range 0 - 65535 protocol 0
- ikev2 profile set dora responder host-eth1 10.26.68.100
- ikev2 profile set dora ike-crypto-alg aes-cbc 256 ike-integ-alg sha1-96 ike-dh modp-2048
- ikev2 profile set dora esp-crypto-alg aes-cbc 256 esp-integ-alg sha1-96 esp-dh ecp-256
- ikev2 profile set dora sa-lifetime 3600 10 5 0
+ ikev2 profile set respond responder host-eth1 10.26.68.100
+ ikev2 profile set respond ike-crypto-alg aes-cbc 256 ike-integ-alg sha1-96 ike-dh modp-2048
+ ikev2 profile set respond esp-crypto-alg aes-cbc 256 esp-integ-alg sha1-96 esp-dh ecp-256
+ ikev2 profile set respond sa-lifetime 3600 10 5 0
create ipip tunnel src 10.26.68.101 dst 10.26.68.100
- ikev2 profile set dora tunnel ipip0
- ikev2 initiate sa-init dora
+ ikev2 profile set respond tunnel ipip0
+ ikev2 initiate sa-init respond
set int mtu packet 1390 ipip0
set int unnum ipip0 use host-eth1
@@ -463,13 +463,13 @@ mentioned. These certificates are used in the ikev2 key exchange.
Here's how to generate the certificates:
```
- openssl req -x509 -nodes -newkey rsa:4096 -keyout dorakey.pem -out doracert.pem -days 3560
- openssl x509 -text -noout -in doracert.pem
- openssl req -x509 -nodes -newkey rsa:4096 -keyout swankey.pem -out swancert.pem -days 3560
- openssl x509 -text -noout -in swancert.pem
+ openssl req -x509 -nodes -newkey rsa:4096 -keyout respondkey.pem -out respondcert.pem -days 3560
+ openssl x509 -text -noout -in respondcert.pem
+ openssl req -x509 -nodes -newkey rsa:4096 -keyout initiatekey.pem -out initiatecert.pem -days 3560
+ openssl x509 -text -noout -in initiatecert.pem
```
-Make sure that the "dora" and "swan" configurations point to the certificates.
+Make sure that the "respond" and "initiate" configurations point to the certificates.
DHCPv6 server setup
-------------------