diff options
Diffstat (limited to 'doxygen')
38 files changed, 0 insertions, 4893 deletions
diff --git a/doxygen/Makefile b/doxygen/Makefile deleted file mode 100644 index e399b404a26..00000000000 --- a/doxygen/Makefile +++ /dev/null @@ -1,270 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# -# Build the documentation -# - -# Default target -.PHONY: all -all: doxygen - -# These should be passed in by the root Makefile -WS_ROOT ?= $(CURDIR)/.. -BR ?= $(WS_ROOT)/build-root - -# We support MacOS for docs generation -ifeq ($(shell uname),Darwin) -OS_ID = darwin -endif - -# Work out the OS if we haven't already -OS_ID ?= $(shell grep '^ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g') - -# Package dependencies -DOC_DEB_DEPENDS = doxygen graphviz python3-pyparsing python3-jinja2 -DOC_RPM_DEPENDS = doxygen graphviz python3-pyparsing python3-jinja2 -DOC_MAC_BIN_DEPENDS = doxygen dot git -DOC_MAC_PY_DEPENDS = pyparsing jinja2 - -# Doxygen configuration and our utility scripts -DOXY_DIR ?= $(WS_ROOT)/doxygen - -# Primary source directories -DOXY_SRC ?= $(WS_ROOT)/src -DOXY_SRC_DIRECTORIES = \ - $(shell find $(DOXY_SRC) -name '*.md' -print | xargs dirname \ - | sort | uniq) \ - $(DOXY_SRC)/vppinfra \ - $(DOXY_SRC)/svm \ - $(DOXY_SRC)/vlib \ - $(DOXY_SRC)/vlibapi \ - $(DOXY_SRC)/vlibmemory \ - $(DOXY_SRC)/vnet \ - $(DOXY_SRC)/vpp \ - $(DOXY_SRC)/vpp-api \ - $(DOXY_SRC)/examples - -# Input directories and files -DOXY_INPUT ?= \ - $(wildcard $(WS_ROOT)/*.md) \ - $(wildcard $(DOXY_DIR)/*.md) \ - $(DOXY_SRC_DIRECTORIES) \ - $(DOXY_SRC)/plugins \ - extras - -# Strip leading workspace path from input names -DOXY_INPUT := $(subst $(WS_ROOT)/,,$(DOXY_INPUT)) - -# Files to exclude, from pre-Doxygen steps, eg because they're -# selectively compiled. -# Examples would be to exclude non-DPDK related sources when -# there's a DPDK equivalent that conflicts. -# These must be left-anchored paths for the regexp below to work. -DOXY_EXCLUDE ?= \ - $(DOXY_SRC)/vpp-api/lua - -# Generate a regexp for filenames to exclude -DOXY_EXCLUDE_REGEXP = ($(subst .,\.,$(shell echo '$(strip $(DOXY_EXCLUDE))' | sed -e 's/ /|/g'))) - -# Include all the normal source directories in the include file path -DOXY_INCLUDE_PATH = $(DOXY_SRC_DIRECTORIES) - -# Find API header directories and include them in the header path. -# This is only useful if VPP and plugins are already built; nothing -# here depends on those targets. We don't build documentation for these -# header files, they're just added to the INCLUDE search path for Doxygen. -_vpp_br = $(shell find "$(BR)" -maxdepth 1 -type d \ - '(' -name build-vpp_debug-native -o -name build-vpp-native ')' -print \ - | sed -e 's@^$(WS_ROOT)/*@@' -e 1q) -ifneq ($(strip $(_vpp_br)),) -DOXY_INCLUDE_PATH += \ - $(_vpp_br)/vlib-api \ - $(_vpp_br)/vpp -# Also include any plugin directories that exist -DOXY_INCLUDE_PATH += \ - $(shell find $(WS_ROOT)/$(_vpp_br)/plugins -maxdepth 1 -type d | sed -e 's@^$(WS_ROOT)/*@@') -endif - -# Discover if we have CPP available -_cpp = $(shell which cpp) -ifneq ($(strip $(_cpp)),) -# Add whatever directories CPP normally includes to the header path -DOXY_INCLUDE_PATH += $(shell set -e; $(_cpp) -v </dev/null 2>&1 | awk 'f&&/^ /{print $$1} /^\#include/{f=1}') -endif - -# Target directory for doxygen output -DOXY_OUTPUT ?= $(BR)/docs - -# Siphoned fragments end up in here -SIPHON_INPUT ?= $(DOXY_OUTPUT)/siphon_fragments - -# Siphoned fragements are processed into here -SIPHON_OUTPUT ?= $(DOXY_OUTPUT)/siphon_docs - -# Extra document inputs that are processed in addition to DOXY_INPUT -EXTRA_DOXY_INPUT += $(SIPHON_OUTPUT) - -# All the siphon types we know about -SIPHONS ?= clicmd syscfg - -SIPHON_FILES = $(addprefix $(SIPHON_INPUT)/,$(addsuffix .siphon,$(SIPHONS))) -SIPHON_DOCS = $(addprefix $(SIPHON_OUTPUT)/,$(addsuffix .md,$(SIPHONS))) -SIPHON_ITEMLIST = $(addprefix $(SIPHON_OUTPUT)/,$(addsuffix .itemlist,$(filter clicmd,$(SIPHONS)))) - -$(BR)/.doxygen-bootstrap.ok: Makefile - @echo "Checking whether dependencies for Doxygen are installed..." -ifeq ($(OS_ID),ubuntu) - @set -e; inst=; \ - for i in $(DOC_DEB_DEPENDS); do \ - dpkg-query --show $$i >/dev/null 2>&1 || inst="$$inst $$i"; \ - done; \ - if [ "$$inst" ]; then \ - sudo apt-get update; \ - sudo apt-get $(CONFIRM) $(FORCE) install $$inst; \ - fi - @if [ ! -s /usr/lib/graphviz/config6a ]; then \ - echo "Rebuilding system Graphviz configuration."; \ - sudo dot -c; \ - fi -else ifneq ("$(wildcard /etc/redhat-release)","") - @sudo yum install $(CONFIRM) $(DOC_RPM_DEPENDS) -else ifeq ($(OS_ID),darwin) - @set -e; \ - for bin in $(DOC_MAC_BIN_DEPENDS); do \ - which -s $${bin} || (\ - echo "Program '$${bin}' not found, please install it."; \ - false; \ - ); \ - done - @set -e; \ - for py in $(DOC_MAC_PY_DEPENDS); do \ - python -c "import $${py}" >/dev/null 2>&1 || (\ - echo "Python package '$${py}' not found, please install it."; \ - false; \ - ); \ - done -else - $(error "Building documentation currently works only on Ubuntu, CentOS, MacOS and OpenSUSE systems.") -endif - @touch $@ - -.PHONY: bootstrap-doxygen -bootstrap-doxygen: $(BR)/.doxygen-bootstrap.ok - -.DELETE_ON_ERROR: $(BR)/.doxygen-siphon.dep -$(BR)/.doxygen-siphon.dep: Makefile \ - $(addprefix,$(WSROOT),$(DOXY_INPUT)) - @echo "Building siphon dependencies..." - @rm -f "$@"; for input in $(DOXY_INPUT); do \ - [ -e "$(WS_ROOT)/$$input" ] && \ - find "$(WS_ROOT)/$$input" -type f \ - \( -name '*.[ch]' -or -name '*.dox' \) -print \ - | grep -v -E '^$(WS_ROOT)/$(DOXY_EXCLUDE_REGEXP)' \ - | sed -e "s/^/\$$(SIPHON_FILES): /" \ - >> $@; \ - done - -# Include the source -> siphon dependencies --include $(BR)/.doxygen-siphon.dep - -# Generate .siphon files that contain fragments of source file that -# relate to the siphons we support. -.NOTPARALLEL: $(SIPHON_FILES) -$(SIPHON_FILES): $(BR)/.doxygen-bootstrap.ok \ - $(DOXY_DIR)/siphon-generate \ - $(addprefix,$(WSROOT),$(DOXY_INPUT)) \ - $(wildcard $(DOXY_DIR)/siphon/*.py) - @echo "Validating source tree..." - @set -e; for input in $(DOXY_INPUT); do \ - if [ ! -e "$(WS_ROOT)/$$input" ]; then \ - echo "ERROR: Input path '$$input' does not exist." >&2; \ - exit 1; \ - fi; \ - done - @rm -rf "$(SIPHON_INPUT)" "$(SIPHON_OUTPUT)" - @mkdir -p "$(SIPHON_INPUT)" "$(SIPHON_OUTPUT)" - @touch $(SIPHON_INPUT)/files - @echo "Collating source file list for siphoning..." - @for input in $(DOXY_INPUT); do \ - cd "$(WS_ROOT)"; \ - find "$$input" -type f \ - \( -name '*.[ch]' -or -name '*.dox' \) -print \ - | grep -v -E '^src/examples/' \ - | grep -v -E '^$(DOXY_EXCLUDE_REGEXP)' \ - >> $(SIPHON_INPUT)/files; \ - done - @echo "Generating siphons..." - @set -e; \ - cd "$(WS_ROOT)"; \ - $(DOXY_DIR)/siphon-generate \ - --output="$(SIPHON_INPUT)" \ - "@$(SIPHON_INPUT)/files" - -# Evaluate this to build a siphon doc output target for each desired -# output type: -# $(eval $(call siphon-process,file_extension,output_type_name)) -define siphon-process -$(SIPHON_OUTPUT)/%.$(1): $(SIPHON_INPUT)/%.siphon \ - $(DOXY_DIR)/siphon-process \ - $(wildcard $(DOXY_DIR)/siphon/*.py) \ - $(wildcard $(DOXY_DIR)/siphon_templates/$(2)/*/*.$(1)) - @echo "Processing siphon for $(2) from $$(notdir $$<)..." - @set -e; \ - cd "$(WS_ROOT)"; \ - $(DOXY_DIR)/siphon-process \ - --type=$$(basename $$(notdir $$<)) \ - --format=$(2) \ - --output="$$@" \ - "$$<" -endef - -# Process the .siphon source fragments and render them into doxygen flavored -# markdown documentation -.DELETE_ON_ERROR: $(SIPHON_DOCS) -$(eval $(call siphon-process,md,markdown)) - -# Process the .siphon source fragments and render them into a list of cli -# commands. -.DELETE_ON_ERROR: $(SIPHON_ITEMLIST) -$(eval $(call siphon-process,itemlist,itemlist)) - -# This target can be used just to generate the siphoned things -.PHONY: doxygen-siphon -doxygen-siphon: $(SIPHON_DOCS) $(SIPHON_ITEMLIST) - -# Generate the doxygen docs -.PHONY: doxygen -doxygen: $(SIPHON_DOCS) - @mkdir -p "$(DOXY_OUTPUT)" - @echo "Running Doxygen..." - set -e; cd "$(WS_ROOT)"; \ - ROOT="$(WS_ROOT)" \ - BUILD_ROOT="$(BR)" \ - INPUT="$(addprefix $(WS_ROOT)/,$(DOXY_INPUT)) $(EXTRA_DOXY_INPUT)" \ - INCLUDE_PATH="$(DOXY_INCLUDE_PATH)" \ - EXCLUDE="$(DOXY_EXCLUDE)" \ - HTML=YES \ - VERSION="`git describe --tags --dirty`" \ - doxygen $(DOXY_DIR)/doxygen.cfg - -.PHONY: wipe-doxygen -wipe-doxygen: - @rm -rf $(BR)/docs - @rm -rf $(BR)/.doxygen-siphon.dep - @rm -rf $(BR)/.doxygen-bootstrap.ok - @rm -rf $(DOXY_DIR)/siphon/__pycache__ - -.PHONY: clean -clean: wipe-doxygen diff --git a/doxygen/assets/doxy-vpp.css b/doxygen/assets/doxy-vpp.css deleted file mode 100644 index 108600acefc..00000000000 --- a/doxygen/assets/doxy-vpp.css +++ /dev/null @@ -1,53 +0,0 @@ -/* VPP CSS overrides */ - -body, table, div, p, dl { - font: initial; - font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif; - font-size: small; -} - -code, tt { - font: initial; - font-family: Consolas, Courier, monospace; - font-size: small; -} - -pre { - font-size: 105%; -} - - -.title { - font: initial; - font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif; - font-size: 150%; - font-weight: bold; -} - - -.mdescLeft, .mdescRight, -.memItemLeft, .memItemRight, -.memTemplItemLeft, .memTemplItemRight, .memTemplParams { - font-family: Consolas, Courier, monospace; -} - -.memname { - font-family: Consolas, Courier, monospace; - font-weight: bold; - font-size: 105%; -} - -.paramname { - font-family: Consolas, Courier, monospace; - font-weight: bold; -} - -a.el { - font-family: Consolas, Courier, monospace; -} - -div.fragment { - padding: 2px; - margin-left: 8px; -} - diff --git a/doxygen/assets/logo_fdio.png b/doxygen/assets/logo_fdio.png Binary files differdeleted file mode 100644 index ddfef2c7335..00000000000 --- a/doxygen/assets/logo_fdio.png +++ /dev/null diff --git a/doxygen/dev_doc.md b/doxygen/dev_doc.md deleted file mode 100644 index 77a32acaa0f..00000000000 --- a/doxygen/dev_doc.md +++ /dev/null @@ -1,27 +0,0 @@ -Developer Documentation {#dev_doc} -======================= - -Programming notes for developers. - -- @subpage test_framework_doc -- @subpage sample_plugin_doc -- @subpage api_doc -- @subpage vapi_doc -- @subpage acl_hash_lookup -- @subpage acl_multicore -- @subpage acl_lookup_context -- @subpage libmemif_doc -- @subpage syslog_doc -- @subpage ipfix_doc -- @subpage stats_doc -- @subpage if_stats_client_doc -- @subpage api_lang_doc -- @subpage handoff_queue_demo_plugin -- @subpage lcov_code_coverage -- @subpage mdata_doc -- @subpage mempreload_doc -- @subpage pnat_doc -- @subpage snap_doc -- @subpage srv6_ad_flow_plugin_doc -- @subpage strongswan_test_doc -- @subpage srtp_doc diff --git a/doxygen/dir.dox.sample b/doxygen/dir.dox.sample deleted file mode 100644 index ccdd095abb2..00000000000 --- a/doxygen/dir.dox.sample +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) <YEAR> <YOUR AFFILIATION HERE> - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* Doxygen directory documentation */ - -/** -@dir -@brief Someone please fix this description. -@todo This directory needs a description. - -This is where you would document the contents of a directory. - -This looks like a C file but it is not part of the build; it is purely -for documentation. -*/ -/*? %%clicmd:group_label CLI section description%% ?*/ -/*? %%syscfg:group_label Startup config section description%% ?*/ diff --git a/doxygen/doxygen.cfg b/doxygen/doxygen.cfg deleted file mode 100644 index 08356f40bce..00000000000 --- a/doxygen/doxygen.cfg +++ /dev/null @@ -1,2457 +0,0 @@ -# Doxyfile 1.8.11 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "FD.io VPP" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = $(VERSION) - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = "Vector Packet Processing" - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = $(ROOT)/doxygen/assets/logo_fdio.png - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = $(BUILD_ROOT)/docs - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = YES - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = $(ROOT) - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = $(ROOT) - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -## Indexes VPP graph nodes -ALIASES += "node=@xrefitem nodes \"Node Identifier\" \"Node Identifiers\" @c " - -## Formatting for CLI commands and output -ALIASES += "cli{1}=<code><pre>\1</code></pre>" -ALIASES += "clistart=<code><pre>" -ALIASES += "cliend=</pre></code>" - -## Formatting for CLI example paragraphs -ALIASES += "cliexpar=@par Example usage" -ALIASES += "cliexcmd{1}=@clistart<b>vpp# <em>\1</em></b>@cliend" -ALIASES += "cliexstart{1}=@cliexcmd{\1}@clistart" -ALIASES += "cliexend=@cliend" - -## Formatting for config directives -ALIASES += "cfgcmd{2}=@par <code><pre>\1 \2</pre></code>" -ALIASES += "cfgcmd{1}=@par <code><pre>\1</pre></code>" - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note: For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = def=C api=C - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = YES - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# If one adds a struct or class to a group and this option is enabled, then also -# any nested class or struct is added to the same group. By default this option -# is disabled and one has to add nested compounds explicitly via \ingroup. -# The default value is: NO. - -GROUP_NESTED_COMPOUNDS = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO, -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. If set to YES, local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO, only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO, these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES, the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will -# append additional text to a page's title, such as Class Reference. If set to -# YES the compound reference will be hidden. -# The default value is: NO. - -HIDE_COMPOUND_REFERENCE= NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = NO - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = YES - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo -# list. This list is created by putting \todo commands in the documentation. -# The default value is: YES. - -GENERATE_TODOLIST = NO - -# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test -# list. This list is created by putting \test commands in the documentation. -# The default value is: YES. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if <section_label> ... \endif and \cond <section_label> -# ... \endcond blocks. - -ENABLED_SECTIONS = DPDK - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 50 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES, the -# list will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = $(ROOT)/doxygen/layout.xml - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = NO - -# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when -# a warning is encountered. -# The default value is: NO. - -WARN_AS_ERROR = NO - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# Configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag is used to specify the files and/or directories that contain -# documented source files. You may enter file names like myfile.cpp or -# directories like /usr/src/myproject. Separate the files or directories with -# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING -# Note: If this tag is empty the current directory is searched. - -INPUT = $(INPUT) - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. -# -# Note that for custom extensions or not directly supported extensions you also -# need to set EXTENSION_MAPPING for the extension otherwise the files are not -# read by doxygen. -# -# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, -# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl, -# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js. - -FILE_PATTERNS = *.md *.c *.h *.cpp *.hpp *.def *.inc *.S *.dox *.api - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = $(EXCLUDE) - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = YES - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories for example use the pattern */test/* - -EXCLUDE_PATTERNS = */test/* *_test.c test_*.c - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* - -EXCLUDE_SYMBOLS = _ _* - -# The EXAMPLE_PATH tag can be used to specify one or more files or directories -# that contain example code fragments that are included (see the \include -# command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank all -# files are included. - -EXAMPLE_PATTERNS = *.c *.h - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude commands -# irrespective of the value of the RECURSIVE tag. -# The default value is: NO. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or directories -# that contain images that are to be included in the documentation (see the -# \image command). - -IMAGE_PATH = $(ROOT)/doxygen/assets \ - $(ROOT)/extras/libmemif/docs - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# <filter> <input-file> -# -# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. -# -# Note that for custom extensions or not directly supported extensions you also -# need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. -# -# Note that for custom extensions or not directly supported extensions you also -# need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. - -FILTER_PATTERNS = \ - *.c=$(ROOT)/doxygen/filter_c.py \ - *.h=$(ROOT)/doxygen/filter_h.py \ - *.api=$(ROOT)/doxygen/filter_api.py - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - -# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page -# (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. - -USE_MDFILE_AS_MAINPAGE = $(ROOT)/README.md - -#--------------------------------------------------------------------------- -# Configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will be -# generated. Documented entities will be cross-referenced with these sources. -# -# Note: To get rid of all source code in the generated output, make sure that -# also VERBATIM_HEADERS is set to NO. -# The default value is: NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = NO - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = YES - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = YES - -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse-libclang=ON option for CMake. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in -# which the alphabetical index list will be split. -# Minimum value: 1, maximum value: 20, default value: 5. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefore more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = $(ROOT)/doxygen/assets/doxy-vpp.css - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 230 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 255 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to YES can help to show when doxygen was last run and thus if the -# documentation is up to date. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_DYNAMIC_SECTIONS = YES - -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "FD.io VPP" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = io.fd.vpp - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated -# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = io.fd.vpp - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = YES - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = io.fd.vpp - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = YES - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use <access key> + S -# (what the <access key> is depends on the OS and browser, but it is typically -# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down -# key> to jump into the search results window, the results can be navigated -# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel -# the search. The filter options can be selected when the cursor is inside the -# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> -# to select a filter and <Enter> or <escape> to activate or cancel the filter -# option. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a web server instead of a web client using Javascript. There -# are two flavors of web server based searching depending on the EXTERNAL_SEARCH -# setting. When disabled, doxygen will generate a PHP script for searching and -# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing -# and searching needs to be provided by external tools. See the section -# "External Indexing and Searching" for details. -# The default value is: NO. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SERVER_BASED_SEARCH = NO - -# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP -# script for searching. Instead the search results are written to an XML file -# which needs to be processed by an external indexer. Doxygen will invoke an -# external search engine pointed to by the SEARCHENGINE_URL option to obtain the -# search results. -# -# Doxygen ships with an example indexer (doxyindexer) and search engine -# (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). -# -# See the section "External Indexing and Searching" for details. -# The default value is: NO. -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTERNAL_SEARCH = NO - -# The SEARCHENGINE_URL should point to a search engine hosted by a web server -# which will return the search results when EXTERNAL_SEARCH is enabled. -# -# Doxygen ships with an example indexer (doxyindexer) and search engine -# (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and -# Searching" for details. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SEARCHENGINE_URL = - -# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed -# search data is written to a file for indexing by an external tool. With the -# SEARCHDATA_FILE tag the name of this file can be specified. -# The default file is: searchdata.xml. -# This tag requires that the tag SEARCHENGINE is set to YES. - -SEARCHDATA_FILE = searchdata.xml - -# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the -# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is -# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple -# projects and redirect the results back to the right project. -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTERNAL_SEARCH_ID = - -# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen -# projects other than the one defined by this configuration file, but that are -# all added to the same external search index. Each project needs to have a -# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of -# to a relative location where the documentation can be found. The format is: -# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... -# This tag requires that the tag SEARCHENGINE is set to YES. - -EXTRA_SEARCH_MAPPINGS = - -#--------------------------------------------------------------------------- -# Configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. -# The default value is: YES. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: latex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. -# -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate -# index for LaTeX. -# The default file is: makeindex. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX -# documents. This may be useful for small projects and may help to save some -# trees in general. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used by the -# printer. -# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x -# 14 inches) and executive (7.25 x 10.5 inches). -# The default value is: a4. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -PAPER_TYPE = a4 - -# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. The package can be specified just -# by its name or with the correct syntax as to be used with the LaTeX -# \usepackage command. To get the times font for instance you can specify : -# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} -# To use the option intlimits with the amsmath package you can specify: -# EXTRA_PACKAGES=[intlimits]{amsmath} -# If left blank no extra packages will be included. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. -# -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See -# LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_FOOTER = - -# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# LaTeX style sheets that are included after the standard style sheets created -# by doxygen. Using this option one can overrule certain style aspects. Doxygen -# will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_EXTRA_STYLESHEET = - -# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the LATEX_OUTPUT output -# directory. Note that the files will be copied as-is; there are no commands or -# markers available. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_EXTRA_FILES = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is -# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will -# contain links (just like the HTML output) instead of page references. This -# makes the output suitable for online browsing using a PDF viewer. -# The default value is: YES. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES, to get a -# higher quality PDF documentation. -# The default value is: YES. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode -# command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_BATCHMODE = NO - -# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the -# index chapters (such as File Index, Compound Index, etc.) in the output. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_HIDE_INDICES = NO - -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. -# The default value is: plain. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_BIB_STYLE = plain - -# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_TIMESTAMP = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The -# RTF output is optimized for Word 97 and may not look too pretty with other RTF -# readers/editors. -# The default value is: NO. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: rtf. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF -# documents. This may be useful for small projects and may help to save some -# trees in general. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will -# contain hyperlink fields. The RTF file will contain links (just like the HTML -# output) instead of page references. This makes the output suitable for online -# browsing using Word or some other Word compatible readers that support those -# fields. -# -# Note: WordPad (write) and others do not support links. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. -# -# See also section "Doxygen usage" for information on how to generate the -# default style sheet that doxygen normally uses. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_EXTENSIONS_FILE = - -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for -# classes and files. -# The default value is: NO. - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. A directory man3 will be created inside the directory specified by -# MAN_OUTPUT. -# The default directory is: man. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to the generated -# man pages. In case the manual section does not start with a number, the number -# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is -# optional. -# The default value is: .3. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_EXTENSION = .3 - -# The MAN_SUBDIR tag determines the name of the directory created within -# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by -# MAN_EXTENSION with the initial . removed. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_SUBDIR = - -# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it -# will generate one additional man file for each entity documented in the real -# man page(s). These additional files only source the real man page, but without -# them the man command would be unable to find the correct page. -# The default value is: NO. -# This tag requires that the tag GENERATE_MAN is set to YES. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that -# captures the structure of the code including all documentation. -# The default value is: NO. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: xml. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_OUTPUT = xml - -# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program -# listings (including syntax highlighting and cross-referencing information) to -# the XML output. Note that enabling this will significantly increase the size -# of the XML output. -# The default value is: YES. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# Configuration options related to the DOCBOOK output -#--------------------------------------------------------------------------- - -# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files -# that can be used to generate PDF. -# The default value is: NO. - -GENERATE_DOCBOOK = NO - -# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in -# front of it. -# The default directory is: docbook. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_OUTPUT = docbook - -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - -#--------------------------------------------------------------------------- -# Configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. -# The default value is: NO. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module -# file that captures the structure of the code including all documentation. -# -# Note that this feature is still experimental and incomplete at the moment. -# The default value is: NO. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary -# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI -# output from the Perl module output. -# The default value is: NO. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely -# formatted so it can be parsed by a human reader. This is useful if you want to -# understand what is going on. On the other hand, if this tag is set to NO, the -# size of the Perl module output will be much smaller and Perl will parse it -# just the same. -# The default value is: YES. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file are -# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful -# so different doxyrules.make files included by the same Makefile don't -# overwrite each other's variables. -# This tag requires that the tag GENERATE_PERLMOD is set to YES. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all -# C-preprocessor directives found in the sources and include files. -# The default value is: YES. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names -# in the source code. If set to NO, only conditional compilation will be -# performed. Macro expansion can be done in a controlled way by setting -# EXPAND_ONLY_PREDEF to YES. -# The default value is: NO. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -MACRO_EXPANSION = YES - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then -# the macro expansion is limited to the macros specified with the PREDEFINED and -# EXPAND_AS_DEFINED tags. -# The default value is: NO. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -EXPAND_ONLY_PREDEF = YES - -# If the SEARCH_INCLUDES tag is set to YES, the include files in the -# INCLUDE_PATH will be searched if a #include is found. -# The default value is: YES. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by the -# preprocessor. -# This tag requires that the tag SEARCH_INCLUDES is set to YES. - -INCLUDE_PATH = $(INCLUDE_PATH) - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will be -# used. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -INCLUDE_FILE_PATTERNS = *.h *.def - -# The PREDEFINED tag can be used to specify one or more macro names that are -# defined before the preprocessor is started (similar to the -D option of e.g. -# gcc). The argument of the tag is a list of macros of the form: name or -# name=definition (no spaces). If the definition and the "=" are omitted, "=1" -# is assumed. To prevent a macro definition from being undefined via #undef or -# recursively expanded use the := operator instead of the = operator. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -PREDEFINED = \ - _DOXYGEN _DPDK CLIB_DEBUG CLIB_UNIX __attribute__(x)= \ - __x86_64__ __X86_64__ __linux__ __LINUX__ __64BIT__ __64bit__ \ - __ORDER_LITTLE_ENDIAN__=1234 \ - __BYTE_ORDER__=1234 \ - __FLOAT_WORD_ORDER__=1234 \ - DPDK=1 \ - always_inline:="static inline" - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this -# tag can be used to specify a list of macro names that should be expanded. The -# macro definition that is found in the sources will be used. Use the PREDEFINED -# tag if you want to use a different macro definition that overrules the -# definition found in the source code. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all references to function-like macros that are alone on a line, have -# an all uppercase name, and do not end with a semicolon. Such function macros -# are typically used for boiler-plate code, and will confuse the parser if not -# removed. -# The default value is: YES. -# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration options related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES tag can be used to specify one or more tag files. For each tag -# file the location of the external documentation should be added. The format of -# a tag file without this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where loc1 and loc2 can be relative or absolute paths or URLs. See the -# section "Linking to external documentation" for more information about the use -# of tag files. -# Note: Each tag file must have a unique name (where the name does NOT include -# the path). If a tag file is not located in the directory in which doxygen is -# run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create a -# tag file that is based on the input files it reads. See section "Linking to -# external documentation" for more information about the usage of tag files. - -GENERATE_TAGFILE = $(BUILD_ROOT)/docs/html/vpp.doxytags - -# If the ALLEXTERNALS tag is set to YES, all external class will be listed in -# the class index. If set to NO, only the inherited external classes will be -# listed. -# The default value is: NO. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will be -# listed. -# The default value is: YES. - -EXTERNAL_GROUPS = YES - -# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in -# the related pages index. If set to NO, only the current project's pages will -# be listed. -# The default value is: YES. - -EXTERNAL_PAGES = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. - -DIA_PATH = - -# If set to YES the inheritance and collaboration graphs will hide inheritance -# and usage relations if the target is undocumented or is not a class. -# The default value is: YES. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz (see: -# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent -# Bell Labs. The other options in this section have no effect if this option is -# set to NO -# The default value is: YES. - -HAVE_DOT = YES - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed -# to run in parallel. When set to 0 doxygen will base this on the number of -# processors available in the system. You can set it explicitly to a value -# larger than 0 to get control over the balance between CPU load and processing -# speed. -# Minimum value: 0, maximum value: 32, default value: 0. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_NUM_THREADS = 0 - -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTNAME = Helvetica - -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_FONTPATH = - -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a -# graph for each documented class showing the direct and indirect implementation -# dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -UML_LOOK = NO - -# If the UML_LOOK tag is enabled, the fields and methods are shown inside the -# class node. If there are many fields or methods and many nodes the graph may -# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the -# number of items for each type to make the size more manageable. Set this to 0 -# for no limit. Note that the threshold may be exceeded by 50% before the limit -# is enforced. So when you set the threshold to 10, up to 15 fields may appear, -# but if the number exceeds 15, the total amount of fields shown is limited to -# 10. -# Minimum value: 0, maximum value: 100, default value: 10. -# This tag requires that the tag HAVE_DOT is set to YES. - -UML_LIMIT_NUM_FIELDS = 10 - -# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and -# collaboration graphs will show the relations between templates and their -# instances. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -TEMPLATE_RELATIONS = NO - -# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to -# YES then doxygen will generate a graph for each documented file showing the -# direct and indirect include dependencies of the file with other documented -# files. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -INCLUDE_GRAPH = YES - -# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are -# set to YES then doxygen will generate a graph for each documented file showing -# the direct and indirect include dependencies of the file with other documented -# files. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH tag is set to YES then doxygen will generate a call -# dependency graph for every global function or class method. -# -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. Disabling a call graph can be -# accomplished by means of the command \hidecallgraph. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller -# dependency graph for every global function or class method. -# -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. Disabling a caller graph can be -# accomplished by means of the command \hidecallergraph. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -CALLER_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical -# hierarchy of all classes instead of a textual one. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the -# dependencies a directory has on other directories in a graphical way. The -# dependency relations are determined by the #include relations between the -# files in the directories. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. For an explanation of the image formats see the section -# output formats in the documentation of the dot tool (Graphviz (see: -# http://www.graphviz.org/)). -# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order -# to make the SVG files visible in IE 9+ (other browsers do not have this -# requirement). -# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, -# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, -# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and -# png:gdiplus:gdiplus. -# The default value is: png. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_IMAGE_FORMAT = svg - -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# -# Note that this requires a modern browser other than Internet Explorer. Tested -# and working are Firefox, Chrome, Safari, and Opera. -# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make -# the SVG files visible. Older versions of IE do not have SVG support. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -INTERACTIVE_SVG = YES - -# The DOT_PATH tag can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the \dotfile -# command). -# This tag requires that the tag HAVE_DOT is set to YES. - -DOTFILE_DIRS = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). - -MSCFILE_DIRS = - -# The DIAFILE_DIRS tag can be used to specify one or more directories that -# contain dia files that are included in the documentation (see the \diafile -# command). - -DIAFILE_DIRS = - -# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. - -PLANTUML_JAR_PATH = - -# When using plantuml, the specified paths are searched for files specified by -# the !include statement in a plantuml block. - -PLANTUML_INCLUDE_PATH = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes -# that will be shown in the graph. If the number of nodes in a graph becomes -# larger than this value, doxygen will truncate the graph, which is visualized -# by representing a node as a red box. Note that doxygen if the number of direct -# children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that -# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. -# Minimum value: 0, maximum value: 10000, default value: 50. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs -# generated by dot. A depth value of 3 means that only nodes reachable from the -# root by following a path via at most 3 edges will be shown. Nodes that lay -# further from the root node will be omitted. Note that setting this option to 1 -# or 2 may greatly reduce the computation time needed for large code bases. Also -# note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. -# Minimum value: 0, maximum value: 1000, default value: 0. -# This tag requires that the tag HAVE_DOT is set to YES. - -MAX_DOT_GRAPH_DEPTH = 3 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) support -# this, this feature is disabled by default. -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page -# explaining the meaning of the various boxes and arrows in the dot generated -# graphs. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot -# files that are used to generate the various graphs. -# The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_CLEANUP = YES - diff --git a/doxygen/filter_api.py b/doxygen/filter_api.py deleted file mode 100755 index 484881439b8..00000000000 --- a/doxygen/filter_api.py +++ /dev/null @@ -1,49 +0,0 @@ -#!/usr/bin/env python3 -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Filter for vpe.api to make it Doxygenish. - -import re -import sys - -if len(sys.argv) < 2: - sys.stderr.write("Usage: %s <filename>\n" % (sys.argv[0])) - sys.exit(1) - -patterns = [ - # Search for "define" blocks and treat them as structs - (re.compile(r"^.*(manual_.[^\s]+\s+)?define\s+(?P<name>[^\s]+)"), - r"typedef struct vl_api_\g<name>_t"), - - # For every "brief" statement at the start of a comment block, add an - # xref with whatever is on the same line. This gives us an index page - # with all the API methods in one place. - # XXX Commented out for now; works but duplicates the brief text in the - # struct documentation - # (re.compile(r"/\*\*\s*(?P<b>[\\@]brief)\s+(?P<c>.+)(\*/)$"), - # r'/** @xrefitem api "" "VPP API" \g<c> \g<b> \g<c>'), # capture inline comment close - # (re.compile(r"/\*\*\s*(?P<b>[\\@]brief)\s+(?P<c>.+)$"), - # r'/** @xrefitem api "" "VPP API" \g<c> \g<b> \g<c>'), - - # Since structs don't have params, replace @param with @tparam - ( re.compile("[\\@]param\\b"), "@tparam"), -] - -with open(sys.argv[1]) as fd: - for line in fd: - str = line[:-1] # strip \n - for p in patterns: - str = p[0].sub(p[1], str) - sys.stdout.write(str+"\n") diff --git a/doxygen/filter_c.py b/doxygen/filter_c.py deleted file mode 100755 index 897f9f6d0b3..00000000000 --- a/doxygen/filter_c.py +++ /dev/null @@ -1,87 +0,0 @@ -#!/usr/bin/env python3 -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Filter for .c files to make various preprocessor tricks Doxygenish - -import os, sys, re - -if len(sys.argv) < 2: - sys.stderr.write("Usage: %s <filename>\n" % (sys.argv[0])) - sys.exit(1) - -replace_patterns = [ - # Search for VLIB_CLI_COMMAND, extract its parameters and add a docblock for it - ( re.compile("(?P<m>VLIB_CLI_COMMAND)\s*[(](?P<name>[a-zA-Z0-9_]+)[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>) */ vlib_cli_command_t \g<name>"), - ( re.compile("(?P<m>VLIB_CLI_COMMAND)\s*[(](?P<name>[a-zA-Z0-9_]+),\s*(?P<qual>[^)]*)[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>) */ \g<qual> vlib_cli_command_t \g<name>"), - - # Search for VLIB_REGISTER_NODE, extract its parameters and add a docblock for it - ( re.compile("(?P<m>VLIB_REGISTER_NODE)\s*[(](?P<name>[a-zA-Z0-9_]+)[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>) */ vlib_node_registration_t \g<name>"), - ( re.compile("(?P<m>VLIB_REGISTER_NODE)\s*[(](?P<name>[a-zA-Z0-9_]+),\s*(?P<qual>[^)]*)[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>) */ \g<qual> vlib_node_registration_t \g<name>"), - - # Search for VLIB_INIT_FUNCTION, extract its parameter and add a docblock for it - ( re.compile("(?P<m>VLIB_INIT_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+)[)]"), - r"/** @brief (@em constructor) \g<m> (@ref \g<name>) */ vlib_init_function_t * _vlib_init_function_\g<name>"), - ( re.compile("(?P<m>VLIB_DECLARE_INIT_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+)[)]"), - r"/** @brief (@em constructor) \g<m> (@ref \g<name>) */ vlib_init_function_t * _vlib_init_function_\g<name>"), - - # Search for VLIB_LOOP_ENTER_FUNCTION, extract the parameters and add a docblock for it - ( re.compile("(?P<m>VLIB_MAIN_LOOP_ENTER_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+)(,[^)]*)?[)]"), - r"/** @brief (@em constructor) \g<m> (@ref \g<name>) */ _vlib_main_loop_enter_\g<name>"), - ( re.compile("(?P<m>VLIB_MAIN_LOOP_EXIT_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+)(,[^)]*)?[)]"), - r"/** @brief (@em constructor) \g<m> (@ref \g<name>) */ _vlib_main_loop_exit_\g<name>"), - - # Search for VLIB_CONFIG_FUNCTION, extract the parameters and add a docblock for it - ( re.compile("(?P<m>VLIB_CONFIG_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+),\s*(?P<n>\"[^\"]+\")(,[^)]*)?[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>, \g<n>) */ vlib_config_function_runtime_t _vlib_config_function_\g<name>"), - ( re.compile("(?P<m>VLIB_EARLY_CONFIG_FUNCTION)\s*[(](?P<name>[a-zA-Z0-9_]+),\s*(?P<n>\"[^\"]+\")(,[^)]*)?[)]"), - r"/** @brief (@em constructor) \g<m> (\g<name>, \g<n>) */ vlib_config_function_runtime_t _vlib_config_function_\g<name>"), - - # Search for "format_thing" and "unformat_thing" when used as a function pointer and add parens - ( re.compile("(?P<pre>(^|,)\s*)(?P<name>(un)?format_[a-zA-Z0-9_]+)(?P<post>\s*(,|$))"), - r"\g<pre>\g<name>()\g<post>" ), - - # Search for CLIB_PAD_FROM_TO(...); and replace with padding - # #define CLIB_PAD_FROM_TO(from,to) u8 pad_##from[(to) - (from)] - ( re.compile("(?P<m>CLIB_PAD_FROM_TO)\s*[(](?P<from>[^,]+),\s*(?P<to>[^)]+)[)]"), - r"/** Padding. */ u8 pad_\g<from>[(\g<to>) - (\g<from>)]" ), - -] - - -filename = sys.argv[1] -cwd = os.getcwd() -if filename[0:len(cwd)] == cwd: - filename = filename[len(cwd):] - if filename[0] == "/": - filename = filename[1:] - -with open(filename) as fd: - line_num = 0 - - for line in fd: - line_num += 1 - str = line[:-1] # filter \n - - # Look for search/replace patterns - for p in replace_patterns: - str = p[0].sub(p[1], str) - - sys.stdout.write(str+"\n") - -# All done diff --git a/doxygen/filter_h.py b/doxygen/filter_h.py deleted file mode 100755 index 0891fa708e1..00000000000 --- a/doxygen/filter_h.py +++ /dev/null @@ -1,56 +0,0 @@ -#!/usr/bin/env python3 -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Filter for .c files to make various preprocessor tricks Doxygenish - -import os -import re -import sys - -if len(sys.argv) < 2: - sys.stderr.write("Usage: %s <filename>\n" % (sys.argv[0])) - sys.exit(1) - -replace_patterns = [ - # Search for CLIB_PAD_FROM_TO(...); and replace with padding - # #define CLIB_PAD_FROM_TO(from,to) u8 pad_##from[(to) - (from)] - (re.compile(r"(?P<m>CLIB_PAD_FROM_TO)\s*[(](?P<from>[^,]+)," - r"\s*(?P<to>[^)]+)[)]"), - r"/** Padding. */ u8 pad_\g<from>[(\g<to>) - (\g<from>)]"), - -] - - -filename = sys.argv[1] -cwd = os.getcwd() -if filename[0:len(cwd)] == cwd: - filename = filename[len(cwd):] - if filename[0] == "/": - filename = filename[1:] - -with open(filename) as fd: - line_num = 0 - - for line in fd: - line_num += 1 - str = line[:-1] # filter \n - - # Look for search/replace patterns - for p in replace_patterns: - str = p[0].sub(p[1], str) - - sys.stdout.write(str+"\n") - -# All done diff --git a/doxygen/layout.xml b/doxygen/layout.xml deleted file mode 100644 index e91f4dab888..00000000000 --- a/doxygen/layout.xml +++ /dev/null @@ -1,194 +0,0 @@ -<doxygenlayout version="1.0"> - <!-- Generated by doxygen 1.8.11 --> - <!-- Navigation index tabs for HTML output --> - <navindex> - <tab type="mainpage" visible="yes" title=""/> - <tab type="pages" visible="yes" title="" intro=""/> - <tab type="modules" visible="yes" title="" intro=""/> - <tab type="namespaces" visible="yes" title=""> - <tab type="namespacelist" visible="yes" title="" intro=""/> - <tab type="namespacemembers" visible="yes" title="" intro=""/> - </tab> - <tab type="classes" visible="yes" title=""> - <tab type="classlist" visible="yes" title="" intro=""/> - <tab type="classindex" visible="$ALPHABETICAL_INDEX" title=""/> - <tab type="hierarchy" visible="yes" title="" intro=""/> - <tab type="classmembers" visible="yes" title="" intro=""/> - </tab> - <tab type="files" visible="yes" title="Source"> - <tab type="filelist" visible="yes" title="Files" intro=""/> - <tab type="globals" visible="yes" title="Symbols" intro=""/> - </tab> - <tab type="examples" visible="yes" title="" intro=""/> - </navindex> - - <!-- Layout definition for a class page --> - <class> - <briefdescription visible="yes"/> - <includes visible="$SHOW_INCLUDE_FILES"/> - <inheritancegraph visible="$CLASS_GRAPH"/> - <collaborationgraph visible="$COLLABORATION_GRAPH"/> - <memberdecl> - <nestedclasses visible="yes" title=""/> - <publictypes title=""/> - <services title=""/> - <interfaces title=""/> - <publicslots title=""/> - <signals title=""/> - <publicmethods title=""/> - <publicstaticmethods title=""/> - <publicattributes title=""/> - <publicstaticattributes title=""/> - <protectedtypes title=""/> - <protectedslots title=""/> - <protectedmethods title=""/> - <protectedstaticmethods title=""/> - <protectedattributes title=""/> - <protectedstaticattributes title=""/> - <packagetypes title=""/> - <packagemethods title=""/> - <packagestaticmethods title=""/> - <packageattributes title=""/> - <packagestaticattributes title=""/> - <properties title=""/> - <events title=""/> - <privatetypes title=""/> - <privateslots title=""/> - <privatemethods title=""/> - <privatestaticmethods title=""/> - <privateattributes title=""/> - <privatestaticattributes title=""/> - <friends title=""/> - <related title="" subtitle=""/> - <membergroups visible="yes"/> - </memberdecl> - <detaileddescription title=""/> - <memberdef> - <inlineclasses title=""/> - <typedefs title=""/> - <enums title=""/> - <services title=""/> - <interfaces title=""/> - <constructors title=""/> - <functions title=""/> - <related title=""/> - <variables title=""/> - <properties title=""/> - <events title=""/> - </memberdef> - <allmemberslink visible="yes"/> - <usedfiles visible="$SHOW_USED_FILES"/> - <authorsection visible="yes"/> - </class> - - <!-- Layout definition for a namespace page --> - <namespace> - <briefdescription visible="yes"/> - <memberdecl> - <nestednamespaces visible="yes" title=""/> - <constantgroups visible="yes" title=""/> - <classes visible="yes" title=""/> - <typedefs title=""/> - <enums title=""/> - <functions title=""/> - <variables title=""/> - <membergroups visible="yes"/> - </memberdecl> - <detaileddescription title=""/> - <memberdef> - <inlineclasses title=""/> - <typedefs title=""/> - <enums title=""/> - <functions title=""/> - <variables title=""/> - </memberdef> - <authorsection visible="yes"/> - </namespace> - - <!-- Layout definition for a file page --> - <file> - <briefdescription visible="yes"/> - <includes visible="$SHOW_INCLUDE_FILES"/> - <includegraph visible="$INCLUDE_GRAPH"/> - <includedbygraph visible="$INCLUDED_BY_GRAPH"/> - <sourcelink visible="yes"/> - <memberdecl> - <classes visible="yes" title=""/> - <namespaces visible="yes" title=""/> - <constantgroups visible="yes" title=""/> - <defines title=""/> - <typedefs title=""/> - <enums title=""/> - <functions title=""/> - <variables title=""/> - <membergroups visible="yes"/> - </memberdecl> - <detaileddescription title=""/> - <memberdef> - <inlineclasses title=""/> - <defines title=""/> - <typedefs title=""/> - <enums title=""/> - <functions title=""/> - <variables title=""/> - </memberdef> - <authorsection/> - </file> - - <!-- Layout definition for a group page --> - <group> - <briefdescription visible="yes"/> - <groupgraph visible="$GROUP_GRAPHS"/> - <memberdecl> - <nestedgroups visible="yes" title=""/> - <dirs visible="yes" title=""/> - <files visible="yes" title=""/> - <namespaces visible="yes" title=""/> - <classes visible="yes" title=""/> - <defines title=""/> - <typedefs title=""/> - <enums title=""/> - <enumvalues title=""/> - <functions title=""/> - <variables title=""/> - <signals title=""/> - <publicslots title=""/> - <protectedslots title=""/> - <privateslots title=""/> - <events title=""/> - <properties title=""/> - <friends title=""/> - <membergroups visible="yes"/> - </memberdecl> - <detaileddescription title=""/> - <memberdef> - <pagedocs/> - <inlineclasses title=""/> - <defines title=""/> - <typedefs title=""/> - <enums title=""/> - <enumvalues title=""/> - <functions title=""/> - <variables title=""/> - <signals title=""/> - <publicslots title=""/> - <protectedslots title=""/> - <privateslots title=""/> - <events title=""/> - <properties title=""/> - <friends title=""/> - </memberdef> - <authorsection visible="yes"/> - </group> - - <!-- Layout definition for a directory page --> - <directory> - <briefdescription visible="yes"/> - <directorygraph visible="yes"/> - <memberdecl> - <dirs visible="yes"/> - <files visible="yes"/> - </memberdecl> - <detaileddescription title=""/> - </directory> -</doxygenlayout> diff --git a/doxygen/siphon-generate b/doxygen/siphon-generate deleted file mode 100755 index 9b69c52cf17..00000000000 --- a/doxygen/siphon-generate +++ /dev/null @@ -1,79 +0,0 @@ -#!/usr/bin/env python3 -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Looks for preprocessor macros with struct initializers and siphons them -# off into another file for later parsing; ostensibly to generate -# documentation from struct initializer data. - -import argparse -import logging -import os - -import siphon - -DEFAULT_LOGFILE = None -DEFAULT_LOGLEVEL = "info" -DEFAULT_OUTPUT = "build-root/docs/siphons" -DEFAULT_PREFIX = os.getcwd() - -ap = argparse.ArgumentParser() -ap.add_argument("--log-file", default=DEFAULT_LOGFILE, - help="Log file [%s]" % DEFAULT_LOGFILE) -ap.add_argument("--log-level", default=DEFAULT_LOGLEVEL, - choices=["debug", "info", "warning", "error", "critical"], - help="Logging level [%s]" % DEFAULT_LOGLEVEL) - -ap.add_argument("--output", '-o', metavar="directory", default=DEFAULT_OUTPUT, - help="Output directory for .siphon files [%s]" % - DEFAULT_OUTPUT) -ap.add_argument("--input-prefix", metavar="path", default=DEFAULT_PREFIX, - help="Prefix to strip from input pathnames [%s]" % - DEFAULT_PREFIX) -ap.add_argument("input", nargs='+', metavar="input_file", - help="Input C source files") -args = ap.parse_args() - -logging.basicConfig(filename=args.log_file, - level=getattr(logging, args.log_level.upper(), None)) -log = logging.getLogger("siphon_generate") - - -generate = siphon.generate.Generate(output_directory=args.output, - input_prefix=args.input_prefix) - -# Pre-process file names in case they indicate a file with -# a list of files -files = [] -for filename in args.input: - if filename.startswith('@'): - with open(filename[1:], 'r') as fp: - lines = fp.readlines() - for line in lines: - file = line.strip() - if file not in files: - files.append(file) - lines = None - else: - if filename not in files: - files.append(filename) - -# Iterate all the input files we've been given -for filename in files: - generate.parse(filename) - -# Write the extracted data -generate.deliver() - -# All done diff --git a/doxygen/siphon-process b/doxygen/siphon-process deleted file mode 100755 index 411bf72f0f0..00000000000 --- a/doxygen/siphon-process +++ /dev/null @@ -1,77 +0,0 @@ -#!/usr/bin/env python3 -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Filter for .siphon files that are generated by other filters. -# The idea is to siphon off certain initializers so that we can better -# auto-document the contents of that initializer. - -import argparse -import logging -import os -import sys - -import siphon - -DEFAULT_LOGFILE = None -DEFAULT_LOGLEVEL = "info" -DEFAULT_SIPHON = "clicmd" -DEFAULT_FORMAT = "markdown" -DEFAULT_OUTPUT = None -DEFAULT_TEMPLATES = os.path.dirname(__file__) + "/siphon_templates" - -ap = argparse.ArgumentParser() -ap.add_argument("--log-file", default=DEFAULT_LOGFILE, - help="Log file [%s]" % DEFAULT_LOGFILE) -ap.add_argument("--log-level", default=DEFAULT_LOGLEVEL, - choices=["debug", "info", "warning", "error", "critical"], - help="Logging level [%s]" % DEFAULT_LOGLEVEL) - -ap.add_argument("--type", '-t', metavar="siphon_type", default=DEFAULT_SIPHON, - choices=siphon.process.siphons.keys(), - help="Siphon type to process [%s]" % DEFAULT_SIPHON) -ap.add_argument("--format", '-f', default=DEFAULT_FORMAT, - choices=siphon.process.formats.keys(), - help="Output format to generate [%s]" % DEFAULT_FORMAT) -ap.add_argument("--output", '-o', metavar="file", default=DEFAULT_OUTPUT, - help="Output file (uses stdout if not defined) [%s]" % - DEFAULT_OUTPUT) -ap.add_argument("--templates", metavar="directory", default=DEFAULT_TEMPLATES, - help="Path to render templates directory [%s]" % - DEFAULT_TEMPLATES) -ap.add_argument("input", nargs='+', metavar="input_file", - help="Input .siphon files") -args = ap.parse_args() - -logging.basicConfig(filename=args.log_file, - level=getattr(logging, args.log_level.upper(), None)) -log = logging.getLogger("siphon_process") - -# Determine where to send the generated output -if args.output is None: - out = sys.stdout -else: - out = open(args.output, "w+") - -# Get our processor -klass = siphon.process.siphons[args.type] -processor = klass(template_directory=args.templates, format=args.format) - -# Load the input files -processor.load_json(args.input) - -# Process the data -processor.process(out=out) - -# All done diff --git a/doxygen/siphon/__init__.py b/doxygen/siphon/__init__.py deleted file mode 100644 index f6417314d82..00000000000 --- a/doxygen/siphon/__init__.py +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Siphon classes - -from . import generate -from . import generate_clicmd -from . import generate_syscfg - -from . import parsers -from . import process -from . import process_clicmd -from . import process_syscfg diff --git a/doxygen/siphon/generate.py b/doxygen/siphon/generate.py deleted file mode 100644 index 2ae5a1b6f1b..00000000000 --- a/doxygen/siphon/generate.py +++ /dev/null @@ -1,306 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Generate .siphon source fragments for later processing - -import json -import logging -import os -import re - -"""List of (regexp, siphon_name) tuples for matching the start of C - initializer blocks in source files. Each siphon class registers - themselves on this list.""" -siphon_patterns = [] - -class Generate(object): - """Matches a siphon comment block start""" - siphon_block_start = re.compile("^\s*/\*\?\s*(.*)$") - - """Matches a siphon comment block stop""" - siphon_block_stop = re.compile("^(.*)\s*\?\*/\s*$") - - """Siphon block directive delimiter""" - siphon_block_delimiter = "%%" - - """Matches a siphon block directive such as - '%clicmd:group_label Debug CLI%'""" - siphon_block_directive = re.compile("(%s)\s*([a-zA-Z0-9_:]+)\s+(.*)\s*(%s)" % \ - (siphon_block_delimiter, siphon_block_delimiter)) - - """Matches the start of an initializer block""" - siphon_initializer = re.compile("\s*=") - - """Collated output for each siphon""" - output = None - - """Directory prefix to strip from input filenames to keep things tidy.""" - input_prefix = None - - """List of known siphons""" - known_siphons = None - - """Logging handler""" - log = None - - - def __init__(self, output_directory, input_prefix): - super(Generate, self).__init__() - self.log = logging.getLogger("siphon.generate") - - # Build a list of known siphons - self.known_siphons = [] - for item in siphon_patterns: - siphon = item[1] - if siphon not in self.known_siphons: - self.known_siphons.append(siphon) - - # Setup information for siphons we know about - self.output = {} - for siphon in self.known_siphons: - self.output[siphon] = { - "file": "%s/%s.siphon" % (output_directory, siphon), - "global": {}, - "items": [], - } - - self.input_prefix = input_prefix - - - """ - count open and close braces in str - return (0, index) when braces were found and count becomes 0. - index indicates the position at which the last closing brace was - found. - return (-1, -1) if a closing brace is found before any opening one. - return (count, -1) if not all opening braces are closed, count is the - current depth - """ - def count_braces(self, str, count=0, found=False): - for index in range(0, len(str)): - if str[index] == '{': - count += 1; - found = True - elif str[index] == '}': - if count == 0: - # means we never found an open brace - return (-1, -1) - count -= 1; - - if count == 0 and found: - return (count, index) - - return (count, -1) - - def parse(self, filename): - # Strip the current directory off the start of the - # filename for brevity - if filename[0:len(self.input_prefix)] == self.input_prefix: - filename = filename[len(self.input_prefix):] - if filename[0] == "/": - filename = filename[1:] - - # Work out the abbreviated directory name - directory = os.path.dirname(filename) - if directory[0:2] == "./": - directory = directory[2:] - elif directory[0:len(self.input_prefix)] == self.input_prefix: - directory = directory[len(self.input_prefix):] - if directory[0] == "/": - directory = directory[1:] - - # Open the file and explore its contents... - self.log.info("Siphoning from %s." % filename) - directives = {} - with open(filename) as fd: - siphon = None - close_siphon = None - siphon_block = "" - in_block = False - line_num = 0 - siphon_line = 0 - - for line in fd: - line_num += 1 - str = line[:-1] # filter \n - - """See if there is a block directive and if so extract it""" - def process_block_directive(str, directives): - m = self.siphon_block_directive.search(str) - if m is not None: - k = m.group(2) - v = m.group(3).strip() - directives[k] = v - # Return only the parts we did not match - return str[0:m.start(1)] + str[m.end(4):] - - return str - - def process_block_prefix(str): - if str.startswith(" * "): - str = str[3:] - elif str == " *": - str = "" - return str - - if not in_block: - # See if the line contains the start of a siphon doc block - m = self.siphon_block_start.search(str) - if m is not None: - in_block = True - t = m.group(1) - - # Now check if the block closes on the same line - m = self.siphon_block_stop.search(t) - if m is not None: - t = m.group(1) - in_block = False - - # Check for directives - t = process_block_directive(t, directives) - - # Filter for normal comment prefixes - t = process_block_prefix(t) - - # Add what is left - siphon_block += t - - # Skip to next line - continue - - else: - # Check to see if we have an end block marker - m = self.siphon_block_stop.search(str) - if m is not None: - in_block = False - t = m.group(1) - else: - t = str - - # Check for directives - t = process_block_directive(t, directives) - - # Filter for normal comment prefixes - t = process_block_prefix(t) - - # Add what is left - siphon_block += t + "\n" - - # Skip to next line - continue - - - if siphon is None: - # Look for blocks we need to siphon - for p in siphon_patterns: - if p[0].match(str): - siphon = [ p[1], str + "\n", 0 ] - siphon_line = line_num - - # see if we have an initializer - m = self.siphon_initializer.search(str) - if m is not None: - # count the braces on this line - (count, index) = \ - self.count_braces(str[m.start():]) - siphon[2] = count - # TODO - it's possible we have the - # initializer all on the first line - # we should check for it, but also - # account for the possibility that - # the open brace is on the next line - #if count == 0: - # # braces balanced - # close_siphon = siphon - # siphon = None - else: - # no initializer: close the siphon right now - close_siphon = siphon - siphon = None - else: - # See if we should end the siphon here - do we have - # balanced braces? - (count, index) = self.count_braces(str, - count=siphon[2], found=True) - if count == 0: - # braces balanced - add the substring and - # close the siphon - siphon[1] += str[:index+1] + ";\n" - close_siphon = siphon - siphon = None - else: - # add the whole string, move on - siphon[2] = count - siphon[1] += str + "\n" - - if close_siphon is not None: - # Write the siphoned contents to the right place - siphon_name = close_siphon[0] - - # Copy directives for the file - details = {} - for key in directives: - if ":" in key: - (sn, label) = key.split(":") - if sn == siphon_name: - details[label] = directives[key] - else: - details[key] = directives[key] - - # Copy details for this block - details['file'] = filename - details['directory'] = directory - details['line_start'] = siphon_line - details['line_end'] = line_num - details['siphon_block'] = siphon_block.strip() - details["block"] = close_siphon[1] - - # Store the item - self.output[siphon_name]['items'].append(details) - - # All done - close_siphon = None - siphon_block = "" - - # Update globals - for key in directives.keys(): - if ':' not in key: - continue - - if filename.endswith("/dir.dox"): - # very special! use the parent directory name - l = directory - else: - l = filename - - (sn, label) = key.split(":") - - if sn not in self.output: - self.output[sn] = {} - if 'global' not in self.output[sn]: - self.output[sn]['global'] = {} - if l not in self.output[sn]['global']: - self.output[sn]['global'][l] = {} - - self.output[sn]['global'][l][label] = directives[key] - - def deliver(self): - # Write out the data - for siphon in self.output.keys(): - self.log.info("Saving siphon data %s." % siphon) - s = self.output[siphon] - with open(s['file'], "a") as fp: - json.dump(s, fp, - separators=(',', ': '), indent=4, sort_keys=True) - diff --git a/doxygen/siphon/generate_clicmd.py b/doxygen/siphon/generate_clicmd.py deleted file mode 100644 index 6d24aaf4926..00000000000 --- a/doxygen/siphon/generate_clicmd.py +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -import re - -from . import generate - -# Register our regexp -generate.siphon_patterns.append(( - re.compile("(?P<m>VLIB_CLI_COMMAND)\s*" - "[(](?P<name>[a-zA-Z0-9_]+)(,[^)]*)?[)]"), - "clicmd" -)) diff --git a/doxygen/siphon/generate_syscfg.py b/doxygen/siphon/generate_syscfg.py deleted file mode 100644 index 52c802e5752..00000000000 --- a/doxygen/siphon/generate_syscfg.py +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -import re - -from . import generate - -# Register our regexp -generate.siphon_patterns.append(( - re.compile("(?P<m>VLIB_CONFIG_FUNCTION)\s*" - '[(](?P<fn>[a-zA-Z0-9_]+)\s*,\s*"(?P<name>[^"]*)"[)]'), - "syscfg" -)) diff --git a/doxygen/siphon/parsers.py b/doxygen/siphon/parsers.py deleted file mode 100644 index 162205de4ca..00000000000 --- a/doxygen/siphon/parsers.py +++ /dev/null @@ -1,150 +0,0 @@ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -import html -import pyparsing as pp - -# Some useful primitives -ident = pp.Word(pp.alphas + "_", pp.alphas + pp.nums + "_") -intNum = pp.Word(pp.nums) -hexNum = pp.Literal("0x") + pp.Word(pp.hexnums) -octalNum = pp.Literal("0") + pp.Word("01234567") -integer = (hexNum | octalNum | intNum) + \ - pp.Optional(pp.Literal("ULL") | pp.Literal("LL") | pp.Literal("L")) -floatNum = pp.Regex(r'\d+(\.\d*)?([eE]\d+)?') + pp.Optional(pp.Literal("f")) -char = pp.Literal("'") + pp.Word(pp.printables, exact=1) + pp.Literal("'") -arrayIndex = integer | ident - -lbracket = pp.Literal("(").suppress() -rbracket = pp.Literal(")").suppress() -lbrace = pp.Literal("{").suppress() -rbrace = pp.Literal("}").suppress() -comma = pp.Literal(",").suppress() -equals = pp.Literal("=").suppress() -dot = pp.Literal(".").suppress() -semicolon = pp.Literal(";").suppress() - -# initializer := { [member = ] (variable | expression | { initializer } ) } -typeName = ident -varName = ident -typeSpec = pp.Optional("unsigned") + \ - pp.oneOf("int long short float double char u8 i8 void") + \ - pp.Optional(pp.Word("*"), default="") -typeCast = pp.Combine( "(" + ( typeSpec | typeName ) + ")" ).suppress() - -string = pp.Combine(pp.OneOrMore(pp.QuotedString(quoteChar='"', - escChar='\\', multiline=True)), adjacent=False) -literal = pp.Optional(typeCast) + (integer | floatNum | char | string) -var = pp.Combine(pp.Optional(typeCast) + varName + - pp.Optional("[" + arrayIndex + "]")) - -# This could be more complete, but suffices for our uses -expr = (literal | var) - -"""Parse and render a block of text into a Python dictionary.""" -class Parser(object): - """Compiled PyParsing BNF""" - _parser = None - - def __init__(self): - super(Parser, self).__init__() - self._parser = self.BNF() - - def BNF(self): - raise NotImplementedError - - def item(self, item): - raise NotImplementedError - - def parse(self, input): - item = self._parser.parseString(input).asList() - return self.item(item) - - -"""Parser for function-like macros - without the closing semi-colon.""" -class ParserFunctionMacro(Parser): - def BNF(self): - # VLIB_CONFIG_FUNCTION (unix_config, "unix") - macroName = ident - params = pp.Group(pp.ZeroOrMore(expr + comma) + expr) - macroParams = lbracket + params + rbracket - - return macroName + macroParams - - def item(self, item): - r = { - "macro": item[0], - "name": item[1][1], - "function": item[1][0], - } - - return r - - -"""Parser for function-like macros with a closing semi-colon.""" -class ParseFunctionMacroStmt(ParserFunctionMacro): - def BNF(self): - # VLIB_CONFIG_FUNCTION (unix_config, "unix"); - function_macro = super(ParseFunctionMacroStmt, self).BNF() - mi = function_macro + semicolon - mi.ignore(pp.cppStyleComment) - - return mi - - -""" -Parser for our struct initializers which are composed from a -function-like macro, equals sign, and then a normal C struct initializer -block. -""" -class MacroInitializer(ParserFunctionMacro): - def BNF(self): - # VLIB_CLI_COMMAND (show_sr_tunnel_command, static) = { - # .path = "show sr tunnel", - # .short_help = "show sr tunnel [name <sr-tunnel-name>]", - # .function = show_sr_tunnel_fn, - # }; - cs = pp.Forward() - - - member = pp.Combine(dot + varName + pp.Optional("[" + arrayIndex + "]"), - adjacent=False) - value = (expr | cs) - - entry = pp.Group(pp.Optional(member + equals, default="") + value) - entries = (pp.ZeroOrMore(entry + comma) + entry + pp.Optional(comma)) | \ - (pp.ZeroOrMore(entry + comma)) - - cs << (lbrace + entries + rbrace) - - macroName = ident - params = pp.Group(pp.ZeroOrMore(expr + comma) + expr) - macroParams = lbracket + params + rbracket - - function_macro = super(MacroInitializer, self).BNF() - mi = function_macro + equals + pp.Group(cs) + semicolon - mi.ignore(pp.cppStyleComment) - - return mi - - def item(self, item): - r = { - "macro": item[0], - "name": item[1][0], - "params": item[2], - "value": {}, - } - - for param in item[2]: - r["value"][param[0]] = html.escape(param[1]) - - return r diff --git a/doxygen/siphon/process.py b/doxygen/siphon/process.py deleted file mode 100644 index ce70be5b399..00000000000 --- a/doxygen/siphon/process.py +++ /dev/null @@ -1,318 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Generation template class - -import html.parser -import json -import logging -import os -import sys - -import jinja2 - -# Classes register themselves in this dictionary -"""Mapping of known processors to their classes""" -siphons = {} - -"""Mapping of known output formats to their classes""" -formats = {} - - -class Siphon(object): - """Generate rendered output for siphoned data.""" - - # Set by subclasses - """Our siphon name""" - name = None - - # Set by subclasses - """Name of an identifier used by this siphon""" - identifier = None - - # Set by subclasses - """The pyparsing object to use to parse with""" - _parser = None - - """The input data""" - _cmds = None - - """Group key to (directory,file) mapping""" - _group = None - - """Logging handler""" - log = None - - """Directory to look for siphon rendering templates""" - template_directory = None - - """Template environment, if we're using templates""" - _tplenv = None - - def __init__(self, template_directory, format): - super(Siphon, self).__init__() - self.log = logging.getLogger("siphon.process.%s" % self.name) - - # Get our output format details - fmt_klass = formats[format] - fmt = fmt_klass() - self._format = fmt - - # Sort out the template search path - def _tpldir(name): - return os.sep.join((template_directory, fmt.name, name)) - - self.template_directory = template_directory - searchpath = [ - _tpldir(self.name), - _tpldir("default"), - ] - loader = jinja2.FileSystemLoader(searchpath=searchpath) - self._tplenv = jinja2.Environment( - loader=loader, - trim_blocks=True, - autoescape=True, - keep_trailing_newline=True) - - # Convenience, get a reference to the internal escape and - # unescape methods in html.parser. These then become - # available to templates to use, if needed. - self._h = html.parser.HTMLParser() - self.escape = html.escape - self.unescape = html.unescape - - # Output renderers - - """Returns an object to be used as the sorting key in the item index.""" - def index_sort_key(self, group): - return group - - """Returns a string to use as the header at the top of the item index.""" - def index_header(self): - return self.template("index_header") - - """Returns the string fragment to use for each section in the item - index.""" - def index_section(self, group): - return self.template("index_section", group=group) - - """Returns the string fragment to use for each entry in the item index.""" - def index_entry(self, meta, item): - return self.template("index_entry", meta=meta, item=item) - - """Returns an object, typically a string, to be used as the sorting key - for items within a section.""" - def item_sort_key(self, item): - return item['name'] - - """Returns a key for grouping items together.""" - def group_key(self, directory, file, macro, name): - _global = self._cmds['_global'] - - if file in _global and 'group_label' in _global[file]: - self._group[file] = (directory, file) - return file - - self._group[directory] = (directory, None) - return directory - - """Returns a key for identifying items within a grouping.""" - def item_key(self, directory, file, macro, name): - return name - - """Returns a string to use as the header when rendering the item.""" - def item_header(self, group): - return self.template("item_header", group=group) - - """Returns a string to use as the body when rendering the item.""" - def item_format(self, meta, item): - return self.template("item_format", meta=meta, item=item) - - """Returns a string to use as the label for the page reference.""" - def page_label(self, group): - return "_".join(( - self.name, - self.sanitize_label(group) - )) - - """Returns a title to use for a page.""" - def page_title(self, group): - _global = self._cmds['_global'] - (directory, file) = self._group[group] - - if file and file in _global and 'group_label' in _global[file]: - return _global[file]['group_label'] - - if directory in _global and 'group_label' in _global[directory]: - return _global[directory]['group_label'] - - return directory - - """Returns a string to use as the label for the section reference.""" - def item_label(self, group, item): - return "__".join(( - self.name, - item - )) - - """Label sanitizer; for creating Doxygen references""" - def sanitize_label(self, value): - return value.replace(" ", "_") \ - .replace("/", "_") \ - .replace(".", "_") - - """Template processor""" - def template(self, name, **kwargs): - tpl = self._tplenv.get_template(name + self._format.extension) - return tpl.render( - this=self, - **kwargs) - - # Processing methods - - """Parse the input file into a more usable dictionary structure.""" - def load_json(self, files): - self._cmds = {} - self._group = {} - - line_num = 0 - line_start = 0 - for filename in files: - filename = os.path.relpath(filename) - self.log.info("Parsing items in file \"%s\"." % filename) - data = None - with open(filename, "r") as fd: - data = json.load(fd) - - self._cmds['_global'] = data['global'] - - # iterate the items loaded and regroup it - for item in data["items"]: - try: - o = self._parser.parse(item['block']) - except Exception: - self.log.error("Exception parsing item: %s\n%s" - % (json.dumps(item, separators=(',', ': '), - indent=4), - item['block'])) - raise - - # Augment the item with metadata - o["meta"] = {} - for key in item: - if key == 'block': - continue - o['meta'][key] = item[key] - - # Load some interesting fields - directory = item['directory'] - file = item['file'] - macro = o["macro"] - name = o["name"] - - # Generate keys to group items by - group_key = self.group_key(directory, file, macro, name) - item_key = self.item_key(directory, file, macro, name) - - if group_key not in self._cmds: - self._cmds[group_key] = {} - - self._cmds[group_key][item_key] = o - - """Iterate over the input data, calling render methods to generate the - output.""" - def process(self, out=None): - - if out is None: - out = sys.stdout - - # Accumulated body contents - contents = "" - - # Write the header for this siphon type - out.write(self.index_header()) - - # Sort key helper for the index - def group_sort_key(group): - return self.index_sort_key(group) - - # Iterate the dictionary and process it - for group in sorted(self._cmds.keys(), key=group_sort_key): - if group.startswith('_'): - continue - - self.log.info("Processing items in group \"%s\" (%s)." % - (group, group_sort_key(group))) - - # Generate the section index entry (write it now) - out.write(self.index_section(group)) - - # Generate the item header (save for later) - contents += self.item_header(group) - - def item_sort_key(key): - return self.item_sort_key(self._cmds[group][key]) - - for key in sorted(self._cmds[group].keys(), key=item_sort_key): - self.log.debug("--- Processing key \"%s\" (%s)." % - (key, item_sort_key(key))) - - o = self._cmds[group][key] - meta = { - "directory": o['meta']['directory'], - "file": o['meta']['file'], - "macro": o['macro'], - "name": o['name'], - "key": key, - "label": self.item_label(group, key), - } - - # Generate the index entry for the item (write it now) - out.write(self.index_entry(meta, o)) - - # Generate the item itself (save for later) - contents += self.item_format(meta, o) - - # Deliver the accumulated body output - out.write(contents) - - -class Format(object): - """Output format class""" - - """Name of this output format""" - name = None - - """Expected file extension of templates that build this format""" - extension = None - - -class FormatMarkdown(Format): - """Markdown output format""" - name = "markdown" - extension = ".md" - - -# Register 'markdown' -formats["markdown"] = FormatMarkdown - - -class FormatItemlist(Format): - """Itemlist output format""" - name = "itemlist" - extension = ".itemlist" - - -# Register 'itemlist' -formats["itemlist"] = FormatItemlist diff --git a/doxygen/siphon/process_clicmd.py b/doxygen/siphon/process_clicmd.py deleted file mode 100644 index 231c7a7cfac..00000000000 --- a/doxygen/siphon/process_clicmd.py +++ /dev/null @@ -1,56 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Generate clicmd formatted output - -from . import process, parsers - - -class SiphonCLICMD(process.Siphon): - - name = "clicmd" - identifier = "VLIB_CLI_COMMAND" - - def __init__(self, *args, **kwargs): - super(SiphonCLICMD, self).__init__(*args, **kwargs) - self._parser = parsers.MacroInitializer() - - # Output renderers - - def index_sort_key(self, group): - _global = self._cmds['_global'] - if group not in self._group: - return group - (directory, file) = self._group[group] - - if file in _global and 'group_label' in _global[file]: - return _global[file]['group_label'] - - if directory in _global and 'group_label' in _global[directory]: - return _global[directory]['group_label'] - - return group - - def item_sort_key(self, item): - return item['value']['path'] - - def item_label(self, group, item): - return "_".join(( - self.name, - self.sanitize_label(self._cmds[group][item]['value']['path']) - )) - - -# Register our processor -process.siphons["clicmd"] = SiphonCLICMD diff --git a/doxygen/siphon/process_syscfg.py b/doxygen/siphon/process_syscfg.py deleted file mode 100644 index bccde2c153d..00000000000 --- a/doxygen/siphon/process_syscfg.py +++ /dev/null @@ -1,31 +0,0 @@ -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Generate syscfg formatted output - -from . import process, parsers - - -class SiphonSYSCFG(process.Siphon): - - name = "syscfg" - identifier = "VLIB_CONFIG_FUNCTION" - - def __init__(self, *args, **kwargs): - super(SiphonSYSCFG, self).__init__(*args, **kwargs) - self._parser = parsers.ParseFunctionMacroStmt() - - -# Register our processor -process.siphons["syscfg"] = SiphonSYSCFG diff --git a/doxygen/siphon_templates/itemlist/clicmd/item_format.itemlist b/doxygen/siphon_templates/itemlist/clicmd/item_format.itemlist deleted file mode 100644 index 195c378069a..00000000000 --- a/doxygen/siphon_templates/itemlist/clicmd/item_format.itemlist +++ /dev/null @@ -1,17 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{# Just output the command path #} -{{ item['value']['path'] }} diff --git a/doxygen/siphon_templates/itemlist/default/index_entry.itemlist b/doxygen/siphon_templates/itemlist/default/index_entry.itemlist deleted file mode 100644 index 3b2494fbd15..00000000000 --- a/doxygen/siphon_templates/itemlist/default/index_entry.itemlist +++ /dev/null @@ -1,15 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} diff --git a/doxygen/siphon_templates/itemlist/default/index_header.itemlist b/doxygen/siphon_templates/itemlist/default/index_header.itemlist deleted file mode 100644 index 3b2494fbd15..00000000000 --- a/doxygen/siphon_templates/itemlist/default/index_header.itemlist +++ /dev/null @@ -1,15 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} diff --git a/doxygen/siphon_templates/itemlist/default/index_section.itemlist b/doxygen/siphon_templates/itemlist/default/index_section.itemlist deleted file mode 100644 index 3b2494fbd15..00000000000 --- a/doxygen/siphon_templates/itemlist/default/index_section.itemlist +++ /dev/null @@ -1,15 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} diff --git a/doxygen/siphon_templates/itemlist/default/item_format.itemlist b/doxygen/siphon_templates/itemlist/default/item_format.itemlist deleted file mode 100644 index ed1b1bf7eeb..00000000000 --- a/doxygen/siphon_templates/itemlist/default/item_format.itemlist +++ /dev/null @@ -1,16 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{{ raise NotImplementedError }} diff --git a/doxygen/siphon_templates/itemlist/default/item_header.itemlist b/doxygen/siphon_templates/itemlist/default/item_header.itemlist deleted file mode 100644 index 3b2494fbd15..00000000000 --- a/doxygen/siphon_templates/itemlist/default/item_header.itemlist +++ /dev/null @@ -1,15 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} diff --git a/doxygen/siphon_templates/itemlist/syscfg/item_format.itemlist b/doxygen/siphon_templates/itemlist/syscfg/item_format.itemlist deleted file mode 100644 index 023205196f5..00000000000 --- a/doxygen/siphon_templates/itemlist/syscfg/item_format.itemlist +++ /dev/null @@ -1,17 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{# Just output the item name #} -{{ item['name'] }} diff --git a/doxygen/siphon_templates/markdown/clicmd/index_entry.md b/doxygen/siphon_templates/markdown/clicmd/index_entry.md deleted file mode 100644 index 1fa9ec9b25a..00000000000 --- a/doxygen/siphon_templates/markdown/clicmd/index_entry.md +++ /dev/null @@ -1,17 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{% set v = item['value'] %} -{{ "* [%s](@ref %s)" % (v['path'], meta["label"]) }} diff --git a/doxygen/siphon_templates/markdown/clicmd/index_header.md b/doxygen/siphon_templates/markdown/clicmd/index_header.md deleted file mode 100644 index 4167f4dc477..00000000000 --- a/doxygen/siphon_templates/markdown/clicmd/index_header.md +++ /dev/null @@ -1,130 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -# Debug CLI {{'{#'}}clicmd} - -The VPP network stack comes equipped with a set of commands that are useful -for debugging. - -The easiest way to access the CLI (with proper permissions) is to use the -vppctl command: - -``` -sudo vppctl <cli-command> -``` - -The CLI parser matches static keyword strings, eventually invoking an action -function. Unambiguous partial keyword matching always occurs. The action -functions consume input until satisfied or until they fail. This model makes -for easy coding, but does not guarantee useful "help" output. It's up to the -CLI command writer to add useful help strings. - -You can find the source code of CLI commands by searching for instances of the -@c VLIB_CLI_COMMAND macro in the code source files. - -Please help maintain and improve this document to make and keep these commands -clear and useful! - -@todo Document where to modify this CLI intro text. - - -## Debug and Telnet CLI - -The debug CLI is enabled with the unix interactive parameter or startup -configuration option. This causes VPP to start without daemonizing and -presents a command line interface on the terminal where it is run. - -The Telnet CLI is enabled with the `cli-listen localhost:5002` option which -will cause VPP to listen for TCP connections on the localhost address port -@c 5002. A Telnet client can then connect to this port (for example, `telnet -localhost 5002`) and will receive a command line prompt. - -This configuration will enable both mechanisms: - -``` -unix { - interactive - cli-listen localhost:5002 -} -``` - -The debug CLI can operate in line mode, which may be useful when running -inside an IDE like Emacs. This is enabled with the option -`unix cli-line-mode`. Several other options exist that alter how this -CLI works, see the @ref syscfg section for details. - -The CLI starts with a banner graphic (which can be disabled) and a prompt. The -prompt will typically read `vpp` for a release version of VPP and `DBGvpp#` -for a development version with debugging enabled, for example: - - _______ _ _ _____ ___ - __/ __/ _ \ (_)__ | | / / _ \/ _ \ - _/ _// // / / / _ \ | |/ / ___/ ___/ - /_/ /____(_)_/\___/ |___/_/ /_/ - - vpp# - -versus: - - _______ _ _ _____ ___ - __/ __/ _ \ (_)__ | | / / _ \/ _ \ - _/ _// // / / / _ \ | |/ / ___/ ___/ - /_/ /____(_)_/\___/ |___/_/ /_/ - - DBGvpp# - -This prompt can be configured with the `unix cli-prompt` setting and the -banner is disabled with `unix cli-no-banner`. - -## CLI features - -The CLI has several editing features that make it easy to use. - -- Cursor keys left/right will move the cursor within a command line; - typing will insert at the cursor; erase will erase at the cursor. - -- Ctrl-left/right will search for the start of the next word to - the left or right. -- Home/end will jump the cursor to the start and end of the line. -- Cursor keys up/down and ^P/^N iterate through the command history - buffer. Lines from the history buffer may be edited. New commands - are added to the end of the buffer when executed; though - duplicates of the previous command are not added. -- ^U erases the line contents from the left of the cursor to the - start. -- ^K erases the contents from the cursor to the end. -- ^S/^R will search the command history forwards or in reverse for - a command; start typing for matches to auto complete. -- ^L will clear the screen (if supported by the terminal) and repaint - the prompt and any current line. The cursor position is also - retained. -- The CLI can be closed with the quit command. Alternatively, ^D on - an empty input line will also close the session. Closing the debug - session will also shutdown VPP. - -Output that exceeds the length of a terminal page will be buffered, up to a -limit. - -- Space or page-down displays the next page. -- Enter or down-arrow displays the next line. -- Page-up goes back a page. -- Up-arrow goes up a line. -- Home/end jump to the start/end of the buffered output. -- The key q quits the pager. Space and enter will also quit the - pager if the end of the buffer has been reached. - -## Index of CLI commands - -[TOC] diff --git a/doxygen/siphon_templates/markdown/clicmd/item_format.md b/doxygen/siphon_templates/markdown/clicmd/item_format.md deleted file mode 100644 index 288dae40f24..00000000000 --- a/doxygen/siphon_templates/markdown/clicmd/item_format.md +++ /dev/null @@ -1,59 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{% set v = item['value'] %} -{{ "@section %s %s" % (meta['label'], v['path']) }} -{% if 'short_help' in v %} - -### Summary/usage - -{% set str = v['short_help'] %} -{% set period = "." if str[-1] != "." else "" %} -{% set prefix = " " if "[" in str or "<" in str or "|" in str else "" %} -{% set str = this.unescape(str) %} -{{ "%s%s%s" % (prefix, str, period) }} -{% endif %} -{% if 'long_help' in v %} -{# This is seldom used and will likely be deprecated #} - -### Long help - -{{ v['long_help'] }} -{% endif %} -{% if 'siphon_block' in item['meta'] %} -{% set sb = item["meta"]["siphon_block"] %} -{% if sb %} -{# Extracted from the code in /*? ... ?*/ blocks #} - -### Description - -{{ sb }} -{% endif %} -{% endif %} -{% if 'name' in meta or 'function' in v %} -{# Gives some developer-useful linking #} - -### Declaration and implementation -{% if "name" in meta %} - -{{ "Declaration: @ref %s (@ref %s line %d)" % - (meta['name'], meta["file"], item["meta"]["line_start"]) }} -{% endif %} -{% if "function" in v %} - -{{ "Implementation: @ref %s." % v["function"] }} -{% endif %} -{% endif %} - diff --git a/doxygen/siphon_templates/markdown/default/index_entry.md b/doxygen/siphon_templates/markdown/default/index_entry.md deleted file mode 100644 index 479dcdb2cc3..00000000000 --- a/doxygen/siphon_templates/markdown/default/index_entry.md +++ /dev/null @@ -1,16 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{{ "* [%s](@ref %s)" % (item["name"], meta["label"]) }} diff --git a/doxygen/siphon_templates/markdown/default/index_section.md b/doxygen/siphon_templates/markdown/default/index_section.md deleted file mode 100644 index 3c9d2b474c5..00000000000 --- a/doxygen/siphon_templates/markdown/default/index_section.md +++ /dev/null @@ -1,18 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} - -@subpage {{ this.page_label(group) }} - diff --git a/doxygen/siphon_templates/markdown/default/item_format.md b/doxygen/siphon_templates/markdown/default/item_format.md deleted file mode 100644 index ed1b1bf7eeb..00000000000 --- a/doxygen/siphon_templates/markdown/default/item_format.md +++ /dev/null @@ -1,16 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{{ raise NotImplementedError }} diff --git a/doxygen/siphon_templates/markdown/default/item_header.md b/doxygen/siphon_templates/markdown/default/item_header.md deleted file mode 100644 index 0c21e51fa5d..00000000000 --- a/doxygen/siphon_templates/markdown/default/item_header.md +++ /dev/null @@ -1,18 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} - -{{ "@page %s %s" % (this.page_label(group), this.page_title(group)) }} - diff --git a/doxygen/siphon_templates/markdown/syscfg/index_header.md b/doxygen/siphon_templates/markdown/syscfg/index_header.md deleted file mode 100644 index f5a9816b99c..00000000000 --- a/doxygen/siphon_templates/markdown/syscfg/index_header.md +++ /dev/null @@ -1,111 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -# Startup Configuration {{'{#'}}syscfg} - -The VPP network stack comes with several configuration options that can be -provided either on the command line or in a configuration file. - -Specific applications built on the stack have been known to require a dozen -arguments, depending on requirements. This section describes commonly-used -options and parameters. - -You can find command-line argument parsers in the source code by searching for -instances of the `VLIB_CONFIG_FUNCTION` macro. The invocation -`VLIB_CONFIG_FUNCTION(foo_config, "foo")` will cause the function -`foo_config` to receive all the options and values supplied in a parameter -block named "`foo`", for example: `foo { arg1 arg2 arg3 ... }`. - -@todo Tell the nice people where this document lives so that the might -help improve it! - -## Command-line arguments - -Parameters are grouped by a section name. When providing more than one -parameter to a section all parameters for that section must be wrapped in -curly braces. - -``` -/usr/bin/vpp unix { interactive cli-listen 127.0.0.1:5002 } -``` - -Which will produce output similar to this: - - <startup diagnostic messages> - _______ _ _ _____ ___ - __/ __/ _ \ (_)__ | | / / _ \/ _ \ - _/ _// // / / / _ \ | |/ / ___/ ___/ - /_/ /____(_)_/\___/ |___/_/ /_/ - - vpp# <start-typing> - -When providing only one such parameter the braces are optional. For example, -the following command argument, `unix interactive` does not have braces: - -``` -/usr/bin/vpp unix interactive -``` - -The command line can be presented as a single string or as several; anything -given on the command line is concatenated with spaces into a single string -before parsing. - -VPP applications must be able to locate their own executable images. The -simplest way to ensure this will work is to invoke a VPP application by giving -its absolute path; for example: `/usr/bin/vpp <options>`. At startup, VPP -applications parse through their own ELF-sections (primarily) to make lists -of init, configuration, and exit handlers. - -When developing with VPP, in _gdb_ it's often sufficient to start an application -like this at the `(gdb)` prompt: - -``` -run unix interactive -``` - -## Configuration file - -It is also possible to supply parameters in a startup configuration file the -path of which is provided to the VPP application on its command line. - -The format of the configuration file is a simple text file with the same -content as the command line but with the benefit of being able to use newlines -to make the content easier to read. For example: - -``` -unix { - nodaemon - log /var/log/vpp/vpp.log - full-coredump - cli-listen localhost:5002 -} -api-trace { - on -} -dpdk { - dev 0000:03:00.0 -} -``` - -VPP is then instructed to load this file with the `-c` option: - -``` -/usr/bin/vpp -c /etc/vpp/startup.conf -``` - -## Index of startup command sections - -[TOC] - diff --git a/doxygen/siphon_templates/markdown/syscfg/item_format.md b/doxygen/siphon_templates/markdown/syscfg/item_format.md deleted file mode 100644 index 53136115bbc..00000000000 --- a/doxygen/siphon_templates/markdown/syscfg/item_format.md +++ /dev/null @@ -1,42 +0,0 @@ -{# -# Copyright (c) 2016 Comcast Cable Communications Management, LLC. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#} -{% set v = item['value'] %} -{{ "@section %s %s" % (meta['label'], item['name']) }} -{% if 'siphon_block' in item['meta'] %} -{% set sb = item["meta"]["siphon_block"] %} -{% if sb %} -{# Extracted from the code in /*? ... ?*/ blocks #} - -### Description - -{{ sb }} -{% endif %} -{% endif %} -{% if "name" in meta or "function" in item %} -{# Gives some developer-useful linking #} - -### Declaration and implementation -{% if "name" in meta %} - -{{ "Declaration: @ref %s (@ref %s line %d)" % - (meta['name'], meta["file"], item["meta"]["line_start"]) }} -{% endif %} -{% if "function" in item %} - -{{ "Implementation: @ref %s." % item["function"] }} -{% endif %} -{% endif %} - diff --git a/doxygen/test_framework_doc.md b/doxygen/test_framework_doc.md deleted file mode 100644 index c20ef619ade..00000000000 --- a/doxygen/test_framework_doc.md +++ /dev/null @@ -1,9 +0,0 @@ -Test Framework Documentation {#test_framework_doc} -============================ - -PyDoc generated documentation for the "make test" framework is available for -the following actively supported releases: - -- [Test framework documentation for VPP 22.02](https://docs.fd.io/vpp/22.02/vpp_make_test/html) -- [Test framework documentation for VPP 21.10](https://docs.fd.io/vpp/21.10/vpp_make_test/html) -- [Test framework documentation for VPP 21.06](https://docs.fd.io/vpp/21.06/vpp_make_test/html) diff --git a/doxygen/user_doc.md b/doxygen/user_doc.md deleted file mode 100644 index ff597c0421b..00000000000 --- a/doxygen/user_doc.md +++ /dev/null @@ -1,35 +0,0 @@ -User Documentation {#user_doc} -================== - -Several modules provide operational, dataplane-user focused documentation. - -- [GUI guided user demo](https://wiki.fd.io/view/VPP_Sandbox/vpp-userdemo) -- @subpage avf_plugin_doc -- @subpage bfd_doc -- @subpage dpdk_crypto_ipsec_doc -- @subpage dhcp6_pd_doc -- @subpage flowprobe_plugin_doc -- @subpage ioam_plugin_doc -- @subpage kp_plugin_doc -- @subpage lacp_plugin_doc -- @subpage lb_plugin_doc -- @subpage lldp_doc -- @subpage map_doc -- @subpage marvell_plugin_doc -- @subpage srv6_mobile_plugin -- @subpage mtu_doc -- @subpage nat64_doc -- @subpage nat_ha_doc -- @subpage qos_doc -- @subpage quic_doc -- @subpage rdma_doc -- @subpage selinux_doc -- @subpage span_doc -- @subpage srmpls_doc -- @subpage srv6_doc -- @subpage vcl_ldpreload_doc -- @subpage vmxnet3_doc -- @subpage af_xdp_doc -- @subpage wireguard_plugin_doc -- @subpage vpp_top_doc -- @subpage stats_fs_doc |
