diff options
Diffstat (limited to 'dpdk/Makefile')
| -rw-r--r-- | dpdk/Makefile | 485 |
1 files changed, 0 insertions, 485 deletions
diff --git a/dpdk/Makefile b/dpdk/Makefile deleted file mode 100644 index 9f7faa3477a..00000000000 --- a/dpdk/Makefile +++ /dev/null @@ -1,485 +0,0 @@ -# Copyright (c) 2015 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Scripts require non-POSIX parts of bash -SHELL := /bin/bash - -DPDK_BUILD_DIR ?= $(CURDIR)/_build -DPDK_INSTALL_DIR ?= $(CURDIR)/_install -DPDK_PKTMBUF_HEADROOM ?= 128 -DPDK_CACHE_LINE_SIZE ?= 64 -DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads -DPDK_DEBUG ?= n -DPDK_MLX4_PMD ?= n -DPDK_MLX5_PMD ?= n -DPDK_TAP_PMD ?= n -DPDK_FAILSAFE_PMD ?= n - -B := $(DPDK_BUILD_DIR) -I := $(DPDK_INSTALL_DIR) -DPDK_VERSION ?= 18.08 -PKG_SUFFIX ?= vpp3 -DPDK_BASE_URL ?= http://fast.dpdk.org/rel -DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz -DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) -DPDK_18.05_TARBALL_MD5_CKSUM := 9fc86367cd9407ff6a8dfea56c4eddc4 -DPDK_18.08_TARBALL_MD5_CKSUM := da5e7fb25ab063c47e53929fb8c58be5 -MACHINE=$(shell uname -m) - -# replace dot with space, and if 3rd word exists we deal with stable dpdk rel -ifeq ($(word 3,$(subst ., ,$(DPDK_VERSION))),) -DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) -else -DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION) -endif - -NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds -NASM_VER := 2.13.03 -NASM_TARBALL := nasm-$(NASM_VER).tar.xz -NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL) -NASM_SOURCE := $(B)/nasm-$(NASM_VER) - -ifneq (,$(findstring 18.02,$(DPDK_VERSION))) -IPSEC_MB_VER ?= 0.48 -else -IPSEC_MB_VER ?= 0.49 -endif - -ifeq ($(MACHINE),$(filter $(MACHINE),x86_64)) - AESNI ?= y -$(info Building IPSec-MB $(IPSEC_MB_VER) library) -else - AESNI ?= N -endif - -AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz -AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL) -AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER) - -ifneq (,$(findstring clang,$(CC))) -DPDK_CC=clang -else ifneq (,$(findstring icc,$(CC))) -DPDK_CC=icc -else -DPDK_CC=gcc -endif - -############################################################################## -# Intel x86 -############################################################################## -ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686)) -DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC) -DPDK_MACHINE ?= nhm -DPDK_TUNE ?= core-avx2 - -############################################################################## -# ARM64 -############################################################################## -else ifeq ($(MACHINE),aarch64) -CROSS := -export CROSS -DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC) -DPDK_MACHINE ?= armv8a -DPDK_TUNE ?= generic - -CPU_IMP_ARM = 0x41 -CPU_IMP_CAVIUM = 0x43 - -CPU_PART_ARM_CORTEX_A53 = 0xd03 -CPU_PART_ARM_CORTEX_A57 = 0xd07 -CPU_PART_ARM_CORTEX_A72 = 0xd08 -CPU_PART_ARM_CORTEX_A73 = 0xd09 - -CPU_PART_CAVIUM_THUNDERX = 0x0a1 -CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2 -CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3 - -MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo) -MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo) - -ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM)) -############################################################################## -# Arm Cortex -############################################################################## -CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \ - $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \ - $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \ - $(CPU_PART_ARM_CORTEX_A73)/cortex-a73 -CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE))) -ifneq ($(CPU_TUNE),) -DPDK_TUNE = $(CPU_TUNE) -else -$(warning Unknown Arm CPU) -endif - -else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM)) -############################################################################## -# Cavium ThunderX -############################################################################## -ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \ - $(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX))) -DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC) -DPDK_MACHINE = thunderx -DPDK_CACHE_LINE_SIZE := 128 -else -$(warning Unknown Cavium CPU) -endif -endif - -############################################################################## -# Unknown platform -############################################################################## -else -$(error Unknown platform) -endif - -# /proc/cpuinfo does not exist on platforms without a /proc and on some -# platforms, notably inside containers, it has no content. In those cases -# we assume there's 1 processor; we use 2*ncpu for the -j option. -# NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test -# for file presence and content; for now this will have to do. -JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\ - $(shell grep -c ^processor /proc/cpuinfo), 2) - -# compiler/linker custom arguments -ifeq ($(DPDK_CC),clang) -DPDK_CPU_CFLAGS := -fPIE -fPIC -else -DPDK_CPU_CFLAGS := -pie -fPIC -endif - -ifeq ($(DPDK_DEBUG),n) -DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) -else -DPDK_EXTRA_CFLAGS := -g -O0 -endif - -# -Wimplicit-fallthrough was introduced starting from GCC 7, -# and it requires newer version of ccache. -# Disable fallthrough warning for old ccache version. -ifeq ($(DPDK_CC),gcc) -GCC_VER_V = "7.0.0" -CCACHE_VER_V = "3.4.1" -GCC_VER = $(shell gcc --version | grep ^gcc | sed 's/^.* //g') -CCACHE_VER = $(shell ccache --version | grep ^ccache | sed 's/^.* //g') -ifeq ($(shell expr "$(GCC_VER)" ">=" "$(GCC_VER_V)"),1) -ifeq ($(shell expr "$(CCACHE_VER)" "<" "$(CCACHE_VER_V)"),1) -DPDK_EXTRA_CFLAGS += -Wimplicit-fallthrough=0 -endif -endif -endif - -ifeq ($(AESNI),y) -IPSEC_MB_BUILD_PATH := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER) -DPDK_EXTRA_CFLAGS += -L$(IPSEC_MB_BUILD_PATH) -I$(IPSEC_MB_BUILD_PATH) -endif - -DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE) - -# assemble DPDK make arguments -DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ - T=$(DPDK_TARGET) \ - RTE_CONFIG_TEMPLATE=../custom-config \ - EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ - EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ - CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ - DESTDIR=$(I) \ - $(DPDK_MAKE_EXTRA_ARGS) - -define set -@if grep -q CONFIG_$1 $@ ; \ - then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ - else echo CONFIG_$1=$2 >> $@ ; \ -fi -endef - -all: build - -$(B)/custom-config: $(B)/.patch.ok Makefile - @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- - @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ - $(call set,RTE_MACHINE,$(DPDK_MACHINE)) - @# modify options - $(call set,RTE_MAX_LCORE,256) - $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) - $(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE)) - $(call set,RTE_LIBEAL_USE_HPET,y) - $(call set,RTE_BUILD_COMBINE_LIBS,y) - $(call set,RTE_PCI_CONFIG,y) - $(call set,RTE_PCI_EXTENDED_TAG,"on") - $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) - @# enable debug init for device drivers - $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) - $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) - $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) - $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) - $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) - $(call set,RTE_LIBRTE_PMD_BOND,y) - $(call set,RTE_LIBRTE_IP_FRAG,y) - $(call set,RTE_LIBRTE_PMD_QAT,y) - $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI)) - $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI)) - $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD)) - $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) - $(call set,RTE_LIBRTE_PMD_SOFTNIC,n) - $(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD)) - $(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD)) - $(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD)) - $(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD)) - @# not needed - $(call set,RTE_LIBRTE_CFGFILE,n) - $(call set,RTE_LIBRTE_LPM,n) - $(call set,RTE_LIBRTE_ACL,n) - $(call set,RTE_LIBRTE_POWER,n) - $(call set,RTE_LIBRTE_DISTRIBUTOR,n) - $(call set,RTE_LIBRTE_PORT,n) - $(call set,RTE_LIBRTE_TABLE,n) - $(call set,RTE_LIBRTE_PIPELINE,n) - $(call set,RTE_LIBRTE_FLOW_CLASSIFY,n) - $(call set,RTE_KNI_KMOD,n) - $(call set,RTE_EAL_IGB_UIO,n) - @# currently broken in 18.02 - $(call set,RTE_LIBRTE_DPAA_BUS,n) - $(call set,RTE_LIBRTE_DPAA_MEMPOOL,n) - $(call set,RTE_LIBRTE_DPAA_PMD,n) - $(call set,RTE_LIBRTE_PMD_DPAA_SEC,n) - $(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n) - @rm -f .config.ok - -$(CURDIR)/$(DPDK_TARBALL): - @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ - then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ - else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ - fi - @rm -f $(B)/.download.ok - -$(CURDIR)/$(NASM_TARBALL): - @if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \ - then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \ - else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \ - fi - -$(CURDIR)/$(AESNIMB_LIB_TARBALL): - @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \ - then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \ - else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \ - fi - -DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL) -ifeq ($(AESNI),y) -DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL) -DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL) -endif - -$(B)/.download.ok: $(DPDK_DOWNLOADS) - @mkdir -p $(B) - @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum - @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ - ( echo "Bad Checksum! Please remove $< and retry" && \ - rm $(B)/$(DPDK_TARBALL).md5sum && false )) - @touch $@ - -.PHONY: download -download: $(B)/.download.ok - -$(B)/.extract.ok: $(B)/.download.ok - @echo --- extracting $(DPDK_TARBALL) --- - @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) -ifeq ($(AESNI),y) - @echo --- extracting $(NASM_TARBALL) --- - @tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL) - @echo --- extracting $(AESNIMB_LIB_TARBALL) --- - @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL) -endif - @touch $@ - -.PHONY: extract -extract: $(B)/.extract.ok - -$(B)/.patch.ok: $(B)/.extract.ok -ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),) - @echo --- patching --- - @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \ - echo Applying patch: $$(basename $$f) ; \ - patch -p1 -d $(DPDK_SOURCE) < $$f ; \ - done -endif - @touch $@ - -.PHONY: patch -patch: $(B)/.patch.ok - -$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config - @make $(DPDK_MAKE_ARGS) config - @touch $@ - -.PHONY: config -config: $(B)/.config.ok - -.PHONY: build-nasm -build-nasm: - cd $(NASM_SOURCE) && sh configure && make -j - -.PHONY: build-ipsec-mb -build-ipsec-mb: - mkdir -p $(I)/lib/ - # Do not build GCM stuff if we are building ISA_L - make -C $(AESNIMB_LIB_SOURCE) -j SHARED=n \ - EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm - cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/ - -.PHONY: build-dpdk -build-dpdk: - @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi - @make $(DPDK_MAKE_ARGS) install - -# Order matters -ifeq ($(AESNI),y) -BUILD_TARGETS += build-nasm -BUILD_TARGETS += build-ipsec-mb -endif -BUILD_TARGETS += build-dpdk - -$(B)/.build.ok: $(BUILD_TARGETS) - @touch $@ - -.PHONY: build -build: $(B)/.build.ok - -.PHONY: install -install: $(B)/.build.ok - -.PHONY: clean -clean: - @rm -rf $(B) $(I) - -############################################################################## -# .deb packaging -############################################################################## - -DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null) -DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb -INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null) - -.PHONY: build-deb install-deb check-deb - -deb/debian/changelog: Makefile - @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@ - @echo "" >> $@ - @echo " * DPDK Release $(DPDK_VERSION)" >> $@ - @echo "" >> $@ - @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@ - -$(DEV_DEB): deb/debian/changelog - @cd deb && dpkg-buildpackage -b -uc -us - git clean -fdx deb - -build-deb: $(DEV_DEB) - -install-deb: -ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) - @echo "==========================================================" - @echo " Out of date DPDK package installed." - @echo " Installed: $(INSTALLED_DEB_VER)" - @echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)" - @echo "==========================================================" - @make $(DEV_DEB) - @sudo dpkg -i $(DEV_DEB) -else - @echo "==========================================================" - @echo " Up-to-date DPDK package already installed" - @echo "==========================================================" -endif - -check-deb: -ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) - @echo "==========================================================" - @echo " Outdated DPDK package detected:" - @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)" - @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)" - @echo "" - @echo " Please upgrade by invoking 'make dpdk-install-dev'" - @echo " from the top level directory." - @echo "==========================================================" -endif - -############################################################################## -# .rpm packaging -############################################################################## - -RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null) -DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm -INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst") - -.PHONY: build-rpm install-rpm check-rpm - -$(DEV_RPM): Makefile rpm/vpp-dpdk.spec - @rpmbuild -bb \ - --define "_topdir $(CURDIR)/rpm" \ - --define "_version $(DPDK_VERSION)" \ - --define "_release $(PKG_SUFFIX)" \ - $(CURDIR)/rpm/vpp-dpdk.spec - mv rpm/RPMS/$(RPM_ARCH)/*.rpm . - git clean -fdx rpm - -build-rpm: $(DEV_RPM) - -install-rpm: -ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) - @$(MAKE) $(DEV_RPM) - sudo rpm -Uih $(DEV_RPM) -else - @echo "==========================================================" - @echo " Up-to-date DPDK package already installed" - @echo "==========================================================" -endif - -check-rpm: -ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) - @echo "==========================================================" - @echo " Outdated DPDK package detected:" - @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)" - @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)" - @echo "" - @echo " Please upgrade by invoking 'make dpdk-install-dev'" - @echo " from the top level directory." - @echo "==========================================================" -endif - -############################################################################## -# ebuild support -############################################################################## - -.PHONY: ebuild-build ebuild-install - -ebuild-build: -ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) - @echo "==========================================================" - @echo "Building DPDK from source. Consider installing development" - @echo "package by invoking 'make dpdk-install-dev' from the" - @echo "top level directory" - @echo "==========================================================" - make config -else -ifneq ($(INSTALLED_DEB_VER),) - make check-deb -endif -ifneq ($(INSTALLED_RPM_VER),) - make check-rpm -endif -endif - -ebuild-install: -ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) - make install -endif |