diff options
Diffstat (limited to 'extras/deprecated/netmap/cli.c')
| -rw-r--r-- | extras/deprecated/netmap/cli.c | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/extras/deprecated/netmap/cli.c b/extras/deprecated/netmap/cli.c new file mode 100644 index 00000000000..713632947a1 --- /dev/null +++ b/extras/deprecated/netmap/cli.c @@ -0,0 +1,236 @@ +/* + *------------------------------------------------------------------ + * Copyright (c) 2016 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + *------------------------------------------------------------------ + */ +#include <stdint.h> +#include <net/if.h> +#include <sys/ioctl.h> + +#include <vlib/vlib.h> +#include <vlib/unix/unix.h> +#include <vnet/ethernet/ethernet.h> + +#include <vnet/devices/netmap/net_netmap.h> +#include <vnet/devices/netmap/netmap.h> + +static clib_error_t * +netmap_create_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + unformat_input_t _line_input, *line_input = &_line_input; + u8 *host_if_name = NULL; + u8 hwaddr[6]; + u8 *hw_addr_ptr = 0; + int r; + u8 is_pipe = 0; + u8 is_master = 0; + u32 sw_if_index = ~0; + clib_error_t *error = NULL; + + /* Get a line of input. */ + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "name %s", &host_if_name)) + ; + else + if (unformat + (line_input, "hw-addr %U", unformat_ethernet_address, hwaddr)) + hw_addr_ptr = hwaddr; + else if (unformat (line_input, "pipe")) + is_pipe = 1; + else if (unformat (line_input, "master")) + is_master = 1; + else if (unformat (line_input, "slave")) + is_master = 0; + else + { + error = clib_error_return (0, "unknown input `%U'", + format_unformat_error, line_input); + goto done; + } + } + + if (host_if_name == NULL) + { + error = clib_error_return (0, "missing host interface name"); + goto done; + } + + r = + netmap_create_if (vm, host_if_name, hw_addr_ptr, is_pipe, is_master, + &sw_if_index); + + if (r == VNET_API_ERROR_SYSCALL_ERROR_1) + { + error = clib_error_return (0, "%s (errno %d)", strerror (errno), errno); + goto done; + } + + if (r == VNET_API_ERROR_INVALID_INTERFACE) + { + error = clib_error_return (0, "Invalid interface name"); + goto done; + } + + if (r == VNET_API_ERROR_SUBIF_ALREADY_EXISTS) + { + error = clib_error_return (0, "Interface already exists"); + goto done; + } + + vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name, vnet_get_main (), + sw_if_index); + +done: + unformat_free (line_input); + + return error; +} + +/*? + * '<em>netmap</em>' is a framework for very fast packet I/O from userspace. + * '<em>VALE</em>' is an equally fast in-kernel software switch using the + * netmap API. '<em>netmap</em>' includes '<em>netmap pipes</em>', a shared + * memory packet transport channel. Together, they provide a high speed + * user-space interface that allows VPP to patch into a linux namespace, a + * linux container, or a physical NIC without the use of DPDK. Netmap/VALE + * generates the '<em>netmap.ko</em>' kernel module that needs to be loaded + * before netmap interfaces can be created. + * - https://github.com/luigirizzo/netmap - Netmap/VALE repo. + * - https://github.com/vpp-dev/netmap - VPP development package for Netmap/VALE, + * which is a snapshot of the Netmap/VALE repo with minor changes to work + * with containers and modified kernel drivers to work with NICs. + * + * Create a netmap interface that will attach to a linux interface. + * The interface must already exist. Once created, a new netmap interface + * will exist in VPP with the name '<em>netmap-<ifname></em>', where + * '<em><ifname></em>' takes one of two forms: + * - <b>ifname</b> - Linux interface to bind too. + * - <b>valeXXX:YYY</b> - + * - Where '<em>valeXXX</em>' is an arbitrary name for a VALE + * interface that must start with '<em>vale</em>' and is less + * than 16 characters. + * - Where '<em>YYY</em>' is an existing linux namespace. + * + * This command has the following optional parameters: + * + * - <b>hw-addr <mac-addr></b> - Optional ethernet address, can be in either + * X:X:X:X:X:X unix or X.X.X cisco format. + * + * - <b>pipe</b> - Optional flag to indicate that a '<em>netmap pipe</em>' + * instance should be created. + * + * - <b>master | slave</b> - Optional flag to indicate whether VPP should + * be the master or slave of the '<em>netmap pipe</em>'. Only considered + * if '<em>pipe</em>' is entered. Defaults to '<em>slave</em>' if not entered. + * + * @cliexpar + * Example of how to create a netmap interface tied to the linux + * namespace '<em>vpp1</em>': + * @cliexstart{create netmap name vale00:vpp1 hw-addr 02:FE:3F:34:15:9B pipe master} + * netmap-vale00:vpp1 + * @cliexend + * Once the netmap interface is created, enable the interface using: + * @cliexcmd{set interface state netmap-vale00:vpp1 up} +?*/ +/* *INDENT-OFF* */ +VLIB_CLI_COMMAND (netmap_create_command, static) = { + .path = "create netmap", + .short_help = "create netmap name <ifname>|valeXXX:YYY " + "[hw-addr <mac-addr>] [pipe] [master|slave]", + .function = netmap_create_command_fn, +}; +/* *INDENT-ON* */ + +static clib_error_t * +netmap_delete_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + unformat_input_t _line_input, *line_input = &_line_input; + u8 *host_if_name = NULL; + clib_error_t *error = NULL; + + /* Get a line of input. */ + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "name %s", &host_if_name)) + ; + else + { + error = clib_error_return (0, "unknown input `%U'", + format_unformat_error, line_input); + goto done; + } + } + + if (host_if_name == NULL) + { + error = clib_error_return (0, "missing host interface name"); + goto done; + } + + netmap_delete_if (vm, host_if_name); + +done: + unformat_free (line_input); + + return error; +} + +/*? + * Delete a netmap interface. Use the '<em><ifname></em>' to identify + * the netmap interface to be deleted. In VPP, netmap interfaces are + * named as '<em>netmap-<ifname></em>', where '<em><ifname></em>' + * takes one of two forms: + * - <b>ifname</b> - Linux interface to bind too. + * - <b>valeXXX:YYY</b> - + * - Where '<em>valeXXX</em>' is an arbitrary name for a VALE + * interface that must start with '<em>vale</em>' and is less + * than 16 characters. + * - Where '<em>YYY</em>' is an existing linux namespace. + * + * @cliexpar + * Example of how to delete a netmap interface named '<em>netmap-vale00:vpp1</em>': + * @cliexcmd{delete netmap name vale00:vpp1} +?*/ +/* *INDENT-OFF* */ +VLIB_CLI_COMMAND (netmap_delete_command, static) = { + .path = "delete netmap", + .short_help = "delete netmap name <ifname>|valeXXX:YYY", + .function = netmap_delete_command_fn, +}; +/* *INDENT-ON* */ + +clib_error_t * +netmap_cli_init (vlib_main_t * vm) +{ + return 0; +} + +VLIB_INIT_FUNCTION (netmap_cli_init); + +/* + * fd.io coding-style-patch-verification: ON + * + * Local Variables: + * eval: (c-set-style "gnu") + * End: + */ |