diff options
Diffstat (limited to 'extras/vpp_config/data/startup.conf.template')
| -rw-r--r-- | extras/vpp_config/data/startup.conf.template | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/extras/vpp_config/data/startup.conf.template b/extras/vpp_config/data/startup.conf.template new file mode 100644 index 00000000000..91b92c62aea --- /dev/null +++ b/extras/vpp_config/data/startup.conf.template @@ -0,0 +1,123 @@ + +unix {{ +{unix} + log /tmp/vpp.log + full-coredump + cli-listen /run/vpp/cli.sock +}} + +api-trace {{ + on +}} + +cpu {{ +{cpu} + scheduler-policy fifo + scheduler-priority 50 + + ## In the VPP there is one main thread and optionally the user can create worker(s) + ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically + + ## Manual pinning of thread(s) to CPU core(s) + + ## Set logical CPU core where main thread runs + # main-core 1 + + ## Set logical CPU core(s) where worker threads are running + # corelist-workers 2-3,18-19 + + ## Automatic pinning of thread(s) to CPU core(s) + + ## Sets number of CPU core(s) to be skipped (1 ... N-1) + ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). + ## The main thread is automatically pinned to the first available CPU core and worker(s) + ## are pinned to next free CPU core(s) after core assigned to main thread + # skip-cores 4 + + ## Specify a number of workers to be created + ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) + ## and main thread's CPU core + # workers 2 + + ## Set scheduling policy and priority of main and worker threads + + ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) + ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) + # scheduler-policy fifo + + ## Scheduling priority is used only for "real-time policies (fifo and rr), + ## and has to be in the range of priorities supported for a particular policy + # scheduler-priority 50 +}} + +dpdk {{ +{devices} + + ## Change default settings for all intefaces + # dev default {{ + ## Number of receive queues, enables RSS + ## Default is 1 + # num-rx-queues 3 + + ## Number of transmit queues, Default is equal + ## to number of worker threads or 1 if no workers treads + # num-tx-queues 3 + + ## Number of descriptors in transmit and receive rings + ## increasing or reducing number can impact performance + ## Default is 1024 for both rx and tx + # num-rx-desc 512 + # num-tx-desc 512 + + ## VLAN strip offload mode for interface + ## Default is off + # vlan-strip-offload on + # }} + + ## Whitelist specific interface by specifying PCI address + # dev 0000:02:00.0 + + ## Whitelist specific interface by specifying PCI address and in + ## addition specify custom parameters for this interface + # dev 0000:02:00.1 {{ + # num-rx-queues 2 + # }} + + ## Specify bonded interface and its slaves via PCI addresses + ## + ## Bonded interface in XOR load balance mode (mode 2) with L3 and L4 headers + # vdev eth_bond0,mode=2,slave=0000:02:00.0,slave=0000:03:00.0,xmit_policy=l34 + # vdev eth_bond1,mode=2,slave=0000:02:00.1,slave=0000:03:00.1,xmit_policy=l34 + ## + ## Bonded interface in Active-Back up mode (mode 1) + # vdev eth_bond0,mode=1,slave=0000:02:00.0,slave=0000:03:00.0 + # vdev eth_bond1,mode=1,slave=0000:02:00.1,slave=0000:03:00.1 + + ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci + ## and uio_pci_generic (default) + # uio-driver vfio-pci + + ## Disable mutli-segment buffers, improves performance but + ## disables Jumbo MTU support + # no-multi-seg + + ## Increase number of buffers allocated, needed only in scenarios with + ## large number of interfaces and worker threads. Value is per CPU socket. + ## Default is 16384 + # num-mbufs 128000 + + ## Change hugepages allocation per-socket, needed only if there is need for + ## larger number of mbufs. Default is 256M on each detected CPU socket + # socket-mem 2048,2048 +}} + +# Adjusting the plugin path depending on where the VPP plugins are: +#plugins +#{{ +# path /home/bms/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins +#}} + +# Alternate syntax to choose plugin path +#plugin_path /home/bms/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins + +{tcp} |