summaryrefslogtreecommitdiffstats
path: root/src/plugins/acl/hash_lookup.md
diff options
context:
space:
mode:
Diffstat (limited to 'src/plugins/acl/hash_lookup.md')
-rw-r--r--src/plugins/acl/hash_lookup.md241
1 files changed, 241 insertions, 0 deletions
diff --git a/src/plugins/acl/hash_lookup.md b/src/plugins/acl/hash_lookup.md
new file mode 100644
index 00000000000..95524643e25
--- /dev/null
+++ b/src/plugins/acl/hash_lookup.md
@@ -0,0 +1,241 @@
+ACL plugin constant-time lookup design
+======================================
+
+The initial implementation of ACL plugin performs a trivial for() cycle,
+going through the assigned ACLs on a per-packet basis. This is not very
+efficient, even if for very short ACLs due to its simplicity it can beat
+more advanced methods.
+
+However, to cover the case of longer ACLs with acceptable performance,
+we need to have a better way of matching. This write-up proposes
+a mechanism to make a lookup from O(M) where M is number of entries
+to O(N) where N is number of different mask combinations.
+
+Preparation of ACL(s)
+---------------------
+
+The ACL plugin will maintain a global list of "mask types", i.e. the specific
+configurations of "do not care" bits within the ACEs.
+Upon the creation of a new ACL, a pass will be made through all the
+ACEs, to assign and possibly allocate the "mask type number".
+
+Each ACL has a structure *hash_acl_info_t* representing the "hash-based"
+parts of information related to that ACL, primarily the array of
+*hash_ace_info_t* structures - each of the members of that array
+corresponding to one of the rules (ACEs) in the original ACL,
+for this they have a pair of *(acl_index, ace_index)* to keep track,
+predominantly for the debugging.
+
+Why do we need a whole separate structure, and are not adding new fields
+to the existing rile structure ? First, encapsulation, to minimize
+the pollution of the main ACL code with the hash-based lookup artifacts.
+
+Second, one rule may correspond to more than one "hash-based" ACE.
+In fact, most of the rules do correspond to two of those. Why ?
+
+Consider that the current ACL lookup logic is that if a packet
+is not the initial fragment, and there is an L4 entry acting on the packet,
+the comparison will be made only on the L4 protocol field value rather
+than on the protocol and port values. This beaviour is governed by
+*l4_match_nonfirst_fragment* flag in the *acl_main*, and was needed to
+maintain the compatibility with the existing software switch implementation.
+
+While for the sequential check in *single_acl_match_5tuple()*
+it is very easy to implement by just breaking out at the right moment,
+in case of hash-based matching this cost us two checks:
+one on full 5-tuple and the flag *pkt.is_nonfirst_fragment* being zero,
+the second on 3-tuple and the flag *pkt.is_nonfirst_fragment* being one,
+with the second check triggered by the *acl_main.l4_match_nonfirst_fragment*
+setting being the default 1. This dictates the necessity of having a "match"
+field in a given *hash_ace_info_t* element, which would reflect the value
+we are supposed to match after applying the mask.
+
+There can be other circumstances when it might be beneficial to expand
+the given rule in the original ACL into multiple - for example, as an
+optimization within the port range handling for small port ranges
+(this is not done as of the time of writing).
+
+Assigning ACLs to an interface
+------------------------------
+
+Once the ACL list is assigned to an interface, or, rather, a new ACL
+is added to the list of the existing ACLs applied to the interface,
+we need to update the bihash accelerating the lookup.
+
+All the entries for the lookups are stored within a single *48_8* bihash,
+which captures the 5-tuple from the packet as well as the miscellaneous
+per-packet information flags, e.g. *l4_valid*, *is_non_first_fragment*,
+and so on. To facilitate the use of the single bihash by all the interfaces,
+the *is_ip6*, *is_input*, *sw_if_index* are part of the key,
+as well as *mask_type_index* - the latter being necessary because
+there can be entries with the same value but different masks, e.g.:
+`permit ::/0, permit::/128`.
+
+At the moment of an ACL being applied to an interface, we need to
+walk the list of *hash_ace_info_t* entries corresponding to that ACL,
+and update the bihash with the keys corresponding to the match
+values in these entries.
+
+The value of the hash match contains the index into a per-*sw_if_index* vector
+of *applied_ace_hash_entry_t* elements, as well as a couple of flags:
+*shadowed* (optimization: if this flag on a matched entry is zero, means
+we can stop the lookup early and declare a match - see below),
+and *need_portrange_check* - meaning that what matched was a superset
+of the actual match, and we need to perform an extra check.
+
+Also, upon insertion, we must keep in mind there can be
+multiple *applied_ace_hash_entry_t* for the same key and must keep
+a list of those. This is necessary to incrementally apply/unapply
+the ACLs as part of the ACL vector: say, two ACLs have
+"permit 2001:db8::1/128 any" - we should be able to retain the entry
+for the second ACL even if we have deleted the first one.
+Also, in case there are two entries with the same key but
+different port ranges, say 0..42 and 142..65535 - we need
+to be able to sequentially match on those if we decide not
+to expand them into individual port-specific entries.
+
+Per-packet lookup
+-----------------
+
+The simple single-packet lookup is defined in
+*multi_acl_match_get_applied_ace_index*, which returns the index
+of the applied hash ACE if there was a match, or ~0 if there wasn't.
+
+The future optimized per-packet lookup may be batched in three phases:
+
+1. Prepare the keys in the per-worker vector by doing logical AND of
+ original 5-tuple record with the elements of the mask vector.
+2. Lookup the keys in the bihash in a batch manner, collecting the
+ result with lowest u64 (acl index within vector, ACE index) from
+ the hash lookup value, and performing the list walk if necessary
+ (for portranges)
+3. Take the action from the ACL record as defined by (ACL#, ACE#) from the
+ resulting lookup winner, or, if no match found, then perform default deny.
+
+Shadowed/independent/redundant ACEs
+------------------------------------
+
+During the phase of combining multiple ACLs into one rulebase, when they
+are applied to interface, we also can perform several optimizations.
+
+If a given ACE is a strict subset of another ACE located up in the linear
+search order, we can ignore this ACE completely - because by definition
+it will never match. We will call such an ACE *redundant*. Here is an example:
+
+```
+permit 2001:db8:1::/48 2001:db8:2::/48 (B)
+deny 2001:d8b:1:1::/64 2001:db8:2:1::/64 (A)
+```
+
+A bit more formally, we can define this relationship of an ACE A to ACE B as:
+
+```
+redundant(aceA, aceB) := (contains(protoB, protoA) && contains(srcB, srcA)
+ && contains(dstB, dstA) && is_after(A, B))
+```
+
+Here as "contains" we define an operation operating on the sets defined by
+the protocol, (srcIP, srcPortDefinition) and (dstIP, dstPortDefinition)
+respectively, and returning true if all the elements represented by
+the second argument are represented by the first argument. The "is_after"
+is true if A is located below B in the ruleset.
+
+If a given ACE does not intersect at all with any other ACE
+in front of it, we can mark it as such.
+
+Then during the sequence of the lookups the successful hit on this ACE means
+we do not need to look up other mask combinations - thus potentially
+significantly speeding up the match process. Here is an example,
+assuming we have the following ACL:
+
+```
+permit 2001:db8:1::/48 2001:db8:2::/48 (B)
+deny 2001:db8:3::/48 2001:db8:2:1::/64 (A)
+```
+
+In this case if we match the second entry, we do not need to check whether
+we have matched the first one - the source addresses are completely
+different. We call such an ACE *independent* from another.
+
+We can define this as
+
+```
+independent(aceA, aceB) := (!intersect(protoA, protoB) ||
+ !intersect(srcA, srcB) ||
+ !intersect(dstA, dstB))
+```
+
+where intersect is defined as operation returning true if there are
+elements belonging to the sets of both arguments.
+
+If the entry A is neither redundant nor independent from B, and is below
+B in the ruleset, we call such an entry *shadowed* by B, here is an example:
+
+```
+deny tcp 2001:db8:1::/48 2001:db8:2::/48 (B)
+permit 2001:d8b:1:1::/64 2001:db8:2:1::/64 (A)
+```
+
+This means the earlier rule "carves out" a subset of A, thus leaving
+a "shadow". (Evidently, the action needs to be different for the shadow
+to have an effect, but for for the terminology sake we do not care).
+
+The more formal definition:
+
+```
+shadowed(aceA, aceB) := !redundante(aceA, aceB) &&
+ !independent(aceA, aceB) &&
+ is_after(aceA, aceB)
+```
+
+Using this terminology, any ruleset can be represented as
+a DAG (Directed Acyclic Graph), with the bottom being the implicit
+"deny any", pointing to the set of rules shadowing it or the ones
+it is redundant for.
+
+These rules may in turn be shadowing each other. There is no cycles in
+this graph because of the natural order of the rules - the rule located
+closer to the end of the ruleset can never shadow or make redundant a rule
+higher up.
+
+The optimization that enables can allow for is to skip matching certain
+masks on a per-lookup basis - if a given rule has matched,
+the only adjustments that can happen is the match with one of
+the shadowing rules.
+
+Also, another avenue for the optimization can be starting the lookup process
+with the mask type that maximizes the chances of the independent ACE match,
+thus resulting in an ACE lookup being a single hash table hit.
+
+
+Plumbing
+--------
+
+All the new routines are located in a separate file,
+so we can cleanly experiment with a different approach if this
+does not fit all of the use cases.
+
+The constant-time lookup within the data path has the API with
+the same signature as:
+
+```
+u8
+multi_acl_match_5tuple (u32 sw_if_index, fa_5tuple_t * pkt_5tuple, int is_l2,
+ int is_ip6, int is_input, u32 * acl_match_p,
+ u32 * rule_match_p, u32 * trace_bitmap)
+```
+
+There should be a new upper-level function with the same signature, which
+will make a decision whether to use a linear lookup, or to use the
+constant-time lookup implemented by this work, or to add some other
+optimizations (e.g. by keeping the cache of the last N lookups).
+
+The calls to the routine doing preparatory work should happen
+in `acl_add_list()` after creating the linear-lookup structures,
+and the routine doing the preparatory work populating the hashtable
+should be called from `acl_interface_add_del_inout_acl()` or its callees.
+
+The initial implementation will be geared towards looking up a single
+match at a time, with the subsequent optimizations possible to make
+the lookup for more than one packet.
+