aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/cli.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/plugins/dpdk/device/cli.c')
-rw-r--r--src/plugins/dpdk/device/cli.c2079
1 files changed, 2079 insertions, 0 deletions
diff --git a/src/plugins/dpdk/device/cli.c b/src/plugins/dpdk/device/cli.c
new file mode 100644
index 00000000000..d2def2fcd67
--- /dev/null
+++ b/src/plugins/dpdk/device/cli.c
@@ -0,0 +1,2079 @@
+/*
+ * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <vnet/vnet.h>
+#include <vppinfra/vec.h>
+#include <vppinfra/error.h>
+#include <vppinfra/format.h>
+#include <vppinfra/xxhash.h>
+
+#include <vnet/ethernet/ethernet.h>
+#include <dpdk/device/dpdk.h>
+#include <vnet/classify/vnet_classify.h>
+#include <vnet/mpls/packet.h>
+
+#include <dpdk/device/dpdk_priv.h>
+
+/**
+ * @file
+ * @brief CLI for DPDK Abstraction Layer and pcap Tx Trace.
+ *
+ * This file contains the source code for CLI for DPDK
+ * Abstraction Layer and pcap Tx Trace.
+ */
+
+
+static clib_error_t *
+get_hqos (u32 hw_if_index, u32 subport_id, dpdk_device_t ** xd,
+ dpdk_device_config_t ** devconf)
+{
+ dpdk_main_t *dm = &dpdk_main;
+ vnet_hw_interface_t *hw;
+ struct rte_eth_dev_info dev_info;
+ uword *p = 0;
+ clib_error_t *error = NULL;
+
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+
+ if (subport_id != 0)
+ {
+ error = clib_error_return (0, "Invalid subport");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ *xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ rte_eth_dev_info_get ((*xd)->device_index, &dev_info);
+ if (dev_info.pci_dev)
+ { /* bonded interface has no pci info */
+ vlib_pci_addr_t pci_addr;
+
+ pci_addr.domain = dev_info.pci_dev->addr.domain;
+ pci_addr.bus = dev_info.pci_dev->addr.bus;
+ pci_addr.slot = dev_info.pci_dev->addr.devid;
+ pci_addr.function = dev_info.pci_dev->addr.function;
+
+ p =
+ hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
+ }
+
+ if (p)
+ (*devconf) = pool_elt_at_index (dm->conf->dev_confs, p[0]);
+ else
+ (*devconf) = &dm->conf->default_devconf;
+
+done:
+ return error;
+}
+
+static clib_error_t *
+pcap_trace_command_fn (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+#define PCAP_DEF_PKT_TO_CAPTURE (100)
+
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ u8 *filename;
+ u8 *chroot_filename = 0;
+ u32 max = 0;
+ int enabled = 0;
+ int errorFlag = 0;
+ clib_error_t *error = 0;
+
+ /* Get a line of input. */
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (line_input, "on"))
+ {
+ if (dm->tx_pcap_enable == 0)
+ {
+ enabled = 1;
+ }
+ else
+ {
+ vlib_cli_output (vm, "pcap tx capture already on...");
+ errorFlag = 1;
+ break;
+ }
+ }
+ else if (unformat (line_input, "off"))
+ {
+ if (dm->tx_pcap_enable)
+ {
+ vlib_cli_output (vm, "captured %d pkts...",
+ dm->pcap_main.n_packets_captured + 1);
+ if (dm->pcap_main.n_packets_captured)
+ {
+ dm->pcap_main.n_packets_to_capture =
+ dm->pcap_main.n_packets_captured;
+ error = pcap_write (&dm->pcap_main);
+ if (error)
+ clib_error_report (error);
+ else
+ vlib_cli_output (vm, "saved to %s...", dm->pcap_filename);
+ }
+
+ dm->tx_pcap_enable = 0;
+ }
+ else
+ {
+ vlib_cli_output (vm, "pcap tx capture already off...");
+ errorFlag = 1;
+ break;
+ }
+ }
+ else if (unformat (line_input, "max %d", &max))
+ {
+ if (dm->tx_pcap_enable)
+ {
+ vlib_cli_output (vm,
+ "can't change max value while pcap tx capture active...");
+ errorFlag = 1;
+ break;
+ }
+ }
+ else if (unformat (line_input, "intfc %U",
+ unformat_vnet_sw_interface, dm->vnet_main,
+ &dm->pcap_sw_if_index))
+ ;
+
+ else if (unformat (line_input, "intfc any"))
+ {
+ dm->pcap_sw_if_index = 0;
+ }
+ else if (unformat (line_input, "file %s", &filename))
+ {
+ if (dm->tx_pcap_enable)
+ {
+ vlib_cli_output (vm,
+ "can't change file while pcap tx capture active...");
+ errorFlag = 1;
+ break;
+ }
+
+ /* Brain-police user path input */
+ if (strstr ((char *) filename, "..")
+ || index ((char *) filename, '/'))
+ {
+ vlib_cli_output (vm, "illegal characters in filename '%s'",
+ filename);
+ vlib_cli_output (vm,
+ "Hint: Only filename, do not enter directory structure.");
+ vec_free (filename);
+ errorFlag = 1;
+ break;
+ }
+
+ chroot_filename = format (0, "/tmp/%s%c", filename, 0);
+ vec_free (filename);
+ }
+ else if (unformat (line_input, "status"))
+ {
+ if (dm->pcap_sw_if_index == 0)
+ {
+ vlib_cli_output (vm, "max is %d for any interface to file %s",
+ dm->
+ pcap_pkts_to_capture ? dm->pcap_pkts_to_capture
+ : PCAP_DEF_PKT_TO_CAPTURE,
+ dm->
+ pcap_filename ? dm->pcap_filename : (u8 *)
+ "/tmp/vpe.pcap");
+ }
+ else
+ {
+ vlib_cli_output (vm, "max is %d for interface %U to file %s",
+ dm->
+ pcap_pkts_to_capture ? dm->pcap_pkts_to_capture
+ : PCAP_DEF_PKT_TO_CAPTURE,
+ format_vnet_sw_if_index_name, dm->vnet_main,
+ dm->pcap_sw_if_index,
+ dm->
+ pcap_filename ? dm->pcap_filename : (u8 *)
+ "/tmp/vpe.pcap");
+ }
+
+ if (dm->tx_pcap_enable == 0)
+ {
+ vlib_cli_output (vm, "pcap tx capture is off...");
+ }
+ else
+ {
+ vlib_cli_output (vm, "pcap tx capture is on: %d of %d pkts...",
+ dm->pcap_main.n_packets_captured,
+ dm->pcap_main.n_packets_to_capture);
+ }
+ break;
+ }
+
+ else
+ {
+ error = clib_error_return (0, "unknown input `%U'",
+ format_unformat_error, line_input);
+ errorFlag = 1;
+ break;
+ }
+ }
+ unformat_free (line_input);
+
+
+ if (errorFlag == 0)
+ {
+ /* Since no error, save configured values. */
+ if (chroot_filename)
+ {
+ if (dm->pcap_filename)
+ vec_free (dm->pcap_filename);
+ vec_add1 (chroot_filename, 0);
+ dm->pcap_filename = chroot_filename;
+ }
+
+ if (max)
+ dm->pcap_pkts_to_capture = max;
+
+
+ if (enabled)
+ {
+ if (dm->pcap_filename == 0)
+ dm->pcap_filename = format (0, "/tmp/vpe.pcap%c", 0);
+
+ memset (&dm->pcap_main, 0, sizeof (dm->pcap_main));
+ dm->pcap_main.file_name = (char *) dm->pcap_filename;
+ dm->pcap_main.n_packets_to_capture = PCAP_DEF_PKT_TO_CAPTURE;
+ if (dm->pcap_pkts_to_capture)
+ dm->pcap_main.n_packets_to_capture = dm->pcap_pkts_to_capture;
+
+ dm->pcap_main.packet_type = PCAP_PACKET_TYPE_ethernet;
+ dm->tx_pcap_enable = 1;
+ vlib_cli_output (vm, "pcap tx capture on...");
+ }
+ }
+ else if (chroot_filename)
+ vec_free (chroot_filename);
+
+
+ return error;
+}
+
+/*?
+ * This command is used to start or stop a packet capture, or show
+ * the status of packet capture.
+ *
+ * This command has the following optional parameters:
+ *
+ * - <b>on|off</b> - Used to start or stop a packet capture.
+ *
+ * - <b>max <nn></b> - Depth of local buffer. Once '<em>nn</em>' number
+ * of packets have been received, buffer is flushed to file. Once another
+ * '<em>nn</em>' number of packets have been received, buffer is flushed
+ * to file, overwriting previous write. If not entered, value defaults
+ * to 100. Can only be updated if packet capture is off.
+ *
+ * - <b>intfc <interface>|any</b> - Used to specify a given interface,
+ * or use '<em>any</em>' to run packet capture on all interfaces.
+ * '<em>any</em>' is the default if not provided. Settings from a previous
+ * packet capture are preserved, so '<em>any</em>' can be used to reset
+ * the interface setting.
+ *
+ * - <b>file <name></b> - Used to specify the output filename. The file will
+ * be placed in the '<em>/tmp</em>' directory, so only the filename is
+ * supported. Directory should not be entered. If file already exists, file
+ * will be overwritten. If no filename is provided, '<em>/tmp/vpe.pcap</em>'
+ * will be used. Can only be updated if packet capture is off.
+ *
+ * - <b>status</b> - Displays the current status and configured attributes
+ * associated with a packet capture. If packet capture is in progress,
+ * '<em>status</em>' also will return the number of packets currently in
+ * the local buffer. All additional attributes entered on command line
+ * with '<em>status</em>' will be ingnored and not applied.
+ *
+ * @cliexpar
+ * Example of how to display the status of a tx packet capture when off:
+ * @cliexstart{pcap tx trace status}
+ * max is 100, for any interface to file /tmp/vpe.pcap
+ * pcap tx capture is off...
+ * @cliexend
+ * Example of how to start a tx packet capture:
+ * @cliexstart{pcap tx trace on max 35 intfc GigabitEthernet0/8/0 file vppTest.pcap}
+ * pcap tx capture on...
+ * @cliexend
+ * Example of how to display the status of a tx packet capture in progress:
+ * @cliexstart{pcap tx trace status}
+ * max is 35, for interface GigabitEthernet0/8/0 to file /tmp/vppTest.pcap
+ * pcap tx capture is on: 20 of 35 pkts...
+ * @cliexend
+ * Example of how to stop a tx packet capture:
+ * @cliexstart{vppctl pcap tx trace off}
+ * captured 21 pkts...
+ * saved to /tmp/vppTest.pcap...
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (pcap_trace_command, static) = {
+ .path = "pcap tx trace",
+ .short_help =
+ "pcap tx trace [on|off] [max <nn>] [intfc <interface>|any] [file <name>] [status]",
+ .function = pcap_trace_command_fn,
+};
+/* *INDENT-ON* */
+
+
+static clib_error_t *
+show_dpdk_buffer (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ struct rte_mempool *rmp;
+ int i;
+
+ for (i = 0; i < vec_len (dpdk_main.pktmbuf_pools); i++)
+ {
+ rmp = dpdk_main.pktmbuf_pools[i];
+ if (rmp)
+ {
+ unsigned count = rte_mempool_avail_count (rmp);
+ unsigned free_count = rte_mempool_in_use_count (rmp);
+
+ vlib_cli_output (vm,
+ "name=\"%s\" available = %7d allocated = %7d total = %7d\n",
+ rmp->name, (u32) count, (u32) free_count,
+ (u32) (count + free_count));
+ }
+ else
+ {
+ vlib_cli_output (vm, "rte_mempool is NULL (!)\n");
+ }
+ }
+ return 0;
+}
+
+/*?
+ * This command displays statistics of each DPDK mempool.
+ *
+ * @cliexpar
+ * Example of how to display DPDK buffer data:
+ * @cliexstart{show dpdk buffer}
+ * name="mbuf_pool_socket0" available = 15104 allocated = 1280 total = 16384
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_show_dpdk_bufferr,static) = {
+ .path = "show dpdk buffer",
+ .short_help = "show dpdk buffer",
+ .function = show_dpdk_buffer,
+ .is_mp_safe = 1,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+test_dpdk_buffer (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ static u32 *allocated_buffers;
+ u32 n_alloc = 0;
+ u32 n_free = 0;
+ u32 first, actual_alloc;
+
+ while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (input, "allocate %d", &n_alloc))
+ ;
+ else if (unformat (input, "free %d", &n_free))
+ ;
+ else
+ break;
+ }
+
+ if (n_free)
+ {
+ if (vec_len (allocated_buffers) < n_free)
+ return clib_error_return (0, "Can't free %d, only %d allocated",
+ n_free, vec_len (allocated_buffers));
+
+ first = vec_len (allocated_buffers) - n_free;
+ vlib_buffer_free (vm, allocated_buffers + first, n_free);
+ _vec_len (allocated_buffers) = first;
+ }
+ if (n_alloc)
+ {
+ first = vec_len (allocated_buffers);
+ vec_validate (allocated_buffers,
+ vec_len (allocated_buffers) + n_alloc - 1);
+
+ actual_alloc = vlib_buffer_alloc (vm, allocated_buffers + first,
+ n_alloc);
+ _vec_len (allocated_buffers) = first + actual_alloc;
+
+ if (actual_alloc < n_alloc)
+ vlib_cli_output (vm, "WARNING: only allocated %d buffers",
+ actual_alloc);
+ }
+
+ vlib_cli_output (vm, "Currently %d buffers allocated",
+ vec_len (allocated_buffers));
+
+ if (allocated_buffers && vec_len (allocated_buffers) == 0)
+ vec_free (allocated_buffers);
+
+ return 0;
+}
+
+/*?
+ * This command tests the allocation and freeing of DPDK buffers.
+ * If both '<em>allocate</em>' and '<em>free</em>' are entered on the
+ * same command, the '<em>free</em>' is executed first. If no
+ * parameters are provided, this command display how many DPDK buffers
+ * the test command has allocated.
+ *
+ * @cliexpar
+ * @parblock
+ *
+ * Example of how to display how many DPDK buffer test command has allcoated:
+ * @cliexstart{test dpdk buffer}
+ * Currently 0 buffers allocated
+ * @cliexend
+ *
+ * Example of how to allocate DPDK buffers using the test command:
+ * @cliexstart{test dpdk buffer allocate 10}
+ * Currently 10 buffers allocated
+ * @cliexend
+ *
+ * Example of how to free DPDK buffers allocated by the test command:
+ * @cliexstart{test dpdk buffer free 10}
+ * Currently 0 buffers allocated
+ * @cliexend
+ * @endparblock
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_test_dpdk_buffer,static) = {
+ .path = "test dpdk buffer",
+ .short_help = "test dpdk buffer [allocate <nn>] [free <nn>]",
+ .function = test_dpdk_buffer,
+ .is_mp_safe = 1,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_desc (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 nb_rx_desc = (u32) ~ 0;
+ u32 nb_tx_desc = (u32) ~ 0;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "tx %d", &nb_tx_desc))
+ ;
+ else if (unformat (line_input, "rx %d", &nb_rx_desc))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ if ((xd->flags & DPDK_DEVICE_FLAG_PMD) == 0)
+ {
+ error =
+ clib_error_return (0,
+ "number of descriptors can be set only for "
+ "physical devices");
+ goto done;
+ }
+
+ if ((nb_rx_desc == (u32) ~ 0 || nb_rx_desc == xd->nb_rx_desc) &&
+ (nb_tx_desc == (u32) ~ 0 || nb_tx_desc == xd->nb_tx_desc))
+ {
+ error = clib_error_return (0, "nothing changed");
+ goto done;
+ }
+
+ if (nb_rx_desc != (u32) ~ 0)
+ xd->nb_rx_desc = nb_rx_desc;
+
+ if (nb_tx_desc != (u32) ~ 0)
+ xd->nb_tx_desc = nb_tx_desc;
+
+ error = dpdk_port_setup (dm, xd);
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command sets the number of DPDK '<em>rx</em>' and
+ * '<em>tx</em>' descriptors for the given physical interface. Use
+ * the command '<em>show hardware-interface</em>' to display the
+ * current descriptor allocation.
+ *
+ * @cliexpar
+ * Example of how to set the DPDK interface descriptors:
+ * @cliexcmd{set dpdk interface descriptors GigabitEthernet0/8/0 rx 512 tx 512}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_desc,static) = {
+ .path = "set dpdk interface descriptors",
+ .short_help = "set dpdk interface descriptors <interface> [rx <nn>] [tx <nn>]",
+ .function = set_dpdk_if_desc,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_dpdk_if_placement (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ vlib_thread_main_t *tm = vlib_get_thread_main ();
+ dpdk_main_t *dm = &dpdk_main;
+ dpdk_device_and_queue_t *dq;
+ int cpu;
+
+ if (tm->n_vlib_mains == 1)
+ vlib_cli_output (vm, "All interfaces are handled by main thread");
+
+ for (cpu = 0; cpu < vec_len (dm->devices_by_cpu); cpu++)
+ {
+ if (cpu >= dm->input_cpu_first_index &&
+ cpu < (dm->input_cpu_first_index + dm->input_cpu_count))
+ vlib_cli_output (vm, "Thread %u (%s at lcore %u):", cpu,
+ vlib_worker_threads[cpu].name,
+ vlib_worker_threads[cpu].lcore_id);
+
+ /* *INDENT-OFF* */
+ vec_foreach(dq, dm->devices_by_cpu[cpu])
+ {
+ u32 hw_if_index = dm->devices[dq->device].vlib_hw_if_index;
+ vnet_hw_interface_t * hi = vnet_get_hw_interface(dm->vnet_main, hw_if_index);
+ vlib_cli_output(vm, " %v queue %u", hi->name, dq->queue_id);
+ }
+ /* *INDENT-ON* */
+ }
+ return 0;
+}
+
+/*?
+ * This command is used to display the thread and core each
+ * DPDK interface and queue is assigned too.
+ *
+ * @cliexpar
+ * Example of how to display the DPDK interface placement:
+ * @cliexstart{show dpdk interface placement}
+ * Thread 1 (vpp_wk_0 at lcore 1):
+ * GigabitEthernet0/8/0 queue 0
+ * GigabitEthernet0/9/0 queue 0
+ * Thread 2 (vpp_wk_1 at lcore 2):
+ * GigabitEthernet0/8/0 queue 1
+ * GigabitEthernet0/9/0 queue 1
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_show_dpdk_if_placement,static) = {
+ .path = "show dpdk interface placement",
+ .short_help = "show dpdk interface placement",
+ .function = show_dpdk_if_placement,
+};
+/* *INDENT-ON* */
+
+static int
+dpdk_device_queue_sort (void *a1, void *a2)
+{
+ dpdk_device_and_queue_t *dq1 = a1;
+ dpdk_device_and_queue_t *dq2 = a2;
+
+ if (dq1->device > dq2->device)
+ return 1;
+ else if (dq1->device < dq2->device)
+ return -1;
+ else if (dq1->queue_id > dq2->queue_id)
+ return 1;
+ else if (dq1->queue_id < dq2->queue_id)
+ return -1;
+ else
+ return 0;
+}
+
+static clib_error_t *
+set_dpdk_if_placement (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ dpdk_device_and_queue_t *dq;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 queue = (u32) 0;
+ u32 cpu = (u32) ~ 0;
+ int i;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "queue %d", &queue))
+ ;
+ else if (unformat (line_input, "thread %d", &cpu))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+
+ if (cpu < dm->input_cpu_first_index ||
+ cpu >= (dm->input_cpu_first_index + dm->input_cpu_count))
+ {
+ error = clib_error_return (0, "please specify valid thread id");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ for (i = 0; i < vec_len (dm->devices_by_cpu); i++)
+ {
+ /* *INDENT-OFF* */
+ vec_foreach(dq, dm->devices_by_cpu[i])
+ {
+ if (hw_if_index == dm->devices[dq->device].vlib_hw_if_index &&
+ queue == dq->queue_id)
+ {
+ if (cpu == i) /* nothing to do */
+ goto done;
+
+ vec_del1(dm->devices_by_cpu[i], dq - dm->devices_by_cpu[i]);
+ vec_add2(dm->devices_by_cpu[cpu], dq, 1);
+ dq->queue_id = queue;
+ dq->device = xd->device_index;
+ xd->cpu_socket_id_by_queue[queue] =
+ rte_lcore_to_socket_id(vlib_worker_threads[cpu].lcore_id);
+
+ vec_sort_with_function(dm->devices_by_cpu[i],
+ dpdk_device_queue_sort);
+
+ vec_sort_with_function(dm->devices_by_cpu[cpu],
+ dpdk_device_queue_sort);
+
+ if (vec_len(dm->devices_by_cpu[i]) == 0)
+ vlib_node_set_state (vlib_mains[i], dpdk_input_node.index,
+ VLIB_NODE_STATE_DISABLED);
+
+ if (vec_len(dm->devices_by_cpu[cpu]) == 1)
+ vlib_node_set_state (vlib_mains[cpu], dpdk_input_node.index,
+ VLIB_NODE_STATE_POLLING);
+
+ goto done;
+ }
+ }
+ /* *INDENT-ON* */
+ }
+
+ error = clib_error_return (0, "not found");
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to assign a given interface, and optionally a
+ * given queue, to a different thread. This will not create a thread,
+ * so the thread must already exist. Use '<em>/etc/vpp/startup.conf</em>'
+ * for the initial thread creation. If the '<em>queue</em>' is not provided,
+ * it defaults to 0.
+ *
+ * @cliexpar
+ * Example of how to display the DPDK interface placement:
+ * @cliexstart{show dpdk interface placement}
+ * Thread 1 (vpp_wk_0 at lcore 1):
+ * GigabitEthernet0/8/0 queue 0
+ * GigabitEthernet0/9/0 queue 0
+ * Thread 2 (vpp_wk_1 at lcore 2):
+ * GigabitEthernet0/8/0 queue 1
+ * GigabitEthernet0/9/0 queue 1
+ * @cliexend
+ * Example of how to assign a DPDK interface and queue to a thread:
+ * @cliexcmd{set dpdk interface placement GigabitEthernet0/8/0 queue 1 thread 1}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_placement,static) = {
+ .path = "set dpdk interface placement",
+ .short_help = "set dpdk interface placement <interface> [queue <n>] thread <n>",
+ .function = set_dpdk_if_placement,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_dpdk_if_hqos_placement (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ vlib_thread_main_t *tm = vlib_get_thread_main ();
+ dpdk_main_t *dm = &dpdk_main;
+ dpdk_device_and_queue_t *dq;
+ int cpu;
+
+ if (tm->n_vlib_mains == 1)
+ vlib_cli_output (vm, "All interfaces are handled by main thread");
+
+ for (cpu = 0; cpu < vec_len (dm->devices_by_hqos_cpu); cpu++)
+ {
+ if (cpu >= dm->hqos_cpu_first_index &&
+ cpu < (dm->hqos_cpu_first_index + dm->hqos_cpu_count))
+ vlib_cli_output (vm, "Thread %u (%s at lcore %u):", cpu,
+ vlib_worker_threads[cpu].name,
+ vlib_worker_threads[cpu].lcore_id);
+
+ vec_foreach (dq, dm->devices_by_hqos_cpu[cpu])
+ {
+ u32 hw_if_index = dm->devices[dq->device].vlib_hw_if_index;
+ vnet_hw_interface_t *hi =
+ vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ vlib_cli_output (vm, " %v queue %u", hi->name, dq->queue_id);
+ }
+ }
+ return 0;
+}
+
+/*?
+ * This command is used to display the thread and core each
+ * DPDK output interface and HQoS queue is assigned too.
+ *
+ * @cliexpar
+ * Example of how to display the DPDK output interface and HQoS queue placement:
+ * @cliexstart{show dpdk interface hqos placement}
+ * Thread 1 (vpp_hqos-threads_0 at lcore 3):
+ * GigabitEthernet0/8/0 queue 0
+ * Thread 2 (vpp_hqos-threads_1 at lcore 4):
+ * GigabitEthernet0/9/0 queue 0
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_show_dpdk_if_hqos_placement, static) = {
+ .path = "show dpdk interface hqos placement",
+ .short_help = "show dpdk interface hqos placement",
+ .function = show_dpdk_if_hqos_placement,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_hqos_placement (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ dpdk_device_and_queue_t *dq;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 cpu = (u32) ~ 0;
+ int i;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "thread %d", &cpu))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ return clib_error_return (0, "please specify valid interface name");
+
+ if (cpu < dm->hqos_cpu_first_index ||
+ cpu >= (dm->hqos_cpu_first_index + dm->hqos_cpu_count))
+ {
+ error = clib_error_return (0, "please specify valid thread id");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ for (i = 0; i < vec_len (dm->devices_by_hqos_cpu); i++)
+ {
+ vec_foreach (dq, dm->devices_by_hqos_cpu[i])
+ {
+ if (hw_if_index == dm->devices[dq->device].vlib_hw_if_index)
+ {
+ if (cpu == i) /* nothing to do */
+ goto done;
+
+ vec_del1 (dm->devices_by_hqos_cpu[i],
+ dq - dm->devices_by_hqos_cpu[i]);
+ vec_add2 (dm->devices_by_hqos_cpu[cpu], dq, 1);
+ dq->queue_id = 0;
+ dq->device = xd->device_index;
+
+ vec_sort_with_function (dm->devices_by_hqos_cpu[i],
+ dpdk_device_queue_sort);
+
+ vec_sort_with_function (dm->devices_by_hqos_cpu[cpu],
+ dpdk_device_queue_sort);
+
+ goto done;
+ }
+ }
+ }
+
+ error = clib_error_return (0, "not found");
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to assign a given DPDK output interface and
+ * HQoS queue to a different thread. This will not create a thread,
+ * so the thread must already exist. Use '<em>/etc/vpp/startup.conf</em>'
+ * for the initial thread creation. See @ref qos_doc for more details.
+ *
+ * @cliexpar
+ * Example of how to display the DPDK output interface and HQoS queue placement:
+ * @cliexstart{show dpdk interface hqos placement}
+ * Thread 1 (vpp_hqos-threads_0 at lcore 3):
+ * GigabitEthernet0/8/0 queue 0
+ * Thread 2 (vpp_hqos-threads_1 at lcore 4):
+ * GigabitEthernet0/9/0 queue 0
+ * @cliexend
+ * Example of how to assign a DPDK output interface and HQoS queue to a thread:
+ * @cliexcmd{set dpdk interface hqos placement GigabitEthernet0/8/0 thread 2}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_hqos_placement, static) = {
+ .path = "set dpdk interface hqos placement",
+ .short_help = "set dpdk interface hqos placement <interface> thread <n>",
+ .function = set_dpdk_if_hqos_placement,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_hqos_pipe (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 subport_id = (u32) ~ 0;
+ u32 pipe_id = (u32) ~ 0;
+ u32 profile_id = (u32) ~ 0;
+ int rv;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "subport %d", &subport_id))
+ ;
+ else if (unformat (line_input, "pipe %d", &pipe_id))
+ ;
+ else if (unformat (line_input, "profile %d", &profile_id))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ rv =
+ rte_sched_pipe_config (xd->hqos_ht->hqos, subport_id, pipe_id,
+ profile_id);
+ if (rv)
+ {
+ error = clib_error_return (0, "pipe configuration failed");
+ goto done;
+ }
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to change the profile associate with a HQoS pipe. The
+ * '<em><profile_id></em>' is zero based. Use the command
+ * '<em>show dpdk interface hqos</em>' to display the content of each profile.
+ * See @ref qos_doc for more details.
+ *
+ * @note
+ * Currently there is not an API to create a new HQoS pipe profile. One is
+ * created by default in the code (search for '<em>hqos_pipe_params_default</em>'').
+ * Additional profiles can be created in code and code recompiled. Then use this
+ * command to assign it.
+ *
+ * @cliexpar
+ * Example of how to assign a new profile to a HQoS pipe:
+ * @cliexcmd{set dpdk interface hqos pipe GigabitEthernet0/8/0 subport 0 pipe 2 profile 1}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_hqos_pipe, static) =
+{
+ .path = "set dpdk interface hqos pipe",
+ .short_help = "set dpdk interface hqos pipe <interface> subport <subport_id> pipe <pipe_id> "
+ "profile <profile_id>",
+ .function = set_dpdk_if_hqos_pipe,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_hqos_subport (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ dpdk_main_t *dm = &dpdk_main;
+ dpdk_device_t *xd = NULL;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 subport_id = (u32) ~ 0;
+ struct rte_sched_subport_params p;
+ int rv;
+ clib_error_t *error = NULL;
+ u32 tb_rate = (u32) ~ 0;
+ u32 tb_size = (u32) ~ 0;
+ u32 tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE] =
+ { (u32) ~ 0, (u32) ~ 0, (u32) ~ 0, (u32) ~ 0 };
+ u32 tc_period = (u32) ~ 0;
+ dpdk_device_config_t *devconf = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "subport %d", &subport_id))
+ ;
+ else if (unformat (line_input, "rate %d", &tb_rate))
+ ;
+ else if (unformat (line_input, "bktsize %d", &tb_size))
+ ;
+ else if (unformat (line_input, "tc0 %d", &tc_rate[0]))
+ ;
+ else if (unformat (line_input, "tc1 %d", &tc_rate[1]))
+ ;
+ else if (unformat (line_input, "tc2 %d", &tc_rate[2]))
+ ;
+ else if (unformat (line_input, "tc3 %d", &tc_rate[3]))
+ ;
+ else if (unformat (line_input, "period %d", &tc_period))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ error = get_hqos (hw_if_index, subport_id, &xd, &devconf);
+
+ if (error == NULL)
+ {
+ /* Copy the current values over to local structure. */
+ memcpy (&p, &devconf->hqos.subport[subport_id], sizeof (p));
+
+ /* Update local structure with input values. */
+ if (tb_rate != (u32) ~ 0)
+ {
+ p.tb_rate = tb_rate;
+ p.tc_rate[0] = tb_rate;
+ p.tc_rate[1] = tb_rate;
+ p.tc_rate[2] = tb_rate;
+ p.tc_rate[3] = tb_rate;
+ }
+ if (tb_size != (u32) ~ 0)
+ {
+ p.tb_size = tb_size;
+ }
+ if (tc_rate[0] != (u32) ~ 0)
+ {
+ p.tc_rate[0] = tc_rate[0];
+ }
+ if (tc_rate[1] != (u32) ~ 0)
+ {
+ p.tc_rate[1] = tc_rate[1];
+ }
+ if (tc_rate[2] != (u32) ~ 0)
+ {
+ p.tc_rate[2] = tc_rate[2];
+ }
+ if (tc_rate[3] != (u32) ~ 0)
+ {
+ p.tc_rate[3] = tc_rate[3];
+ }
+ if (tc_period != (u32) ~ 0)
+ {
+ p.tc_period = tc_period;
+ }
+
+ /* Apply changes. */
+ rv = rte_sched_subport_config (xd->hqos_ht->hqos, subport_id, &p);
+ if (rv)
+ {
+ error = clib_error_return (0, "subport configuration failed");
+ goto done;
+ }
+ else
+ {
+ /* Successfully applied, so save of the input values. */
+ memcpy (&devconf->hqos.subport[subport_id], &p, sizeof (p));
+ }
+ }
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to set the subport level parameters such as token
+ * bucket rate (bytes per seconds), token bucket size (bytes), traffic class
+ * rates (bytes per seconds) and token update period (Milliseconds).
+ *
+ * By default, the '<em>rate</em>' is set to 1250000000 bytes/second (10GbE
+ * rate) and each of the four traffic classes is set to 100% of the port rate.
+ * If the '<em>rate</em>' is updated by this command, all four traffic classes
+ * are assigned the same value. Each of the four traffic classes can be updated
+ * individually.
+ *
+ * @cliexpar
+ * Example of how modify the subport attributes for a 1GbE link:
+ * @cliexcmd{set dpdk interface hqos subport GigabitEthernet0/8/0 subport 0 rate 125000000}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_hqos_subport, static) = {
+ .path = "set dpdk interface hqos subport",
+ .short_help = "set dpdk interface hqos subport <interface> subport <subport_id> "
+ "[rate <n>] [bktsize <n>] [tc0 <n>] [tc1 <n>] [tc2 <n>] [tc3 <n>] "
+ "[period <n>]",
+ .function = set_dpdk_if_hqos_subport,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_hqos_tctbl (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vlib_thread_main_t *tm = vlib_get_thread_main ();
+ dpdk_main_t *dm = &dpdk_main;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 tc = (u32) ~ 0;
+ u32 queue = (u32) ~ 0;
+ u32 entry = (u32) ~ 0;
+ u32 val, i;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "entry %d", &entry))
+ ;
+ else if (unformat (line_input, "tc %d", &tc))
+ ;
+ else if (unformat (line_input, "queue %d", &queue))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+ if (entry >= 64)
+ {
+ error = clib_error_return (0, "invalid entry");
+ goto done;
+ }
+ if (tc >= RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE)
+ {
+ error = clib_error_return (0, "invalid traffic class");
+ goto done;
+ }
+ if (queue >= RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS)
+ {
+ error = clib_error_return (0, "invalid traffic class queue");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ /* Detect the set of worker threads */
+ uword *p = hash_get_mem (tm->thread_registrations_by_name, "workers");
+ /* Should never happen, shut up Coverity warning */
+ if (p == 0)
+ {
+ error = clib_error_return (0, "no worker registrations?");
+ goto done;
+ }
+
+ vlib_thread_registration_t *tr = (vlib_thread_registration_t *) p[0];
+ int worker_thread_first = tr->first_index;
+ int worker_thread_count = tr->count;
+
+ val = tc * RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS + queue;
+ for (i = 0; i < worker_thread_count; i++)
+ xd->hqos_wt[worker_thread_first + i].hqos_tc_table[entry] = val;
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to set the traffic class translation table. The
+ * traffic class translation table is used to map 64 values (0-63) to one of
+ * four traffic class and one of four HQoS input queue. Use the '<em>show
+ * dpdk interface hqos</em>' command to display the traffic class translation
+ * table. See @ref qos_doc for more details.
+ *
+ * This command has the following parameters:
+ *
+ * - <b><interface></b> - Used to specify the output interface.
+ *
+ * - <b>entry <map_val></b> - Mapped value (0-63) to assign traffic class and queue to.
+ *
+ * - <b>tc <tc_id></b> - Traffic class (0-3) to be used by the provided mapped value.
+ *
+ * - <b>queue <queue_id></b> - HQoS input queue (0-3) to be used by the provided mapped value.
+ *
+ * @cliexpar
+ * Example of how modify the traffic class translation table:
+ * @cliexcmd{set dpdk interface hqos tctbl GigabitEthernet0/8/0 entry 16 tc 2 queue 2}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_hqos_tctbl, static) = {
+ .path = "set dpdk interface hqos tctbl",
+ .short_help = "set dpdk interface hqos tctbl <interface> entry <map_val> tc <tc_id> queue <queue_id>",
+ .function = set_dpdk_if_hqos_tctbl,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+set_dpdk_if_hqos_pktfield (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vlib_thread_main_t *tm = vlib_get_thread_main ();
+ dpdk_main_t *dm = &dpdk_main;
+ clib_error_t *error = NULL;
+
+ /* Device specific data */
+ struct rte_eth_dev_info dev_info;
+ dpdk_device_config_t *devconf = 0;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ u32 hw_if_index = (u32) ~ 0;
+
+ /* Detect the set of worker threads */
+ uword *p = hash_get_mem (tm->thread_registrations_by_name, "workers");
+ /* Should never happen, shut up Coverity warning */
+ if (p == 0)
+ return clib_error_return (0, "no worker registrations?");
+
+ vlib_thread_registration_t *tr = (vlib_thread_registration_t *) p[0];
+ int worker_thread_first = tr->first_index;
+ int worker_thread_count = tr->count;
+
+ /* Packet field configuration */
+ u64 mask = (u64) ~ 0;
+ u32 id = (u32) ~ 0;
+ u32 offset = (u32) ~ 0;
+
+ /* HQoS params */
+ u32 n_subports_per_port, n_pipes_per_subport, tctbl_size;
+
+ u32 i;
+
+ /* Parse input arguments */
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else if (unformat (line_input, "id subport"))
+ id = 0;
+ else if (unformat (line_input, "id pipe"))
+ id = 1;
+ else if (unformat (line_input, "id tc"))
+ id = 2;
+ else if (unformat (line_input, "id %d", &id))
+ ;
+ else if (unformat (line_input, "offset %d", &offset))
+ ;
+ else if (unformat (line_input, "mask %llx", &mask))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ /* Get interface */
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify valid interface name");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ rte_eth_dev_info_get (xd->device_index, &dev_info);
+ if (dev_info.pci_dev)
+ { /* bonded interface has no pci info */
+ vlib_pci_addr_t pci_addr;
+
+ pci_addr.domain = dev_info.pci_dev->addr.domain;
+ pci_addr.bus = dev_info.pci_dev->addr.bus;
+ pci_addr.slot = dev_info.pci_dev->addr.devid;
+ pci_addr.function = dev_info.pci_dev->addr.function;
+
+ p =
+ hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
+ }
+
+ if (p)
+ devconf = pool_elt_at_index (dm->conf->dev_confs, p[0]);
+ else
+ devconf = &dm->conf->default_devconf;
+
+ if (devconf->hqos_enabled == 0)
+ {
+ vlib_cli_output (vm, "HQoS disabled for this interface");
+ goto done;
+ }
+
+ n_subports_per_port = devconf->hqos.port.n_subports_per_port;
+ n_pipes_per_subport = devconf->hqos.port.n_pipes_per_subport;
+ tctbl_size = RTE_DIM (devconf->hqos.tc_table);
+
+ /* Validate packet field configuration: id, offset and mask */
+ if (id >= 3)
+ {
+ error = clib_error_return (0, "invalid packet field id");
+ goto done;
+ }
+
+ switch (id)
+ {
+ case 0:
+ if (dpdk_hqos_validate_mask (mask, n_subports_per_port) != 0)
+ {
+ error = clib_error_return (0, "invalid subport ID mask "
+ "(n_subports_per_port = %u)",
+ n_subports_per_port);
+ goto done;
+ }
+ break;
+ case 1:
+ if (dpdk_hqos_validate_mask (mask, n_pipes_per_subport) != 0)
+ {
+ error = clib_error_return (0, "invalid pipe ID mask "
+ "(n_pipes_per_subport = %u)",
+ n_pipes_per_subport);
+ goto done;
+ }
+ break;
+ case 2:
+ default:
+ if (dpdk_hqos_validate_mask (mask, tctbl_size) != 0)
+ {
+ error = clib_error_return (0, "invalid TC table index mask "
+ "(TC table size = %u)", tctbl_size);
+ goto done;
+ }
+ }
+
+ /* Propagate packet field configuration to all workers */
+ for (i = 0; i < worker_thread_count; i++)
+ switch (id)
+ {
+ case 0:
+ xd->hqos_wt[worker_thread_first + i].hqos_field0_slabpos = offset;
+ xd->hqos_wt[worker_thread_first + i].hqos_field0_slabmask = mask;
+ xd->hqos_wt[worker_thread_first + i].hqos_field0_slabshr =
+ __builtin_ctzll (mask);
+ break;
+ case 1:
+ xd->hqos_wt[worker_thread_first + i].hqos_field1_slabpos = offset;
+ xd->hqos_wt[worker_thread_first + i].hqos_field1_slabmask = mask;
+ xd->hqos_wt[worker_thread_first + i].hqos_field1_slabshr =
+ __builtin_ctzll (mask);
+ break;
+ case 2:
+ default:
+ xd->hqos_wt[worker_thread_first + i].hqos_field2_slabpos = offset;
+ xd->hqos_wt[worker_thread_first + i].hqos_field2_slabmask = mask;
+ xd->hqos_wt[worker_thread_first + i].hqos_field2_slabshr =
+ __builtin_ctzll (mask);
+ }
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to set the packet fields required for classifiying the
+ * incoming packet. As a result of classification process, packet field
+ * information will be mapped to 5 tuples (subport, pipe, traffic class, pipe,
+ * color) and stored in packet mbuf.
+ *
+ * This command has the following parameters:
+ *
+ * - <b><interface></b> - Used to specify the output interface.
+ *
+ * - <b>id subport|pipe|tc</b> - Classification occurs across three fields.
+ * This parameter indicates which of the three masks are being configured. Legacy
+ * code used 0-2 to represent these three fields, so 0-2 is still accepted.
+ * - <b>subport|0</b> - Currently only one subport is supported, so only
+ * an empty mask is supported for the subport classification.
+ * - <b>pipe|1</b> - Currently, 4096 pipes per subport are supported, so a
+ * 12-bit mask should be configure to map to the 0-4095 pipes.
+ * - <b>tc|2</b> - The translation table (see '<em>set dpdk interface hqos
+ * tctbl</em>' command) maps each value (0-63) into one of the 4 traffic classes
+ * per pipe. A 6-bit mask should be configure to map this field to a traffic class.
+ *
+ * - <b>offset <n></b> - Offset in the packet to apply the 64-bit mask for classification.
+ * The offset should be on an 8-byte boundary (0,8,16,24..).
+ *
+ * - <b>mask <hex-mask></b> - 64-bit mask to apply to packet at the given '<em>offset</em>'.
+ * Bits must be contiguous and should not include '<em>0x</em>'.
+ *
+ * The default values for the '<em>pktfield</em>' assumes Ethernet/IPv4/UDP packets with
+ * no VLAN. Adjust based on expected packet format and desired classification field.
+ * - '<em>subport</em>' is always empty (offset 0 mask 0000000000000000)
+ * - By default, '<em>pipe</em>' maps to the UDP payload bits 12 .. 23 (offset 40
+ * mask 0000000fff000000)
+ * - By default, '<em>tc</em>' maps to the DSCP field in IP header (offset 48 mask
+ * 00000000000000fc)
+ *
+ * @cliexpar
+ * Example of how modify the '<em>pipe</em>' classification filter to match VLAN:
+ * @cliexcmd{set dpdk interface hqos pktfield GigabitEthernet0/8/0 id pipe offset 8 mask 0000000000000FFF}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_set_dpdk_if_hqos_pktfield, static) = {
+ .path = "set dpdk interface hqos pktfield",
+ .short_help = "set dpdk interface hqos pktfield <interface> id subport|pipe|tc offset <n> "
+ "mask <hex-mask>",
+ .function = set_dpdk_if_hqos_pktfield,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_dpdk_if_hqos (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vlib_thread_main_t *tm = vlib_get_thread_main ();
+ dpdk_main_t *dm = &dpdk_main;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ dpdk_device_config_hqos_t *cfg;
+ dpdk_device_hqos_per_hqos_thread_t *ht;
+ dpdk_device_hqos_per_worker_thread_t *wk;
+ u32 *tctbl;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 profile_id, subport_id, i;
+ struct rte_eth_dev_info dev_info;
+ dpdk_device_config_t *devconf = 0;
+ vlib_thread_registration_t *tr;
+ uword *p = 0;
+ clib_error_t *error = NULL;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify interface name!!");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ rte_eth_dev_info_get (xd->device_index, &dev_info);
+ if (dev_info.pci_dev)
+ { /* bonded interface has no pci info */
+ vlib_pci_addr_t pci_addr;
+
+ pci_addr.domain = dev_info.pci_dev->addr.domain;
+ pci_addr.bus = dev_info.pci_dev->addr.bus;
+ pci_addr.slot = dev_info.pci_dev->addr.devid;
+ pci_addr.function = dev_info.pci_dev->addr.function;
+
+ p =
+ hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
+ }
+
+ if (p)
+ devconf = pool_elt_at_index (dm->conf->dev_confs, p[0]);
+ else
+ devconf = &dm->conf->default_devconf;
+
+ if (devconf->hqos_enabled == 0)
+ {
+ vlib_cli_output (vm, "HQoS disabled for this interface");
+ goto done;
+ }
+
+ /* Detect the set of worker threads */
+ p = hash_get_mem (tm->thread_registrations_by_name, "workers");
+
+ /* Should never happen, shut up Coverity warning */
+ if (p == 0)
+ {
+ error = clib_error_return (0, "no worker registrations?");
+ goto done;
+ }
+
+ tr = (vlib_thread_registration_t *) p[0];
+
+ cfg = &devconf->hqos;
+ ht = xd->hqos_ht;
+ wk = &xd->hqos_wt[tr->first_index];
+ tctbl = wk->hqos_tc_table;
+
+ vlib_cli_output (vm, " Thread:");
+ vlib_cli_output (vm, " Input SWQ size = %u packets", cfg->swq_size);
+ vlib_cli_output (vm, " Enqueue burst size = %u packets",
+ ht->hqos_burst_enq);
+ vlib_cli_output (vm, " Dequeue burst size = %u packets",
+ ht->hqos_burst_deq);
+
+ vlib_cli_output (vm,
+ " Packet field 0: slab position = %4u, slab bitmask = 0x%016llx (subport)",
+ wk->hqos_field0_slabpos, wk->hqos_field0_slabmask);
+ vlib_cli_output (vm,
+ " Packet field 1: slab position = %4u, slab bitmask = 0x%016llx (pipe)",
+ wk->hqos_field1_slabpos, wk->hqos_field1_slabmask);
+ vlib_cli_output (vm,
+ " Packet field 2: slab position = %4u, slab bitmask = 0x%016llx (tc)",
+ wk->hqos_field2_slabpos, wk->hqos_field2_slabmask);
+ vlib_cli_output (vm,
+ " Packet field 2 tc translation table: ([Mapped Value Range]: tc/queue tc/queue ...)");
+ vlib_cli_output (vm,
+ " [ 0 .. 15]: "
+ "%u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u",
+ tctbl[0] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[0] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[1] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[1] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[2] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[2] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[3] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[3] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[4] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[4] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[5] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[5] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[6] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[6] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[7] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[7] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[8] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[8] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[9] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[9] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[10] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[10] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[11] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[11] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[12] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[12] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[13] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[13] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[14] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[14] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[15] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[15] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS);
+ vlib_cli_output (vm,
+ " [16 .. 31]: "
+ "%u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u",
+ tctbl[16] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[16] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[17] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[17] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[18] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[18] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[19] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[19] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[20] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[20] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[21] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[21] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[22] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[22] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[23] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[23] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[24] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[24] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[25] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[25] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[26] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[26] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[27] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[27] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[28] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[28] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[29] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[29] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[30] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[30] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[31] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[31] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS);
+ vlib_cli_output (vm,
+ " [32 .. 47]: "
+ "%u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u",
+ tctbl[32] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[32] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[33] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[33] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[34] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[34] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[35] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[35] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[36] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[36] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[37] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[37] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[38] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[38] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[39] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[39] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[40] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[40] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[41] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[41] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[42] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[42] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[43] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[43] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[44] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[44] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[45] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[45] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[46] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[46] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[47] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[47] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS);
+ vlib_cli_output (vm,
+ " [48 .. 63]: "
+ "%u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u %u/%u",
+ tctbl[48] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[48] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[49] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[49] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[50] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[50] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[51] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[51] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[52] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[52] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[53] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[53] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[54] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[54] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[55] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[55] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[56] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[56] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[57] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[57] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[58] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[58] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[59] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[59] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[60] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[60] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[61] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[61] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[62] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[62] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[63] / RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS,
+ tctbl[63] % RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS);
+ vlib_cli_output (vm, " Port:");
+ vlib_cli_output (vm, " Rate = %u bytes/second", cfg->port.rate);
+ vlib_cli_output (vm, " MTU = %u bytes", cfg->port.mtu);
+ vlib_cli_output (vm, " Frame overhead = %u bytes",
+ cfg->port.frame_overhead);
+ vlib_cli_output (vm, " Number of subports = %u",
+ cfg->port.n_subports_per_port);
+ vlib_cli_output (vm, " Number of pipes per subport = %u",
+ cfg->port.n_pipes_per_subport);
+ vlib_cli_output (vm,
+ " Packet queue size: TC0 = %u, TC1 = %u, TC2 = %u, TC3 = %u packets",
+ cfg->port.qsize[0], cfg->port.qsize[1], cfg->port.qsize[2],
+ cfg->port.qsize[3]);
+ vlib_cli_output (vm, " Number of pipe profiles = %u",
+ cfg->port.n_pipe_profiles);
+
+ for (subport_id = 0; subport_id < vec_len (cfg->subport); subport_id++)
+ {
+ vlib_cli_output (vm, " Subport %u:", subport_id);
+ vlib_cli_output (vm, " Rate = %u bytes/second",
+ cfg->subport[subport_id].tb_rate);
+ vlib_cli_output (vm, " Token bucket size = %u bytes",
+ cfg->subport[subport_id].tb_size);
+ vlib_cli_output (vm,
+ " Traffic class rate: TC0 = %u, TC1 = %u, TC2 = %u, TC3 = %u bytes/second",
+ cfg->subport[subport_id].tc_rate[0],
+ cfg->subport[subport_id].tc_rate[1],
+ cfg->subport[subport_id].tc_rate[2],
+ cfg->subport[subport_id].tc_rate[3]);
+ vlib_cli_output (vm, " TC period = %u milliseconds",
+ cfg->subport[subport_id].tc_period);
+ }
+
+ for (profile_id = 0; profile_id < vec_len (cfg->pipe); profile_id++)
+ {
+ vlib_cli_output (vm, " Pipe profile %u:", profile_id);
+ vlib_cli_output (vm, " Rate = %u bytes/second",
+ cfg->pipe[profile_id].tb_rate);
+ vlib_cli_output (vm, " Token bucket size = %u bytes",
+ cfg->pipe[profile_id].tb_size);
+ vlib_cli_output (vm,
+ " Traffic class rate: TC0 = %u, TC1 = %u, TC2 = %u, TC3 = %u bytes/second",
+ cfg->pipe[profile_id].tc_rate[0],
+ cfg->pipe[profile_id].tc_rate[1],
+ cfg->pipe[profile_id].tc_rate[2],
+ cfg->pipe[profile_id].tc_rate[3]);
+ vlib_cli_output (vm, " TC period = %u milliseconds",
+ cfg->pipe[profile_id].tc_period);
+#ifdef RTE_SCHED_SUBPORT_TC_OV
+ vlib_cli_output (vm, " TC3 oversubscription_weight = %u",
+ cfg->pipe[profile_id].tc_ov_weight);
+#endif
+
+ for (i = 0; i < RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE; i++)
+ {
+ vlib_cli_output (vm,
+ " TC%u WRR weights: Q0 = %u, Q1 = %u, Q2 = %u, Q3 = %u",
+ i, cfg->pipe[profile_id].wrr_weights[i * 4],
+ cfg->pipe[profile_id].wrr_weights[i * 4 + 1],
+ cfg->pipe[profile_id].wrr_weights[i * 4 + 2],
+ cfg->pipe[profile_id].wrr_weights[i * 4 + 3]);
+ }
+ }
+
+#ifdef RTE_SCHED_RED
+ vlib_cli_output (vm, " Weighted Random Early Detection (WRED):");
+ for (i = 0; i < RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE; i++)
+ {
+ vlib_cli_output (vm, " TC%u min: G = %u, Y = %u, R = %u", i,
+ cfg->port.red_params[i][e_RTE_METER_GREEN].min_th,
+ cfg->port.red_params[i][e_RTE_METER_YELLOW].min_th,
+ cfg->port.red_params[i][e_RTE_METER_RED].min_th);
+
+ vlib_cli_output (vm, " TC%u max: G = %u, Y = %u, R = %u", i,
+ cfg->port.red_params[i][e_RTE_METER_GREEN].max_th,
+ cfg->port.red_params[i][e_RTE_METER_YELLOW].max_th,
+ cfg->port.red_params[i][e_RTE_METER_RED].max_th);
+
+ vlib_cli_output (vm,
+ " TC%u inverted probability: G = %u, Y = %u, R = %u",
+ i, cfg->port.red_params[i][e_RTE_METER_GREEN].maxp_inv,
+ cfg->port.red_params[i][e_RTE_METER_YELLOW].maxp_inv,
+ cfg->port.red_params[i][e_RTE_METER_RED].maxp_inv);
+
+ vlib_cli_output (vm, " TC%u weight: R = %u, Y = %u, R = %u", i,
+ cfg->port.red_params[i][e_RTE_METER_GREEN].wq_log2,
+ cfg->port.red_params[i][e_RTE_METER_YELLOW].wq_log2,
+ cfg->port.red_params[i][e_RTE_METER_RED].wq_log2);
+ }
+#endif
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to display details of an output interface's HQoS
+ * settings.
+ *
+ * @cliexpar
+ * Example of how to display HQoS settings for an interfaces:
+ * @cliexstart{show dpdk interface hqos GigabitEthernet0/8/0}
+ * Thread:
+ * Input SWQ size = 4096 packets
+ * Enqueue burst size = 256 packets
+ * Dequeue burst size = 220 packets
+ * Packet field 0: slab position = 0, slab bitmask = 0x0000000000000000 (subport)
+ * Packet field 1: slab position = 40, slab bitmask = 0x0000000fff000000 (pipe)
+ * Packet field 2: slab position = 8, slab bitmask = 0x00000000000000fc (tc)
+ * Packet field 2 tc translation table: ([Mapped Value Range]: tc/queue tc/queue ...)
+ * [ 0 .. 15]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
+ * [16 .. 31]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
+ * [32 .. 47]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
+ * [48 .. 63]: 0/0 0/1 0/2 0/3 1/0 1/1 1/2 1/3 2/0 2/1 2/2 2/3 3/0 3/1 3/2 3/3
+ * Port:
+ * Rate = 1250000000 bytes/second
+ * MTU = 1514 bytes
+ * Frame overhead = 24 bytes
+ * Number of subports = 1
+ * Number of pipes per subport = 4096
+ * Packet queue size: TC0 = 64, TC1 = 64, TC2 = 64, TC3 = 64 packets
+ * Number of pipe profiles = 2
+ * Subport 0:
+ * Rate = 1250000000 bytes/second
+ * Token bucket size = 1000000 bytes
+ * Traffic class rate: TC0 = 1250000000, TC1 = 1250000000, TC2 = 1250000000, TC3 = 1250000000 bytes/second
+ * TC period = 10 milliseconds
+ * Pipe profile 0:
+ * Rate = 305175 bytes/second
+ * Token bucket size = 1000000 bytes
+ * Traffic class rate: TC0 = 305175, TC1 = 305175, TC2 = 305175, TC3 = 305175 bytes/second
+ * TC period = 40 milliseconds
+ * TC0 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
+ * TC1 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
+ * TC2 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
+ * TC3 WRR weights: Q0 = 1, Q1 = 1, Q2 = 1, Q3 = 1
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_show_dpdk_if_hqos, static) = {
+ .path = "show dpdk interface hqos",
+ .short_help = "show dpdk interface hqos <interface>",
+ .function = show_dpdk_if_hqos,
+};
+
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_dpdk_hqos_queue_stats (vlib_main_t * vm, unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ clib_error_t *error = NULL;
+#ifdef RTE_SCHED_COLLECT_STATS
+ dpdk_main_t *dm = &dpdk_main;
+ u32 hw_if_index = (u32) ~ 0;
+ u32 subport = (u32) ~ 0;
+ u32 pipe = (u32) ~ 0;
+ u32 tc = (u32) ~ 0;
+ u32 tc_q = (u32) ~ 0;
+ vnet_hw_interface_t *hw;
+ dpdk_device_t *xd;
+ uword *p = 0;
+ struct rte_eth_dev_info dev_info;
+ dpdk_device_config_t *devconf = 0;
+ u32 qindex;
+ struct rte_sched_queue_stats stats;
+ u16 qlen;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat
+ (line_input, "%U", unformat_vnet_hw_interface, dm->vnet_main,
+ &hw_if_index))
+ ;
+
+ else if (unformat (line_input, "subport %d", &subport))
+ ;
+
+ else if (unformat (line_input, "pipe %d", &pipe))
+ ;
+
+ else if (unformat (line_input, "tc %d", &tc))
+ ;
+
+ else if (unformat (line_input, "tc_q %d", &tc_q))
+ ;
+
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (hw_if_index == (u32) ~ 0)
+ {
+ error = clib_error_return (0, "please specify interface name!!");
+ goto done;
+ }
+
+ hw = vnet_get_hw_interface (dm->vnet_main, hw_if_index);
+ xd = vec_elt_at_index (dm->devices, hw->dev_instance);
+
+ rte_eth_dev_info_get (xd->device_index, &dev_info);
+ if (dev_info.pci_dev)
+ { /* bonded interface has no pci info */
+ vlib_pci_addr_t pci_addr;
+
+ pci_addr.domain = dev_info.pci_dev->addr.domain;
+ pci_addr.bus = dev_info.pci_dev->addr.bus;
+ pci_addr.slot = dev_info.pci_dev->addr.devid;
+ pci_addr.function = dev_info.pci_dev->addr.function;
+
+ p =
+ hash_get (dm->conf->device_config_index_by_pci_addr, pci_addr.as_u32);
+ }
+
+ if (p)
+ devconf = pool_elt_at_index (dm->conf->dev_confs, p[0]);
+ else
+ devconf = &dm->conf->default_devconf;
+
+ if (devconf->hqos_enabled == 0)
+ {
+ vlib_cli_output (vm, "HQoS disabled for this interface");
+ goto done;
+ }
+
+ /*
+ * Figure out which queue to query. cf rte_sched_port_qindex. (Not sure why
+ * that method isn't made public by DPDK - how _should_ we get the queue ID?)
+ */
+ qindex = subport * devconf->hqos.port.n_pipes_per_subport + pipe;
+ qindex = qindex * RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE + tc;
+ qindex = qindex * RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS + tc_q;
+
+ if (rte_sched_queue_read_stats (xd->hqos_ht->hqos, qindex, &stats, &qlen) !=
+ 0)
+ {
+ error = clib_error_return (0, "failed to read stats");
+ goto done;
+ }
+
+ vlib_cli_output (vm, "%=24s%=16s", "Stats Parameter", "Value");
+ vlib_cli_output (vm, "%=24s%=16d", "Packets", stats.n_pkts);
+ vlib_cli_output (vm, "%=24s%=16d", "Packets dropped", stats.n_pkts_dropped);
+#ifdef RTE_SCHED_RED
+ vlib_cli_output (vm, "%=24s%=16d", "Packets dropped (RED)",
+ stats.n_pkts_red_dropped);
+#endif
+ vlib_cli_output (vm, "%=24s%=16d", "Bytes", stats.n_bytes);
+ vlib_cli_output (vm, "%=24s%=16d", "Bytes dropped", stats.n_bytes_dropped);
+
+#else
+
+ /* Get a line of input */
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ vlib_cli_output (vm, "RTE_SCHED_COLLECT_STATS disabled in DPDK");
+ goto done;
+
+#endif
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * This command is used to display statistics associated with a HQoS traffic class
+ * queue.
+ *
+ * @note
+ * Statistic collection by the scheduler is disabled by default in DPDK. In order to
+ * turn it on, add the following line to '<em>../vpp/dpdk/Makefile</em>':
+ * - <b>$(call set,RTE_SCHED_COLLECT_STATS,y)</b>
+ *
+ * @cliexpar
+ * Example of how to display statistics of HQoS a HQoS traffic class queue:
+ * @cliexstart{show dpdk hqos queue GigabitEthernet0/9/0 subport 0 pipe 3181 tc 0 tc_q 0}
+ * Stats Parameter Value
+ * Packets 140
+ * Packets dropped 0
+ * Bytes 8400
+ * Bytes dropped 0
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (cmd_show_dpdk_hqos_queue_stats, static) = {
+ .path = "show dpdk hqos queue",
+ .short_help = "show dpdk hqos queue <interface> subport <subport_id> pipe <pipe_id> tc <tc_id> tc_q <queue_id>",
+ .function = show_dpdk_hqos_queue_stats,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+show_dpdk_version_command_fn (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+#define _(a,b,c) vlib_cli_output (vm, "%-25s " b, a ":", c);
+ _("DPDK Version", "%s", rte_version ());
+ _("DPDK EAL init args", "%s", dpdk_config_main.eal_init_args_str);
+#undef _
+ return 0;
+}
+
+/*?
+ * This command is used to display the current DPDK version and
+ * the list of arguments passed to DPDK when started.
+ *
+ * @cliexpar
+ * Example of how to display how many DPDK buffer test command has allcoated:
+ * @cliexstart{show dpdk version}
+ * DPDK Version: DPDK 16.11.0
+ * DPDK EAL init args: -c 1 -n 4 --huge-dir /run/vpp/hugepages --file-prefix vpp -w 0000:00:08.0 -w 0000:00:09.0 --master-lcore 0 --socket-mem 256
+ * @cliexend
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (show_vpe_version_command, static) = {
+ .path = "show dpdk version",
+ .short_help = "show dpdk version",
+ .function = show_dpdk_version_command_fn,
+};
+/* *INDENT-ON* */
+
+clib_error_t *
+dpdk_cli_init (vlib_main_t * vm)
+{
+ return 0;
+}
+
+VLIB_INIT_FUNCTION (dpdk_cli_init);
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */