summaryrefslogtreecommitdiffstats
path: root/src/plugins/dpdk/device/init.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/plugins/dpdk/device/init.c')
-rw-r--r--src/plugins/dpdk/device/init.c105
1 files changed, 7 insertions, 98 deletions
diff --git a/src/plugins/dpdk/device/init.c b/src/plugins/dpdk/device/init.c
index 1ee03323d61..fd1c9115954 100644
--- a/src/plugins/dpdk/device/init.c
+++ b/src/plugins/dpdk/device/init.c
@@ -97,8 +97,13 @@ dpdk_flag_change (vnet_main_t * vnm, vnet_hw_interface_t * hi, u32 flags)
xd->flags |= DPDK_DEVICE_FLAG_PROMISC;
break;
case ETHERNET_INTERFACE_FLAG_MTU:
- xd->port_conf.rxmode.max_rx_pkt_len = hi->max_packet_bytes;
- dpdk_device_setup (xd);
+ if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
+ rte_eth_dev_stop (xd->port_id);
+ rte_eth_dev_set_mtu (xd->port_id, hi->max_packet_bytes);
+ if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
+ rte_eth_dev_start (xd->port_id);
+ dpdk_log_debug ("[%u] mtu changed to %u", xd->port_id,
+ hi->max_packet_bytes);
return 0;
default:
return ~0;
@@ -115,12 +120,6 @@ dpdk_flag_change (vnet_main_t * vnm, vnet_hw_interface_t * hi, u32 flags)
return old;
}
-static int
-dpdk_port_crc_strip_enabled (dpdk_device_t * xd)
-{
- return !(xd->port_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC);
-}
-
/* The function check_l3cache helps check if Level 3 cache exists or not on current CPUs
return value 1: exist.
return value 0: not exist.
@@ -176,7 +175,6 @@ dpdk_lib_init (dpdk_main_t * dm)
{
vnet_main_t *vnm = vnet_get_main ();
u32 nports;
- u32 mtu, max_rx_frame;
u16 port_id;
clib_error_t *error;
vlib_main_t *vm = vlib_get_main ();
@@ -652,80 +650,6 @@ dpdk_lib_init (dpdk_main_t * dm)
if (error)
return error;
- /*
- * Ensure default mtu is not > the mtu read from the hardware.
- * Otherwise rte_eth_dev_configure() will fail and the port will
- * not be available.
- * Calculate max_frame_size and mtu supported by NIC
- */
- if (ETHERNET_MAX_PACKET_BYTES > di.max_rx_pktlen)
- {
- /*
- * This device does not support the platforms's max frame
- * size. Use it's advertised mru instead.
- */
- max_rx_frame = di.max_rx_pktlen;
- mtu = di.max_rx_pktlen - sizeof (ethernet_header_t);
- }
- else
- {
- /* VPP treats MTU and max_rx_pktlen both equal to
- * ETHERNET_MAX_PACKET_BYTES, if dev_info.max_rx_pktlen >=
- * ETHERNET_MAX_PACKET_BYTES + sizeof(ethernet_header_t)
- */
- if (di.max_rx_pktlen >=
- (ETHERNET_MAX_PACKET_BYTES + sizeof (ethernet_header_t)))
- {
- mtu = ETHERNET_MAX_PACKET_BYTES;
- max_rx_frame = ETHERNET_MAX_PACKET_BYTES;
-
- /*
- * Some platforms do not account for Ethernet FCS (4 bytes) in
- * MTU calculations. To interop with them increase mru but only
- * if the device's settings can support it.
- */
- if (dpdk_port_crc_strip_enabled (xd) &&
- (di.max_rx_pktlen >= (ETHERNET_MAX_PACKET_BYTES +
- sizeof (ethernet_header_t) + 4)))
- {
- max_rx_frame += 4;
- }
- }
- else
- {
- max_rx_frame = ETHERNET_MAX_PACKET_BYTES;
- mtu = ETHERNET_MAX_PACKET_BYTES - sizeof (ethernet_header_t);
-
- if (dpdk_port_crc_strip_enabled (xd) &&
- (di.max_rx_pktlen >= (ETHERNET_MAX_PACKET_BYTES + 4)))
- {
- max_rx_frame += 4;
- }
- }
- }
-
- if (xd->pmd == VNET_DPDK_PMD_FAILSAFE)
- {
- /* failsafe device numerables are reported with active device only,
- * need to query the mtu for current device setup to overwrite
- * reported value.
- */
- uint16_t dev_mtu;
- if (!rte_eth_dev_get_mtu (port_id, &dev_mtu))
- {
- mtu = dev_mtu;
- max_rx_frame = mtu + sizeof (ethernet_header_t);
-
- if (dpdk_port_crc_strip_enabled (xd))
- {
- max_rx_frame += 4;
- }
- }
- }
-
- /*Set port rxmode config */
- xd->port_conf.rxmode.max_rx_pkt_len = max_rx_frame;
-
sw = vnet_get_hw_sw_interface (vnm, xd->hw_if_index);
xd->sw_if_index = sw->sw_if_index;
vnet_hw_if_set_input_node (vnm, xd->hw_if_index, dpdk_input_node.index);
@@ -754,12 +678,8 @@ dpdk_lib_init (dpdk_main_t * dm)
/*Get vnet hardware interface */
hi = vnet_get_hw_interface (vnm, xd->hw_if_index);
- /*Override default max_packet_bytes and max_supported_bytes set in
- * ethernet_register_interface() above*/
if (hi)
{
- hi->max_packet_bytes = mtu;
- hi->max_supported_packet_bytes = max_rx_frame;
hi->numa_node = xd->cpu_socket;
/* Indicate ability to support L3 DMAC filtering and
@@ -819,17 +739,6 @@ dpdk_lib_init (dpdk_main_t * dm)
dpdk_log_err ("setup failed for device %U. Errors:\n %U",
format_dpdk_device_name, port_id,
format_dpdk_device_errors, xd);
-
- if (hi)
- hi->max_packet_bytes =
- xd->port_conf.rxmode.max_rx_pkt_len - sizeof (ethernet_header_t);
- else
- dpdk_log_warn ("hi NULL");
-
- if (xd->conf.no_multi_seg)
- mtu = mtu > ETHER_MAX_LEN ? ETHER_MAX_LEN : mtu;
-
- rte_eth_dev_set_mtu (xd->port_id, mtu);
}
return 0;