diff options
Diffstat (limited to 'src/plugins/nat/nat64_cli.c')
-rw-r--r-- | src/plugins/nat/nat64_cli.c | 983 |
1 files changed, 983 insertions, 0 deletions
diff --git a/src/plugins/nat/nat64_cli.c b/src/plugins/nat/nat64_cli.c new file mode 100644 index 00000000000..bb62ecf2967 --- /dev/null +++ b/src/plugins/nat/nat64_cli.c @@ -0,0 +1,983 @@ +/* + * Copyright (c) 2017 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +/** + * @file + * @brief NAT64 CLI + */ + +#include <nat/nat64.h> +#include <nat/nat.h> +#include <vnet/fib/fib_table.h> + +static clib_error_t * +nat64_add_del_pool_addr_command_fn (vlib_main_t * vm, + unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + ip4_address_t start_addr, end_addr, this_addr; + u32 start_host_order, end_host_order; + int i, count, rv; + u32 vrf_id = ~0; + u8 is_add = 1; + clib_error_t *error = 0; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + /* Get a line of input. */ + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "%U - %U", + unformat_ip4_address, &start_addr, + unformat_ip4_address, &end_addr)) + ; + else if (unformat (line_input, "tenant-vrf %u", &vrf_id)) + ; + else if (unformat (line_input, "%U", unformat_ip4_address, &start_addr)) + end_addr = start_addr; + else if (unformat (line_input, "del")) + is_add = 0; + else + { + error = clib_error_return (0, "unknown input '%U'", + format_unformat_error, line_input); + goto done; + } + } + + start_host_order = clib_host_to_net_u32 (start_addr.as_u32); + end_host_order = clib_host_to_net_u32 (end_addr.as_u32); + + if (end_host_order < start_host_order) + { + error = clib_error_return (0, "end address less than start address"); + goto done; + } + + count = (end_host_order - start_host_order) + 1; + this_addr = start_addr; + + for (i = 0; i < count; i++) + { + rv = nat64_add_del_pool_addr (&this_addr, vrf_id, is_add); + + switch (rv) + { + case VNET_API_ERROR_NO_SUCH_ENTRY: + error = + clib_error_return (0, "NAT64 pool address %U not exist.", + format_ip4_address, &this_addr); + goto done; + case VNET_API_ERROR_VALUE_EXIST: + error = + clib_error_return (0, "NAT64 pool address %U exist.", + format_ip4_address, &this_addr); + goto done; + default: + break; + + } + increment_v4_address (&this_addr); + } + +done: + unformat_free (line_input); + + return error; +} + +static int +nat64_cli_pool_walk (snat_address_t * ap, void *ctx) +{ + vlib_main_t *vm = ctx; + + if (ap->fib_index != ~0) + { + fib_table_t *fib; + fib = fib_table_get (ap->fib_index, FIB_PROTOCOL_IP6); + if (!fib) + return -1; + vlib_cli_output (vm, " %U tenant VRF: %u", format_ip4_address, + &ap->addr, fib->ft_table_id); + } + else + vlib_cli_output (vm, " %U", format_ip4_address, &ap->addr); + + return 0; +} + +static clib_error_t * +nat64_show_pool_command_fn (vlib_main_t * vm, + unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + vlib_cli_output (vm, "NAT64 pool:"); + nat64_pool_addr_walk (nat64_cli_pool_walk, vm); + + return 0; +} + +static clib_error_t * +nat64_interface_feature_command_fn (vlib_main_t * vm, + unformat_input_t * + input, vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + vnet_main_t *vnm = vnet_get_main (); + clib_error_t *error = 0; + u32 sw_if_index; + u32 *inside_sw_if_indices = 0; + u32 *outside_sw_if_indices = 0; + u8 is_add = 1; + int i, rv; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + /* Get a line of input. */ + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "in %U", unformat_vnet_sw_interface, + vnm, &sw_if_index)) + vec_add1 (inside_sw_if_indices, sw_if_index); + else if (unformat (line_input, "out %U", unformat_vnet_sw_interface, + vnm, &sw_if_index)) + vec_add1 (outside_sw_if_indices, sw_if_index); + else if (unformat (line_input, "del")) + is_add = 0; + else + { + error = clib_error_return (0, "unknown input '%U'", + format_unformat_error, line_input); + goto done; + } + } + + if (vec_len (inside_sw_if_indices)) + { + for (i = 0; i < vec_len (inside_sw_if_indices); i++) + { + sw_if_index = inside_sw_if_indices[i]; + rv = nat64_add_del_interface (sw_if_index, 1, is_add); + switch (rv) + { + case VNET_API_ERROR_NO_SUCH_ENTRY: + error = + clib_error_return (0, "%U NAT64 feature not enabled.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + case VNET_API_ERROR_VALUE_EXIST: + error = + clib_error_return (0, "%U NAT64 feature already enabled.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + case VNET_API_ERROR_INVALID_VALUE: + case VNET_API_ERROR_INVALID_VALUE_2: + error = + clib_error_return (0, + "%U NAT64 feature enable/disable failed.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + default: + break; + + } + } + } + + if (vec_len (outside_sw_if_indices)) + { + for (i = 0; i < vec_len (outside_sw_if_indices); i++) + { + sw_if_index = outside_sw_if_indices[i]; + rv = nat64_add_del_interface (sw_if_index, 0, is_add); + switch (rv) + { + case VNET_API_ERROR_NO_SUCH_ENTRY: + error = + clib_error_return (0, "%U NAT64 feature not enabled.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + case VNET_API_ERROR_VALUE_EXIST: + error = + clib_error_return (0, "%U NAT64 feature already enabled.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + case VNET_API_ERROR_INVALID_VALUE: + case VNET_API_ERROR_INVALID_VALUE_2: + error = + clib_error_return (0, + "%U NAT64 feature enable/disable failed.", + format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, sw_if_index)); + goto done; + default: + break; + + } + } + } + +done: + unformat_free (line_input); + vec_free (inside_sw_if_indices); + vec_free (outside_sw_if_indices); + + return error; +} + +static int +nat64_cli_interface_walk (snat_interface_t * i, void *ctx) +{ + vlib_main_t *vm = ctx; + vnet_main_t *vnm = vnet_get_main (); + + vlib_cli_output (vm, " %U %s", format_vnet_sw_interface_name, vnm, + vnet_get_sw_interface (vnm, i->sw_if_index), + i->is_inside ? "in" : "out"); + return 0; +} + +static clib_error_t * +nat64_show_interfaces_command_fn (vlib_main_t * vm, + unformat_input_t * + input, vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + vlib_cli_output (vm, "NAT64 interfaces:"); + nat64_interfaces_walk (nat64_cli_interface_walk, vm); + + return 0; +} + +static clib_error_t * +nat64_add_del_static_bib_command_fn (vlib_main_t * + vm, + unformat_input_t + * input, vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + clib_error_t *error = 0; + u8 is_add = 1; + ip6_address_t in_addr; + ip4_address_t out_addr; + u16 in_port = 0; + u16 out_port = 0; + u32 vrf_id = 0, protocol; + snat_protocol_t proto = 0; + u8 p = 0; + int rv; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "%U %u", unformat_ip6_address, + &in_addr, &in_port)) + ; + else if (unformat (line_input, "%U %u", unformat_ip4_address, + &out_addr, &out_port)) + ; + else if (unformat (line_input, "vrf %u", &vrf_id)) + ; + else if (unformat (line_input, "%U", unformat_snat_protocol, &proto)) + ; + else + if (unformat + (line_input, "%U %U %u", unformat_ip6_address, &in_addr, + unformat_ip4_address, &out_addr, &protocol)) + p = (u8) protocol; + else if (unformat (line_input, "del")) + is_add = 0; + else + { + error = clib_error_return (0, "unknown input: '%U'", + format_unformat_error, line_input); + goto done; + } + } + + if (!p) + { + if (!in_port) + { + error = + clib_error_return (0, "inside port and address must be set"); + goto done; + } + + if (!out_port) + { + error = + clib_error_return (0, "outside port and address must be set"); + goto done; + } + + p = snat_proto_to_ip_proto (proto); + } + + rv = + nat64_add_del_static_bib_entry (&in_addr, &out_addr, in_port, out_port, p, + vrf_id, is_add); + + switch (rv) + { + case VNET_API_ERROR_NO_SUCH_ENTRY: + error = clib_error_return (0, "NAT64 BIB entry not exist."); + goto done; + case VNET_API_ERROR_VALUE_EXIST: + error = clib_error_return (0, "NAT64 BIB entry exist."); + goto done; + case VNET_API_ERROR_UNSPECIFIED: + error = clib_error_return (0, "Crerate NAT64 BIB entry failed."); + goto done; + case VNET_API_ERROR_INVALID_VALUE: + error = + clib_error_return (0, "Outside addres %U and port %u already in use.", + format_ip4_address, &out_addr, out_port); + goto done; + default: + break; + } + +done: + unformat_free (line_input); + + return error; +} + +static int +nat64_cli_bib_walk (nat64_db_bib_entry_t * bibe, void *ctx) +{ + vlib_main_t *vm = ctx; + fib_table_t *fib; + + fib = fib_table_get (bibe->fib_index, FIB_PROTOCOL_IP6); + if (!fib) + return -1; + + switch (bibe->proto) + { + case IP_PROTOCOL_ICMP: + case IP_PROTOCOL_TCP: + case IP_PROTOCOL_UDP: + vlib_cli_output (vm, " %U %u %U %u protocol %U vrf %u %s %u sessions", + format_ip6_address, &bibe->in_addr, + clib_net_to_host_u16 (bibe->in_port), + format_ip4_address, &bibe->out_addr, + clib_net_to_host_u16 (bibe->out_port), + format_snat_protocol, + ip_proto_to_snat_proto (bibe->proto), fib->ft_table_id, + bibe->is_static ? "static" : "dynamic", bibe->ses_num); + break; + default: + vlib_cli_output (vm, " %U %U protocol %u vrf %u %s %u sessions", + format_ip6_address, &bibe->in_addr, + format_ip4_address, &bibe->out_addr, + bibe->proto, fib->ft_table_id, + bibe->is_static ? "static" : "dynamic", bibe->ses_num); + } + return 0; +} + +static clib_error_t * +nat64_show_bib_command_fn (vlib_main_t * vm, + unformat_input_t * input, vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + clib_error_t *error = 0; + u32 proto = ~0; + u8 p = 255; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + if (unformat (line_input, "%U", unformat_snat_protocol, &proto)) + p = snat_proto_to_ip_proto (proto); + else if (unformat (line_input, "unknown")) + p = 0; + else if (unformat (line_input, "all")) + ; + else + { + error = clib_error_return (0, "unknown input: '%U'", + format_unformat_error, line_input); + goto done; + } + + if (p == 255) + vlib_cli_output (vm, "NAT64 BIB entries:"); + else + vlib_cli_output (vm, "NAT64 %U BIB entries:", format_snat_protocol, + proto); + nat64_db_bib_walk (&nm->db, p, nat64_cli_bib_walk, vm); + +done: + unformat_free (line_input); + + return error; +} + +static clib_error_t * +nat64_set_timeouts_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + clib_error_t *error = 0; + u32 timeout, tcp_trans, tcp_est, tcp_incoming_syn; + + tcp_trans = nat64_get_tcp_trans_timeout (); + tcp_est = nat64_get_tcp_est_timeout (); + tcp_incoming_syn = nat64_get_tcp_incoming_syn_timeout (); + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat (line_input, "udp %u", &timeout)) + { + if (nat64_set_udp_timeout (timeout)) + { + error = clib_error_return (0, "Invalid UDP timeout value"); + goto done; + } + } + else if (unformat (line_input, "icmp %u", &timeout)) + { + if (nat64_set_icmp_timeout (timeout)) + { + error = clib_error_return (0, "Invalid ICMP timeout value"); + goto done; + } + } + else if (unformat (line_input, "tcp-trans %u", &tcp_trans)) + { + if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn)) + { + error = + clib_error_return (0, "Invalid TCP transitory tiemout value"); + goto done; + } + } + else if (unformat (line_input, "tcp-est %u", &tcp_est)) + { + if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn)) + { + error = + clib_error_return (0, + "Invalid TCP established tiemout value"); + goto done; + } + } + else + if (unformat (line_input, "tcp-incoming-syn %u", &tcp_incoming_syn)) + { + if (nat64_set_tcp_timeouts (tcp_trans, tcp_est, tcp_incoming_syn)) + { + error = + clib_error_return (0, + "Invalid TCP incoming SYN tiemout value"); + goto done; + } + } + else if (unformat (line_input, "reset")) + { + nat64_set_udp_timeout (0); + nat64_set_icmp_timeout (0); + nat64_set_tcp_timeouts (0, 0, 0); + } + else + { + error = clib_error_return (0, "unknown input '%U'", + format_unformat_error, line_input); + goto done; + } + } + +done: + unformat_free (line_input); + + return error; +} + +static clib_error_t * +nat64_show_timeouts_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + vlib_cli_output (vm, "NAT64 session timeouts:"); + vlib_cli_output (vm, " UDP %usec", nat64_get_udp_timeout ()); + vlib_cli_output (vm, " ICMP %usec", nat64_get_icmp_timeout ()); + vlib_cli_output (vm, " TCP transitory %usec", + nat64_get_tcp_trans_timeout ()); + vlib_cli_output (vm, " TCP established %usec", + nat64_get_tcp_est_timeout ()); + vlib_cli_output (vm, " TCP incoming SYN %usec", + nat64_get_tcp_incoming_syn_timeout ()); + + return 0; +} + +static int +nat64_cli_st_walk (nat64_db_st_entry_t * ste, void *ctx) +{ + vlib_main_t *vm = ctx; + nat64_main_t *nm = &nat64_main; + nat64_db_bib_entry_t *bibe; + fib_table_t *fib; + + bibe = nat64_db_bib_entry_by_index (&nm->db, ste->proto, ste->bibe_index); + if (!bibe) + return -1; + + fib = fib_table_get (bibe->fib_index, FIB_PROTOCOL_IP6); + if (!fib) + return -1; + + u32 vrf_id = fib->ft_table_id; + + if (ste->proto == IP_PROTOCOL_ICMP) + vlib_cli_output (vm, " %U %U %u %U %U %u protocol %U vrf %u", + format_ip6_address, &bibe->in_addr, + format_ip6_address, &ste->in_r_addr, + clib_net_to_host_u16 (bibe->in_port), + format_ip4_address, &bibe->out_addr, + format_ip4_address, &ste->out_r_addr, + clib_net_to_host_u16 (bibe->out_port), + format_snat_protocol, + ip_proto_to_snat_proto (bibe->proto), vrf_id); + else if (ste->proto == IP_PROTOCOL_TCP || ste->proto == IP_PROTOCOL_UDP) + vlib_cli_output (vm, " %U %u %U %u %U %u %U %u protcol %U vrf %u", + format_ip6_address, &bibe->in_addr, + clib_net_to_host_u16 (bibe->in_port), + format_ip6_address, &ste->in_r_addr, + clib_net_to_host_u16 (ste->r_port), + format_ip4_address, &bibe->out_addr, + clib_net_to_host_u16 (bibe->out_port), + format_ip4_address, &ste->out_r_addr, + clib_net_to_host_u16 (ste->r_port), + format_snat_protocol, + ip_proto_to_snat_proto (bibe->proto), vrf_id); + else + vlib_cli_output (vm, " %U %U %U %U protocol %u vrf %u", + format_ip6_address, &bibe->in_addr, + format_ip6_address, &ste->in_r_addr, + format_ip4_address, &bibe->out_addr, + format_ip4_address, &ste->out_r_addr, + bibe->proto, vrf_id); + + return 0; +} + +static clib_error_t * +nat64_show_st_command_fn (vlib_main_t * vm, + unformat_input_t * input, vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + unformat_input_t _line_input, *line_input = &_line_input; + clib_error_t *error = 0; + u32 proto = ~0; + u8 p = 255; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + if (unformat (line_input, "%U", unformat_snat_protocol, &proto)) + p = snat_proto_to_ip_proto (proto); + else if (unformat (line_input, "unknown")) + p = 0; + else if (unformat (line_input, "all")) + ; + else + { + error = clib_error_return (0, "unknown input: '%U'", + format_unformat_error, line_input); + goto done; + } + + if (p == 255) + vlib_cli_output (vm, "NAT64 sessions:"); + else + vlib_cli_output (vm, "NAT64 %U sessions:", format_snat_protocol, proto); + nat64_db_st_walk (&nm->db, p, nat64_cli_st_walk, vm); + +done: + unformat_free (line_input); + + return error; +} + +static clib_error_t * +nat64_add_del_prefix_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + clib_error_t *error = 0; + unformat_input_t _line_input, *line_input = &_line_input; + u8 is_add = 1; + u32 vrf_id = 0; + ip6_address_t prefix; + u32 plen = 0; + int rv; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + if (!unformat_user (input, unformat_line_input, line_input)) + return 0; + + while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) + { + if (unformat + (line_input, "%U/%u", unformat_ip6_address, &prefix, &plen)) + ; + else if (unformat (line_input, "tenant-vrf %u", &vrf_id)) + ; + else if (unformat (line_input, "del")) + is_add = 0; + else + { + error = clib_error_return (0, "unknown input: '%U'", + format_unformat_error, line_input); + goto done; + } + } + + if (!plen) + { + error = clib_error_return (0, "NAT64 prefix must be set."); + goto done; + } + + rv = nat64_add_del_prefix (&prefix, (u8) plen, vrf_id, is_add); + + switch (rv) + { + case VNET_API_ERROR_NO_SUCH_ENTRY: + error = clib_error_return (0, "NAT64 prefix not exist."); + goto done; + case VNET_API_ERROR_INVALID_VALUE: + error = clib_error_return (0, "Invalid prefix length."); + goto done; + default: + break; + } + +done: + unformat_free (line_input); + + return error; +} + +static int +nat64_cli_prefix_walk (nat64_prefix_t * p, void *ctx) +{ + vlib_main_t *vm = ctx; + + vlib_cli_output (vm, " %U/%u tenant-vrf %u", + format_ip6_address, &p->prefix, p->plen, p->vrf_id); + + return 0; +} + +static clib_error_t * +nat64_show_prefix_command_fn (vlib_main_t * vm, unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + nat64_main_t *nm = &nat64_main; + + if (nm->is_disabled) + return clib_error_return (0, + "NAT64 disabled, multi thread not supported"); + + vlib_cli_output (vm, "NAT64 prefix:"); + nat64_prefix_walk (nat64_cli_prefix_walk, vm); + + return 0; +} + +/* *INDENT-OFF* */ + +/*? + * @cliexpar + * @cliexstart{nat64 add pool address} + * Add/delete NAT64 pool address. + * To add single NAT64 pool address use: + * vpp# nat64 add pool address 10.1.1.10 + * To add NAT64 pool address range use: + * vpp# nat64 add pool address 10.1.1.2 - 10.1.1.5 + * To add NAT64 pool address for specific tenant use: + * vpp# nat64 add pool address 10.1.1.100 tenant-vrf 100 + * @cliexend +?*/ +VLIB_CLI_COMMAND (nat64_add_pool_address_command, static) = { + .path = "nat64 add pool address", + .short_help = "nat64 add pool address <ip4-range-start> [- <ip4-range-end>] " + "[tenant-vrf <vrf-id>] [del]", + .function = nat64_add_del_pool_addr_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 pool} + * Show NAT64 pool. + * vpp# show nat64 pool + * NAT64 pool: + * 10.1.1.3 tenant VRF: 0 + * 10.1.1.10 tenant VRF: 10 + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_pool_command, static) = { + .path = "show nat64 pool", + .short_help = "show nat64 pool", + .function = nat64_show_pool_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{set interface nat64} + * Enable/disable NAT64 feature on the interface. + * To enable NAT64 feature with local (IPv6) network interface + * GigabitEthernet0/8/0 and external (IPv4) network interface + * GigabitEthernet0/a/0 use: + * vpp# set interface nat64 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0 + * @cliexend +?*/ +VLIB_CLI_COMMAND (set_interface_nat64_command, static) = { + .path = "set interface nat64", + .short_help = "set interface nat64 in|out <intfc> [del]", + .function = nat64_interface_feature_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 interfaces} + * Show interfaces with NAT64 feature. + * To show interfaces with NAT64 feature use: + * vpp# show nat64 interfaces + * NAT64 interfaces: + * GigabitEthernet0/8/0 in + * GigabitEthernet0/a/0 out + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_interfaces_command, static) = { + .path = "show nat64 interfaces", + .short_help = "show nat64 interfaces", + .function = nat64_show_interfaces_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{nat64 add static bib} + * Add/delete NAT64 static BIB entry. + * To create NAT64 satatic BIB entry use: + * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp + * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 + * @cliexend +?*/ +VLIB_CLI_COMMAND (nat64_add_del_static_bib_command, static) = { + .path = "nat64 add static bib", + .short_help = "nat64 add static bib <ip6-addr> <port> <ip4-addr> <port> " + "tcp|udp|icmp [vfr <table-id>] [del]", + .function = nat64_add_del_static_bib_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 bib} + * Show NAT64 BIB entries. + * To show NAT64 TCP BIB entries use: + * vpp# show nat64 bib tcp + * NAT64 tcp BIB: + * fd01:1::2 6303 10.0.0.3 62303 tcp vrf 0 dynamic 1 sessions + * 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp vrf 0 static 2 sessions + * To show NAT64 UDP BIB entries use: + * vpp# show nat64 bib udp + * NAT64 udp BIB: + * fd01:1::2 6304 10.0.0.3 10546 udp vrf 0 dynamic 10 sessions + * 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 static 0 sessions + * To show NAT64 ICMP BIB entries use: + * vpp# show nat64 bib icmp + * NAT64 icmp BIB: + * fd01:1::2 6305 10.0.0.3 63209 icmp vrf 10 dynamic 1 sessions + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_bib_command, static) = { + .path = "show nat64 bib", + .short_help = "show nat64 bib all|tcp|udp|icmp|unknown", + .function = nat64_show_bib_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{set nat64 timeouts} + * Set NAT64 session timeouts (in seconds). + * To set NAT64 session timeoutes use use: + * vpp# set nat64 timeouts udp 200 icmp 30 tcp-trans 250 tcp-est 7450 + * To reset NAT64 session timeoutes to default values use: + * vpp# set nat64 timeouts reset + * @cliexend +?*/ +VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = { + .path = "set nat64 timeouts", + .short_help = "set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> " + "tcp-est <sec> tcp-incoming-syn <sec> | reset", + .function = nat64_set_timeouts_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 tiemouts} + * Show NAT64 session timeouts: + * vpp# show nat64 tiemouts + * NAT64 session timeouts: + * UDP 300sec + * ICMP 60sec + * TCP transitory 240sec + * TCP established 7440sec + * TCP incoming SYN 6sec + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_timeouts_command, static) = { + .path = "show nat64 tiemouts", + .short_help = "show nat64 tiemouts", + .function = nat64_show_timeouts_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 session table} + * Show NAT64 session table. + * To show NAT64 TCP session table use: + * vpp# show nat64 session table tcp + * NAT64 tcp session table: + * fd01:1::2 6303 64:ff9b::ac10:202 20 10.0.0.3 62303 172.16.2.2 20 tcp vrf 0 + * fd01:3::2 6303 64:ff9b::ac10:202 20 10.0.10.3 21300 172.16.2.2 20 tcp vrf 10 + * To show NAT64 UDP session table use: + * #vpp show nat64 session table udp + * NAT64 udp session table: + * fd01:1::2 6304 64:ff9b::ac10:202 20 10.0.0.3 10546 172.16.2.2 20 udp vrf 0 + * fd01:3::2 6304 64:ff9b::ac10:202 20 10.0.10.3 58627 172.16.2.2 20 udp vrf 10 + * fd01:1::2 1235 64:ff9b::a00:3 4023 10.0.0.3 24488 10.0.0.3 4023 udp vrf 0 + * fd01:1::3 23 64:ff9b::a00:3 24488 10.0.0.3 4023 10.0.0.3 24488 udp vrf 0 + * To show NAT64 ICMP session table use: + * #vpp show nat64 session table icmp + * NAT64 icmp session table: + * fd01:1::2 64:ff9b::ac10:202 6305 10.0.0.3 172.16.2.2 63209 icmp vrf 0 + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_st_command, static) = { + .path = "show nat64 session table", + .short_help = "show nat64 session table all|tcp|udp|icmp|unknown", + .function = nat64_show_st_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{nat64 add prefix} + * Set NAT64 prefix for generating IPv6 representations of IPv4 addresses. + * To set NAT64 global prefix use: + * vpp# nat64 add prefix 2001:db8::/32 + * To set NAT64 prefix for specific tenant use: + * vpp# nat64 add prefix 2001:db8:122:300::/56 tenant-vrf 10 + * @cliexend +?*/ +VLIB_CLI_COMMAND (nat64_add_del_prefix_command, static) = { + .path = "nat64 add prefix", + .short_help = "nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] " + "[del]", + .function = nat64_add_del_prefix_command_fn, +}; + +/*? + * @cliexpar + * @cliexstart{show nat64 prefix} + * Show NAT64 prefix. + * To show NAT64 prefix use: + * vpp# show nat64 prefix + * NAT64 prefix: + * 2001:db8::/32 tenant-vrf 0 + * 2001:db8:122:300::/56 tenant-vrf 10 + * @cliexend +?*/ +VLIB_CLI_COMMAND (show_nat64_prefix_command, static) = { + .path = "show nat64 prefix", + .short_help = "show nat64 prefix", + .function = nat64_show_prefix_command_fn, +}; + +/* *INDENT-ON* */ + +/* + * fd.io coding-style-patch-verification: ON + * + * Local Variables: + * eval: (c-set-style "gnu") + * End: + */ |