aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/vxlan-gpe/vxlan_gpe.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/plugins/vxlan-gpe/vxlan_gpe.c')
-rw-r--r--src/plugins/vxlan-gpe/vxlan_gpe.c1259
1 files changed, 1259 insertions, 0 deletions
diff --git a/src/plugins/vxlan-gpe/vxlan_gpe.c b/src/plugins/vxlan-gpe/vxlan_gpe.c
new file mode 100644
index 00000000000..abb2049a356
--- /dev/null
+++ b/src/plugins/vxlan-gpe/vxlan_gpe.c
@@ -0,0 +1,1259 @@
+/*
+ * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/**
+ * @file
+ * @brief Common utility functions for IPv4 and IPv6 VXLAN GPE tunnels
+ *
+*/
+#include <vxlan-gpe/vxlan_gpe.h>
+#include <vnet/fib/fib.h>
+#include <vnet/ip/format.h>
+#include <vnet/fib/fib_entry.h>
+#include <vnet/fib/fib_table.h>
+#include <vnet/fib/fib_entry_track.h>
+#include <vnet/mfib/mfib_table.h>
+#include <vnet/adj/adj_mcast.h>
+#include <vnet/interface.h>
+#include <vnet/udp/udp_local.h>
+#include <vlib/vlib.h>
+
+/**
+ * @file
+ * @brief VXLAN-GPE.
+ *
+ * VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs)
+ * to span multiple servers. This is done by building an L2 overlay on
+ * top of an L3 network underlay using VXLAN-GPE tunnels.
+ *
+ * This makes it possible for servers to be co-located in the same data
+ * center or be separated geographically as long as they are reachable
+ * through the underlay L3 network.
+ *
+ * You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment.
+ */
+
+vxlan_gpe_main_t vxlan_gpe_main __clib_export;
+
+static u8 *
+format_decap_next (u8 * s, va_list * args)
+{
+ vxlan_gpe_tunnel_t *t = va_arg (*args, vxlan_gpe_tunnel_t *);
+
+ switch (t->protocol)
+ {
+ case VXLAN_GPE_PROTOCOL_IP4:
+ s = format (s, "protocol ip4 fib-idx %d", t->decap_fib_index);
+ break;
+ case VXLAN_GPE_PROTOCOL_IP6:
+ s = format (s, "protocol ip6 fib-idx %d", t->decap_fib_index);
+ break;
+ case VXLAN_GPE_PROTOCOL_ETHERNET:
+ s = format (s, "protocol ethernet");
+ break;
+ case VXLAN_GPE_PROTOCOL_NSH:
+ s = format (s, "protocol nsh");
+ break;
+ default:
+ s = format (s, "protocol unknown %d", t->protocol);
+ }
+
+ return s;
+}
+
+/**
+ * @brief Format function for VXLAN GPE tunnel
+ *
+ * @param *s formatting string
+ * @param *args
+ *
+ * @return *s formatted string
+ *
+ */
+u8 *
+format_vxlan_gpe_tunnel (u8 * s, va_list * args)
+{
+ vxlan_gpe_tunnel_t *t = va_arg (*args, vxlan_gpe_tunnel_t *);
+ vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
+
+ s = format (s,
+ "[%d] lcl %U rmt %U lcl_port %d rmt_port %d vni %d "
+ "fib-idx %d sw-if-idx %d ",
+ t - ngm->tunnels, format_ip46_address, &t->local, IP46_TYPE_ANY,
+ format_ip46_address, &t->remote, IP46_TYPE_ANY, t->local_port,
+ t->remote_port, t->vni, t->encap_fib_index, t->sw_if_index);
+
+#if 0
+ /* next_dpo not yet used by vxlan-gpe-encap node */
+ s = format (s, "encap-dpo-idx %d ", t->next_dpo.dpoi_index);
+ */
+#endif
+ s = format (s, "decap-next-%U ", format_decap_next, t);
+
+ if (PREDICT_FALSE (ip46_address_is_multicast (&t->remote)))
+ s = format (s, "mcast-sw-if-idx %d ", t->mcast_sw_if_index);
+
+ return s;
+}
+
+/**
+ * @brief Naming for VXLAN GPE tunnel
+ *
+ * @param *s formatting string
+ * @param *args
+ *
+ * @return *s formatted string
+ *
+ */
+static u8 *
+format_vxlan_gpe_name (u8 * s, va_list * args)
+{
+ u32 dev_instance = va_arg (*args, u32);
+ return format (s, "vxlan_gpe_tunnel%d", dev_instance);
+}
+
+/**
+ * @brief CLI function for VXLAN GPE admin up/down
+ *
+ * @param *vnm
+ * @param hw_if_index
+ * @param flag
+ *
+ * @return *rc
+ *
+ */
+static clib_error_t *
+vxlan_gpe_interface_admin_up_down (vnet_main_t * vnm, u32 hw_if_index,
+ u32 flags)
+{
+ u32 hw_flags = (flags & VNET_SW_INTERFACE_FLAG_ADMIN_UP) ?
+ VNET_HW_INTERFACE_FLAG_LINK_UP : 0;
+ vnet_hw_interface_set_flags (vnm, hw_if_index, hw_flags);
+
+ return 0;
+}
+
+VNET_DEVICE_CLASS (vxlan_gpe_device_class,static) = {
+ .name = "VXLAN_GPE",
+ .format_device_name = format_vxlan_gpe_name,
+ .format_tx_trace = format_vxlan_gpe_encap_trace,
+ .admin_up_down_function = vxlan_gpe_interface_admin_up_down,
+};
+
+
+/**
+ * @brief Formatting function for tracing VXLAN GPE with length
+ *
+ * @param *s
+ * @param *args
+ *
+ * @return *s
+ *
+ */
+static u8 *
+format_vxlan_gpe_header_with_length (u8 * s, va_list * args)
+{
+ u32 dev_instance = va_arg (*args, u32);
+ s = format (s, "unimplemented dev %u", dev_instance);
+ return s;
+}
+
+VNET_HW_INTERFACE_CLASS (vxlan_gpe_hw_class) = {
+ .name = "VXLAN_GPE",
+ .format_header = format_vxlan_gpe_header_with_length,
+ .build_rewrite = default_build_rewrite,
+};
+
+static void
+vxlan_gpe_tunnel_restack_dpo (vxlan_gpe_tunnel_t * t)
+{
+ dpo_id_t dpo = DPO_INVALID;
+ u32 encap_index = vxlan_gpe_encap_node.index;
+ fib_forward_chain_type_t forw_type = ip46_address_is_ip4 (&t->remote) ?
+ FIB_FORW_CHAIN_TYPE_UNICAST_IP4 : FIB_FORW_CHAIN_TYPE_UNICAST_IP6;
+
+ fib_entry_contribute_forwarding (t->fib_entry_index, forw_type, &dpo);
+ dpo_stack_from_node (encap_index, &t->next_dpo, &dpo);
+ dpo_reset (&dpo);
+}
+
+static vxlan_gpe_tunnel_t *
+vxlan_gpe_tunnel_from_fib_node (fib_node_t * node)
+{
+ ASSERT (FIB_NODE_TYPE_VXLAN_GPE_TUNNEL == node->fn_type);
+ return ((vxlan_gpe_tunnel_t *) (((char *) node) -
+ STRUCT_OFFSET_OF (vxlan_gpe_tunnel_t,
+ node)));
+}
+
+/**
+ * Function definition to backwalk a FIB node -
+ * Here we will restack the new dpo of VXLAN_GPE DIP to encap node.
+ */
+static fib_node_back_walk_rc_t
+vxlan_gpe_tunnel_back_walk (fib_node_t * node, fib_node_back_walk_ctx_t * ctx)
+{
+ vxlan_gpe_tunnel_restack_dpo (vxlan_gpe_tunnel_from_fib_node (node));
+ return (FIB_NODE_BACK_WALK_CONTINUE);
+}
+
+/**
+ * Function definition to get a FIB node from its index
+ */
+static fib_node_t *
+vxlan_gpe_tunnel_fib_node_get (fib_node_index_t index)
+{
+ vxlan_gpe_tunnel_t *t;
+ vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
+
+ t = pool_elt_at_index (ngm->tunnels, index);
+
+ return (&t->node);
+}
+
+/**
+ * Function definition to inform the FIB node that its last lock has gone.
+ */
+static void
+vxlan_gpe_tunnel_last_lock_gone (fib_node_t * node)
+{
+ /*
+ * The VXLAN_GPE tunnel is a root of the graph. As such
+ * it never has children and thus is never locked.
+ */
+ ASSERT (0);
+}
+
+/*
+ * Virtual function table registered by VXLAN_GPE tunnels
+ * for participation in the FIB object graph.
+ */
+const static fib_node_vft_t vxlan_gpe_vft = {
+ .fnv_get = vxlan_gpe_tunnel_fib_node_get,
+ .fnv_last_lock = vxlan_gpe_tunnel_last_lock_gone,
+ .fnv_back_walk = vxlan_gpe_tunnel_back_walk,
+};
+
+#define foreach_gpe_copy_field \
+ _ (vni) \
+ _ (protocol) \
+ _ (mcast_sw_if_index) \
+ _ (encap_fib_index) \
+ _ (decap_fib_index) \
+ _ (local_port) \
+ _ (remote_port)
+
+#define foreach_copy_ipv4 { \
+ _(local.ip4.as_u32) \
+ _(remote.ip4.as_u32) \
+}
+
+#define foreach_copy_ipv6 { \
+ _(local.ip6.as_u64[0]) \
+ _(local.ip6.as_u64[1]) \
+ _(remote.ip6.as_u64[0]) \
+ _(remote.ip6.as_u64[1]) \
+}
+
+
+/**
+ * @brief Calculate IPv4 VXLAN GPE rewrite header
+ *
+ * @param *t
+ *
+ * @return rc
+ *
+ */
+int
+vxlan4_gpe_rewrite (vxlan_gpe_tunnel_t * t, u32 extension_size,
+ u8 protocol_override, uword encap_next_node)
+{
+ u8 *rw = 0;
+ ip4_header_t *ip0;
+ ip4_vxlan_gpe_header_t *h0;
+ int len;
+
+ len = sizeof (*h0) + extension_size;
+
+ vec_free (t->rewrite);
+ vec_validate_aligned (rw, len - 1, CLIB_CACHE_LINE_BYTES);
+
+ h0 = (ip4_vxlan_gpe_header_t *) rw;
+
+ /* Fixed portion of the (outer) ip4 header */
+ ip0 = &h0->ip4;
+ ip0->ip_version_and_header_length = 0x45;
+ ip0->ttl = 254;
+ ip0->protocol = IP_PROTOCOL_UDP;
+
+ /* we fix up the ip4 header length and checksum after-the-fact */
+ ip0->src_address.as_u32 = t->local.ip4.as_u32;
+ ip0->dst_address.as_u32 = t->remote.ip4.as_u32;
+ ip0->checksum = ip4_header_checksum (ip0);
+
+ /* UDP header, randomize src port on something, maybe? */
+ h0->udp.src_port = clib_host_to_net_u16 (t->local_port);
+ h0->udp.dst_port = clib_host_to_net_u16 (t->remote_port);
+
+ /* VXLAN header. Are we having fun yet? */
+ h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P;
+ h0->vxlan.ver_res = VXLAN_GPE_VERSION;
+ if (protocol_override)
+ {
+ h0->vxlan.protocol = protocol_override;
+ }
+ else
+ {
+ h0->vxlan.protocol = t->protocol;
+ }
+ t->rewrite_size = sizeof (ip4_vxlan_gpe_header_t) + extension_size;
+ h0->vxlan.vni_res = clib_host_to_net_u32 (t->vni << 8);
+
+ t->rewrite = rw;
+ t->encap_next_node = encap_next_node;
+ return (0);
+}
+
+/**
+ * @brief Calculate IPv6 VXLAN GPE rewrite header
+ *
+ * @param *t
+ *
+ * @return rc
+ *
+ */
+int
+vxlan6_gpe_rewrite (vxlan_gpe_tunnel_t * t, u32 extension_size,
+ u8 protocol_override, uword encap_next_node)
+{
+ u8 *rw = 0;
+ ip6_header_t *ip0;
+ ip6_vxlan_gpe_header_t *h0;
+ int len;
+
+ len = sizeof (*h0) + extension_size;
+
+ vec_free (t->rewrite);
+ vec_validate_aligned (rw, len - 1, CLIB_CACHE_LINE_BYTES);
+
+ h0 = (ip6_vxlan_gpe_header_t *) rw;
+
+ /* Fixed portion of the (outer) ip4 header */
+ ip0 = &h0->ip6;
+ ip0->ip_version_traffic_class_and_flow_label =
+ clib_host_to_net_u32 (6 << 28);
+ ip0->hop_limit = 255;
+ ip0->protocol = IP_PROTOCOL_UDP;
+
+ ip0->src_address.as_u64[0] = t->local.ip6.as_u64[0];
+ ip0->src_address.as_u64[1] = t->local.ip6.as_u64[1];
+ ip0->dst_address.as_u64[0] = t->remote.ip6.as_u64[0];
+ ip0->dst_address.as_u64[1] = t->remote.ip6.as_u64[1];
+
+ /* UDP header, randomize src port on something, maybe? */
+ h0->udp.src_port = clib_host_to_net_u16 (t->local_port);
+ h0->udp.dst_port = clib_host_to_net_u16 (t->remote_port);
+
+ /* VXLAN header. Are we having fun yet? */
+ h0->vxlan.flags = VXLAN_GPE_FLAGS_I | VXLAN_GPE_FLAGS_P;
+ h0->vxlan.ver_res = VXLAN_GPE_VERSION;
+ if (protocol_override)
+ {
+ h0->vxlan.protocol = t->protocol;
+ }
+ else
+ {
+ h0->vxlan.protocol = protocol_override;
+ }
+ t->rewrite_size = sizeof (ip4_vxlan_gpe_header_t) + extension_size;
+ h0->vxlan.vni_res = clib_host_to_net_u32 (t->vni << 8);
+
+ t->rewrite = rw;
+ t->encap_next_node = encap_next_node;
+ return (0);
+}
+
+typedef CLIB_PACKED(union {
+ struct {
+ fib_node_index_t mfib_entry_index;
+ adj_index_t mcast_adj_index;
+ };
+ u64 as_u64;
+}) mcast_shared_t;
+
+static inline mcast_shared_t
+mcast_shared_get (ip46_address_t * ip)
+{
+ ASSERT (ip46_address_is_multicast (ip));
+ uword *p = hash_get_mem (vxlan_gpe_main.mcast_shared, ip);
+ ALWAYS_ASSERT (p);
+ return (mcast_shared_t)
+ {
+ .as_u64 = *p};
+}
+
+static inline void
+mcast_shared_add (ip46_address_t * remote,
+ fib_node_index_t mfei, adj_index_t ai)
+{
+ mcast_shared_t new_ep = {
+ .mcast_adj_index = ai,
+ .mfib_entry_index = mfei,
+ };
+
+ hash_set_mem_alloc (&vxlan_gpe_main.mcast_shared, remote, new_ep.as_u64);
+}
+
+static inline void
+mcast_shared_remove (ip46_address_t * remote)
+{
+ mcast_shared_t ep = mcast_shared_get (remote);
+
+ adj_unlock (ep.mcast_adj_index);
+ mfib_table_entry_delete_index (ep.mfib_entry_index, MFIB_SOURCE_VXLAN_GPE);
+
+ hash_unset_mem_free (&vxlan_gpe_main.mcast_shared, remote);
+}
+
+/**
+ * @brief Add or Del a VXLAN GPE tunnel
+ *
+ * @param *a
+ * @param *sw_if_index
+ *
+ * @return rc
+ *
+ */
+int vnet_vxlan_gpe_add_del_tunnel
+ (vnet_vxlan_gpe_add_del_tunnel_args_t * a, u32 * sw_if_indexp)
+{
+ vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
+ vxlan_gpe_tunnel_t *t = 0;
+ vnet_main_t *vnm = ngm->vnet_main;
+ vnet_hw_interface_t *hi;
+ uword *p;
+ u32 hw_if_index = ~0;
+ u32 sw_if_index = ~0;
+ int rv;
+ vxlan4_gpe_tunnel_key_t key4, *key4_copy;
+ vxlan6_gpe_tunnel_key_t key6, *key6_copy;
+ u32 is_ip6 = a->is_ip6;
+
+ /* Set udp-ports */
+ if (a->local_port == 0)
+ a->local_port = is_ip6 ? UDP_DST_PORT_VXLAN6_GPE : UDP_DST_PORT_VXLAN_GPE;
+
+ if (a->remote_port == 0)
+ a->remote_port = is_ip6 ? UDP_DST_PORT_VXLAN6_GPE : UDP_DST_PORT_VXLAN_GPE;
+
+ if (!is_ip6)
+ {
+ key4.local = a->local.ip4.as_u32;
+ key4.remote = a->remote.ip4.as_u32;
+ key4.vni = clib_host_to_net_u32 (a->vni << 8);
+ key4.port = (u32) clib_host_to_net_u16 (a->local_port);
+
+ p = hash_get_mem (ngm->vxlan4_gpe_tunnel_by_key, &key4);
+ }
+ else
+ {
+ key6.local.as_u64[0] = a->local.ip6.as_u64[0];
+ key6.local.as_u64[1] = a->local.ip6.as_u64[1];
+ key6.remote.as_u64[0] = a->remote.ip6.as_u64[0];
+ key6.remote.as_u64[1] = a->remote.ip6.as_u64[1];
+ key6.vni = clib_host_to_net_u32 (a->vni << 8);
+ key6.port = (u32) clib_host_to_net_u16 (a->local_port);
+
+ p = hash_get_mem (ngm->vxlan6_gpe_tunnel_by_key, &key6);
+ }
+
+ if (a->is_add)
+ {
+ l2input_main_t *l2im = &l2input_main;
+
+ /* adding a tunnel: tunnel must not already exist */
+ if (p)
+ return VNET_API_ERROR_TUNNEL_EXIST;
+
+ pool_get_aligned (ngm->tunnels, t, CLIB_CACHE_LINE_BYTES);
+ clib_memset (t, 0, sizeof (*t));
+
+ /* copy from arg structure */
+#define _(x) t->x = a->x;
+ foreach_gpe_copy_field;
+ if (!a->is_ip6)
+ foreach_copy_ipv4
+ else
+ foreach_copy_ipv6
+#undef _
+
+ if (!a->is_ip6)
+ t->flags |= VXLAN_GPE_TUNNEL_IS_IPV4;
+
+ if (!a->is_ip6)
+ {
+ rv = vxlan4_gpe_rewrite (t, 0, 0, VXLAN_GPE_ENCAP_NEXT_IP4_LOOKUP);
+ }
+ else
+ {
+ rv = vxlan6_gpe_rewrite (t, 0, 0, VXLAN_GPE_ENCAP_NEXT_IP6_LOOKUP);
+ }
+
+ if (rv)
+ {
+ pool_put (ngm->tunnels, t);
+ return rv;
+ }
+
+ if (!is_ip6)
+ {
+ key4_copy = clib_mem_alloc (sizeof (*key4_copy));
+ clib_memcpy_fast (key4_copy, &key4, sizeof (*key4_copy));
+ hash_set_mem (ngm->vxlan4_gpe_tunnel_by_key, key4_copy,
+ t - ngm->tunnels);
+ }
+ else
+ {
+ key6_copy = clib_mem_alloc (sizeof (*key6_copy));
+ clib_memcpy_fast (key6_copy, &key6, sizeof (*key6_copy));
+ hash_set_mem (ngm->vxlan6_gpe_tunnel_by_key, key6_copy,
+ t - ngm->tunnels);
+ }
+
+ if (vec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices) > 0)
+ {
+ vnet_interface_main_t *im = &vnm->interface_main;
+ hw_if_index = ngm->free_vxlan_gpe_tunnel_hw_if_indices
+ [vec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices) - 1];
+ vec_dec_len (ngm->free_vxlan_gpe_tunnel_hw_if_indices, 1);
+
+ hi = vnet_get_hw_interface (vnm, hw_if_index);
+ hi->dev_instance = t - ngm->tunnels;
+ hi->hw_instance = hi->dev_instance;
+ /* clear old stats of freed tunnel before reuse */
+ sw_if_index = hi->sw_if_index;
+ vnet_interface_counter_lock (im);
+ vlib_zero_combined_counter
+ (&im->combined_sw_if_counters[VNET_INTERFACE_COUNTER_TX],
+ sw_if_index);
+ vlib_zero_combined_counter (&im->combined_sw_if_counters
+ [VNET_INTERFACE_COUNTER_RX],
+ sw_if_index);
+ vlib_zero_simple_counter (&im->sw_if_counters
+ [VNET_INTERFACE_COUNTER_DROP],
+ sw_if_index);
+ vnet_interface_counter_unlock (im);
+ }
+ else
+ {
+ hw_if_index = vnet_register_interface
+ (vnm, vxlan_gpe_device_class.index, t - ngm->tunnels,
+ vxlan_gpe_hw_class.index, t - ngm->tunnels);
+ hi = vnet_get_hw_interface (vnm, hw_if_index);
+ }
+
+ /* Set vxlan-gpe tunnel output node */
+ u32 encap_index = vxlan_gpe_encap_node.index;
+ vnet_set_interface_output_node (vnm, hw_if_index, encap_index);
+
+ t->hw_if_index = hw_if_index;
+ t->sw_if_index = sw_if_index = hi->sw_if_index;
+ vec_validate_init_empty (ngm->tunnel_index_by_sw_if_index, sw_if_index,
+ ~0);
+ ngm->tunnel_index_by_sw_if_index[sw_if_index] = t - ngm->tunnels;
+
+ /* setup l2 input config with l2 feature and bd 0 to drop packet */
+ vec_validate (l2im->configs, sw_if_index);
+ l2im->configs[sw_if_index].feature_bitmap = L2INPUT_FEAT_DROP;
+ l2im->configs[sw_if_index].bd_index = 0;
+
+ vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, sw_if_index);
+ si->flags &= ~VNET_SW_INTERFACE_FLAG_HIDDEN;
+ vnet_sw_interface_set_flags (vnm, hi->sw_if_index,
+ VNET_SW_INTERFACE_FLAG_ADMIN_UP);
+ fib_node_init (&t->node, FIB_NODE_TYPE_VXLAN_GPE_TUNNEL);
+ fib_prefix_t tun_remote_pfx;
+ vnet_flood_class_t flood_class = VNET_FLOOD_CLASS_TUNNEL_NORMAL;
+
+ fib_protocol_t fp = fib_ip_proto (is_ip6);
+ fib_prefix_from_ip46_addr (fp, &t->remote, &tun_remote_pfx);
+ if (!ip46_address_is_multicast (&t->remote))
+ {
+ /* Unicast tunnel -
+ * source the FIB entry for the tunnel's destination
+ * and become a child thereof. The tunnel will then get poked
+ * when the forwarding for the entry updates, and the tunnel can
+ * re-stack accordingly
+ */
+ vtep_addr_ref (&ngm->vtep_table, t->encap_fib_index, &t->local);
+ t->fib_entry_index = fib_entry_track (t->encap_fib_index,
+ &tun_remote_pfx,
+ FIB_NODE_TYPE_VXLAN_GPE_TUNNEL,
+ t - ngm->tunnels,
+ &t->sibling_index);
+ vxlan_gpe_tunnel_restack_dpo (t);
+ }
+ else
+ {
+ /* Multicast tunnel -
+ * as the same mcast group can be used for multiple mcast tunnels
+ * with different VNIs, create the output fib adjacency only if
+ * it does not already exist
+ */
+ if (vtep_addr_ref (&ngm->vtep_table,
+ t->encap_fib_index, &t->remote) == 1)
+ {
+ fib_node_index_t mfei;
+ adj_index_t ai;
+ fib_route_path_t path = {
+ .frp_proto = fib_proto_to_dpo (fp),
+ .frp_addr = zero_addr,
+ .frp_sw_if_index = 0xffffffff,
+ .frp_fib_index = ~0,
+ .frp_weight = 1,
+ .frp_flags = FIB_ROUTE_PATH_LOCAL,
+ .frp_mitf_flags = MFIB_ITF_FLAG_FORWARD,
+ };
+ const mfib_prefix_t mpfx = {
+ .fp_proto = fp,
+ .fp_len = (is_ip6 ? 128 : 32),
+ .fp_grp_addr = tun_remote_pfx.fp_addr,
+ };
+
+ /*
+ * Setup the (*,G) to receive traffic on the mcast group
+ * - the forwarding interface is for-us
+ * - the accepting interface is that from the API
+ */
+ mfib_table_entry_path_update (t->encap_fib_index, &mpfx,
+ MFIB_SOURCE_VXLAN_GPE,
+ MFIB_ENTRY_FLAG_NONE, &path);
+
+ path.frp_sw_if_index = a->mcast_sw_if_index;
+ path.frp_flags = FIB_ROUTE_PATH_FLAG_NONE;
+ path.frp_mitf_flags = MFIB_ITF_FLAG_ACCEPT;
+ mfei = mfib_table_entry_path_update (
+ t->encap_fib_index, &mpfx, MFIB_SOURCE_VXLAN_GPE,
+ MFIB_ENTRY_FLAG_NONE, &path);
+
+ /*
+ * Create the mcast adjacency to send traffic to the group
+ */
+ ai = adj_mcast_add_or_lock (fp,
+ fib_proto_to_link (fp),
+ a->mcast_sw_if_index);
+
+ /*
+ * create a new end-point
+ */
+ mcast_shared_add (&t->remote, mfei, ai);
+ }
+
+ dpo_id_t dpo = DPO_INVALID;
+ mcast_shared_t ep = mcast_shared_get (&t->remote);
+
+ /* Stack shared mcast remote mac addr rewrite on encap */
+ dpo_set (&dpo, DPO_ADJACENCY_MCAST,
+ fib_proto_to_dpo (fp), ep.mcast_adj_index);
+
+ dpo_stack_from_node (encap_index, &t->next_dpo, &dpo);
+ dpo_reset (&dpo);
+ flood_class = VNET_FLOOD_CLASS_TUNNEL_MASTER;
+ }
+
+ vnet_get_sw_interface (vnet_get_main (), sw_if_index)->flood_class =
+ flood_class;
+ }
+ else
+ {
+ /* deleting a tunnel: tunnel must exist */
+ if (!p)
+ return VNET_API_ERROR_NO_SUCH_ENTRY;
+
+ t = pool_elt_at_index (ngm->tunnels, p[0]);
+
+ sw_if_index = t->sw_if_index;
+ vnet_sw_interface_set_flags (vnm, t->sw_if_index, 0 /* down */ );
+ vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, t->sw_if_index);
+ si->flags |= VNET_SW_INTERFACE_FLAG_HIDDEN;
+ set_int_l2_mode (ngm->vlib_main, vnm, MODE_L3, t->sw_if_index, 0,
+ L2_BD_PORT_TYPE_NORMAL, 0, 0);
+ vec_add1 (ngm->free_vxlan_gpe_tunnel_hw_if_indices, t->hw_if_index);
+
+ ngm->tunnel_index_by_sw_if_index[t->sw_if_index] = ~0;
+
+ if (!is_ip6)
+ hash_unset (ngm->vxlan4_gpe_tunnel_by_key, key4.as_u64);
+ else
+ hash_unset_mem_free (&ngm->vxlan6_gpe_tunnel_by_key, &key6);
+
+ if (!ip46_address_is_multicast (&t->remote))
+ {
+ vtep_addr_unref (&ngm->vtep_table, t->encap_fib_index, &t->local);
+ fib_entry_untrack (t->fib_entry_index, t->sibling_index);
+ }
+ else if (vtep_addr_unref (&ngm->vtep_table,
+ t->encap_fib_index, &t->remote) == 0)
+ {
+ mcast_shared_remove (&t->remote);
+ }
+
+ fib_node_deinit (&t->node);
+ vec_free (t->rewrite);
+ pool_put (ngm->tunnels, t);
+ }
+
+ if (sw_if_indexp)
+ *sw_if_indexp = sw_if_index;
+
+ if (a->is_add)
+ {
+ /* register udp ports */
+ if (!is_ip6 && !udp_is_valid_dst_port (a->local_port, 1))
+ udp_register_dst_port (ngm->vlib_main, a->local_port,
+ vxlan4_gpe_input_node.index, 1 /* is_ip4 */);
+ if (is_ip6 && !udp_is_valid_dst_port (a->remote_port, 0))
+ udp_register_dst_port (ngm->vlib_main, a->remote_port,
+ vxlan6_gpe_input_node.index, 0 /* is_ip4 */);
+ }
+
+ return 0;
+}
+
+static clib_error_t *
+vxlan_gpe_add_del_tunnel_command_fn (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ u8 is_add = 1;
+ ip46_address_t local, remote;
+ u8 local_set = 0;
+ u8 remote_set = 0;
+ u8 grp_set = 0;
+ u8 ipv4_set = 0;
+ u8 ipv6_set = 0;
+ u32 mcast_sw_if_index = ~0;
+ u32 encap_fib_index = 0;
+ u32 decap_fib_index = 0;
+ u8 protocol = VXLAN_GPE_PROTOCOL_IP4;
+ u32 vni;
+ u8 vni_set = 0;
+ u32 local_port = 0;
+ u32 remote_port = 0;
+ int rv;
+ u32 tmp;
+ vnet_vxlan_gpe_add_del_tunnel_args_t _a, *a = &_a;
+ u32 sw_if_index;
+ clib_error_t *error = NULL;
+
+ /* Get a line of input. */
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat (line_input, "del"))
+ is_add = 0;
+ else if (unformat (line_input, "local %U",
+ unformat_ip4_address, &local.ip4))
+ {
+ local_set = 1;
+ ipv4_set = 1;
+ }
+ else if (unformat (line_input, "remote %U",
+ unformat_ip4_address, &remote.ip4))
+ {
+ remote_set = 1;
+ ipv4_set = 1;
+ }
+ else if (unformat (line_input, "local %U",
+ unformat_ip6_address, &local.ip6))
+ {
+ local_set = 1;
+ ipv6_set = 1;
+ }
+ else if (unformat (line_input, "remote %U",
+ unformat_ip6_address, &remote.ip6))
+ {
+ remote_set = 1;
+ ipv6_set = 1;
+ }
+ else if (unformat (line_input, "group %U %U",
+ unformat_ip4_address, &remote.ip4,
+ unformat_vnet_sw_interface,
+ vnet_get_main (), &mcast_sw_if_index))
+ {
+ grp_set = remote_set = 1;
+ ipv4_set = 1;
+ }
+ else if (unformat (line_input, "group %U %U",
+ unformat_ip6_address, &remote.ip6,
+ unformat_vnet_sw_interface,
+ vnet_get_main (), &mcast_sw_if_index))
+ {
+ grp_set = remote_set = 1;
+ ipv6_set = 1;
+ }
+ else if (unformat (line_input, "encap-vrf-id %d", &tmp))
+ {
+ if (ipv6_set)
+ encap_fib_index = fib_table_find (FIB_PROTOCOL_IP6, tmp);
+ else
+ encap_fib_index = fib_table_find (FIB_PROTOCOL_IP4, tmp);
+
+ if (encap_fib_index == ~0)
+ {
+ error =
+ clib_error_return (0, "nonexistent encap fib id %d", tmp);
+ goto done;
+ }
+ }
+ else if (unformat (line_input, "decap-vrf-id %d", &tmp))
+ {
+ if (ipv6_set)
+ decap_fib_index = fib_table_find (FIB_PROTOCOL_IP6, tmp);
+ else
+ decap_fib_index = fib_table_find (FIB_PROTOCOL_IP4, tmp);
+
+ if (decap_fib_index == ~0)
+ {
+ error =
+ clib_error_return (0, "nonexistent decap fib id %d", tmp);
+ goto done;
+ }
+ }
+ else if (unformat (line_input, "vni %d", &vni))
+ vni_set = 1;
+ else if (unformat (line_input, "local_port %d", &local_port))
+ ;
+ else if (unformat (line_input, "remote_port %d", &remote_port))
+ ;
+ else if (unformat (line_input, "next-ip4"))
+ protocol = VXLAN_GPE_PROTOCOL_IP4;
+ else if (unformat (line_input, "next-ip6"))
+ protocol = VXLAN_GPE_PROTOCOL_IP6;
+ else if (unformat (line_input, "next-ethernet"))
+ protocol = VXLAN_GPE_PROTOCOL_ETHERNET;
+ else if (unformat (line_input, "next-nsh"))
+ protocol = VXLAN_GPE_PROTOCOL_NSH;
+ else
+ {
+ error = clib_error_return (0, "parse error: '%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+ }
+
+ if (local_set == 0)
+ {
+ error = clib_error_return (0, "tunnel local address not specified");
+ goto done;
+ }
+
+ if (remote_set == 0)
+ {
+ error = clib_error_return (0, "tunnel remote address not specified");
+ goto done;
+ }
+
+ if (grp_set && !ip46_address_is_multicast (&remote))
+ {
+ error = clib_error_return (0, "tunnel group address not multicast");
+ goto done;
+ }
+
+ if (grp_set == 0 && ip46_address_is_multicast (&remote))
+ {
+ error = clib_error_return (0, "remote address must be unicast");
+ goto done;
+ }
+
+ if (grp_set && mcast_sw_if_index == ~0)
+ {
+ error = clib_error_return (0, "tunnel nonexistent multicast device");
+ goto done;
+ }
+ if (ipv4_set && ipv6_set)
+ {
+ error = clib_error_return (0, "both IPv4 and IPv6 addresses specified");
+ goto done;
+ }
+
+ if ((ipv4_set && memcmp (&local.ip4, &remote.ip4, sizeof (local.ip4)) == 0)
+ || (ipv6_set
+ && memcmp (&local.ip6, &remote.ip6, sizeof (local.ip6)) == 0))
+ {
+ error = clib_error_return (0, "src and remote addresses are identical");
+ goto done;
+ }
+
+ if (vni_set == 0)
+ {
+ error = clib_error_return (0, "vni not specified");
+ goto done;
+ }
+
+ clib_memset (a, 0, sizeof (*a));
+
+ a->is_add = is_add;
+ a->is_ip6 = ipv6_set;
+
+#define _(x) a->x = x;
+ foreach_gpe_copy_field;
+ if (ipv4_set)
+ foreach_copy_ipv4
+ else
+ foreach_copy_ipv6
+#undef _
+
+ rv = vnet_vxlan_gpe_add_del_tunnel (a, &sw_if_index);
+
+ switch (rv)
+ {
+ case 0:
+ vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name,
+ vnet_get_main (), sw_if_index);
+ break;
+ case VNET_API_ERROR_INVALID_DECAP_NEXT:
+ error = clib_error_return (0, "invalid decap-next...");
+ goto done;
+
+ case VNET_API_ERROR_TUNNEL_EXIST:
+ error = clib_error_return (0, "tunnel already exists...");
+ goto done;
+
+ case VNET_API_ERROR_NO_SUCH_ENTRY:
+ error = clib_error_return (0, "tunnel does not exist...");
+ goto done;
+
+ default:
+ error = clib_error_return
+ (0, "vnet_vxlan_gpe_add_del_tunnel returned %d", rv);
+ goto done;
+ }
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+/*?
+ * Add or delete a VXLAN-GPE Tunnel.
+ *
+ * VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs)
+ * to span multiple servers. This is done by building an L2 overlay on
+ * top of an L3 network underlay using VXLAN-GPE tunnels.
+ *
+ * This makes it possible for servers to be co-located in the same data
+ * center or be separated geographically as long as they are reachable
+ * through the underlay L3 network.
+ *
+ * You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment.
+ *
+ * @cliexpar
+ * Example of how to create a VXLAN-GPE Tunnel:
+ * @cliexcmd{create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 encap-vrf-id 7}
+ * Example of how to delete a VXLAN-GPE Tunnel:
+ * @cliexcmd{create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 del}
+ ?*/
+VLIB_CLI_COMMAND (create_vxlan_gpe_tunnel_command, static) = {
+ .path = "create vxlan-gpe tunnel",
+ .short_help =
+ "create vxlan-gpe tunnel local <local-addr> "
+ " {remote <remote-addr>|group <mcast-addr> <intf-name>}"
+ " vni <nn> [next-ip4][next-ip6][next-ethernet][next-nsh]"
+ " [encap-vrf-id <nn>] [decap-vrf-id <nn>] [del]\n",
+ .function = vxlan_gpe_add_del_tunnel_command_fn,
+};
+
+/**
+ * @brief CLI function for showing VXLAN GPE tunnels
+ *
+ * @param *vm
+ * @param *input
+ * @param *cmd
+ *
+ * @return error
+ *
+ */
+static clib_error_t *
+show_vxlan_gpe_tunnel_command_fn (vlib_main_t * vm,
+ unformat_input_t * input,
+ vlib_cli_command_t * cmd)
+{
+ vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
+ vxlan_gpe_tunnel_t *t;
+
+ if (pool_elts (ngm->tunnels) == 0)
+ vlib_cli_output (vm, "No vxlan-gpe tunnels configured.");
+
+ pool_foreach (t, ngm->tunnels)
+ {
+ vlib_cli_output (vm, "%U", format_vxlan_gpe_tunnel, t);
+ }
+
+ return 0;
+}
+
+/*?
+ * Display all the VXLAN-GPE Tunnel entries.
+ *
+ * @cliexpar
+ * Example of how to display the VXLAN-GPE Tunnel entries:
+ * @cliexstart{show vxlan-gpe tunnel}
+ * [0] local 10.0.3.1 remote 10.0.3.3 vni 13 encap_fib_index 0 sw_if_index 5 decap_next l2
+ * @cliexend
+ ?*/
+VLIB_CLI_COMMAND (show_vxlan_gpe_tunnel_command, static) = {
+ .path = "show vxlan-gpe",
+ .function = show_vxlan_gpe_tunnel_command_fn,
+};
+
+void
+vnet_int_vxlan_gpe_bypass_mode (u32 sw_if_index, u8 is_ip6, u8 is_enable)
+{
+ if (is_ip6)
+ vnet_feature_enable_disable ("ip6-unicast", "ip6-vxlan-gpe-bypass",
+ sw_if_index, is_enable, 0, 0);
+ else
+ vnet_feature_enable_disable ("ip4-unicast", "ip4-vxlan-gpe-bypass",
+ sw_if_index, is_enable, 0, 0);
+}
+
+
+static clib_error_t *
+set_ip_vxlan_gpe_bypass (u32 is_ip6,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ unformat_input_t _line_input, *line_input = &_line_input;
+ vnet_main_t *vnm = vnet_get_main ();
+ clib_error_t *error = 0;
+ u32 sw_if_index, is_enable;
+
+ sw_if_index = ~0;
+ is_enable = 1;
+
+ if (!unformat_user (input, unformat_line_input, line_input))
+ return 0;
+
+ while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+ {
+ if (unformat_user
+ (line_input, unformat_vnet_sw_interface, vnm, &sw_if_index))
+ ;
+ else if (unformat (line_input, "del"))
+ is_enable = 0;
+ else
+ {
+ error = unformat_parse_error (line_input);
+ goto done;
+ }
+ }
+
+ if (~0 == sw_if_index)
+ {
+ error = clib_error_return (0, "unknown interface `%U'",
+ format_unformat_error, line_input);
+ goto done;
+ }
+
+ vnet_int_vxlan_gpe_bypass_mode (sw_if_index, is_ip6, is_enable);
+
+done:
+ unformat_free (line_input);
+
+ return error;
+}
+
+static clib_error_t *
+set_ip4_vxlan_gpe_bypass (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ return set_ip_vxlan_gpe_bypass (0, input, cmd);
+}
+
+/*?
+ * This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given
+ * interface. By adding the IPv4 vxlan-gpe-bypass graph node to an interface,
+ * the node checks for and validate input vxlan_gpe packet and bypass
+ * ip4-lookup, ip4-local, ip4-udp-lookup nodes to speedup vxlan_gpe packet
+ * forwarding. This node will cause extra overhead to for non-vxlan_gpe
+ * packets which is kept at a minimum.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of graph node before ip4-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip4-vxlan-gpe-bypass error-drop [0]
+ * vxlan4-gpe-input [1]
+ * ip4-lookup [2]
+ * @cliexend
+ *
+ * Example of how to enable ip4-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0}
+ *
+ * Example of graph node after ip4-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip4-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip4-vxlan-gpe-bypass error-drop [0] ip4-input
+ * vxlan4-gpe-input [1] ip4-input-no-checksum
+ * ip4-lookup [2]
+ * @cliexend
+ *
+ * Example of how to display the feature enabled on an interface:
+ * @cliexstart{show ip interface features GigabitEthernet2/0/0}
+ * IP feature paths configured on GigabitEthernet2/0/0...
+ * ...
+ * ipv4 unicast:
+ * ip4-vxlan-gpe-bypass
+ * ip4-lookup
+ * ...
+ * @cliexend
+ *
+ * Example of how to disable ip4-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 del}
+ * @endparblock
+?*/
+VLIB_CLI_COMMAND (set_interface_ip_vxlan_gpe_bypass_command, static) = {
+ .path = "set interface ip vxlan-gpe-bypass",
+ .function = set_ip4_vxlan_gpe_bypass,
+ .short_help = "set interface ip vxlan-gpe-bypass <interface> [del]",
+};
+
+static clib_error_t *
+set_ip6_vxlan_gpe_bypass (vlib_main_t * vm,
+ unformat_input_t * input, vlib_cli_command_t * cmd)
+{
+ return set_ip_vxlan_gpe_bypass (1, input, cmd);
+}
+
+/*?
+ * This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given
+ * interface. By adding the IPv6 vxlan-gpe-bypass graph node to an interface,
+ * the node checks for and validate input vxlan_gpe packet and bypass
+ * ip6-lookup, ip6-local, ip6-udp-lookup nodes to speedup vxlan_gpe packet
+ * forwarding. This node will cause extra overhead to for non-vxlan_gpe packets
+ * which is kept at a minimum.
+ *
+ * @cliexpar
+ * @parblock
+ * Example of graph node before ip6-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip6-vxlan-gpe-bypass error-drop [0]
+ * vxlan6-gpe-input [1]
+ * ip6-lookup [2]
+ * @cliexend
+ *
+ * Example of how to enable ip6-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0}
+ *
+ * Example of graph node after ip6-vxlan-gpe-bypass is enabled:
+ * @cliexstart{show vlib graph ip6-vxlan-gpe-bypass}
+ * Name Next Previous
+ * ip6-vxlan-gpe-bypass error-drop [0] ip6-input
+ * vxlan6-gpe-input [1] ip4-input-no-checksum
+ * ip6-lookup [2]
+ * @cliexend
+ *
+ * Example of how to display the feature enabled on an interface:
+ * @cliexstart{show ip interface features GigabitEthernet2/0/0}
+ * IP feature paths configured on GigabitEthernet2/0/0...
+ * ...
+ * ipv6 unicast:
+ * ip6-vxlan-gpe-bypass
+ * ip6-lookup
+ * ...
+ * @cliexend
+ *
+ * Example of how to disable ip6-vxlan-gpe-bypass on an interface:
+ * @cliexcmd{set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 del}
+ * @endparblock
+?*/
+VLIB_CLI_COMMAND (set_interface_ip6_vxlan_gpe_bypass_command, static) = {
+ .path = "set interface ip6 vxlan-gpe-bypass",
+ .function = set_ip6_vxlan_gpe_bypass,
+ .short_help = "set interface ip6 vxlan-gpe-bypass <interface> [del]",
+};
+
+VNET_FEATURE_INIT (ip4_vxlan_gpe_bypass, static) =
+{
+ .arc_name = "ip4-unicast",
+ .node_name = "ip4-vxlan-gpe-bypass",
+ .runs_before = VNET_FEATURES ("ip4-lookup"),
+};
+
+VNET_FEATURE_INIT (ip6_vxlan_gpe_bypass, static) =
+{
+ .arc_name = "ip6-unicast",
+ .node_name = "ip6-vxlan-gpe-bypass",
+ .runs_before = VNET_FEATURES ("ip6-lookup"),
+};
+
+/**
+ * @brief Feature init function for VXLAN GPE
+ *
+ * @param *vm
+ *
+ * @return error
+ *
+ */
+__clib_export clib_error_t *
+vxlan_gpe_init (vlib_main_t *vm)
+{
+ vxlan_gpe_main_t *ngm = &vxlan_gpe_main;
+
+ ngm->register_decap_protocol = vxlan_gpe_register_decap_protocol;
+ ngm->unregister_decap_protocol = vxlan_gpe_unregister_decap_protocol;
+ ngm->vnet_main = vnet_get_main ();
+ ngm->vlib_main = vm;
+
+ ngm->vxlan4_gpe_tunnel_by_key
+ = hash_create_mem (0, sizeof (vxlan4_gpe_tunnel_key_t), sizeof (uword));
+
+ ngm->vxlan6_gpe_tunnel_by_key
+ = hash_create_mem (0, sizeof (vxlan6_gpe_tunnel_key_t), sizeof (uword));
+
+
+ ngm->mcast_shared = hash_create_mem (0,
+ sizeof (ip46_address_t),
+ sizeof (mcast_shared_t));
+ ngm->vtep_table = vtep_table_create ();
+
+ /* Register the list of standard decap protocols supported */
+ vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_IP4,
+ VXLAN_GPE_INPUT_NEXT_IP4_INPUT);
+ vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_IP6,
+ VXLAN_GPE_INPUT_NEXT_IP6_INPUT);
+ vxlan_gpe_register_decap_protocol (VXLAN_GPE_PROTOCOL_ETHERNET,
+ VXLAN_GPE_INPUT_NEXT_L2_INPUT);
+
+ fib_node_register_type (FIB_NODE_TYPE_VXLAN_GPE_TUNNEL, &vxlan_gpe_vft);
+
+ return 0;
+}
+
+VLIB_INIT_FUNCTION (vxlan_gpe_init);
+
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */