summaryrefslogtreecommitdiffstats
path: root/src/plugins
diff options
context:
space:
mode:
Diffstat (limited to 'src/plugins')
-rw-r--r--src/plugins/snat/nat64_cli.c138
-rw-r--r--src/plugins/snat/nat64_doc.md73
2 files changed, 211 insertions, 0 deletions
diff --git a/src/plugins/snat/nat64_cli.c b/src/plugins/snat/nat64_cli.c
index 25345cd818d..32f671d5c64 100644
--- a/src/plugins/snat/nat64_cli.c
+++ b/src/plugins/snat/nat64_cli.c
@@ -713,6 +713,18 @@ nat64_show_prefix_command_fn (vlib_main_t * vm, unformat_input_t * input,
/* *INDENT-OFF* */
+/*?
+ * @cliexpar
+ * @cliexstart{nat64 add pool address}
+ * Add/delete NAT64 pool address.
+ * To add single NAT64 pool address use:
+ * vpp# nat64 add pool address 10.1.1.10
+ * To add NAT64 pool address range use:
+ * vpp# nat64 add pool address 10.1.1.2 - 10.1.1.5
+ * To add NAT64 pool address for specific tenant use:
+ * vpp# nat64 add pool address 10.1.1.100 tenant-vrf 100
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (nat64_add_pool_address_command, static) = {
.path = "nat64 add pool address",
.short_help = "nat64 add pool address <ip4-range-start> [- <ip4-range-end>] "
@@ -720,24 +732,64 @@ VLIB_CLI_COMMAND (nat64_add_pool_address_command, static) = {
.function = nat64_add_del_pool_addr_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 pool}
+ * Show NAT64 pool.
+ * vpp# show nat64 pool
+ * NAT64 pool:
+ * 10.1.1.3 tenant VRF: 0
+ * 10.1.1.10 tenant VRF: 10
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_pool_command, static) = {
.path = "show nat64 pool",
.short_help = "show nat64 pool",
.function = nat64_show_pool_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{set interface nat64}
+ * Enable/disable NAT64 feature on the interface.
+ * To enable NAT64 feature with local (IPv6) network interface
+ * GigabitEthernet0/8/0 and external (IPv4) network interface
+ * GigabitEthernet0/a/0 use:
+ * vpp# set interface nat64 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (set_interface_nat64_command, static) = {
.path = "set interface nat64",
.short_help = "set interface nat64 in|out <intfc> [del]",
.function = nat64_interface_feature_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 interfaces}
+ * Show interfaces with NAT64 feature.
+ * To show interfaces with NAT64 feature use:
+ * vpp# show nat64 interfaces
+ * NAT64 interfaces:
+ * GigabitEthernet0/8/0 in
+ * GigabitEthernet0/a/0 out
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_interfaces_command, static) = {
.path = "show nat64 interfaces",
.short_help = "show nat64 interfaces",
.function = nat64_show_interfaces_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{nat64 add static bib}
+ * Add/delete NAT64 static BIB entry.
+ * To create NAT64 satatic BIB entry use:
+ * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp
+ * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (nat64_add_del_static_bib_command, static) = {
.path = "nat64 add static bib",
.short_help = "nat64 add static bib <ip6-addr> <port> <ip4-addr> <port> "
@@ -745,12 +797,42 @@ VLIB_CLI_COMMAND (nat64_add_del_static_bib_command, static) = {
.function = nat64_add_del_static_bib_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 bib}
+ * Show NAT64 BIB entries.
+ * To show NAT64 TCP BIB entries use:
+ * vpp# show nat64 bib tcp
+ * NAT64 tcp BIB:
+ * fd01:1::2 6303 10.0.0.3 62303 tcp vrf 0 dynamic 1 sessions
+ * 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp vrf 0 static 2 sessions
+ * To show NAT64 UDP BIB entries use:
+ * vpp# show nat64 bib udp
+ * NAT64 udp BIB:
+ * fd01:1::2 6304 10.0.0.3 10546 udp vrf 0 dynamic 10 sessions
+ * 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 static 0 sessions
+ * To show NAT64 ICMP BIB entries use:
+ * vpp# show nat64 bib icmp
+ * NAT64 icmp BIB:
+ * fd01:1::2 6305 10.0.0.3 63209 icmp vrf 10 dynamic 1 sessions
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_bib_command, static) = {
.path = "show nat64 bib",
.short_help = "show nat64 bib tcp|udp|icmp",
.function = nat64_show_bib_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{set nat64 timeouts}
+ * Set NAT64 session timeouts (in seconds).
+ * To set NAT64 session timeoutes use use:
+ * vpp# set nat64 timeouts udp 200 icmp 30 tcp-trans 250 tcp-est 7450
+ * To reset NAT64 session timeoutes to default values use:
+ * vpp# set nat64 timeouts reset
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = {
.path = "set nat64 timeouts",
.short_help = "set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> "
@@ -758,18 +840,63 @@ VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = {
.function = nat64_set_timeouts_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 tiemouts}
+ * Show NAT64 session timeouts:
+ * vpp# show nat64 tiemouts
+ * NAT64 session timeouts:
+ * UDP 300sec
+ * ICMP 60sec
+ * TCP transitory 240sec
+ * TCP established 7440sec
+ * TCP incoming SYN 6sec
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_timeouts_command, static) = {
.path = "show nat64 tiemouts",
.short_help = "show nat64 tiemouts",
.function = nat64_show_timeouts_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 session table}
+ * Show NAT64 session table.
+ * To show NAT64 TCP session table use:
+ * vpp# show nat64 session table tcp
+ * NAT64 tcp session table:
+ * fd01:1::2 6303 64:ff9b::ac10:202 20 10.0.0.3 62303 172.16.2.2 20 tcp vrf 0
+ * fd01:3::2 6303 64:ff9b::ac10:202 20 10.0.10.3 21300 172.16.2.2 20 tcp vrf 10
+ * To show NAT64 UDP session table use:
+ * #vpp show nat64 session table udp
+ * NAT64 udp session table:
+ * fd01:1::2 6304 64:ff9b::ac10:202 20 10.0.0.3 10546 172.16.2.2 20 udp vrf 0
+ * fd01:3::2 6304 64:ff9b::ac10:202 20 10.0.10.3 58627 172.16.2.2 20 udp vrf 10
+ * fd01:1::2 1235 64:ff9b::a00:3 4023 10.0.0.3 24488 10.0.0.3 4023 udp vrf 0
+ * fd01:1::3 23 64:ff9b::a00:3 24488 10.0.0.3 4023 10.0.0.3 24488 udp vrf 0
+ * To show NAT64 ICMP session table use:
+ * #vpp show nat64 session table icmp
+ * NAT64 icmp session table:
+ * fd01:1::2 64:ff9b::ac10:202 6305 10.0.0.3 172.16.2.2 63209 icmp vrf 0
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_st_command, static) = {
.path = "show nat64 session table",
.short_help = "show nat64 session table tcp|udp|icmp",
.function = nat64_show_st_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{nat64 add prefix}
+ * Set NAT64 prefix for generating IPv6 representations of IPv4 addresses.
+ * To set NAT64 global prefix use:
+ * vpp# nat64 add prefix 2001:db8::/32
+ * To set NAT64 prefix for specific tenant use:
+ * vpp# nat64 add prefix 2001:db8:122:300::/56 tenant-vrf 10
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (nat64_add_del_prefix_command, static) = {
.path = "nat64 add prefix",
.short_help = "nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] "
@@ -777,6 +904,17 @@ VLIB_CLI_COMMAND (nat64_add_del_prefix_command, static) = {
.function = nat64_add_del_prefix_command_fn,
};
+/*?
+ * @cliexpar
+ * @cliexstart{show nat64 prefix}
+ * Show NAT64 prefix.
+ * To show NAT64 prefix use:
+ * vpp# show nat64 prefix
+ * NAT64 prefix:
+ * 2001:db8::/32 tenant-vrf 0
+ * 2001:db8:122:300::/56 tenant-vrf 10
+ * @cliexend
+?*/
VLIB_CLI_COMMAND (show_nat64_prefix_command, static) = {
.path = "show nat64 prefix",
.short_help = "show nat64 prefix",
diff --git a/src/plugins/snat/nat64_doc.md b/src/plugins/snat/nat64_doc.md
new file mode 100644
index 00000000000..f94467dade1
--- /dev/null
+++ b/src/plugins/snat/nat64_doc.md
@@ -0,0 +1,73 @@
+# Stateful NAT64: Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers {#nat64_doc}
+
+## Introduction
+
+Stateful NAT64 in VPP allows IPv6-only clients to contact IPv4 servers using unicast UDP, TCP, or ICMP based on RFC 6146.
+
+## Configuration
+
+### Enable/disable NAT64 feature on the interface
+
+> set interface nat64 in|out <intfc> [del]
+
+in: inside/local/IPv6 network
+out: outside/external/IPv4 network
+intfc: interface name
+
+### Add/delete NAT64 pool address
+
+One or more public IPv4 addresses assigned to a NAT64 are shared among several IPv6-only clients.
+
+> nat64 add pool address <ip4-range-start> [- <ip4-range-end>] [tenant-vrf <tenant-vrf-id>] [del]
+
+ip4-range-start: First IPv4 address of the range
+ip4-range-end: Last IPv4 address of the range (optional, not used for single address)
+tenant-vrf-id: VRF id of the tenant associated with the pool address (optional, if not set pool address is global)
+
+### Add/delete static BIB entry
+
+Stateful NAT64 also supports IPv4-initiated communications to a subset of the IPv6 hosts through staticaly configured bindings.
+
+> nat64 add static bib <ip6-addr> <in-port> <ip4-addr> <out-port> tcp|udp|icmp [vfr <table-id>] [del]
+
+ip6-addr: inside IPv6 address of the host
+in-port: inside port or ICMPv6 identifier
+ip4-addr: outside IPv4 address of the host
+out-port: outside port or ICMPv4 identifier
+table-id: VRF id of the tenant associated with the BIB entry (optional, default use global VRF)
+
+### Set NAT64 session timeouts
+
+Session is deleted when timer expires. If all sessions corresponding to a dynamically create BIB entry are deleted, then the BIB entry is also deleted. When packets are flowing sessiom timer is refreshed to keep the session alive.
+
+> set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> tcp-est <sec> tcp-incoming-syn <sec> | reset
+
+udp: UDP session timeout value (default 300sec)
+icmp: ICMP session timeout value (default 60sec)
+tcp-trans: transitory TCP session timeout value (default 240sec)
+tcp-est: established TCP session timeout value (default 7440sec)
+tcp-incoming-syn: incoming SYN TCP session timeout value (default 6sec)
+reset: reset timers to default values
+
+### Set NAT64 prefix
+
+Stateful NAT64 support the algorithm for generating IPv6 representations of IPv4 addresses defined in RFC 6052. If no prefix is configured, Well-Known Prefix (64:ff9b::/96) is used.
+
+> nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] [del]
+
+ip6-prefix: IPv6 prefix
+plen: prefix length (valid values: 32, 40, 48, 56, 64, or 96)
+tenant-vrf: VRF id of the tenant associated with the prefix
+
+### Show commands
+
+> show nat64 pool
+> show nat64 interfaces
+> show nat64 bib tcp|udp|icmp
+> show nat64 session table tcp|udp|icmp
+> show nat64 tiemouts
+> show nat64 prefix
+
+## Notes
+
+Multi thread is not supported yet (CLI/API commands are disabled when VPP runs with multiple threads).