4 files changed, 59 insertions, 0 deletions
diff --git a/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf b/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf
new file mode 100644
index 00000000000..dd37b942062
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf
@@ -0,0 +1,17 @@
+comment { vpe_phase2 configuration }
+
+comment { local client facing interface  }
+comment { configure lc2 eth1 at e.g. 6.0.2.2/24 }
+
+set int ip table GigabitEthernet2/2/0 1
+set int ip address GigabitEthernet2/2/0 6.0.2.1/24
+set int state GigabitEthernet2/2/0 up
+
+comment { tunnel to rightpeer }
+set int ip address GigabitEthernet2/3/0 6.0.3.1/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.4.1
+mpls decap add label 30 fib 1
+
+create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1
diff --git a/src/scripts/vnet/mpls-o-ethernet/pg b/src/scripts/vnet/mpls-o-ethernet/pg
new file mode 100644
index 00000000000..ba5397f7648
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-ethernet/pg
@@ -0,0 +1,10 @@
+packet-generator new {
+  name x
+  limit 1
+  node mpls-ethernet-input
+  size 68-68
+  no-recycle
+  data {
+   hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627
+  }
+}
+\ No newline at end of file
diff --git a/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf b/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf
new file mode 100644
index 00000000000..7709ce4d584
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf
@@ -0,0 +1,15 @@
+comment { local client facing interface }
+comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
+
+set int ip table GigabitEthernet2/4/0 1
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to leftpeer }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.2.1
+mpls decap add label 30 fib 1
+
+create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1
diff --git a/src/scripts/vnet/mpls-o-ethernet/single.conf b/src/scripts/vnet/mpls-o-ethernet/single.conf
new file mode 100644
index 00000000000..2a25d35512c
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-ethernet/single.conf
@@ -0,0 +1,17 @@
+comment { single node configuration }
+
+loop create
+loop create
+set int state loop0 up
+set int state loop1 up
+
+set int ip address loop0 1.0.0.1/24
+set int ip address loop1 2.0.0.1/24
+
+
+ip route add 2.2.2.2/32 via 2.0.0.2 loop1
+
+mpls encap add label 30 fib 0 dest 2.2.2.2
+mpls decap add label 30 fib 0
+
+create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 2.2.2.2/32 tx-intfc loop1 fib-id 0