3 files changed, 144 insertions, 0 deletions
diff --git a/src/scripts/vnet/mpls-o-gre/dhcpd.conf b/src/scripts/vnet/mpls-o-gre/dhcpd.conf
new file mode 100644
index 00000000000..f0f659cd55f
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-gre/dhcpd.conf
@@ -0,0 +1,116 @@
+#
+# Sample configuration file for ISC dhcpd for Debian
+#
+# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
+# configuration file instead of this file.
+#
+#
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# option definitions common to all supported networks...
+option domain-name "example.org";
+option domain-name-servers ns1.example.org, ns2.example.org;
+
+default-lease-time 600;
+max-lease-time 7200;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the 
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+#subnet 10.254.239.0 netmask 255.255.255.224 {
+#  range 10.254.239.10 10.254.239.20;
+#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
+#}
+
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+#subnet 10.254.239.32 netmask 255.255.255.224 {
+#  range dynamic-bootp 10.254.239.40 10.254.239.60;
+#  option broadcast-address 10.254.239.31;
+#  option routers rtr-239-32-1.example.org;
+#}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+#  range 10.5.5.26 10.5.5.30;
+#  option domain-name-servers ns1.internal.example.org;
+#  option domain-name "internal.example.org";
+#  option routers 10.5.5.1;
+#  option broadcast-address 10.5.5.31;
+#  default-lease-time 600;
+#  max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements.   If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration.
+
+#host passacaglia {
+#  hardware ethernet 0:0:c0:5d:bd:95;
+#  filename "vmunix.passacaglia";
+#  server-name "toccata.fugue.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts.   These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+#host fantasia {
+#  hardware ethernet 08:00:07:26:c0:a5;
+#  fixed-address fantasia.fugue.com;
+#}
+
+# You can declare a class of clients and then do address allocation
+# based on that.   The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+#  subnet 10.17.224.0 netmask 255.255.255.0 {
+#    option routers rtr-224.example.org;
+#  }
+#  subnet 10.0.29.0 netmask 255.255.255.0 {
+#    option routers rtr-29.example.org;
+#  }
+#  pool {
+#    allow members of "foo";
+#    range 10.17.224.10 10.17.224.250;
+#  }
+#  pool {
+#    deny members of "foo";
+#    range 10.0.29.10 10.0.29.230;
+#  }
+#}
+subnet 6.0.0.0 netmask 255.255.0.0 {
+   range 6.0.2.2 6.0.2.5;
+   option routers 6.0.2.1;
+   default-lease-time 15;
+   max-lease-time 15;
+}
diff --git a/src/scripts/vnet/mpls-o-gre/leftpeer.conf b/src/scripts/vnet/mpls-o-gre/leftpeer.conf
new file mode 100644
index 00000000000..149c70c068d
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-gre/leftpeer.conf
@@ -0,0 +1,14 @@
+comment { left linux ping target configure at e.g. 6.0.2.2/24 }
+
+set int ip table GigabitEthernet2/2/0 1
+set int ip address GigabitEthernet2/2/0 6.0.2.1/24
+set int state GigabitEthernet2/2/0 up
+
+comment { tunnel to rightpeer }
+set int ip address GigabitEthernet2/3/0 6.0.3.1/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.3.3
+mpls decap add label 30 fib 1
+
+create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0
diff --git a/src/scripts/vnet/mpls-o-gre/rightpeer.conf b/src/scripts/vnet/mpls-o-gre/rightpeer.conf
new file mode 100644
index 00000000000..b5bb597db49
--- /dev/null
+++ b/src/scripts/vnet/mpls-o-gre/rightpeer.conf
@@ -0,0 +1,14 @@
+comment { right linux ping target configure  e.g. 6.0.4.4/24 }
+
+set int ip table GigabitEthernet2/4/0 1
+set int ip address GigabitEthernet2/4/0 6.0.4.1/24
+set int state GigabitEthernet2/4/0 up
+
+comment { tunnel to leftpeer }
+set int ip address GigabitEthernet2/3/0 6.0.3.3/24
+set int state GigabitEthernet2/3/0 up
+
+mpls encap add label 30 fib 1 dest 6.0.3.1
+mpls decap add label 30 fib 1
+
+create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0