diff options
Diffstat (limited to 'src/vnet/ip/ip.api')
| -rw-r--r-- | src/vnet/ip/ip.api | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/src/vnet/ip/ip.api b/src/vnet/ip/ip.api index 9398ad5afde..4569c33ecea 100644 --- a/src/vnet/ip/ip.api +++ b/src/vnet/ip/ip.api @@ -608,6 +608,212 @@ autoreply define ip_container_proxy_add_del u8 is_add; }; +/** \brief Configure IP source and L4 port-range check + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param is_ip6 - 1 if source address type is IPv6 + @param is_add - 1 if add, 0 if delete + @param mask_length - mask length for address entry + @param address - array of address bytes + @param number_of_ranges - length of low_port and high_port arrays (must match) + @param low_ports[32] - up to 32 low end of port range entries (must have corresponding high_ports entry) + @param high_ports[32] - up to 32 high end of port range entries (must have corresponding low_ports entry) + @param vrf_id - fib table/vrf id to associate the source and port-range check with + @note To specify a single port set low_port and high_port entry the same +*/ +autoreply define ip_source_and_port_range_check_add_del +{ + u32 client_index; + u32 context; + u8 is_ipv6; + u8 is_add; + u8 mask_length; + u8 address[16]; + u8 number_of_ranges; + u16 low_ports[32]; + u16 high_ports[32]; + u32 vrf_id; +}; + +/** \brief Set interface source and L4 port-range request + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param interface_id - interface index + @param tcp_vrf_id - VRF associated with source and TCP port-range check + @param udp_vrf_id - VRF associated with source and TCP port-range check +*/ +autoreply define ip_source_and_port_range_check_interface_add_del +{ + u32 client_index; + u32 context; + u8 is_add; + u32 sw_if_index; + u32 tcp_in_vrf_id; + u32 tcp_out_vrf_id; + u32 udp_in_vrf_id; + u32 udp_out_vrf_id; +}; + +/** \brief Register for ip4 arp resolution events + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param enable_disable - 1 => register for events, 0 => cancel registration + @param pid - sender's pid + @param address - the exact ip4 address of interest +*/ +autoreply define want_ip4_arp_events +{ + u32 client_index; + u32 context; + u8 enable_disable; + u32 pid; + u32 address; +}; + +/** \brief Tell client about an ip4 arp resolution event + @param client_index - opaque cookie to identify the sender + @param address - the exact ip4 address of interest + @param pid - client pid registered to receive notification + @param sw_if_index - interface which received ARP packet + @param new_mac - the new mac address + @param mac_ip - 0: resolution event, 1: mac/ip binding in bd +*/ +define ip4_arp_event +{ + u32 client_index; + u32 address; + u32 pid; + u32 sw_if_index; + u8 new_mac[6]; + u8 mac_ip; +}; + +/** \brief Register for ip6 nd resolution events + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param enable_disable - 1 => register for events, 0 => cancel registration + @param pid - sender's pid + @param address - the exact ip6 address of interest +*/ +autoreply define want_ip6_nd_events +{ + u32 client_index; + u32 context; + u8 enable_disable; + u32 pid; + u8 address[16]; +}; + +/** \brief Tell client about an ip6 nd resolution or mac/ip event + @param client_index - opaque cookie to identify the sender + @param pid - client pid registered to receive notification + @param sw_if_index - interface which received ARP packet + @param address - the exact ip6 address of interest + @param new_mac - the new mac address + @param mac_ip - 0: resolution event, 1: mac/ip binding in bd +*/ +define ip6_nd_event +{ + u32 client_index; + u32 pid; + u32 sw_if_index; + u8 address[16]; + u8 new_mac[6]; + u8 mac_ip; +}; + +/** \brief Proxy ARP add / del request + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param vrf_id - VRF / Fib table ID + @param is_add - 1 if adding the Proxy ARP range, 0 if deleting + @param low_address[4] - Low address of the Proxy ARP range + @param hi_address[4] - High address of the Proxy ARP range +*/ +autoreply define proxy_arp_add_del +{ + u32 client_index; + u32 context; + u32 vrf_id; + u8 is_add; + u8 low_address[4]; + u8 hi_address[4]; +}; + +/** \brief Proxy ARP add / del request + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param sw_if_index - Which interface to enable / disable Proxy Arp on + @param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable +*/ +autoreply define proxy_arp_intfc_enable_disable +{ + u32 client_index; + u32 context; + u32 sw_if_index; + /* 1 = on, 0 = off */ + u8 enable_disable; +}; + +/** \brief Reset fib table request + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param vrf_id - vrf/table id of the fib table to reset + @param is_ipv6 - an ipv6 fib to reset if non-zero, else ipv4 +*/ +autoreply define reset_fib +{ + u32 client_index; + u32 context; + u32 vrf_id; + u8 is_ipv6; +}; + +/** \brief Set max allowed ARP or ip6 neighbor entries request + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param is_ipv6 - neighbor limit if non-zero, else ARP limit + @param arp_neighbor_limit - the new limit, defaults are ~ 50k +*/ +autoreply define set_arp_neighbor_limit +{ + u32 client_index; + u32 context; + u8 is_ipv6; + u32 arp_neighbor_limit; +}; + +/** \brief IOAM enable : Enable in-band OAM + @param id - profile id + @param seqno - To enable Seqno Processing + @param analyse - Enabling analysis of iOAM at decap node + @param pow_enable - Proof of Work enabled or not flag + @param trace_enable - iOAM Trace enabled or not flag +*/ +autoreply define ioam_enable +{ + u32 client_index; + u32 context; + u16 id; + u8 seqno; + u8 analyse; + u8 pot_enable; + u8 trace_enable; + u32 node_id; +}; + +/** \brief iOAM disable + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param index - MAP Domain index +*/ +autoreply define ioam_disable +{ + u32 client_index; + u32 context; + u16 id; +}; + /* * Local Variables: * eval: (c-set-style "gnu") |