summaryrefslogtreecommitdiffstats
path: root/src/vppinfra/flowhash_template.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/vppinfra/flowhash_template.h')
-rw-r--r--src/vppinfra/flowhash_template.h597
1 files changed, 597 insertions, 0 deletions
diff --git a/src/vppinfra/flowhash_template.h b/src/vppinfra/flowhash_template.h
new file mode 100644
index 00000000000..8f8fef2c495
--- /dev/null
+++ b/src/vppinfra/flowhash_template.h
@@ -0,0 +1,597 @@
+/*
+ * Copyright (c) 2012 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Author: Pierre Pfister <ppfister@cisco.com>
+ *
+ * DISCLAIMER !
+ *
+ * This most likely is not the hash table you are looking for !!
+ *
+ * This structure targets a very specific and quite narrow set of use-cases
+ * that are not covered by other hash tables.
+ *
+ * Read the following text carefully, or ask the author or one of VPP's
+ * committers to make sure this is what you are looking for.
+ *
+ *
+ * -- Abstract:
+ * This hash table intends to provide a very fast lookup and insertion of
+ * key-value pairs for flow tables (although it might be used for other
+ * purposes), with additional support for lazy-timeouts.
+ * In particular, it was designed to minimize blocking reads, register usage and
+ * cache-lines accesses during a typical lookup.
+ * This hash table therefore provides stateful packet processing
+ * without performance degradation even when every single lookup has to fetch
+ * memory from RAM.
+ * This hash table is not thread-safe and requires executing a garbage
+ * collection function to clean-up chained buckets.
+ *
+ * -- Overview:
+ *
+ * One first aspect of this hash table is that it is self-contained in a single
+ * bulk of memory. Each entry contains a key, a value, and a 32 bits timeout
+ * value; occupies a full and single cache line; and is identified by a unique
+ * 32 bits index. The entry index zero is reserved and used when an entry
+ * could not be found nor inserted. Which means it is not necessary to
+ * immediately check whether an insertion or lookup was successful before
+ * behaving accordingly. One can just keep doing business as usual and
+ * check for the error later.
+ *
+ * Each entry is associated with a timeout value (which unit or clock is up to
+ * the user of the hash table). An entry which timeout is strictly smaller
+ * than the current time is considered empty, whereas an entry which timeout is
+ * greater or equal to the current time contains a valid key-value pair.
+ *
+ * Hash table lookup and insertion are equivalent:
+ * - An entry index is always returned (possibly index 0 if no entry could be
+ * found nor created).
+ * - The returned entry always has its key set to the provided key.
+ * - Timeout value will be greater than the provided current time whenever a
+ * valid entry was found, strictly smaller otherwise. In particular, one can
+ * not differentiate between an entry which was just created, and an entry
+ * which already existed in the past but got timeouted in between.
+ *
+ * As mentioned earlier, entry index zero is used as an invalid entry which may
+ * be manipulated as a normal one. Entries which index go from 1 to
+ * N (where N is a power of 2) are used as direct buckets, each containing a
+ * single entry. In the absence of hash collision, a single entry which location
+ * can deterministically be determined from the key-hash and the hash table
+ * header is accessed (One single cache line, without indirection). This
+ * allows for efficient pre-fetching of the key-value for more than 95% of
+ * accesses.
+ *
+ * In order to handle hash collisions (i.e. when multiple keys
+ * end-up in the same bucket), entries which index are greater than N are
+ * grouped into M groups of 16 collision entries. Such groups are linked
+ * with regular entries whenever a collision needs to be handled.
+ * When looking up a key with a bucket where a collision occurred, unused bits
+ * from the key hash are used to select two entries (from the collision bucket)
+ * where the new entry might be inserted.
+ *
+ * Once an entry is inserted, it will never be moved as long as the entry
+ * timeout value remains greater or equal to the provided current time value.
+ * The entry index can therefore be stored in other data structure as a way
+ * to bypass the hash lookup. But when doing so, one should check if the
+ * present key is the actual looked-up key.
+ *
+ * -- Garbage Collection:
+ *
+ * Since there is no explicit element removal, a garbage collector mechanism
+ * is required in order to remove buckets used for hash collisions. This
+ * is done by calling the flowhash_gc function on a regular basis. Each call
+ * to this function examines a single fixed entry. It shall therefore be called
+ * as many times as there are fixed entries in the hash table in order to
+ * ensure a full inspection.
+ *
+ * -- Time and timeout mechanism:
+ *
+ * The hash table makes use of a time value between in [1, 2^32 - 1].
+ * The provided time value shall keep increasing, and looping is not handled.
+ * When seconds are used, the system should run for 136 years without any issue.
+ * If milliseconds are used, a shift should be operated on all timeout values
+ * on a regular basis (more than every 49 days).
+ */
+
+#ifndef __included_flowhash_template_h__
+#define __included_flowhash_template_h__
+
+#include <vppinfra/clib.h>
+#include <vppinfra/mem.h>
+#include <vppinfra/cache.h>
+
+#ifndef FLOWHASH_TYPE
+#error FLOWHASH_TYPE not defined
+#endif
+
+#define _fv(a,b) a##b
+#define __fv(a,b) _fv(a,b)
+#define FV(a) __fv(a,FLOWHASH_TYPE)
+
+#define _fvt(a,b) a##b##_t
+#define __fvt(a,b) _fvt(a,b)
+#define FVT(a) __fvt(a,FLOWHASH_TYPE)
+
+/* Same for all flowhash variants */
+#ifndef __included_flowhash_common__
+
+#define FLOWHASH_INVALID_ENTRY_INDEX 0
+
+#define FLOWHASH_ENTRIES_PER_BUCKETS_LOG 4
+#define FLOWHASH_ENTRIES_PER_BUCKETS (1 << FLOWHASH_ENTRIES_PER_BUCKETS_LOG)
+
+#endif /* ifndef __included_flowhash_common__ */
+
+ /**
+ * @brief Compare a stored key with a lookup key.
+ *
+ * This function must be defined to use this template. It must return 0
+ * when the two keys are identical, and a different value otherwise.
+ */
+static_always_inline
+u8 FV(flowhash_cmp_key)(FVT(flowhash_skey) *a, FVT(flowhash_lkey) *b);
+
+ /**
+ * @brief Hash a lookup key into a 32 bit integer.
+ *
+ * This function must be defined to use this template.
+ * It must provides close to 32 bits of entropy distributed amongst
+ * all 32 bits of the provided value.
+ * Keys that are equal must have the same hash.
+ */
+ static_always_inline
+ u32 FV(flowhash_hash)(FVT(flowhash_lkey) *k);
+
+/**
+ * @brief Copy a lookup key into a destination stored key.
+ *
+ * This function must be defined to use this template. It must modify the dst
+ * key such that a later call to flowhash_cmp_key with the same arguments
+ * would return 0.
+ */
+static_always_inline
+void FV(flowhash_cpy_key)(FVT(flowhash_skey) *dst, FVT(flowhash_lkey) *src);
+
+/**
+ * @brief One flow hash entry used for both direct buckets and collision
+ * buckets.
+ */
+typedef struct {
+ /* Each entry is cache-line aligned. */
+ CLIB_CACHE_LINE_ALIGN_MARK (cacheline0);
+
+ /* Key is first to take advantage of alignment. */
+ FVT(flowhash_skey) key;
+
+ /* Entry value. */
+ FVT(flowhash_value) value;
+
+ /* Timeout value */
+ u32 timeout;
+
+ /* Entry index to the chained bucket. */
+ u32 chained_entry_index;
+} FVT(flowhash_entry);
+
+typedef struct FVT(__flowhash_struct) {
+ /* Cache aligned to simplify allocation. */
+ CLIB_CACHE_LINE_ALIGN_MARK (cacheline0);
+
+ /* Array going downward containing free bucket indices */
+ u32 free_buckets_indices[0];
+
+ /* Negative index of the first free bucket */
+ i32 free_buckets_position;
+
+ /* Number of fixed buckets minus one */
+ u32 fixed_entries_mask;
+
+ /* Allocated pointer for this hash table */
+ void *mem;
+
+ u32 collision_buckets_mask;
+ u32 total_entries;
+
+ u64 not_enough_buckets_counter;
+ u64 collision_lookup_counter;
+ u64 garbage_collection_counter;
+
+ u32 gc_counter;
+
+ /* Entry array containing:
+ * - 1 Dummy entry for error return
+ * - (buckets_mask + 1) Fixed buckets
+ * - chained_buckets Chained Buckets
+ */
+ FVT(flowhash_entry) entries[0];
+} FVT(flowhash);
+
+/* Same for all flowhash variants */
+#ifndef __included_flowhash_common__
+#define __included_flowhash_common__
+
+/**
+ * @brief Test whether a returned entry index corresponds to an overflow event.
+ */
+#define flowhash_is_overflow(ei) \
+ ((ei) == FLOWHASH_INVALID_ENTRY_INDEX)
+
+/**
+ * @brief Iterate over all entries in the hash table.
+ *
+ * Iterate over all entries in the hash table, not including the first invalid
+ * entry (at index 0), but including all chained hash collision buckets.
+ *
+ */
+#define flowhash_foreach_entry(h, ei) \
+ for (ei = 1; \
+ ei < (h)->total_entries; \
+ ei++)
+
+/**
+ * @brief Iterate over all currently valid entries.
+ *
+ * Iterate over all entries in the hash table which timeout value is greater
+ * or equal to the current time.
+ */
+#define flowhash_foreach_valid_entry(h, ei, now) \
+ flowhash_foreach_entry(h, ei) \
+ if (((now) <= (h)->entries[ei].timeout))
+
+/**
+ * @brief Timeout variable from a given entry.
+ */
+#define flowhash_timeout(h, ei) (h)->entries[ei].timeout
+
+/**
+ * @brief Indicates whether the entry is being used.
+ */
+#define flowhash_is_timeouted(h, ei, time_now) \
+ ((time_now) > flowhash_timeout(h, ei))
+
+/**
+ * @brief Get the key from the entry index, casted to the provided type.
+ */
+#define flowhash_key(h, ei) (&(h)->entries[ei].key)
+
+/**
+ * @brief Get the value from the entry index, casted to the provided type.
+ */
+#define flowhash_value(h, ei) (&(h)->entries[ei].value)
+
+/**
+ * @brief Get the number of octets allocated to this structure.
+ */
+#define flowhash_memory_size(h) clib_mem_size((h)->mem)
+
+/**
+ * @brief Test whether the entry index is in hash table boundaries.
+ */
+#define flowhash_is_valid_entry_index(h, ei) (ei < (h)->total_entries)
+
+/**
+ * @brief Adjust, if necessary, provided parameters such as being valid flowhash
+ * sizes.
+ */
+static
+void flowhash_validate_sizes(u32 *fixed_entries, u32 *collision_buckets)
+{
+ /* Find power of two greater or equal to the provided value */
+ if (*fixed_entries < FLOWHASH_ENTRIES_PER_BUCKETS)
+ *fixed_entries = FLOWHASH_ENTRIES_PER_BUCKETS;
+ if (*fixed_entries > (1 << (32 - FLOWHASH_ENTRIES_PER_BUCKETS_LOG)))
+ *fixed_entries = (1 << (32 - FLOWHASH_ENTRIES_PER_BUCKETS_LOG));
+
+ *fixed_entries -= 1;
+ *fixed_entries |= *fixed_entries >> 16;
+ *fixed_entries |= *fixed_entries >> 8;
+ *fixed_entries |= *fixed_entries >> 4;
+ *fixed_entries |= *fixed_entries >> 2;
+ *fixed_entries |= *fixed_entries >> 1;
+ *fixed_entries += 1;
+
+ if (*collision_buckets != 0)
+ {
+ if (*collision_buckets < CLIB_CACHE_LINE_BYTES/sizeof(u32))
+ *collision_buckets = CLIB_CACHE_LINE_BYTES/sizeof(u32);
+
+ *collision_buckets -= 1;
+ *collision_buckets |= *collision_buckets >> 16;
+ *collision_buckets |= *collision_buckets >> 8;
+ *collision_buckets |= *collision_buckets >> 4;
+ *collision_buckets |= *collision_buckets >> 2;
+ *collision_buckets |= *collision_buckets >> 1;
+ *collision_buckets += 1;
+ }
+}
+
+/**
+ * @brief Prefetch the the hash entry bucket.
+ *
+ * This should be performed approximately 200-300 cycles before lookup
+ * if the table is located in RAM. Or 30-40 cycles before lookup
+ * in case the table is located in L3.
+ */
+#define flowhash_prefetch(h, hash) \
+ CLIB_PREFETCH (&(h)->entries[((hash) & (h)->fixed_entries_mask) + 1], \
+ sizeof((h)->entries[0]), LOAD)
+
+#endif /* ifndef __included_flowhash_common__ */
+
+/**
+ * @brief Allocate a flowhash structure.
+ *
+ * @param[in] fixed_entries The number of fixed entries in the hash table.
+ * @param[in] chained_buckets The number of chained buckets.
+ *
+ * fixed_entries and chained_buckets parameters may not be used as is but
+ * modified in order to fit requirements.
+ *
+ * Since the flowhash does not support dynamic resizing, it is fairly
+ * important to choose the parameters carefully. In particular the performance
+ * gain from using this structure comes from an efficient lookup in the
+ * absence of hash collision.
+ * As a rule of thumbs, if the number of active entries (flows) is M,
+ * there should be about 16*M fixed entries, and M/16 collision buckets.
+ * Which represents 17*M allocated entries.
+ *
+ * For example:
+ * M = 2^20 total_size ~= 1GiB collision ~= 3%
+ * M = 2^18 total_size ~= 250MiB collision ~= 3%
+ * M = 2^10 total_size ~= 1MiB collision ~= 6%
+ *
+ */
+static_always_inline
+FVT(flowhash) *FV(flowhash_alloc)(u32 fixed_entries, u32 collision_buckets)
+{
+ FVT(flowhash) *h;
+ u32 size;
+ void *mem;
+ u32 entries;
+
+ flowhash_validate_sizes(&fixed_entries, &collision_buckets);
+
+ entries = 1 + fixed_entries +
+ collision_buckets * FLOWHASH_ENTRIES_PER_BUCKETS;
+ size = sizeof(*h) + sizeof(h->entries[0]) * entries +
+ sizeof(h->free_buckets_indices[0]) * collision_buckets;
+
+ mem = clib_mem_alloc_aligned(size, CLIB_CACHE_LINE_BYTES);
+ h = mem + collision_buckets * sizeof(h->free_buckets_indices[0]);
+ h->mem = mem;
+
+ /* Fill free elements list */
+ int i;
+ for (i = 1; i <= collision_buckets; i++)
+ {
+ h->free_buckets_indices[-i] =
+ entries - i * FLOWHASH_ENTRIES_PER_BUCKETS;
+ }
+
+ /* Init buckets */
+ for (i=0; i < entries; i++)
+ {
+ h->entries[i].chained_entry_index = FLOWHASH_INVALID_ENTRY_INDEX;
+ h->entries[i].timeout = 0;
+ }
+
+ h->free_buckets_position = -collision_buckets;
+ h->fixed_entries_mask = fixed_entries - 1;
+ h->collision_buckets_mask = collision_buckets - 1;
+ h->total_entries = entries;
+ h->not_enough_buckets_counter = 0;
+ h->collision_lookup_counter = 0;
+ h->garbage_collection_counter = 0;
+ h->gc_counter = 0;
+
+ return h;
+}
+
+/**
+ * @brief Free the flow hash memory.
+ */
+static_always_inline
+void FV(flowhash_free)(FVT(flowhash) *h)
+{
+ clib_mem_free(h->mem);
+}
+
+static void
+FV(__flowhash_get_chained) (FVT(flowhash) *h, FVT(flowhash_lkey) *k,
+ u32 hash, u32 time_now, u32 *ei);
+
+/**
+ * @brief Retrieves an entry index corresponding to a provided key and its hash.
+ *
+ * @param h The hash table pointer.
+ * @param k[in] A pointer to the key value.
+ * @param hash[in] The hash of the key.
+ * @param time_now[in] The current time.
+ * @param ei[out] A pointer set to the found entry index.
+ *
+ * This function always sets ei value to a valid entry index which can then be
+ * used to access the stored value as well as get or set its associated timeout.
+ * The key stored in the returned entry is always set to the provided key.
+ *
+ * In case the provided key is not found, and no entry could be created
+ * (either because there is no hash collision bucket available or
+ * the candidate entries in the collision bucket were already used), ei is
+ * set to the special value FLOWHASH_INVALID_ENTRY_INDEX (which can be tested
+ * with the flowhash_is_overflow macro).
+ *
+ * The timeout value is never modified during a lookup.
+ * - Use the flowhash_is_timeouted macro to test whether the returned entry
+ * was already valid, or is proposed for insertion.
+ * - Use the flowhash_timeout macro to get and set the entry timeout value.
+ *
+ */
+static_always_inline
+void FV(flowhash_get) (FVT(flowhash) *h, FVT(flowhash_lkey) *k,
+ u32 hash, u32 time_now, u32 *ei)
+{
+ *ei = (hash & h->fixed_entries_mask) + 1;
+
+ if (PREDICT_FALSE(FV(flowhash_cmp_key)(&h->entries[*ei].key, k) != 0))
+ {
+ if (PREDICT_TRUE(time_now > h->entries[*ei].timeout &&
+ (h->entries[*ei].chained_entry_index ==
+ FLOWHASH_INVALID_ENTRY_INDEX)))
+ {
+ FV(flowhash_cpy_key)(&h->entries[*ei].key, k);
+ }
+ else
+ {
+ FV(__flowhash_get_chained)(h, k, hash, time_now, ei);
+ }
+ }
+}
+
+static_always_inline void
+FV(__flowhash_get_chained) (FVT(flowhash) *h, FVT(flowhash_lkey) *k,
+ u32 hash, u32 time_now, u32 *ei)
+{
+ h->collision_lookup_counter++;
+
+ if (h->entries[*ei].chained_entry_index == FLOWHASH_INVALID_ENTRY_INDEX)
+ {
+ /* No chained entry yet. Let's chain one. */
+ if (h->free_buckets_position == 0)
+ {
+ /* Oops. No more buckets available. */
+ h->not_enough_buckets_counter++;
+ *ei = FLOWHASH_INVALID_ENTRY_INDEX;
+ h->entries[FLOWHASH_INVALID_ENTRY_INDEX].timeout =
+ time_now - 1;
+ FV(flowhash_cpy_key)(
+ &h->entries[FLOWHASH_INVALID_ENTRY_INDEX].key, k);
+ return;
+ }
+
+ /* Forward link */
+ h->entries[*ei].chained_entry_index =
+ h->free_buckets_indices[h->free_buckets_position];
+
+ /* Backward link (for garbage collection) */
+ h->entries[h->free_buckets_indices[h->free_buckets_position]].
+ chained_entry_index = *ei;
+
+ /* Move pointer */
+ h->free_buckets_position++;
+ }
+
+ /* Get the two indexes where to look at. */
+ u32 bi0 = h->entries[*ei].chained_entry_index +
+ (hash >> (32 - FLOWHASH_ENTRIES_PER_BUCKETS_LOG));
+ u32 bi1 = bi0 + 1;
+ bi1 = (bi0 & (FLOWHASH_ENTRIES_PER_BUCKETS - 1)) ? bi1 :
+ bi1 - FLOWHASH_ENTRIES_PER_BUCKETS;
+
+ /* It is possible that we wait while comparing bi0 key.
+ * It's better to prefetch bi1 so we don't wait twice. */
+ CLIB_PREFETCH(&h->entries[bi1], sizeof (h->entries[0]), READ);
+
+ if (FV(flowhash_cmp_key)(&h->entries[bi0].key, k) == 0)
+ {
+ *ei = bi0;
+ return;
+ }
+
+ if (FV(flowhash_cmp_key)(&h->entries[bi1].key, k) == 0)
+ {
+ *ei = bi1;
+ return;
+ }
+
+ if (h->entries[*ei].timeout >= time_now)
+ {
+ *ei = FLOWHASH_INVALID_ENTRY_INDEX;
+ *ei = (time_now > h->entries[bi0].timeout) ? bi0 : *ei;
+ *ei = (time_now > h->entries[bi1].timeout) ? bi1 : *ei;
+ }
+
+ FV(flowhash_cpy_key)(&h->entries[*ei].key, k);
+}
+
+static_always_inline void
+FV(flowhash_gc)(FVT(flowhash) *h, u32 time_now)
+{
+ u32 ei;
+ if (PREDICT_FALSE(h->collision_buckets_mask == (((u32)0) - 1)))
+ return;
+
+ /* prefetch two rounds in advance */
+ ei = 2 + h->fixed_entries_mask +
+ ((h->gc_counter + 2) & h->collision_buckets_mask) *
+ FLOWHASH_ENTRIES_PER_BUCKETS;
+ CLIB_PREFETCH(&h->entries[ei], sizeof (h->entries[0]), READ);
+
+ /* prefetch one round in advance */
+ ei = 2 + h->fixed_entries_mask +
+ ((h->gc_counter + 1) & h->collision_buckets_mask) *
+ FLOWHASH_ENTRIES_PER_BUCKETS;
+ if (h->entries[ei].chained_entry_index != FLOWHASH_INVALID_ENTRY_INDEX)
+ {
+ CLIB_PREFETCH(&h->entries[ei], 4 * CLIB_CACHE_LINE_BYTES, READ);
+ }
+
+ /* do GC */
+ ei = 2 + h->fixed_entries_mask +
+ ((h->gc_counter) & h->collision_buckets_mask) *
+ FLOWHASH_ENTRIES_PER_BUCKETS;
+ if (h->entries[ei].chained_entry_index != FLOWHASH_INVALID_ENTRY_INDEX)
+ {
+ u8 found = 0;
+ int i;
+ for (i=0; i<FLOWHASH_ENTRIES_PER_BUCKETS; i++)
+ {
+ if (time_now <= h->entries[ei + i].timeout)
+ {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ {
+ /* The bucket is not used. Let's free it. */
+ h->free_buckets_position--;
+ /* Reset forward link */
+ h->entries[h->entries[ei].chained_entry_index].chained_entry_index =
+ FLOWHASH_INVALID_ENTRY_INDEX;
+ /* Reset back link */
+ h->entries[ei].chained_entry_index = FLOWHASH_INVALID_ENTRY_INDEX;
+ /* Free element */
+ h->free_buckets_indices[h->free_buckets_position] = ei;
+ /* Count the garbage collection event */
+ h->garbage_collection_counter++;
+ }
+ }
+
+ h->gc_counter++;
+}
+
+static_always_inline
+u32 FV(flowhash_elts)(FVT(flowhash) *h, u32 time_now)
+{
+ u32 tot = 0;
+ u32 ei;
+
+ flowhash_foreach_valid_entry(h, ei, time_now)
+ tot++;
+
+ return tot;
+}
+
+#endif /* __included_flowhash_template_h__ */