diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/plugins/snat/nat64_cli.c | 138 | ||||
| -rw-r--r-- | src/plugins/snat/nat64_doc.md | 73 |
2 files changed, 211 insertions, 0 deletions
diff --git a/src/plugins/snat/nat64_cli.c b/src/plugins/snat/nat64_cli.c index 25345cd818d..32f671d5c64 100644 --- a/src/plugins/snat/nat64_cli.c +++ b/src/plugins/snat/nat64_cli.c @@ -713,6 +713,18 @@ nat64_show_prefix_command_fn (vlib_main_t * vm, unformat_input_t * input, /* *INDENT-OFF* */ +/*? + * @cliexpar + * @cliexstart{nat64 add pool address} + * Add/delete NAT64 pool address. + * To add single NAT64 pool address use: + * vpp# nat64 add pool address 10.1.1.10 + * To add NAT64 pool address range use: + * vpp# nat64 add pool address 10.1.1.2 - 10.1.1.5 + * To add NAT64 pool address for specific tenant use: + * vpp# nat64 add pool address 10.1.1.100 tenant-vrf 100 + * @cliexend +?*/ VLIB_CLI_COMMAND (nat64_add_pool_address_command, static) = { .path = "nat64 add pool address", .short_help = "nat64 add pool address <ip4-range-start> [- <ip4-range-end>] " @@ -720,24 +732,64 @@ VLIB_CLI_COMMAND (nat64_add_pool_address_command, static) = { .function = nat64_add_del_pool_addr_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 pool} + * Show NAT64 pool. + * vpp# show nat64 pool + * NAT64 pool: + * 10.1.1.3 tenant VRF: 0 + * 10.1.1.10 tenant VRF: 10 + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_pool_command, static) = { .path = "show nat64 pool", .short_help = "show nat64 pool", .function = nat64_show_pool_command_fn, }; +/*? + * @cliexpar + * @cliexstart{set interface nat64} + * Enable/disable NAT64 feature on the interface. + * To enable NAT64 feature with local (IPv6) network interface + * GigabitEthernet0/8/0 and external (IPv4) network interface + * GigabitEthernet0/a/0 use: + * vpp# set interface nat64 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0 + * @cliexend +?*/ VLIB_CLI_COMMAND (set_interface_nat64_command, static) = { .path = "set interface nat64", .short_help = "set interface nat64 in|out <intfc> [del]", .function = nat64_interface_feature_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 interfaces} + * Show interfaces with NAT64 feature. + * To show interfaces with NAT64 feature use: + * vpp# show nat64 interfaces + * NAT64 interfaces: + * GigabitEthernet0/8/0 in + * GigabitEthernet0/a/0 out + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_interfaces_command, static) = { .path = "show nat64 interfaces", .short_help = "show nat64 interfaces", .function = nat64_show_interfaces_command_fn, }; +/*? + * @cliexpar + * @cliexstart{nat64 add static bib} + * Add/delete NAT64 static BIB entry. + * To create NAT64 satatic BIB entry use: + * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp + * vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 + * @cliexend +?*/ VLIB_CLI_COMMAND (nat64_add_del_static_bib_command, static) = { .path = "nat64 add static bib", .short_help = "nat64 add static bib <ip6-addr> <port> <ip4-addr> <port> " @@ -745,12 +797,42 @@ VLIB_CLI_COMMAND (nat64_add_del_static_bib_command, static) = { .function = nat64_add_del_static_bib_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 bib} + * Show NAT64 BIB entries. + * To show NAT64 TCP BIB entries use: + * vpp# show nat64 bib tcp + * NAT64 tcp BIB: + * fd01:1::2 6303 10.0.0.3 62303 tcp vrf 0 dynamic 1 sessions + * 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp vrf 0 static 2 sessions + * To show NAT64 UDP BIB entries use: + * vpp# show nat64 bib udp + * NAT64 udp BIB: + * fd01:1::2 6304 10.0.0.3 10546 udp vrf 0 dynamic 10 sessions + * 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 static 0 sessions + * To show NAT64 ICMP BIB entries use: + * vpp# show nat64 bib icmp + * NAT64 icmp BIB: + * fd01:1::2 6305 10.0.0.3 63209 icmp vrf 10 dynamic 1 sessions + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_bib_command, static) = { .path = "show nat64 bib", .short_help = "show nat64 bib tcp|udp|icmp", .function = nat64_show_bib_command_fn, }; +/*? + * @cliexpar + * @cliexstart{set nat64 timeouts} + * Set NAT64 session timeouts (in seconds). + * To set NAT64 session timeoutes use use: + * vpp# set nat64 timeouts udp 200 icmp 30 tcp-trans 250 tcp-est 7450 + * To reset NAT64 session timeoutes to default values use: + * vpp# set nat64 timeouts reset + * @cliexend +?*/ VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = { .path = "set nat64 timeouts", .short_help = "set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> " @@ -758,18 +840,63 @@ VLIB_CLI_COMMAND (set_nat64_timeouts_command, static) = { .function = nat64_set_timeouts_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 tiemouts} + * Show NAT64 session timeouts: + * vpp# show nat64 tiemouts + * NAT64 session timeouts: + * UDP 300sec + * ICMP 60sec + * TCP transitory 240sec + * TCP established 7440sec + * TCP incoming SYN 6sec + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_timeouts_command, static) = { .path = "show nat64 tiemouts", .short_help = "show nat64 tiemouts", .function = nat64_show_timeouts_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 session table} + * Show NAT64 session table. + * To show NAT64 TCP session table use: + * vpp# show nat64 session table tcp + * NAT64 tcp session table: + * fd01:1::2 6303 64:ff9b::ac10:202 20 10.0.0.3 62303 172.16.2.2 20 tcp vrf 0 + * fd01:3::2 6303 64:ff9b::ac10:202 20 10.0.10.3 21300 172.16.2.2 20 tcp vrf 10 + * To show NAT64 UDP session table use: + * #vpp show nat64 session table udp + * NAT64 udp session table: + * fd01:1::2 6304 64:ff9b::ac10:202 20 10.0.0.3 10546 172.16.2.2 20 udp vrf 0 + * fd01:3::2 6304 64:ff9b::ac10:202 20 10.0.10.3 58627 172.16.2.2 20 udp vrf 10 + * fd01:1::2 1235 64:ff9b::a00:3 4023 10.0.0.3 24488 10.0.0.3 4023 udp vrf 0 + * fd01:1::3 23 64:ff9b::a00:3 24488 10.0.0.3 4023 10.0.0.3 24488 udp vrf 0 + * To show NAT64 ICMP session table use: + * #vpp show nat64 session table icmp + * NAT64 icmp session table: + * fd01:1::2 64:ff9b::ac10:202 6305 10.0.0.3 172.16.2.2 63209 icmp vrf 0 + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_st_command, static) = { .path = "show nat64 session table", .short_help = "show nat64 session table tcp|udp|icmp", .function = nat64_show_st_command_fn, }; +/*? + * @cliexpar + * @cliexstart{nat64 add prefix} + * Set NAT64 prefix for generating IPv6 representations of IPv4 addresses. + * To set NAT64 global prefix use: + * vpp# nat64 add prefix 2001:db8::/32 + * To set NAT64 prefix for specific tenant use: + * vpp# nat64 add prefix 2001:db8:122:300::/56 tenant-vrf 10 + * @cliexend +?*/ VLIB_CLI_COMMAND (nat64_add_del_prefix_command, static) = { .path = "nat64 add prefix", .short_help = "nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] " @@ -777,6 +904,17 @@ VLIB_CLI_COMMAND (nat64_add_del_prefix_command, static) = { .function = nat64_add_del_prefix_command_fn, }; +/*? + * @cliexpar + * @cliexstart{show nat64 prefix} + * Show NAT64 prefix. + * To show NAT64 prefix use: + * vpp# show nat64 prefix + * NAT64 prefix: + * 2001:db8::/32 tenant-vrf 0 + * 2001:db8:122:300::/56 tenant-vrf 10 + * @cliexend +?*/ VLIB_CLI_COMMAND (show_nat64_prefix_command, static) = { .path = "show nat64 prefix", .short_help = "show nat64 prefix", diff --git a/src/plugins/snat/nat64_doc.md b/src/plugins/snat/nat64_doc.md new file mode 100644 index 00000000000..f94467dade1 --- /dev/null +++ b/src/plugins/snat/nat64_doc.md @@ -0,0 +1,73 @@ +# Stateful NAT64: Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers {#nat64_doc} + +## Introduction + +Stateful NAT64 in VPP allows IPv6-only clients to contact IPv4 servers using unicast UDP, TCP, or ICMP based on RFC 6146. + +## Configuration + +### Enable/disable NAT64 feature on the interface + +> set interface nat64 in|out <intfc> [del] + +in: inside/local/IPv6 network +out: outside/external/IPv4 network +intfc: interface name + +### Add/delete NAT64 pool address + +One or more public IPv4 addresses assigned to a NAT64 are shared among several IPv6-only clients. + +> nat64 add pool address <ip4-range-start> [- <ip4-range-end>] [tenant-vrf <tenant-vrf-id>] [del] + +ip4-range-start: First IPv4 address of the range +ip4-range-end: Last IPv4 address of the range (optional, not used for single address) +tenant-vrf-id: VRF id of the tenant associated with the pool address (optional, if not set pool address is global) + +### Add/delete static BIB entry + +Stateful NAT64 also supports IPv4-initiated communications to a subset of the IPv6 hosts through staticaly configured bindings. + +> nat64 add static bib <ip6-addr> <in-port> <ip4-addr> <out-port> tcp|udp|icmp [vfr <table-id>] [del] + +ip6-addr: inside IPv6 address of the host +in-port: inside port or ICMPv6 identifier +ip4-addr: outside IPv4 address of the host +out-port: outside port or ICMPv4 identifier +table-id: VRF id of the tenant associated with the BIB entry (optional, default use global VRF) + +### Set NAT64 session timeouts + +Session is deleted when timer expires. If all sessions corresponding to a dynamically create BIB entry are deleted, then the BIB entry is also deleted. When packets are flowing sessiom timer is refreshed to keep the session alive. + +> set nat64 timeouts udp <sec> icmp <sec> tcp-trans <sec> tcp-est <sec> tcp-incoming-syn <sec> | reset + +udp: UDP session timeout value (default 300sec) +icmp: ICMP session timeout value (default 60sec) +tcp-trans: transitory TCP session timeout value (default 240sec) +tcp-est: established TCP session timeout value (default 7440sec) +tcp-incoming-syn: incoming SYN TCP session timeout value (default 6sec) +reset: reset timers to default values + +### Set NAT64 prefix + +Stateful NAT64 support the algorithm for generating IPv6 representations of IPv4 addresses defined in RFC 6052. If no prefix is configured, Well-Known Prefix (64:ff9b::/96) is used. + +> nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] [del] + +ip6-prefix: IPv6 prefix +plen: prefix length (valid values: 32, 40, 48, 56, 64, or 96) +tenant-vrf: VRF id of the tenant associated with the prefix + +### Show commands + +> show nat64 pool +> show nat64 interfaces +> show nat64 bib tcp|udp|icmp +> show nat64 session table tcp|udp|icmp +> show nat64 tiemouts +> show nat64 prefix + +## Notes + +Multi thread is not supported yet (CLI/API commands are disabled when VPP runs with multiple threads). |