diff options
Diffstat (limited to 'test/asf/test_ipsec_spd_flow_cache_input.py')
| -rw-r--r-- | test/asf/test_ipsec_spd_flow_cache_input.py | 866 |
1 files changed, 866 insertions, 0 deletions
diff --git a/test/asf/test_ipsec_spd_flow_cache_input.py b/test/asf/test_ipsec_spd_flow_cache_input.py new file mode 100644 index 00000000000..bab130dfa18 --- /dev/null +++ b/test/asf/test_ipsec_spd_flow_cache_input.py @@ -0,0 +1,866 @@ +from os import remove +import socket +import unittest + +from util import ppp +from asfframework import VppTestRunner +from template_ipsec import SpdFlowCacheTemplate + + +class SpdFlowCacheInbound(SpdFlowCacheTemplate): + # Override setUpConstants to enable inbound flow cache in config + @classmethod + def setUpConstants(cls): + super(SpdFlowCacheInbound, cls).setUpConstants() + cls.vpp_cmdline.extend(["ipsec", "{", "ipv4-inbound-spd-flow-cache on", "}"]) + cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline)) + + +class IPSec4SpdTestCaseBypass(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (add bypass)""" + + def test_ipsec_spd_inbound_bypass(self): + # In this test case, packets in IPv4 FWD path are configured + # to go through IPSec inbound SPD policy lookup. + # + # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. + # - High priority rule action is set to DISCARD. + # - Low priority rule action is set to BYPASS. + # + # Since BYPASS rules take precedence over DISCARD + # (the order being PROTECT, BYPASS, DISCARD) we expect the + # BYPASS rule to match and traffic to be correctly forwarded. + self.create_interfaces(2) + pkt_count = 5 + + self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) + + # create input rules + # bypass rule should take precedence over discard rule, + # even though it's lower priority + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + policy_1 = self.spd_add_rem_policy( # inbound, priority 15 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=15, + policy_type="discard", + ) + + # create output rule so we can capture forwarded packets + policy_2 = self.spd_add_rem_policy( # outbound, priority 10 + 1, + self.pg0, + self.pg1, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + ) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + # create the packet stream + packets = self.create_stream(self.pg0, self.pg1, pkt_count) + # add the stream to the source interface + self.pg0.add_stream(packets) + self.pg1.enable_capture() + self.pg_start() + + # check capture on pg1 + capture = self.pg1.get_capture() + for packet in capture: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + self.logger.debug("SPD: Num packets: %s", len(capture.res)) + + # verify captured packets + self.verify_capture(self.pg0, self.pg1, capture) + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(0, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # check input policy has been cached + self.verify_num_inbound_flow_cache_entries(1) + + +class IPSec4SpdTestCaseDiscard(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (add discard)""" + + def test_ipsec_spd_inbound_discard(self): + # In this test case, packets in IPv4 FWD path are configured + # to go through IPSec inbound SPD policy lookup. + # 1 DISCARD rule is added, so all traffic should be dropped. + self.create_interfaces(2) + pkt_count = 5 + + self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) + + # create input rule + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="discard", + ) + + # create output rule so we can capture forwarded packets + policy_1 = self.spd_add_rem_policy( # outbound, priority 10 + 1, + self.pg0, + self.pg1, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + ) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + # create the packet stream + packets = self.create_stream(self.pg0, self.pg1, pkt_count) + # add the stream to the source interface + self.pg0.add_stream(packets) + self.pg1.enable_capture() + self.pg_start() + # inbound discard rule should have dropped traffic + self.pg1.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(0, policy_1) + # only inbound discard rule should have been cached + self.verify_num_inbound_flow_cache_entries(1) + + +class IPSec4SpdTestCaseRemoveInbound(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (remove bypass)""" + + def test_ipsec_spd_inbound_remove(self): + # In this test case, packets in IPv4 FWD path are configured + # to go through IPSec inbound SPD policy lookup. + # + # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. + # - High priority rule action is set to DISCARD. + # - Low priority rule action is set to BYPASS. + # + # Since BYPASS rules take precedence over DISCARD + # (the order being PROTECT, BYPASS, DISCARD) we expect the + # BYPASS rule to match and traffic to be correctly forwarded. + # + # The BYPASS rules is then removed, and we check that all traffic + # is now correctly dropped. + self.create_interfaces(2) + pkt_count = 5 + + self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) + + # create input rules + # bypass rule should take precedence over discard rule, + # even though it's lower priority + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + policy_1 = self.spd_add_rem_policy( # inbound, priority 15 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=15, + policy_type="discard", + ) + + # create output rule so we can capture forwarded packets + policy_2 = self.spd_add_rem_policy( # outbound, priority 10 + 1, + self.pg0, + self.pg1, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + ) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + # create the packet stream + packets = self.create_stream(self.pg0, self.pg1, pkt_count) + # add the stream to the source interface + self.pg0.add_stream(packets) + self.pg1.enable_capture() + self.pg_start() + + # check capture on pg1 + capture = self.pg1.get_capture() + for packet in capture: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + self.logger.debug("SPD: Num packets: %s", len(capture.res)) + + # verify captured packets + self.verify_capture(self.pg0, self.pg1, capture) + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(0, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # check input policy has been cached + self.verify_num_inbound_flow_cache_entries(1) + + # remove the input bypass rule + self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + remove=True, + ) + # verify flow cache counter has been reset by rule removal + self.verify_num_inbound_flow_cache_entries(0) + + # resend the same packets + self.pg0.add_stream(packets) + self.pg1.enable_capture() # flush the old capture + self.pg_start() + + # inbound discard rule should have dropped traffic + self.pg1.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # by removing the bypass rule, we should have reset the flow cache + # we only expect the discard rule to now be in the flow cache + self.verify_num_inbound_flow_cache_entries(1) + + +class IPSec4SpdTestCaseReaddInbound(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (add, remove, re-add bypass)""" + + def test_ipsec_spd_inbound_readd(self): + # In this test case, packets in IPv4 FWD path are configured + # to go through IPSec inbound SPD policy lookup. + # + # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. + # - High priority rule action is set to DISCARD. + # - Low priority rule action is set to BYPASS. + # + # Since BYPASS rules take precedence over DISCARD + # (the order being PROTECT, BYPASS, DISCARD) we expect the + # BYPASS rule to match and traffic to be correctly forwarded. + # + # The BYPASS rules is then removed, and we check that all traffic + # is now correctly dropped. + # + # The BYPASS rule is then readded, checking traffic is not forwarded + # correctly again + self.create_interfaces(2) + pkt_count = 5 + + self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) + + # create input rules + # bypass rule should take precedence over discard rule, + # even though it's lower priority + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + policy_1 = self.spd_add_rem_policy( # inbound, priority 15 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=15, + policy_type="discard", + ) + + # create output rule so we can capture forwarded packets + policy_2 = self.spd_add_rem_policy( # outbound, priority 10 + 1, + self.pg0, + self.pg1, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + ) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + # create the packet stream + packets = self.create_stream(self.pg0, self.pg1, pkt_count) + # add the stream to the source interface + self.pg0.add_stream(packets) + self.pg1.enable_capture() + self.pg_start() + + # check capture on pg1 + capture = self.pg1.get_capture() + for packet in capture: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + self.logger.debug("SPD: Num packets: %s", len(capture.res)) + + # verify captured packets + self.verify_capture(self.pg0, self.pg1, capture) + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(0, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # check input policy has been cached + self.verify_num_inbound_flow_cache_entries(1) + + # remove the input bypass rule + self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + remove=True, + ) + # verify flow cache counter has been reset by rule removal + self.verify_num_inbound_flow_cache_entries(0) + + # resend the same packets + self.pg0.add_stream(packets) + self.pg1.enable_capture() # flush the old capture + self.pg_start() + + # inbound discard rule should have dropped traffic + self.pg1.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # by removing the bypass rule, flow cache was reset + # we only expect the discard rule to now be in the flow cache + self.verify_num_inbound_flow_cache_entries(1) + + # readd the input bypass rule + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # verify flow cache counter has been reset by rule addition + self.verify_num_inbound_flow_cache_entries(0) + + # resend the same packets + self.pg0.add_stream(packets) + self.pg1.enable_capture() # flush the old capture + self.pg_start() + + # check capture on pg1 + capture = self.pg1.get_capture() + for packet in capture: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + + # verify captured packets + self.verify_capture(self.pg0, self.pg1, capture) + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count * 2, policy_2) + # by readding the bypass rule, we reset the flow cache + # we only expect the bypass rule to now be in the flow cache + self.verify_num_inbound_flow_cache_entries(1) + + +class IPSec4SpdTestCaseMultipleInbound(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (multiple interfaces, multiple rules)""" + + def test_ipsec_spd_inbound_multiple(self): + # In this test case, packets in IPv4 FWD path are configured to go + # through IPSec outbound SPD policy lookup. + # + # Multiples rules on multiple interfaces are tested at the same time. + # 3x interfaces are configured, binding the same SPD to each. + # Each interface has 1 SPD rule- 2x BYPASS and 1x DISCARD + # + # Traffic should be forwarded with destinations pg1 & pg2 + # and dropped to pg0. + self.create_interfaces(3) + pkt_count = 5 + # bind SPD to all interfaces + self.spd_create_and_intf_add(1, self.pg_interfaces) + # add input rules on all interfaces + # pg0 -> pg1 + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # pg1 -> pg2 + policy_1 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg2, + self.pg1, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # pg2 -> pg0 + policy_2 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg0, + self.pg2, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="discard", + ) + + # create output rules covering the the full ip range + # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets + policy_3 = self.spd_add_rem_policy( # outbound, priority 10 + 1, + self.pg0, + self.pg0, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + all_ips=True, + ) + + # check flow cache is empty (0 active elements) before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + + # create the packet streams + packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) + packets1 = self.create_stream(self.pg1, self.pg2, pkt_count) + packets2 = self.create_stream(self.pg2, self.pg0, pkt_count) + # add the streams to the source interfaces + self.pg0.add_stream(packets0) + self.pg1.add_stream(packets1) + self.pg2.add_stream(packets2) + # enable capture on all interfaces + for pg in self.pg_interfaces: + pg.enable_capture() + # start the packet generator + self.pg_start() + + # get captures from ifs + if_caps = [] + for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 + if_caps.append(pg.get_capture()) + for packet in if_caps[-1]: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + + # verify captures that matched BYPASS rules + self.verify_capture(self.pg0, self.pg1, if_caps[0]) + self.verify_capture(self.pg1, self.pg2, if_caps[1]) + # verify that traffic to pg0 matched DISCARD rule and was dropped + self.pg0.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # check flow/policy match was cached for: 3x input policies + self.verify_num_inbound_flow_cache_entries(3) + + +class IPSec4SpdTestCaseOverwriteStaleInbound(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (overwrite stale entries)""" + + def test_ipsec_spd_inbound_overwrite(self): + # The operation of the flow cache is setup so that the entire cache + # is invalidated when adding or removing an SPD policy rule. + # For performance, old cache entries are not zero'd, but remain + # in the table as "stale" entries. If a flow matches a stale entry, + # and the epoch count does NOT match the current count, the entry + # is overwritten. + # In this test, 3 active rules are created and matched to enter + # them into the flow cache. + # A single entry is removed to invalidate the entire cache. + # We then readd the rule and test that overwriting of the previous + # stale entries occurs as expected, and that the flow cache entry + # counter is updated correctly. + self.create_interfaces(3) + pkt_count = 5 + # bind SPD to all interfaces + self.spd_create_and_intf_add(1, self.pg_interfaces) + # add input rules on all interfaces + # pg0 -> pg1 + policy_0 = self.spd_add_rem_policy( # inbound + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # pg1 -> pg2 + policy_1 = self.spd_add_rem_policy( # inbound + 1, + self.pg2, + self.pg1, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # pg2 -> pg0 + policy_2 = self.spd_add_rem_policy( # inbound + 1, + self.pg0, + self.pg2, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="discard", + ) + + # create output rules covering the the full ip range + # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets + policy_3 = self.spd_add_rem_policy( # outbound + 1, + self.pg0, + self.pg0, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + all_ips=True, + ) + + # check flow cache is empty (0 active elements) before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + + # create the packet streams + packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) + packets1 = self.create_stream(self.pg1, self.pg2, pkt_count) + packets2 = self.create_stream(self.pg2, self.pg0, pkt_count) + # add the streams to the source interfaces + self.pg0.add_stream(packets0) + self.pg1.add_stream(packets1) + self.pg2.add_stream(packets2) + # enable capture on all interfaces + for pg in self.pg_interfaces: + pg.enable_capture() + # start the packet generator + self.pg_start() + + # get captures from ifs + if_caps = [] + for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 + if_caps.append(pg.get_capture()) + for packet in if_caps[-1]: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + + # verify captures that matched BYPASS rules + self.verify_capture(self.pg0, self.pg1, if_caps[0]) + self.verify_capture(self.pg1, self.pg2, if_caps[1]) + # verify that traffic to pg0 matched DISCARD rule and was dropped + self.pg0.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count, policy_2) + # check flow/policy match was cached for: 3x input policies + self.verify_num_inbound_flow_cache_entries(3) + + # adding an outbound policy should not invalidate output flow cache + self.spd_add_rem_policy( # outbound + 1, + self.pg0, + self.pg0, + socket.IPPROTO_UDP, + is_out=1, + priority=1, + policy_type="bypass", + all_ips=True, + ) + # check inbound flow cache counter has not been reset + self.verify_num_inbound_flow_cache_entries(3) + + # remove + readd bypass policy - flow cache counter will be reset, + # and there will be 3x stale entries in flow cache + self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + remove=True, + ) + # readd policy + policy_0 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + # check counter was reset + self.verify_num_inbound_flow_cache_entries(0) + + # resend the same packets + self.pg0.add_stream(packets0) + self.pg1.add_stream(packets1) + self.pg2.add_stream(packets2) + for pg in self.pg_interfaces: + pg.enable_capture() # flush previous captures + self.pg_start() + + # get captures from ifs + if_caps = [] + for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 + if_caps.append(pg.get_capture()) + for packet in if_caps[-1]: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + + # verify captures that matched BYPASS rules + self.verify_capture(self.pg0, self.pg1, if_caps[0]) + self.verify_capture(self.pg1, self.pg2, if_caps[1]) + # verify that traffic to pg0 matched DISCARD rule and was dropped + self.pg0.assert_nothing_captured() + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_0) + self.verify_policy_match(pkt_count * 2, policy_1) + self.verify_policy_match(pkt_count * 2, policy_2) + # we are overwriting 3x stale entries - check flow cache counter + # is correct + self.verify_num_inbound_flow_cache_entries(3) + + +class IPSec4SpdTestCaseCollisionInbound(SpdFlowCacheInbound): + """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ + (hash collision)""" + + # Override class setup to restrict hash table size to 16 buckets. + # This forces using only the lower 4 bits of the hash as a key, + # making hash collisions easy to find. + @classmethod + def setUpConstants(cls): + super(SpdFlowCacheInbound, cls).setUpConstants() + cls.vpp_cmdline.extend( + [ + "ipsec", + "{", + "ipv4-inbound-spd-flow-cache on", + "ipv4-inbound-spd-hash-buckets 16", + "}", + ] + ) + cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline)) + + def test_ipsec_spd_inbound_collision(self): + # The flow cache operation is setup to overwrite an entry + # if a hash collision occurs. + # In this test, 2 packets are configured that result in a + # hash with the same lower 4 bits. + # After the first packet is received, there should be one + # active entry in the flow cache. + # After the second packet with the same lower 4 bit hash + # is received, this should overwrite the same entry. + # Therefore there will still be a total of one (1) entry, + # in the flow cache with two matching policies. + # crc32_supported() method is used to check cpu for crc32 + # intrinsic support for hashing. + # If crc32 is not supported, we fall back to clib_xxhash() + self.create_interfaces(4) + pkt_count = 5 + # bind SPD to all interfaces + self.spd_create_and_intf_add(1, self.pg_interfaces) + + # create output rules covering the the full ip range + # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets + policy_0 = self.spd_add_rem_policy( # outbound + 1, + self.pg0, + self.pg0, + socket.IPPROTO_UDP, + is_out=1, + priority=10, + policy_type="bypass", + all_ips=True, + ) + + capture_intfs = [] + if self.crc32_supported(): # create crc32 collision on last 4 bits + hashed_with_crc32 = True + # add matching rules + policy_1 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg2, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + policy_2 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg3, + self.pg0, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + + # we expect to get captures on pg1 + pg3 + capture_intfs.append(self.pg1) + capture_intfs.append(self.pg3) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + + # create the packet streams + # packet hashes to: + # ad727628 + packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 1) + # b5512898 + packets2 = self.create_stream(self.pg0, self.pg3, pkt_count, 1, 1) + # add the streams to the source interfaces + self.pg2.add_stream(packets1) + self.pg0.add_stream(packets2) + else: # create xxhash collision on last 4 bits + hashed_with_crc32 = False + # add matching rules + policy_1 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg1, + self.pg2, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + policy_2 = self.spd_add_rem_policy( # inbound, priority 10 + 1, + self.pg2, + self.pg3, + socket.IPPROTO_UDP, + is_out=0, + priority=10, + policy_type="bypass", + ) + + capture_intfs.append(self.pg1) + capture_intfs.append(self.pg2) + + # check flow cache is empty before sending traffic + self.verify_num_inbound_flow_cache_entries(0) + + # create the packet streams + # 2f8f90f557eef12c + packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 1) + # 6b7f9987719ffc1c + packets2 = self.create_stream(self.pg3, self.pg2, pkt_count, 1, 1) + # add the streams to the source interfaces + self.pg2.add_stream(packets1) + self.pg3.add_stream(packets2) + + # enable capture on interfaces we expect capture on & send pkts + for pg in capture_intfs: + pg.enable_capture() + self.pg_start() + + # get captures + if_caps = [] + for pg in capture_intfs: + if_caps.append(pg.get_capture()) + for packet in if_caps[-1]: + try: + self.logger.debug(ppp("SPD Add - Got packet:", packet)) + except Exception: + self.logger.error(ppp("Unexpected or invalid packet:", packet)) + raise + + # verify captures that matched BYPASS rule + if hashed_with_crc32: + self.verify_capture(self.pg2, self.pg1, if_caps[0]) + self.verify_capture(self.pg0, self.pg3, if_caps[1]) + else: # hashed with xxhash + self.verify_capture(self.pg2, self.pg1, if_caps[0]) + self.verify_capture(self.pg3, self.pg2, if_caps[1]) + + # verify all policies matched the expected number of times + self.verify_policy_match(pkt_count, policy_1) + self.verify_policy_match(pkt_count, policy_2) + self.verify_policy_match(pkt_count * 2, policy_0) # output policy + # we have matched 2 policies, but due to the hash collision + # one active entry is expected + self.verify_num_inbound_flow_cache_entries(1) + + +if __name__ == "__main__": + unittest.main(testRunner=VppTestRunner) |