aboutsummaryrefslogtreecommitdiffstats
path: root/test/doc/index.rst
diff options
context:
space:
mode:
Diffstat (limited to 'test/doc/index.rst')
-rw-r--r--test/doc/index.rst432
1 files changed, 5 insertions, 427 deletions
diff --git a/test/doc/index.rst b/test/doc/index.rst
index f51d5058afe..beb9be5f826 100644
--- a/test/doc/index.rst
+++ b/test/doc/index.rst
@@ -1,432 +1,10 @@
-.. _unittest: https://docs.python.org/2/library/unittest.html
-.. _TestCase: https://docs.python.org/2/library/unittest.html#unittest.TestCase
-.. _AssertionError: https://docs.python.org/2/library/exceptions.html#exceptions.AssertionError
-.. _SkipTest: https://docs.python.org/2/library/unittest.html#unittest.SkipTest
-.. _virtualenv: http://docs.python-guide.org/en/latest/dev/virtualenvs/
-.. _scapy: http://www.secdev.org/projects/scapy/
-.. _logging: https://docs.python.org/2/library/logging.html
-
-.. |vtf| replace:: VPP Test Framework
-
-|vtf|
-=====
-
-Overview
-########
-
-The goal of the |vtf| is to ease writing, running and debugging
-unit tests for the VPP. For this, python was chosen as a high level language
-allowing rapid development with scapy_ providing the necessary tool for creating
-and dissecting packets.
-
-Anatomy of a test case
-######################
-
-Python's unittest_ is used as the base framework upon which the VPP test
-framework is built. A test suite in the |vtf| consists of multiple classes
-derived from `VppTestCase`, which is itself derived from TestCase_.
-The test class defines one or more test functions, which act as test cases.
-
-Function flow when running a test case is:
-
-1. `setUpClass <VppTestCase.setUpClass>`:
- This function is called once for each test class, allowing a one-time test
- setup to be executed. If this functions throws an exception,
- none of the test functions are executed.
-2. `setUp <VppTestCase.setUp>`:
- The setUp function runs before each of the test functions. If this function
- throws an exception other than AssertionError_ or SkipTest_, then this is
- considered an error, not a test failure.
-3. *test_<name>*:
- This is the guts of the test case. It should execute the test scenario
- and use the various assert functions from the unittest framework to check
- necessary. Multiple test_<name> methods can exist in a test case.
-4. `tearDown <VppTestCase.tearDown>`:
- The tearDown function is called after each test function with the purpose
- of doing partial cleanup.
-5. `tearDownClass <VppTestCase.tearDownClass>`:
- Method called once after running all of the test functions to perform
- the final cleanup.
-
-Logging
-#######
-
-Each test case has a logger automatically created for it, stored in
-'logger' property, based on logging_. Use the logger's standard methods
-debug(), info(), error(), ... to emit log messages to the logger.
-
-All the log messages go always into a log file in temporary directory
-(see below).
-
-To control the messages printed to console, specify the V= parameter.
-
-.. code-block:: shell
-
- make test # minimum verbosity
- make test V=1 # moderate verbosity
- make test V=2 # maximum verbosity
-
-Test temporary directory and VPP life cycle
-###########################################
-
-Test separation is achieved by separating the test files and vpp instances.
-Each test creates a temporary directory and it's name is used to create
-a shared memory prefix which is used to run a VPP instance.
-The temporary directory name contains the testcase class name for easy
-reference, so for testcase named 'TestVxlan' the directory could be named
-e.g. vpp-unittest-TestVxlan-UNUP3j.
-This way, there is no conflict between any other VPP instances running
-on the box and the test VPP. Any temporary files created by the test case
-are stored in this temporary test directory.
-
-The test temporary directory holds the following interesting files:
-
-* log.txt - this contains the logger output on max verbosity
-* pg*_in.pcap - last injected packet stream into VPP, named after the interface,
- so for pg0, the file will be named pg0_in.pcap
-* pg*_out.pcap - last capture file created by VPP for interface, similarly,
- named after the interface, so for e.g. pg1, the file will be named
- pg1_out.pcap
-* history files - whenever the capture is restarted or a new stream is added,
- the existing files are rotated and renamed, soo all the pcap files
- are always saved for later debugging if needed
-* core - if vpp dumps a core, it'll be stored in the temporary directory
-* vpp_stdout.txt - file containing output which vpp printed to stdout
-* vpp_stderr.txt - file containing output which vpp printed to stderr
-
-*NOTE*: existing temporary directories named vpp-unittest-* are automatically
-removed when invoking 'make test*' or 'make retest*' to keep the temporary
-directory clean.
-
-Virtual environment
-###################
-
-Virtualenv_ is a python module which provides a means to create an environment
-containing the dependencies required by the |vtf|, allowing a separation
-from any existing system-wide packages. |vtf|'s Makefile automatically
-creates a virtualenv_ inside build-root and installs the required packages
-in that environment. The environment is entered whenever executing a test
-via one of the make test targets.
-
-Naming conventions
-##################
-
-Most unit tests do some kind of packet manipulation - sending and receiving
-packets between VPP and virtual hosts connected to the VPP. Referring
-to the sides, addresses, etc. is always done as if looking from the VPP side,
-thus:
-
-* *local_* prefix is used for the VPP side.
- So e.g. `local_ip4 <VppInterface.local_ip4>` address is the IPv4 address
- assigned to the VPP interface.
-* *remote_* prefix is used for the virtual host side.
- So e.g. `remote_mac <VppInterface.remote_mac>` address is the MAC address
- assigned to the virtual host connected to the VPP.
-
-Automatically generated addresses
-#################################
-
-To send packets, one needs to typically provide some addresses, otherwise
-the packets will be dropped. The interface objects in |vtf| automatically
-provide addresses based on (typically) their indexes, which ensures
-there are no conflicts and eases debugging by making the addressing scheme
-consistent.
-
-The developer of a test case typically doesn't need to work with the actual
-numbers, rather using the properties of the objects. The addresses typically
-come in two flavors: '<address>' and '<address>n' - note the 'n' suffix.
-The former address is a Python string, while the latter is translated using
-socket.inet_pton to raw format in network byte order - this format is suitable
-for passing as an argument to VPP APIs.
-
-e.g. for the IPv4 address assigned to the VPP interface:
-
-* local_ip4 - Local IPv4 address on VPP interface (string)
-* local_ip4n - Local IPv4 address - raw, suitable as API parameter.
-
-These addresses need to be configured in VPP to be usable using e.g.
-`config_ip4` API. Please see the documentation to `VppInterface` for more
-details.
-
-By default, there is one remote address of each kind created for L3:
-remote_ip4 and remote_ip6. If the test needs more addresses, because it's
-simulating more remote hosts, they can be generated using
-`generate_remote_hosts` API and the entries for them inserted into the ARP
-table using `configure_ipv4_neighbors` API.
-
-Packet flow in the |vtf|
-########################
-
-Test framework -> VPP
-~~~~~~~~~~~~~~~~~~~~~
-
-|vtf| doesn't send any packets to VPP directly. Traffic is instead injected
-using packet-generator interfaces, represented by the `VppPGInterface` class.
-Packets are written into a temporary .pcap file, which is then read by the VPP
-and the packets are injected into the VPP world.
-
-To add a list of packets to an interface, call the `add_stream` method on that
-interface. Once everything is prepared, call `pg_start` method to start
-the packet generator on the VPP side.
-
-VPP -> test framework
-~~~~~~~~~~~~~~~~~~~~~
-
-Similarly, VPP doesn't send any packets to |vtf| directly. Instead, packet
-capture feature is used to capture and write traffic to a temporary .pcap file,
-which is then read and analyzed by the |vtf|.
-
-The following APIs are available to the test case for reading pcap files.
-
-* `get_capture`: this API is suitable for bulk & batch style of test, where
- a list of packets is prepared & sent, then the received packets are read
- and verified. The API needs the number of packets which are expected to
- be captured (ignoring filtered packets - see below) to know when the pcap
- file is completely written by the VPP. If using packet infos for verifying
- packets, then the counts of the packet infos can be automatically used
- by `get_capture` to get the proper count (in this case the default value
- None can be supplied as expected_count or ommitted altogether).
-* `wait_for_packet`: this API is suitable for interactive style of test,
- e.g. when doing session management, three-way handsakes, etc. This API waits
- for and returns a single packet, keeping the capture file in place
- and remembering context. Repeated invocations return following packets
- (or raise Exception if timeout is reached) from the same capture file
- (= packets arriving on the same interface).
-
-*NOTE*: it is not recommended to mix these APIs unless you understand how they
-work internally. None of these APIs rotate the pcap capture file, so calling
-e.g. `get_capture` after `wait_for_packet` will return already read packets.
-It is safe to switch from one API to another after calling `enable_capture`
-as that API rotates the capture file.
-
-Automatic filtering of packets:
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Both APIs (`get_capture` and `wait_for_packet`) by default filter the packet
-capture, removing known uninteresting packets from it - these are IPv6 Router
-Advertisments and IPv6 Router Alerts. These packets are unsolicitated
-and from the point of |vtf| are random. If a test wants to receive these
-packets, it should specify either None or a custom filtering function
-as the value to the 'filter_out_fn' argument.
-
-Common API flow for sending/receiving packets:
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-We will describe a simple scenario, where packets are sent from pg0 to pg1
-interface, assuming that the interfaces were created using
-`create_pg_interfaces` API.
-
-1. Create a list of packets for pg0::
-
- packet_count = 10
- packets = create_packets(src=self.pg0, dst=self.pg1,
- count=packet_count)
-
-2. Add that list of packets to the source interface::
-
- self.pg0.add_stream(packets)
-
-3. Enable capture on the destination interface::
-
- self.pg1.enable_capture()
-
-4. Start the packet generator::
-
- self.pg_start()
-
-5. Wait for capture file to appear and read it::
-
- capture = self.pg1.get_capture(expected_count=packet_count)
-
-6. Verify packets match sent packets::
-
- self.verify_capture(send=packets, captured=capture)
-
-Test framework objects
-######################
-
-The following objects provide VPP abstraction and provide a means to do
-common tasks easily in the test cases.
-
-* `VppInterface`: abstract class representing generic VPP interface
- and contains some common functionality, which is then used by derived classes
-* `VppPGInterface`: class representing VPP packet-generator interface.
- The interface is created/destroyed when the object is created/destroyed.
-* `VppSubInterface`: VPP sub-interface abstract class, containing common
- functionality for e.g. `VppDot1QSubint` and `VppDot1ADSubint` classes
-
-How VPP APIs/CLIs are called
-############################
-
-Vpp provides python bindings in a python module called vpp-papi, which the test
-framework installs in the virtual environment. A shim layer represented by
-the `VppPapiProvider` class is built on top of the vpp-papi, serving these
-purposes:
-
-1. Automatic return value checks:
- After each API is called, the return value is checked against the expected
- return value (by default 0, but can be overridden) and an exception
- is raised if the check fails.
-2. Automatic call of hooks:
-
- a. `before_cli <Hook.before_cli>` and `before_api <Hook.before_api>` hooks
- are used for debug logging and stepping through the test
- b. `after_cli <Hook.after_cli>` and `after_api <Hook.after_api>` hooks
- are used for monitoring the vpp process for crashes
-3. Simplification of API calls:
- Many of the VPP APIs take a lot of parameters and by providing sane defaults
- for these, the API is much easier to use in the common case and the code is
- more readable. E.g. ip_add_del_route API takes ~25 parameters, of which
- in the common case, only 3 are needed.
-
-Utility methods
-###############
-
-Some interesting utility methods are:
-
-* `ppp`: 'Pretty Print Packet' - returns a string containing the same output
- as Scapy's packet.show() would print
-* `ppc`: 'Pretty Print Capture' - returns a string containing printout of
- a capture (with configurable limit on the number of packets printed from it)
- using `ppp`
-
-*NOTE*: Do not use Scapy's packet.show() in the tests, because it prints
-the output to stdout. All output should go to the logger associated with
-the test case.
-
-Example: how to add a new test
-##############################
-
-In this example, we will describe how to add a new test case which tests
-basic IPv4 forwarding.
-
-1. Add a new file called test_ip4_fwd.py in the test directory, starting
- with a few imports::
-
- from framework import VppTestCase
- from scapy.layers.l2 import Ether
- from scapy.packet import Raw
- from scapy.layers.inet import IP, UDP
- from random import randint
-
-2. Create a class inherited from the VppTestCase::
-
- class IP4FwdTestCase(VppTestCase):
- """ IPv4 simple forwarding test case """
-
-2. Add a setUpClass function containing the setup needed for our test to run::
-
- @classmethod
- def setUpClass(self):
- super(IP4FwdTestCase, self).setUpClass()
- self.create_pg_interfaces(range(2)) # create pg0 and pg1
- for i in self.pg_interfaces:
- i.admin_up() # put the interface up
- i.config_ip4() # configure IPv4 address on the interface
- i.resolve_arp() # resolve ARP, so that we know VPP MAC
-
-3. Create a helper method to create the packets to send::
-
- def create_stream(self, src_if, dst_if, count):
- packets = []
- for i in range(count):
- # create packet info stored in the test case instance
- info = self.create_packet_info(src_if, dst_if)
- # convert the info into packet payload
- payload = self.info_to_payload(info)
- # create the packet itself
- p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) /
- IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4) /
- UDP(sport=randint(1000, 2000), dport=5678) /
- Raw(payload))
- # store a copy of the packet in the packet info
- info.data = p.copy()
- # append the packet to the list
- packets.append(p)
-
- # return the created packet list
- return packets
-
-4. Create a helper method to verify the capture::
-
- def verify_capture(self, src_if, dst_if, capture):
- packet_info = None
- for packet in capture:
- try:
- ip = packet[IP]
- udp = packet[UDP]
- # convert the payload to packet info object
- payload_info = self.payload_to_info(str(packet[Raw]))
- # make sure the indexes match
- self.assert_equal(payload_info.src, src_if.sw_if_index,
- "source sw_if_index")
- self.assert_equal(payload_info.dst, dst_if.sw_if_index,
- "destination sw_if_index")
- packet_info = self.get_next_packet_info_for_interface2(
- src_if.sw_if_index,
- dst_if.sw_if_index,
- packet_info)
- # make sure we didn't run out of saved packets
- self.assertIsNotNone(packet_info)
- self.assert_equal(payload_info.index, packet_info.index,
- "packet info index")
- saved_packet = packet_info.data # fetch the saved packet
- # assert the values match
- self.assert_equal(ip.src, saved_packet[IP].src,
- "IP source address")
- # ... more assertions here
- self.assert_equal(udp.sport, saved_packet[UDP].sport,
- "UDP source port")
- except:
- self.logger.error(ppp("Unexpected or invalid packet:",
- packet))
- raise
- remaining_packet = self.get_next_packet_info_for_interface2(
- src_if.sw_if_index,
- dst_if.sw_if_index,
- packet_info)
- self.assertIsNone(remaining_packet,
- "Interface %s: Packet expected from interface "
- "%s didn't arrive" % (dst_if.name, src_if.name))
-
-5. Add the test code to test_basic function::
-
- def test_basic(self):
- count = 10
- # create the packet stream
- packets = self.create_stream(self.pg0, self.pg1, count)
- # add the stream to the source interface
- self.pg0.add_stream(packets)
- # enable capture on both interfaces
- self.pg0.enable_capture()
- self.pg1.enable_capture()
- # start the packet generator
- self.pg_start()
- # get capture - the proper count of packets was saved by
- # create_packet_info() based on dst_if parameter
- capture = self.pg1.get_capture()
- # assert nothing captured on pg0 (always do this last, so that
- # some time has already passed since pg_start())
- self.pg0.assert_nothing_captured()
- # verify capture
- self.verify_capture(self.pg0, self.pg1, capture)
-
-6. Run the test by issuing 'make test'.
-
-
-|vtf| module documentation
-##########################
+Contents
+========
.. toctree::
:maxdepth: 2
:glob:
- modules.rst
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
-
+ overview
+ modules
+ indices