summaryrefslogtreecommitdiffstats
path: root/test/doc/index.rst
diff options
context:
space:
mode:
Diffstat (limited to 'test/doc/index.rst')
-rw-r--r--test/doc/index.rst157
1 files changed, 150 insertions, 7 deletions
diff --git a/test/doc/index.rst b/test/doc/index.rst
index c18357a4860..323b608fdfb 100644
--- a/test/doc/index.rst
+++ b/test/doc/index.rst
@@ -1,15 +1,158 @@
-.. VPP test framework documentation master file, created by
- sphinx-quickstart on Thu Oct 13 08:45:03 2016.
- You can adapt this file completely to your liking, but it should at least
- contain the root `toctree` directive.
+.. _unittest: https://docs.python.org/2/library/unittest.html
+.. _TestCase: https://docs.python.org/2/library/unittest.html#unittest.TestCase
+.. _AssertionError: https://docs.python.org/2/library/exceptions.html#exceptions.AssertionError
+.. _SkipTest: https://docs.python.org/2/library/unittest.html#unittest.SkipTest
+.. _virtualenv: http://docs.python-guide.org/en/latest/dev/virtualenvs/
+.. _scapy: http://www.secdev.org/projects/scapy/
-Welcome to VPP test framework's documentation!
-==============================================
+.. |vtf| replace:: VPP Test Framework
-Contents:
+|vtf|
+=====
+Overview
+########
+
+The goal of the |vtf| is to ease writing, running and debugging
+unit tests for the VPP. For this, python was chosen as a high level language
+allowing rapid development with scapy_ providing the necessary tool for creating
+and dissecting packets.
+
+Anatomy of a test case
+######################
+
+Python's unittest_ is used as the base framework upon which the VPP test
+framework is built. A test suite in the |vtf| constists of multiple classes
+derived from `VppTestCase`, which is itself derived from TestCase_.
+The test class defines one or more test functions, which act as test cases.
+
+Function flow when running a test case is:
+
+1. `setUpClass <VppTestCase.setUpClass>`:
+ This function is called once for each test class, allowing a one-time test
+ setup to be executed. If this functions throws an exception,
+ none of the test functions are executed.
+2. `setUp <VppTestCase.setUp>`:
+ The setUp function runs before each of the test functions. If this function
+ throws an exception other than AssertionError_ or SkipTest_, then this is
+ considered an error, not a test failure.
+3. *test_<name>*:
+ This is the guts of the test case. It should execute the test scenario
+ and use the various assert functions from the unittest framework to check
+ necessary.
+4. `tearDown <VppTestCase.tearDown>`:
+ The tearDown function is called after each test function with the purpose
+ of doing partial cleanup.
+5. `tearDownClass <VppTestCase.tearDownClass>`:
+ Method called once after running all of the test funnctions to perform
+ the final cleanup.
+
+Test temporary directory and VPP life cycle
+################################################
+
+Test separation is achieved by separating the test files and vpp instances.
+Each test creates a temporary directory and it's name is used to create
+a shared memory prefix which is used to run a VPP instance.
+This way, there is no conflict between any other VPP instances running
+on the box and the test VPP. Any temporary files created by the test case
+are stored in this temporary test directory.
+
+Virtual environment
+###################
+
+Virtualenv_ is a python module which provides a means to crate an environment
+containing the dependencies required by the |vtf|, allowing a separation
+from any existing system-wide packages. |vtf|'s Makefile automatically
+creates a virtualenv_ inside build-root and installs the required packages
+in that environment. The environment is entered whenever executing a test
+via one of the make test targets.
+
+Naming conventions
+##################
+
+Most unit tests do some kind of packet manipulation - sending and receiving
+packets between VPP and virtual hosts connected to the VPP. Referring
+to the sides, addresses, etc.. is always done as if looking from the VPP side,
+thus:
+
+* *local_* prefix is used for the VPP side.
+ So e.g. `local_ip4 <VppInterface.local_ip4>` address is the IPv4 address
+ assigned to the VPP interface.
+* *remote_* prefix is used for the virtual host side.
+ So e.g. `remote_mac <VppInterface.remote_mac>` address is the MAC address
+ assigned to the virtual host connected to the VPP.
+
+Packet flow in the |vtf|
+########################
+
+Test framework -> VPP
+~~~~~~~~~~~~~~~~~~~~~
+
+|vtf| doesn't send any packets to VPP directly. Traffic is instead injected
+using packet-generator interfaces, represented by the `VppPGInterface` class.
+Packets are written into a temporary .pcap file, which is then read by the VPP
+and the packets are injected into the VPP world.
+
+VPP -> test framework
+~~~~~~~~~~~~~~~~~~~~~
+
+Similarly, VPP doesn't send any packets to |vtf| directly. Instead, packet
+capture feature is used to capture and write traffic to a temporary .pcap file,
+which is then read and analyzed by the |vtf|.
+
+Test framework objects
+######################
+
+The following objects provide VPP abstraction and provide a means to do
+common tasks easily in the test cases.
+
+* `VppInterface`: abstract class representing generic VPP interface
+ and contains some common functionality, which is then used by derived classes
+* `VppPGInterface`: class representing VPP packet-generator interface.
+ The interface is created/destroyed when the object is created/destroyed.
+* `VppSubInterface`: VPP sub-interface abstract class, containing common
+ functionality for e.g. `VppDot1QSubint` and `VppDot1ADSubint` classes
+
+How VPP API/CLI is called
+#########################
+
+Vpp provides python bindings in a python module called vpp-papi, which the test
+framework installs in the virtual environment. A shim layer represented by
+the `VppPapiProvider` class is built on top of the vpp-papi, serving these
+purposes:
+
+1. Automatic return value checks:
+ After each API is called, the return value is checked against the expected
+ return value (by default 0, but can be overridden) and an exception
+ is raised if the check fails.
+2. Automatic call of hooks:
+
+ a. `before_cli <Hook.before_cli>` and `before_api <Hook.before_api>` hooks
+ are used for debug logging and stepping through the test
+ b. `after_cli <Hook.after_cli>` and `after_api <Hook.after_api>` hooks
+ are used for monitoring the vpp process for crashes
+3. Simplification of API calls:
+ Many of the VPP APIs take a lot of parameters and by providing sane defaults
+ for these, the API is much easier to use in the common case and the code is
+ more readable. E.g. ip_add_del_route API takes ~25 parameters, of which
+ in the common case, only 3 are needed.
+
+Example: how to add a new test
+##############################
+
+In this example, we will describe how to add a new test case which tests VPP...
+
+1. Add a new file called...
+2. Add a setUpClass function containing...
+3. Add the test code in test...
+4. Run the test...
+
+|vtf| module documentation
+##########################
+
.. toctree::
:maxdepth: 2
+ :glob:
modules.rst