summaryrefslogtreecommitdiffstats
path: root/test/test_ipsec_spd_flow_cache_input.py
diff options
context:
space:
mode:
Diffstat (limited to 'test/test_ipsec_spd_flow_cache_input.py')
-rw-r--r--test/test_ipsec_spd_flow_cache_input.py865
1 files changed, 865 insertions, 0 deletions
diff --git a/test/test_ipsec_spd_flow_cache_input.py b/test/test_ipsec_spd_flow_cache_input.py
new file mode 100644
index 00000000000..283f345be18
--- /dev/null
+++ b/test/test_ipsec_spd_flow_cache_input.py
@@ -0,0 +1,865 @@
+import socket
+import unittest
+
+from util import ppp
+from asfframework import VppTestRunner
+from template_ipsec import SpdFlowCacheTemplate
+
+
+class SpdFlowCacheInbound(SpdFlowCacheTemplate):
+ # Override setUpConstants to enable inbound flow cache in config
+ @classmethod
+ def setUpConstants(cls):
+ super(SpdFlowCacheInbound, cls).setUpConstants()
+ cls.vpp_cmdline.extend(["ipsec", "{", "ipv4-inbound-spd-flow-cache on", "}"])
+ cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline))
+
+
+class IPSec4SpdTestCaseBypass(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (add bypass)"""
+
+ def test_ipsec_spd_inbound_bypass(self):
+ # In this test case, packets in IPv4 FWD path are configured
+ # to go through IPSec inbound SPD policy lookup.
+ #
+ # 2 inbound SPD rules (1 HIGH and 1 LOW) are added.
+ # - High priority rule action is set to DISCARD.
+ # - Low priority rule action is set to BYPASS.
+ #
+ # Since BYPASS rules take precedence over DISCARD
+ # (the order being PROTECT, BYPASS, DISCARD) we expect the
+ # BYPASS rule to match and traffic to be correctly forwarded.
+ self.create_interfaces(2)
+ pkt_count = 5
+
+ self.spd_create_and_intf_add(1, [self.pg1, self.pg0])
+
+ # create input rules
+ # bypass rule should take precedence over discard rule,
+ # even though it's lower priority
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 15
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=15,
+ policy_type="discard",
+ )
+
+ # create output rule so we can capture forwarded packets
+ policy_2 = self.spd_add_rem_policy( # outbound, priority 10
+ 1,
+ self.pg0,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+ # create the packet stream
+ packets = self.create_stream(self.pg0, self.pg1, pkt_count)
+ # add the stream to the source interface
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture()
+ self.pg_start()
+
+ # check capture on pg1
+ capture = self.pg1.get_capture()
+ for packet in capture:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+ self.logger.debug("SPD: Num packets: %s", len(capture.res))
+
+ # verify captured packets
+ self.verify_capture(self.pg0, self.pg1, capture)
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(0, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # check input policy has been cached
+ self.verify_num_inbound_flow_cache_entries(1)
+
+
+class IPSec4SpdTestCaseDiscard(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (add discard)"""
+
+ def test_ipsec_spd_inbound_discard(self):
+ # In this test case, packets in IPv4 FWD path are configured
+ # to go through IPSec inbound SPD policy lookup.
+ # 1 DISCARD rule is added, so all traffic should be dropped.
+ self.create_interfaces(2)
+ pkt_count = 5
+
+ self.spd_create_and_intf_add(1, [self.pg1, self.pg0])
+
+ # create input rule
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="discard",
+ )
+
+ # create output rule so we can capture forwarded packets
+ policy_1 = self.spd_add_rem_policy( # outbound, priority 10
+ 1,
+ self.pg0,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+ # create the packet stream
+ packets = self.create_stream(self.pg0, self.pg1, pkt_count)
+ # add the stream to the source interface
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture()
+ self.pg_start()
+ # inbound discard rule should have dropped traffic
+ self.pg1.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(0, policy_1)
+ # only inbound discard rule should have been cached
+ self.verify_num_inbound_flow_cache_entries(1)
+
+
+class IPSec4SpdTestCaseRemoveInbound(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (remove bypass)"""
+
+ def test_ipsec_spd_inbound_remove(self):
+ # In this test case, packets in IPv4 FWD path are configured
+ # to go through IPSec inbound SPD policy lookup.
+ #
+ # 2 inbound SPD rules (1 HIGH and 1 LOW) are added.
+ # - High priority rule action is set to DISCARD.
+ # - Low priority rule action is set to BYPASS.
+ #
+ # Since BYPASS rules take precedence over DISCARD
+ # (the order being PROTECT, BYPASS, DISCARD) we expect the
+ # BYPASS rule to match and traffic to be correctly forwarded.
+ #
+ # The BYPASS rules is then removed, and we check that all traffic
+ # is now correctly dropped.
+ self.create_interfaces(2)
+ pkt_count = 5
+
+ self.spd_create_and_intf_add(1, [self.pg1, self.pg0])
+
+ # create input rules
+ # bypass rule should take precedence over discard rule,
+ # even though it's lower priority
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 15
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=15,
+ policy_type="discard",
+ )
+
+ # create output rule so we can capture forwarded packets
+ policy_2 = self.spd_add_rem_policy( # outbound, priority 10
+ 1,
+ self.pg0,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+ # create the packet stream
+ packets = self.create_stream(self.pg0, self.pg1, pkt_count)
+ # add the stream to the source interface
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture()
+ self.pg_start()
+
+ # check capture on pg1
+ capture = self.pg1.get_capture()
+ for packet in capture:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+ self.logger.debug("SPD: Num packets: %s", len(capture.res))
+
+ # verify captured packets
+ self.verify_capture(self.pg0, self.pg1, capture)
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(0, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # check input policy has been cached
+ self.verify_num_inbound_flow_cache_entries(1)
+
+ # remove the input bypass rule
+ self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ remove=True,
+ )
+ # verify flow cache counter has been reset by rule removal
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # resend the same packets
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture() # flush the old capture
+ self.pg_start()
+
+ # inbound discard rule should have dropped traffic
+ self.pg1.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # by removing the bypass rule, we should have reset the flow cache
+ # we only expect the discard rule to now be in the flow cache
+ self.verify_num_inbound_flow_cache_entries(1)
+
+
+class IPSec4SpdTestCaseReaddInbound(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (add, remove, re-add bypass)"""
+
+ def test_ipsec_spd_inbound_readd(self):
+ # In this test case, packets in IPv4 FWD path are configured
+ # to go through IPSec inbound SPD policy lookup.
+ #
+ # 2 inbound SPD rules (1 HIGH and 1 LOW) are added.
+ # - High priority rule action is set to DISCARD.
+ # - Low priority rule action is set to BYPASS.
+ #
+ # Since BYPASS rules take precedence over DISCARD
+ # (the order being PROTECT, BYPASS, DISCARD) we expect the
+ # BYPASS rule to match and traffic to be correctly forwarded.
+ #
+ # The BYPASS rules is then removed, and we check that all traffic
+ # is now correctly dropped.
+ #
+ # The BYPASS rule is then readded, checking traffic is not forwarded
+ # correctly again
+ self.create_interfaces(2)
+ pkt_count = 5
+
+ self.spd_create_and_intf_add(1, [self.pg1, self.pg0])
+
+ # create input rules
+ # bypass rule should take precedence over discard rule,
+ # even though it's lower priority
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 15
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=15,
+ policy_type="discard",
+ )
+
+ # create output rule so we can capture forwarded packets
+ policy_2 = self.spd_add_rem_policy( # outbound, priority 10
+ 1,
+ self.pg0,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+ # create the packet stream
+ packets = self.create_stream(self.pg0, self.pg1, pkt_count)
+ # add the stream to the source interface
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture()
+ self.pg_start()
+
+ # check capture on pg1
+ capture = self.pg1.get_capture()
+ for packet in capture:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+ self.logger.debug("SPD: Num packets: %s", len(capture.res))
+
+ # verify captured packets
+ self.verify_capture(self.pg0, self.pg1, capture)
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(0, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # check input policy has been cached
+ self.verify_num_inbound_flow_cache_entries(1)
+
+ # remove the input bypass rule
+ self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ remove=True,
+ )
+ # verify flow cache counter has been reset by rule removal
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # resend the same packets
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture() # flush the old capture
+ self.pg_start()
+
+ # inbound discard rule should have dropped traffic
+ self.pg1.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # by removing the bypass rule, flow cache was reset
+ # we only expect the discard rule to now be in the flow cache
+ self.verify_num_inbound_flow_cache_entries(1)
+
+ # readd the input bypass rule
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # verify flow cache counter has been reset by rule addition
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # resend the same packets
+ self.pg0.add_stream(packets)
+ self.pg1.enable_capture() # flush the old capture
+ self.pg_start()
+
+ # check capture on pg1
+ capture = self.pg1.get_capture()
+ for packet in capture:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+
+ # verify captured packets
+ self.verify_capture(self.pg0, self.pg1, capture)
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count * 2, policy_2)
+ # by readding the bypass rule, we reset the flow cache
+ # we only expect the bypass rule to now be in the flow cache
+ self.verify_num_inbound_flow_cache_entries(1)
+
+
+class IPSec4SpdTestCaseMultipleInbound(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (multiple interfaces, multiple rules)"""
+
+ def test_ipsec_spd_inbound_multiple(self):
+ # In this test case, packets in IPv4 FWD path are configured to go
+ # through IPSec outbound SPD policy lookup.
+ #
+ # Multiples rules on multiple interfaces are tested at the same time.
+ # 3x interfaces are configured, binding the same SPD to each.
+ # Each interface has 1 SPD rule- 2x BYPASS and 1x DISCARD
+ #
+ # Traffic should be forwarded with destinations pg1 & pg2
+ # and dropped to pg0.
+ self.create_interfaces(3)
+ pkt_count = 5
+ # bind SPD to all interfaces
+ self.spd_create_and_intf_add(1, self.pg_interfaces)
+ # add input rules on all interfaces
+ # pg0 -> pg1
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # pg1 -> pg2
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg2,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # pg2 -> pg0
+ policy_2 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg0,
+ self.pg2,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="discard",
+ )
+
+ # create output rules covering the the full ip range
+ # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets
+ policy_3 = self.spd_add_rem_policy( # outbound, priority 10
+ 1,
+ self.pg0,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ all_ips=True,
+ )
+
+ # check flow cache is empty (0 active elements) before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # create the packet streams
+ packets0 = self.create_stream(self.pg0, self.pg1, pkt_count)
+ packets1 = self.create_stream(self.pg1, self.pg2, pkt_count)
+ packets2 = self.create_stream(self.pg2, self.pg0, pkt_count)
+ # add the streams to the source interfaces
+ self.pg0.add_stream(packets0)
+ self.pg1.add_stream(packets1)
+ self.pg2.add_stream(packets2)
+ # enable capture on all interfaces
+ for pg in self.pg_interfaces:
+ pg.enable_capture()
+ # start the packet generator
+ self.pg_start()
+
+ # get captures from ifs
+ if_caps = []
+ for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2
+ if_caps.append(pg.get_capture())
+ for packet in if_caps[-1]:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+
+ # verify captures that matched BYPASS rules
+ self.verify_capture(self.pg0, self.pg1, if_caps[0])
+ self.verify_capture(self.pg1, self.pg2, if_caps[1])
+ # verify that traffic to pg0 matched DISCARD rule and was dropped
+ self.pg0.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # check flow/policy match was cached for: 3x input policies
+ self.verify_num_inbound_flow_cache_entries(3)
+
+
+class IPSec4SpdTestCaseOverwriteStaleInbound(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (overwrite stale entries)"""
+
+ def test_ipsec_spd_inbound_overwrite(self):
+ # The operation of the flow cache is setup so that the entire cache
+ # is invalidated when adding or removing an SPD policy rule.
+ # For performance, old cache entries are not zero'd, but remain
+ # in the table as "stale" entries. If a flow matches a stale entry,
+ # and the epoch count does NOT match the current count, the entry
+ # is overwritten.
+ # In this test, 3 active rules are created and matched to enter
+ # them into the flow cache.
+ # A single entry is removed to invalidate the entire cache.
+ # We then readd the rule and test that overwriting of the previous
+ # stale entries occurs as expected, and that the flow cache entry
+ # counter is updated correctly.
+ self.create_interfaces(3)
+ pkt_count = 5
+ # bind SPD to all interfaces
+ self.spd_create_and_intf_add(1, self.pg_interfaces)
+ # add input rules on all interfaces
+ # pg0 -> pg1
+ policy_0 = self.spd_add_rem_policy( # inbound
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # pg1 -> pg2
+ policy_1 = self.spd_add_rem_policy( # inbound
+ 1,
+ self.pg2,
+ self.pg1,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # pg2 -> pg0
+ policy_2 = self.spd_add_rem_policy( # inbound
+ 1,
+ self.pg0,
+ self.pg2,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="discard",
+ )
+
+ # create output rules covering the the full ip range
+ # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets
+ policy_3 = self.spd_add_rem_policy( # outbound
+ 1,
+ self.pg0,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ all_ips=True,
+ )
+
+ # check flow cache is empty (0 active elements) before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # create the packet streams
+ packets0 = self.create_stream(self.pg0, self.pg1, pkt_count)
+ packets1 = self.create_stream(self.pg1, self.pg2, pkt_count)
+ packets2 = self.create_stream(self.pg2, self.pg0, pkt_count)
+ # add the streams to the source interfaces
+ self.pg0.add_stream(packets0)
+ self.pg1.add_stream(packets1)
+ self.pg2.add_stream(packets2)
+ # enable capture on all interfaces
+ for pg in self.pg_interfaces:
+ pg.enable_capture()
+ # start the packet generator
+ self.pg_start()
+
+ # get captures from ifs
+ if_caps = []
+ for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2
+ if_caps.append(pg.get_capture())
+ for packet in if_caps[-1]:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+
+ # verify captures that matched BYPASS rules
+ self.verify_capture(self.pg0, self.pg1, if_caps[0])
+ self.verify_capture(self.pg1, self.pg2, if_caps[1])
+ # verify that traffic to pg0 matched DISCARD rule and was dropped
+ self.pg0.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ # check flow/policy match was cached for: 3x input policies
+ self.verify_num_inbound_flow_cache_entries(3)
+
+ # adding an outbound policy should not invalidate output flow cache
+ self.spd_add_rem_policy( # outbound
+ 1,
+ self.pg0,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=1,
+ policy_type="bypass",
+ all_ips=True,
+ )
+ # check inbound flow cache counter has not been reset
+ self.verify_num_inbound_flow_cache_entries(3)
+
+ # remove + readd bypass policy - flow cache counter will be reset,
+ # and there will be 3x stale entries in flow cache
+ self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ remove=True,
+ )
+ # readd policy
+ policy_0 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ # check counter was reset
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # resend the same packets
+ self.pg0.add_stream(packets0)
+ self.pg1.add_stream(packets1)
+ self.pg2.add_stream(packets2)
+ for pg in self.pg_interfaces:
+ pg.enable_capture() # flush previous captures
+ self.pg_start()
+
+ # get captures from ifs
+ if_caps = []
+ for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2
+ if_caps.append(pg.get_capture())
+ for packet in if_caps[-1]:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+
+ # verify captures that matched BYPASS rules
+ self.verify_capture(self.pg0, self.pg1, if_caps[0])
+ self.verify_capture(self.pg1, self.pg2, if_caps[1])
+ # verify that traffic to pg0 matched DISCARD rule and was dropped
+ self.pg0.assert_nothing_captured()
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_0)
+ self.verify_policy_match(pkt_count * 2, policy_1)
+ self.verify_policy_match(pkt_count * 2, policy_2)
+ # we are overwriting 3x stale entries - check flow cache counter
+ # is correct
+ self.verify_num_inbound_flow_cache_entries(3)
+
+
+class IPSec4SpdTestCaseCollisionInbound(SpdFlowCacheInbound):
+ """ IPSec/IPv4 inbound: Policy mode test case with flow cache \
+ (hash collision)"""
+
+ # Override class setup to restrict hash table size to 16 buckets.
+ # This forces using only the lower 4 bits of the hash as a key,
+ # making hash collisions easy to find.
+ @classmethod
+ def setUpConstants(cls):
+ super(SpdFlowCacheInbound, cls).setUpConstants()
+ cls.vpp_cmdline.extend(
+ [
+ "ipsec",
+ "{",
+ "ipv4-inbound-spd-flow-cache on",
+ "ipv4-inbound-spd-hash-buckets 16",
+ "}",
+ ]
+ )
+ cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline))
+
+ def test_ipsec_spd_inbound_collision(self):
+ # The flow cache operation is setup to overwrite an entry
+ # if a hash collision occurs.
+ # In this test, 2 packets are configured that result in a
+ # hash with the same lower 4 bits.
+ # After the first packet is received, there should be one
+ # active entry in the flow cache.
+ # After the second packet with the same lower 4 bit hash
+ # is received, this should overwrite the same entry.
+ # Therefore there will still be a total of one (1) entry,
+ # in the flow cache with two matching policies.
+ # crc32_supported() method is used to check cpu for crc32
+ # intrinsic support for hashing.
+ # If crc32 is not supported, we fall back to clib_xxhash()
+ self.create_interfaces(4)
+ pkt_count = 5
+ # bind SPD to all interfaces
+ self.spd_create_and_intf_add(1, self.pg_interfaces)
+
+ # create output rules covering the the full ip range
+ # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets
+ policy_0 = self.spd_add_rem_policy( # outbound
+ 1,
+ self.pg0,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=1,
+ priority=10,
+ policy_type="bypass",
+ all_ips=True,
+ )
+
+ capture_intfs = []
+ if self.crc32_supported(): # create crc32 collision on last 4 bits
+ hashed_with_crc32 = True
+ # add matching rules
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg2,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ policy_2 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg3,
+ self.pg0,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ # we expect to get captures on pg1 + pg3
+ capture_intfs.append(self.pg1)
+ capture_intfs.append(self.pg3)
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # create the packet streams
+ # packet hashes to:
+ # ad727628
+ packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 1)
+ # b5512898
+ packets2 = self.create_stream(self.pg0, self.pg3, pkt_count, 1, 1)
+ # add the streams to the source interfaces
+ self.pg2.add_stream(packets1)
+ self.pg0.add_stream(packets2)
+ else: # create xxhash collision on last 4 bits
+ hashed_with_crc32 = False
+ # add matching rules
+ policy_1 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg1,
+ self.pg2,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+ policy_2 = self.spd_add_rem_policy( # inbound, priority 10
+ 1,
+ self.pg2,
+ self.pg3,
+ socket.IPPROTO_UDP,
+ is_out=0,
+ priority=10,
+ policy_type="bypass",
+ )
+
+ capture_intfs.append(self.pg1)
+ capture_intfs.append(self.pg2)
+
+ # check flow cache is empty before sending traffic
+ self.verify_num_inbound_flow_cache_entries(0)
+
+ # create the packet streams
+ # 2f8f90f557eef12c
+ packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 1)
+ # 6b7f9987719ffc1c
+ packets2 = self.create_stream(self.pg3, self.pg2, pkt_count, 1, 1)
+ # add the streams to the source interfaces
+ self.pg2.add_stream(packets1)
+ self.pg3.add_stream(packets2)
+
+ # enable capture on interfaces we expect capture on & send pkts
+ for pg in capture_intfs:
+ pg.enable_capture()
+ self.pg_start()
+
+ # get captures
+ if_caps = []
+ for pg in capture_intfs:
+ if_caps.append(pg.get_capture())
+ for packet in if_caps[-1]:
+ try:
+ self.logger.debug(ppp("SPD Add - Got packet:", packet))
+ except Exception:
+ self.logger.error(ppp("Unexpected or invalid packet:", packet))
+ raise
+
+ # verify captures that matched BYPASS rule
+ if hashed_with_crc32:
+ self.verify_capture(self.pg2, self.pg1, if_caps[0])
+ self.verify_capture(self.pg0, self.pg3, if_caps[1])
+ else: # hashed with xxhash
+ self.verify_capture(self.pg2, self.pg1, if_caps[0])
+ self.verify_capture(self.pg3, self.pg2, if_caps[1])
+
+ # verify all policies matched the expected number of times
+ self.verify_policy_match(pkt_count, policy_1)
+ self.verify_policy_match(pkt_count, policy_2)
+ self.verify_policy_match(pkt_count * 2, policy_0) # output policy
+ # we have matched 2 policies, but due to the hash collision
+ # one active entry is expected
+ self.verify_num_inbound_flow_cache_entries(1)
+
+
+if __name__ == "__main__":
+ unittest.main(testRunner=VppTestRunner)