diff options
Diffstat (limited to 'test/test_mpls.py')
| -rw-r--r-- | test/test_mpls.py | 110 |
1 files changed, 82 insertions, 28 deletions
diff --git a/test/test_mpls.py b/test/test_mpls.py index 4a1c663c444..2e0b71f3328 100644 --- a/test/test_mpls.py +++ b/test/test_mpls.py @@ -18,6 +18,8 @@ from scapy.layers.inet import IP, UDP, ICMP from scapy.layers.inet6 import IPv6, ICMPv6TimeExceeded from scapy.contrib.mpls import MPLS +NUM_PKTS = 67 + def verify_filter(capture, sent): if not len(capture) == len(sent): @@ -1476,7 +1478,7 @@ class TestMPLSDisabled(VppTestCase): class TestMPLSPIC(VppTestCase): - """ MPLS PIC edge convergence """ + """ MPLS Prefix-Independent Convergence (PIC) edge convergence """ @classmethod def setUpClass(cls): @@ -1504,6 +1506,7 @@ class TestMPLSPIC(VppTestCase): self.pg0.config_ip4() self.pg0.resolve_arp() self.pg0.enable_mpls() + self.pg1.admin_up() self.pg1.config_ip4() self.pg1.resolve_arp() @@ -1517,6 +1520,7 @@ class TestMPLSPIC(VppTestCase): self.pg2.set_table_ip6(1) self.pg2.config_ip6() self.pg2.resolve_ndp() + self.pg3.admin_up() self.pg3.set_table_ip4(1) self.pg3.config_ip4() @@ -1537,7 +1541,7 @@ class TestMPLSPIC(VppTestCase): super(TestMPLSPIC, self).tearDown() def test_mpls_ibgp_pic(self): - """ MPLS iBGP PIC edge convergence + """ MPLS iBGP Prefix-Independent Convergence (PIC) edge convergence 1) setup many iBGP VPN routes via a pair of iBGP peers. 2) Check EMCP forwarding to these peers @@ -1566,7 +1570,7 @@ class TestMPLSPIC(VppTestCase): # vpn_routes = [] pkts = [] - for ii in range(64): + for ii in range(NUM_PKTS): dst = "192.168.1.%d" % ii vpn_routes.append(VppIpRoute(self, dst, 32, [VppRoutePath("10.0.0.45", @@ -1594,13 +1598,16 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg0._get_capture(1) - rx1 = self.pg1._get_capture(1) + rx0 = self.pg0._get_capture(NUM_PKTS) + rx1 = self.pg1._get_capture(NUM_PKTS) # not testing the LB hashing algorithm so we're not concerned # with the split ratio, just as long as neither is 0 self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) # # use a test CLI command to stop the FIB walk process, this @@ -1622,7 +1629,10 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg0.get_capture(len(pkts)) + rx0 = self.pg0.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # # enable the FIB walk process to converge the FIB @@ -1636,7 +1646,10 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg0.get_capture(64) + rx0 = self.pg0.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # # Add the IGP route back and we return to load-balancing @@ -1647,15 +1660,18 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg0._get_capture(1) - rx1 = self.pg1._get_capture(1) + rx0 = self.pg0._get_capture(NUM_PKTS) + rx1 = self.pg1._get_capture(NUM_PKTS) self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) def test_mpls_ebgp_pic(self): - """ MPLS eBGP PIC edge convergence + """ MPLS eBGP Prefix-Independent Convergence (PIC) edge convergence - 1) setup many eBGP VPN routes via a pair of eBGP peers + 1) setup many eBGP VPN routes via a pair of eBGP peers. 2) Check EMCP forwarding to these peers 3) withdraw one eBGP path - expect LB across remaining eBGP """ @@ -1667,7 +1683,7 @@ class TestMPLSPIC(VppTestCase): vpn_routes = [] vpn_bindings = [] pkts = [] - for ii in range(64): + for ii in range(NUM_PKTS): dst = "192.168.1.%d" % ii local_label = 1600 + ii vpn_routes.append(VppIpRoute(self, dst, 32, @@ -1693,14 +1709,24 @@ class TestMPLSPIC(VppTestCase): UDP(sport=1234, dport=1234) / Raw('\xa5' * 100)) + # + # Send the packet stream (one pkt to each VPN route) + # - expect a 50-50 split of the traffic + # self.pg0.add_stream(pkts) self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg2._get_capture(1) - rx1 = self.pg3._get_capture(1) + rx0 = self.pg2._get_capture(NUM_PKTS) + rx1 = self.pg3._get_capture(NUM_PKTS) + + # not testing the LB hashing algorithm so we're not concerned + # with the split ratio, just as long as neither is 0 self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) # # use a test CLI command to stop the FIB walk process, this @@ -1721,34 +1747,48 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg3.get_capture(len(pkts)) + rx0 = self.pg3.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # # enable the FIB walk process to converge the FIB # self.vapi.ppcli("test fib-walk-process enable") + + # + # packets should still be forwarded through the remaining peer + # self.pg0.add_stream(pkts) self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg3.get_capture(len(pkts)) + rx0 = self.pg3.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # - # put the connecteds back + # put the connected routes back # self.pg2.config_ip4() + self.pg2.resolve_arp() self.pg0.add_stream(pkts) self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg2._get_capture(1) - rx1 = self.pg3._get_capture(1) + rx0 = self.pg2._get_capture(NUM_PKTS) + rx1 = self.pg3._get_capture(NUM_PKTS) self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) def test_mpls_v6_ebgp_pic(self): - """ MPLSv6 eBGP PIC edge convergence + """ MPLSv6 eBGP Prefix-Independent Convergence (PIC) edge convergence 1) setup many eBGP VPNv6 routes via a pair of eBGP peers 2) Check EMCP forwarding to these peers @@ -1762,7 +1802,7 @@ class TestMPLSPIC(VppTestCase): vpn_routes = [] vpn_bindings = [] pkts = [] - for ii in range(64): + for ii in range(NUM_PKTS): dst = "3000::%d" % ii local_label = 1600 + ii vpn_routes.append(VppIpRoute( @@ -1797,10 +1837,13 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg2._get_capture(1) - rx1 = self.pg3._get_capture(1) + rx0 = self.pg2._get_capture(NUM_PKTS) + rx1 = self.pg3._get_capture(NUM_PKTS) self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) # # use a test CLI command to stop the FIB walk process, this @@ -1823,7 +1866,10 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg3.get_capture(len(pkts)) + rx0 = self.pg3.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # # enable the FIB walk process to converge the FIB @@ -1833,22 +1879,29 @@ class TestMPLSPIC(VppTestCase): self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg3.get_capture(len(pkts)) + rx0 = self.pg3.get_capture(NUM_PKTS) + self.assertEqual(len(pkts), len(rx0), + "Expected all (%s) packets across single path. " + "rx0: %s." % (len(pkts), len(rx0))) # - # put the connecteds back + # put the connected routes back # self.pg2.admin_up() self.pg2.config_ip6() + self.pg2.resolve_ndp() self.pg0.add_stream(pkts) self.pg_enable_capture(self.pg_interfaces) self.pg_start() - rx0 = self.pg2._get_capture(1) - rx1 = self.pg3._get_capture(1) + rx0 = self.pg2._get_capture(NUM_PKTS) + rx1 = self.pg3._get_capture(NUM_PKTS) self.assertNotEqual(0, len(rx0)) self.assertNotEqual(0, len(rx1)) + self.assertEqual(len(pkts), len(rx0) + len(rx1), + "Expected all (%s) packets across both ECMP paths. " + "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1))) class TestMPLSL2(VppTestCase): @@ -2064,5 +2117,6 @@ class TestMPLSL2(VppTestCase): self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0) + if __name__ == '__main__': unittest.main(testRunner=VppTestRunner) |