summaryrefslogtreecommitdiffstats
path: root/test/test_srv6.py
diff options
context:
space:
mode:
Diffstat (limited to 'test/test_srv6.py')
-rw-r--r--test/test_srv6.py116
1 files changed, 116 insertions, 0 deletions
diff --git a/test/test_srv6.py b/test/test_srv6.py
index 40b53375ddb..a15c69713a5 100644
--- a/test/test_srv6.py
+++ b/test/test_srv6.py
@@ -10,6 +10,7 @@ from vpp_srv6 import (
SRv6LocalSIDBehaviors,
VppSRv6LocalSID,
VppSRv6Policy,
+ VppSRv6PolicyV2,
SRv6PolicyType,
VppSRv6Steering,
SRv6PolicySteeringTypes,
@@ -248,6 +249,121 @@ class TestSRv6(VppTestCase):
# cleanup interfaces
self.teardown_interfaces()
+ def test_SRv6_T_Encaps_with_v6src(self):
+ """Test SRv6 Transit.Encaps behavior for IPv6 and select multiple src v6addr case."""
+ # send traffic to one destination interface
+ # source and destination are IPv6 only
+ self.setup_interfaces(ipv6=[True, True])
+
+ # configure FIB entries
+ route = VppIpRoute(
+ self, "a4::", 64, [VppRoutePath(self.pg1.remote_ip6, self.pg1.sw_if_index)]
+ )
+ route.add_vpp_config()
+
+ # configure encaps IPv6 source address
+ # needs to be done before SR Policy config
+ # TODO: API?
+ self.vapi.cli("set sr encaps source addr a3::")
+
+ bsid = "a3::9999:1"
+ other_src_ip = "b1::"
+ # configure SRv6 Policy
+ # Note: segment list order: first -> last
+ sr_policy = VppSRv6PolicyV2(
+ self,
+ bsid=bsid,
+ is_encap=1,
+ sr_type=SRv6PolicyType.SR_POLICY_TYPE_DEFAULT,
+ weight=1,
+ fib_table=0,
+ segments=["a4::", "a5::", "a6::c7"],
+ encap_src=other_src_ip,
+ source=other_src_ip,
+ )
+ sr_policy.add_vpp_config()
+ self.sr_policy = sr_policy
+
+ # log the sr policies
+ self.logger.info(self.vapi.cli("show sr policies"))
+
+ # steer IPv6 traffic to a7::/64 into SRv6 Policy
+ # use the bsid of the above self.sr_policy
+ pol_steering = VppSRv6Steering(
+ self,
+ bsid=self.sr_policy.bsid,
+ prefix="a7::",
+ mask_width=64,
+ traffic_type=SRv6PolicySteeringTypes.SR_STEER_IPV6,
+ sr_policy_index=0,
+ table_id=0,
+ sw_if_index=0,
+ )
+ pol_steering.add_vpp_config()
+
+ # log the sr steering policies
+ self.logger.info(self.vapi.cli("show sr steering-policies"))
+
+ # create packets
+ count = len(self.pg_packet_sizes)
+ dst_inner = "a7::1234"
+ pkts = []
+
+ # create IPv6 packets without SRH
+ packet_header = self.create_packet_header_IPv6(dst_inner)
+ # create traffic stream pg0->pg1
+ pkts.extend(
+ self.create_stream(
+ self.pg0, self.pg1, packet_header, self.pg_packet_sizes, count
+ )
+ )
+
+ # create IPv6 packets with SRH
+ # packets with segments-left 1, active segment a7::
+ packet_header = self.create_packet_header_IPv6_SRH(
+ sidlist=["a8::", "a7::", "a6::"], segleft=1
+ )
+ # create traffic stream pg0->pg1
+ pkts.extend(
+ self.create_stream(
+ self.pg0, self.pg1, packet_header, self.pg_packet_sizes, count
+ )
+ )
+
+ # create IPv6 packets with SRH and IPv6
+ # packets with segments-left 1, active segment a7::
+ packet_header = self.create_packet_header_IPv6_SRH_IPv6(
+ dst_inner, sidlist=["a8::", "a7::", "a6::"], segleft=1
+ )
+ # create traffic stream pg0->pg1
+ pkts.extend(
+ self.create_stream(
+ self.pg0, self.pg1, packet_header, self.pg_packet_sizes, count
+ )
+ )
+
+ # send packets and verify received packets
+ self.send_and_verify_pkts(
+ self.pg0, pkts, self.pg1, self.compare_rx_tx_packet_T_Encaps
+ )
+
+ # log the localsid counters
+ self.logger.info(self.vapi.cli("show sr localsid"))
+
+ # remove SR steering
+ pol_steering.remove_vpp_config()
+ self.logger.info(self.vapi.cli("show sr steering-policies"))
+
+ # remove SR Policies
+ self.sr_policy.remove_vpp_config()
+ self.logger.info(self.vapi.cli("show sr policies"))
+
+ # remove FIB entries
+ # done by tearDown
+
+ # cleanup interfaces
+ self.teardown_interfaces()
+
@unittest.skipUnless(0, "PC to fix")
def test_SRv6_T_Insert(self):
"""Test SRv6 Transit.Insert behavior (IPv6 only)."""