diff options
Diffstat (limited to 'test/test_srv6_ad.py')
| -rw-r--r-- | test/test_srv6_ad.py | 356 |
1 files changed, 205 insertions, 151 deletions
diff --git a/test/test_srv6_ad.py b/test/test_srv6_ad.py index dad7c186a93..88c0b1d8074 100644 --- a/test/test_srv6_ad.py +++ b/test/test_srv6_ad.py @@ -7,8 +7,14 @@ from socket import AF_INET6 from framework import VppTestCase, VppTestRunner from vpp_ip import DpoProto from vpp_ip_route import VppIpRoute, VppRoutePath, VppIpTable -from vpp_srv6 import SRv6LocalSIDBehaviors, VppSRv6LocalSID, VppSRv6Policy, \ - SRv6PolicyType, VppSRv6Steering, SRv6PolicySteeringTypes +from vpp_srv6 import ( + SRv6LocalSIDBehaviors, + VppSRv6LocalSID, + VppSRv6Policy, + SRv6PolicyType, + VppSRv6Steering, + SRv6PolicySteeringTypes, +) import scapy.compat from scapy.packet import Raw @@ -20,7 +26,7 @@ from util import ppp class TestSRv6Ad(VppTestCase): - """ SRv6 Dynamic Proxy plugin Test Case """ + """SRv6 Dynamic Proxy plugin Test Case""" @classmethod def setUpClass(self): @@ -31,8 +37,7 @@ class TestSRv6Ad(VppTestCase): super(TestSRv6Ad, cls).tearDownClass() def setUp(self): - """ Perform test setup before each test case. - """ + """Perform test setup before each test case.""" super(TestSRv6Ad, self).setUp() # packet sizes, inclusive L2 overhead @@ -42,17 +47,15 @@ class TestSRv6Ad(VppTestCase): self.reset_packet_infos() def tearDown(self): - """ Clean up test setup after each test case. - """ + """Clean up test setup after each test case.""" self.teardown_interfaces() super(TestSRv6Ad, self).tearDown() - def configure_interface(self, - interface, - ipv6=False, ipv4=False, - ipv6_table_id=0, ipv4_table_id=0): - """ Configure interface. + def configure_interface( + self, interface, ipv6=False, ipv4=False, ipv6_table_id=0, ipv4_table_id=0 + ): + """Configure interface. :param ipv6: configure IPv6 on interface :param ipv4: configure IPv4 on interface :param ipv6_table_id: FIB table_id for IPv6 @@ -71,9 +74,8 @@ class TestSRv6Ad(VppTestCase): interface.resolve_arp() interface.admin_up() - def setup_interfaces(self, ipv6=[], ipv4=[], - ipv6_table_id=[], ipv4_table_id=[]): - """ Create and configure interfaces. + def setup_interfaces(self, ipv6=[], ipv4=[], ipv6_table_id=[], ipv4_table_id=[]): + """Create and configure interfaces. :param ipv6: list of interface IPv6 capabilities :param ipv4: list of interface IPv4 capabilities @@ -108,9 +110,9 @@ class TestSRv6Ad(VppTestCase): # setup all interfaces for i in range(count): intf = self.pg_interfaces[i] - self.configure_interface(intf, - ipv6[i], ipv4[i], - ipv6_table_id[i], ipv4_table_id[i]) + self.configure_interface( + intf, ipv6[i], ipv4[i], ipv6_table_id[i], ipv4_table_id[i] + ) if any(ipv6): self.logger.debug(self.vapi.cli("show ip6 neighbors")) @@ -122,8 +124,7 @@ class TestSRv6Ad(VppTestCase): return self.pg_interfaces def teardown_interfaces(self): - """ Unconfigure and bring down interface. - """ + """Unconfigure and bring down interface.""" self.logger.debug("Tearing down interfaces") # tear down all interfaces # AFAIK they cannot be deleted @@ -135,10 +136,9 @@ class TestSRv6Ad(VppTestCase): i.set_table_ip6(0) def test_SRv6_End_AD_IPv6(self): - """ Test SRv6 End.AD behavior with IPv6 traffic. - """ - self.src_addr = 'a0::' - self.sid_list = ['a1::', 'a2::a6', 'a3::'] + """Test SRv6 End.AD behavior with IPv6 traffic.""" + self.src_addr = "a0::" + self.sid_list = ["a1::", "a2::a6", "a3::"] self.test_sid_index = 1 # send traffic to one destination interface @@ -146,19 +146,32 @@ class TestSRv6Ad(VppTestCase): self.setup_interfaces(ipv6=[True, True]) # configure route to next segment - route = VppIpRoute(self, self.sid_list[self.test_sid_index + 1], 128, - [VppRoutePath(self.pg0.remote_ip6, - self.pg0.sw_if_index, - proto=DpoProto.DPO_PROTO_IP6)]) + route = VppIpRoute( + self, + self.sid_list[self.test_sid_index + 1], + 128, + [ + VppRoutePath( + self.pg0.remote_ip6, + self.pg0.sw_if_index, + proto=DpoProto.DPO_PROTO_IP6, + ) + ], + ) route.add_vpp_config() # configure SRv6 localSID behavior - cli_str = "sr localsid address " + \ - self.sid_list[self.test_sid_index] + \ - " behavior end.ad" + \ - " nh " + self.pg1.remote_ip6 + \ - " oif " + self.pg1.name + \ - " iif " + self.pg1.name + cli_str = ( + "sr localsid address " + + self.sid_list[self.test_sid_index] + + " behavior end.ad" + + " nh " + + self.pg1.remote_ip6 + + " oif " + + self.pg1.name + + " iif " + + self.pg1.name + ) self.vapi.cli(cli_str) # log the localsids @@ -171,15 +184,18 @@ class TestSRv6Ad(VppTestCase): packet_header1 = self.create_packet_header_IPv6_SRH_IPv6( srcaddr=self.src_addr, sidlist=self.sid_list[::-1], - segleft=len(self.sid_list) - self.test_sid_index - 1) + segleft=len(self.sid_list) - self.test_sid_index - 1, + ) # generate packets (pg0->pg1) - pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, - self.pg_packet_sizes, count) + pkts1 = self.create_stream( + self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, - self.compare_rx_tx_packet_End_AD_IPv6_out) + self.send_and_verify_pkts( + self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AD_IPv6_out + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) @@ -188,26 +204,27 @@ class TestSRv6Ad(VppTestCase): packet_header2 = self.create_packet_header_IPv6() # generate returning packets (pg1->pg0) - pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, - self.pg_packet_sizes, count) + pkts2 = self.create_stream( + self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, - self.compare_rx_tx_packet_End_AD_IPv6_in) + self.send_and_verify_pkts( + self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AD_IPv6_in + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) # remove SRv6 localSIDs - cli_str = "sr localsid del address " + \ - self.sid_list[self.test_sid_index] + cli_str = "sr localsid del address " + self.sid_list[self.test_sid_index] self.vapi.cli(cli_str) # cleanup interfaces self.teardown_interfaces() def compare_rx_tx_packet_End_AD_IPv6_out(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD with IPv6 + """Compare input and output packet after passing End.AD with IPv6 :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -232,7 +249,7 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") def compare_rx_tx_packet_End_AD_IPv6_in(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD + """Compare input and output packet after passing End.AD :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -253,8 +270,7 @@ class TestSRv6Ad(VppTestCase): # rx'ed seglist should be equal to SID-list in reversed order self.assertEqual(rx_srh.addresses, self.sid_list[::-1]) # segleft should be equal to previous segleft value minus 1 - self.assertEqual(rx_srh.segleft, - len(self.sid_list) - self.test_sid_index - 2) + self.assertEqual(rx_srh.segleft, len(self.sid_list) - self.test_sid_index - 2) # lastentry should be equal to the SID-list length minus 1 self.assertEqual(rx_srh.lastentry, len(self.sid_list) - 1) @@ -269,10 +285,9 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") def test_SRv6_End_AD_IPv4(self): - """ Test SRv6 End.AD behavior with IPv4 traffic. - """ - self.src_addr = 'a0::' - self.sid_list = ['a1::', 'a2::a4', 'a3::'] + """Test SRv6 End.AD behavior with IPv4 traffic.""" + self.src_addr = "a0::" + self.sid_list = ["a1::", "a2::a4", "a3::"] self.test_sid_index = 1 # send traffic to one destination interface @@ -280,19 +295,32 @@ class TestSRv6Ad(VppTestCase): self.setup_interfaces(ipv6=[True, False], ipv4=[False, True]) # configure route to next segment - route = VppIpRoute(self, self.sid_list[self.test_sid_index + 1], 128, - [VppRoutePath(self.pg0.remote_ip6, - self.pg0.sw_if_index, - proto=DpoProto.DPO_PROTO_IP6)]) + route = VppIpRoute( + self, + self.sid_list[self.test_sid_index + 1], + 128, + [ + VppRoutePath( + self.pg0.remote_ip6, + self.pg0.sw_if_index, + proto=DpoProto.DPO_PROTO_IP6, + ) + ], + ) route.add_vpp_config() # configure SRv6 localSID behavior - cli_str = "sr localsid address " + \ - self.sid_list[self.test_sid_index] + \ - " behavior end.ad" + \ - " nh " + self.pg1.remote_ip4 + \ - " oif " + self.pg1.name + \ - " iif " + self.pg1.name + cli_str = ( + "sr localsid address " + + self.sid_list[self.test_sid_index] + + " behavior end.ad" + + " nh " + + self.pg1.remote_ip4 + + " oif " + + self.pg1.name + + " iif " + + self.pg1.name + ) self.vapi.cli(cli_str) # log the localsids @@ -305,15 +333,18 @@ class TestSRv6Ad(VppTestCase): packet_header1 = self.create_packet_header_IPv6_SRH_IPv4( srcaddr=self.src_addr, sidlist=self.sid_list[::-1], - segleft=len(self.sid_list) - self.test_sid_index - 1) + segleft=len(self.sid_list) - self.test_sid_index - 1, + ) # generate packets (pg0->pg1) - pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, - self.pg_packet_sizes, count) + pkts1 = self.create_stream( + self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, - self.compare_rx_tx_packet_End_AD_IPv4_out) + self.send_and_verify_pkts( + self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AD_IPv4_out + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) @@ -322,26 +353,27 @@ class TestSRv6Ad(VppTestCase): packet_header2 = self.create_packet_header_IPv4() # generate returning packets (pg1->pg0) - pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, - self.pg_packet_sizes, count) + pkts2 = self.create_stream( + self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, - self.compare_rx_tx_packet_End_AD_IPv4_in) + self.send_and_verify_pkts( + self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AD_IPv4_in + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) # remove SRv6 localSIDs - cli_str = "sr localsid del address " + \ - self.sid_list[self.test_sid_index] + cli_str = "sr localsid del address " + self.sid_list[self.test_sid_index] self.vapi.cli(cli_str) # cleanup interfaces self.teardown_interfaces() def compare_rx_tx_packet_End_AD_IPv4_out(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD with IPv4 + """Compare input and output packet after passing End.AD with IPv4 :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -371,7 +403,7 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") def compare_rx_tx_packet_End_AD_IPv4_in(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD + """Compare input and output packet after passing End.AD :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -392,8 +424,7 @@ class TestSRv6Ad(VppTestCase): # rx'ed seglist should be equal to SID-list in reversed order self.assertEqual(rx_srh.addresses, self.sid_list[::-1]) # segleft should be equal to previous segleft value minus 1 - self.assertEqual(rx_srh.segleft, - len(self.sid_list) - self.test_sid_index - 2) + self.assertEqual(rx_srh.segleft, len(self.sid_list) - self.test_sid_index - 2) # lastentry should be equal to the SID-list length minus 1 self.assertEqual(rx_srh.lastentry, len(self.sid_list) - 1) @@ -411,10 +442,9 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") def test_SRv6_End_AD_L2(self): - """ Test SRv6 End.AD behavior with L2 traffic. - """ - self.src_addr = 'a0::' - self.sid_list = ['a1::', 'a2::a4', 'a3::'] + """Test SRv6 End.AD behavior with L2 traffic.""" + self.src_addr = "a0::" + self.sid_list = ["a1::", "a2::a4", "a3::"] self.test_sid_index = 1 # send traffic to one destination interface @@ -422,18 +452,30 @@ class TestSRv6Ad(VppTestCase): self.setup_interfaces(ipv6=[True, False]) # configure route to next segment - route = VppIpRoute(self, self.sid_list[self.test_sid_index + 1], 128, - [VppRoutePath(self.pg0.remote_ip6, - self.pg0.sw_if_index, - proto=DpoProto.DPO_PROTO_IP6)]) + route = VppIpRoute( + self, + self.sid_list[self.test_sid_index + 1], + 128, + [ + VppRoutePath( + self.pg0.remote_ip6, + self.pg0.sw_if_index, + proto=DpoProto.DPO_PROTO_IP6, + ) + ], + ) route.add_vpp_config() # configure SRv6 localSID behavior - cli_str = "sr localsid address " + \ - self.sid_list[self.test_sid_index] + \ - " behavior end.ad" + \ - " oif " + self.pg1.name + \ - " iif " + self.pg1.name + cli_str = ( + "sr localsid address " + + self.sid_list[self.test_sid_index] + + " behavior end.ad" + + " oif " + + self.pg1.name + + " iif " + + self.pg1.name + ) self.vapi.cli(cli_str) # log the localsids @@ -447,15 +489,18 @@ class TestSRv6Ad(VppTestCase): srcaddr=self.src_addr, sidlist=self.sid_list[::-1], segleft=len(self.sid_list) - self.test_sid_index - 1, - vlan=0) + vlan=0, + ) # generate packets (pg0->pg1) - pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1, - self.pg_packet_sizes, count) + pkts1 = self.create_stream( + self.pg0, self.pg1, packet_header1, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg0, pkts1, self.pg1, - self.compare_rx_tx_packet_End_AD_L2_out) + self.send_and_verify_pkts( + self.pg0, pkts1, self.pg1, self.compare_rx_tx_packet_End_AD_L2_out + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) @@ -464,26 +509,27 @@ class TestSRv6Ad(VppTestCase): packet_header2 = self.create_packet_header_L2() # generate returning packets (pg1->pg0) - pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2, - self.pg_packet_sizes, count) + pkts2 = self.create_stream( + self.pg1, self.pg0, packet_header2, self.pg_packet_sizes, count + ) # send packets and verify received packets - self.send_and_verify_pkts(self.pg1, pkts2, self.pg0, - self.compare_rx_tx_packet_End_AD_L2_in) + self.send_and_verify_pkts( + self.pg1, pkts2, self.pg0, self.compare_rx_tx_packet_End_AD_L2_in + ) # log the localsid counters self.logger.info(self.vapi.cli("show sr localsid")) # remove SRv6 localSIDs - cli_str = "sr localsid del address " + \ - self.sid_list[self.test_sid_index] + cli_str = "sr localsid del address " + self.sid_list[self.test_sid_index] self.vapi.cli(cli_str) # cleanup interfaces self.teardown_interfaces() def compare_rx_tx_packet_End_AD_L2_out(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD with L2 + """Compare input and output packet after passing End.AD with L2 :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -506,7 +552,7 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") def compare_rx_tx_packet_End_AD_L2_in(self, tx_pkt, rx_pkt): - """ Compare input and output packet after passing End.AD + """Compare input and output packet after passing End.AD :param tx_pkt: transmitted packet :param rx_pkt: received packet @@ -528,8 +574,7 @@ class TestSRv6Ad(VppTestCase): # rx'ed seglist should be equal to SID-list in reversed order self.assertEqual(rx_srh.addresses, self.sid_list[::-1]) # segleft should be equal to previous segleft value minus 1 - self.assertEqual(rx_srh.segleft, - len(self.sid_list) - self.test_sid_index - 2) + self.assertEqual(rx_srh.segleft, len(self.sid_list) - self.test_sid_index - 2) # lastentry should be equal to the SID-list length minus 1 self.assertEqual(rx_srh.lastentry, len(self.sid_list) - 1) @@ -539,8 +584,7 @@ class TestSRv6Ad(VppTestCase): self.logger.debug("packet verification: SUCCESS") - def create_stream(self, src_if, dst_if, packet_header, packet_sizes, - count): + def create_stream(self, src_if, dst_if, packet_header, packet_sizes, count): """Create SRv6 input packet stream for defined interface. :param VppInterface src_if: Interface to create packet stream for @@ -557,15 +601,17 @@ class TestSRv6Ad(VppTestCase): pkts = [] for i in range(0, count - 1): payload_info = self.create_packet_info(src_if, dst_if) - self.logger.debug( - "Creating packet with index %d" % (payload_info.index)) + self.logger.debug("Creating packet with index %d" % (payload_info.index)) payload = self.info_to_payload(payload_info) # add L2 header if not yet provided in packet_header - if packet_header.getlayer(0).name == 'Ethernet': + if packet_header.getlayer(0).name == "Ethernet": p = packet_header / Raw(payload) else: - p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) / \ - packet_header / Raw(payload) + p = ( + Ether(dst=src_if.local_mac, src=src_if.remote_mac) + / packet_header + / Raw(payload) + ) size = packet_sizes[i % len(packet_sizes)] self.logger.debug("Packet size %d" % (size)) self.extend_packet(p, size) @@ -618,7 +664,7 @@ class TestSRv6Ad(VppTestCase): UDP source port and destination port are 1234 """ - p = IPv6(src='1234::1', dst='4321::1') / UDP(sport=1234, dport=1234) + p = IPv6(src="1234::1", dst="4321::1") / UDP(sport=1234, dport=1234) return p def create_packet_header_IPv6_SRH_IPv6(self, srcaddr, sidlist, segleft): @@ -636,11 +682,12 @@ class TestSRv6Ad(VppTestCase): UDP source port and destination port are 1234 """ - p = IPv6(src=srcaddr, dst=sidlist[segleft]) / \ - IPv6ExtHdrSegmentRouting(addresses=sidlist, - segleft=segleft, nh=41) / \ - IPv6(src='1234::1', dst='4321::1') / \ - UDP(sport=1234, dport=1234) + p = ( + IPv6(src=srcaddr, dst=sidlist[segleft]) + / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=41) + / IPv6(src="1234::1", dst="4321::1") + / UDP(sport=1234, dport=1234) + ) return p def create_packet_header_IPv4(self): @@ -653,7 +700,7 @@ class TestSRv6Ad(VppTestCase): UDP source port and destination port are 1234 """ - p = IP(src='123.1.1.1', dst='124.1.1.1') / UDP(sport=1234, dport=1234) + p = IP(src="123.1.1.1", dst="124.1.1.1") / UDP(sport=1234, dport=1234) return p def create_packet_header_IPv6_SRH_IPv4(self, srcaddr, sidlist, segleft): @@ -671,11 +718,12 @@ class TestSRv6Ad(VppTestCase): UDP source port and destination port are 1234 """ - p = IPv6(src=srcaddr, dst=sidlist[segleft]) / \ - IPv6ExtHdrSegmentRouting(addresses=sidlist, - segleft=segleft, nh=4) / \ - IP(src='123.1.1.1', dst='124.1.1.1') / \ - UDP(sport=1234, dport=1234) + p = ( + IPv6(src=srcaddr, dst=sidlist[segleft]) + / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=4) + / IP(src="123.1.1.1", dst="124.1.1.1") + / UDP(sport=1234, dport=1234) + ) return p def create_packet_header_L2(self, vlan=0): @@ -686,7 +734,7 @@ class TestSRv6Ad(VppTestCase): # Note: the dst addr ('00:55:44:33:22:11') is used in # the compare function compare_rx_tx_packet_T_Encaps_L2 # to detect presence of L2 in SRH payload - p = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11') + p = Ether(src="00:11:22:33:44:55", dst="00:55:44:33:22:11") etype = 0x8137 # IPX if vlan: # add 802.1q layer @@ -695,8 +743,7 @@ class TestSRv6Ad(VppTestCase): p.type = etype return p - def create_packet_header_IPv6_SRH_L2(self, srcaddr, sidlist, segleft, - vlan=0): + def create_packet_header_IPv6_SRH_L2(self, srcaddr, sidlist, segleft, vlan=0): """Create packet header: L2 encapsulated in SRv6: IPv6 header with SRH, L2 @@ -708,7 +755,7 @@ class TestSRv6Ad(VppTestCase): IPv6 source address is set to srcaddr IPv6 destination address is set to sidlist[segleft] """ - eth = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11') + eth = Ether(src="00:11:22:33:44:55", dst="00:55:44:33:22:11") etype = 0x8137 # IPX if vlan: # add 802.1q layer @@ -716,15 +763,15 @@ class TestSRv6Ad(VppTestCase): else: eth.type = etype - p = IPv6(src=srcaddr, dst=sidlist[segleft]) / \ - IPv6ExtHdrSegmentRouting(addresses=sidlist, - segleft=segleft, nh=143) / \ - eth + p = ( + IPv6(src=srcaddr, dst=sidlist[segleft]) + / IPv6ExtHdrSegmentRouting(addresses=sidlist, segleft=segleft, nh=143) + / eth + ) return p def get_payload_info(self, packet): - """ Extract the payload_info from the packet - """ + """Extract the payload_info from the packet""" # in most cases, payload_info is in packet[Raw] # but packet[Raw] gives the complete payload # (incl L2 header) for the T.Encaps L2 case @@ -736,7 +783,8 @@ class TestSRv6Ad(VppTestCase): # take packet[Raw], convert it to an Ether layer # and then extract Raw from it payload_info = self.payload_to_info( - Ether(scapy.compat.raw(packet[Raw]))[Raw]) + Ether(scapy.compat.raw(packet[Raw]))[Raw] + ) return payload_info @@ -749,8 +797,10 @@ class TestSRv6Ad(VppTestCase): :param capture: captured packets :param compare_func: function to compare in and out packet """ - self.logger.info("Verifying capture on interface %s using function %s" - % (dst_if.name, compare_func.__name__)) + self.logger.info( + "Verifying capture on interface %s using function %s" + % (dst_if.name, compare_func.__name__) + ) last_info = dict() for i in self.pg_interfaces: @@ -763,19 +813,19 @@ class TestSRv6Ad(VppTestCase): payload_info = self.get_payload_info(packet) packet_index = payload_info.index - self.logger.debug("Verifying packet with index %d" - % (packet_index)) + self.logger.debug("Verifying packet with index %d" % (packet_index)) # packet should have arrived on the expected interface self.assertEqual(payload_info.dst, dst_sw_if_index) self.logger.debug( - "Got packet on interface %s: src=%u (idx=%u)" % - (dst_if.name, payload_info.src, packet_index)) + "Got packet on interface %s: src=%u (idx=%u)" + % (dst_if.name, payload_info.src, packet_index) + ) # search for payload_info with same src and dst if_index # this will give us the transmitted packet next_info = self.get_next_packet_info_for_interface2( - payload_info.src, dst_sw_if_index, - last_info[payload_info.src]) + payload_info.src, dst_sw_if_index, last_info[payload_info.src] + ) last_info[payload_info.src] = next_info # next_info should not be None self.assertTrue(next_info is not None) @@ -784,8 +834,9 @@ class TestSRv6Ad(VppTestCase): # data field of next_info contains the tx packet txed_packet = next_info.data - self.logger.debug(ppp("Transmitted packet:", - txed_packet)) # ppp=Pretty Print Packet + self.logger.debug( + ppp("Transmitted packet:", txed_packet) + ) # ppp=Pretty Print Packet self.logger.debug(ppp("Received packet:", packet)) @@ -799,11 +850,14 @@ class TestSRv6Ad(VppTestCase): # have all expected packets arrived? for i in self.pg_interfaces: remaining_packet = self.get_next_packet_info_for_interface2( - i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index]) - self.assertTrue(remaining_packet is None, - "Interface %s: Packet expected from interface %s " - "didn't arrive" % (dst_if.name, i.name)) + i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index] + ) + self.assertTrue( + remaining_packet is None, + "Interface %s: Packet expected from interface %s " + "didn't arrive" % (dst_if.name, i.name), + ) -if __name__ == '__main__': +if __name__ == "__main__": unittest.main(testRunner=VppTestRunner) |