summaryrefslogtreecommitdiffstats
path: root/test/test_srv6_as.py
diff options
context:
space:
mode:
Diffstat (limited to 'test/test_srv6_as.py')
-rwxr-xr-x[-rw-r--r--]test/test_srv6_as.py199
1 files changed, 199 insertions, 0 deletions
diff --git a/test/test_srv6_as.py b/test/test_srv6_as.py
index 0e94bd97ce6..0fa838edd10 100644..100755
--- a/test/test_srv6_as.py
+++ b/test/test_srv6_as.py
@@ -162,6 +162,93 @@ class TestSRv6(VppTestCase):
test_sid_index=0,
rewrite_src_addr='a1::')
+ def test_SRv6_End_AS_L2_noSRH(self):
+ """ Test SRv6 End.AS behavior with L2 traffic and no SRH rewrite.
+ """
+ self.run_SRv6_End_AS_L2(
+ sid_list=['a1::', 'a2::a6', 'a3::'],
+ test_sid_index=1,
+ rewrite_src_addr='a2::')
+
+ def test_SRv6_End_AS_L2_SRH(self):
+ """ Test SRv6 End.AS behavior with L2 traffic and SRH rewrite.
+ """
+ self.run_SRv6_End_AS_L2(
+ sid_list=['a1::a6', 'a2::', 'a3::'],
+ test_sid_index=0,
+ rewrite_src_addr='a1::')
+
+ def run_SRv6_End_AS_L2(self, sid_list, test_sid_index, rewrite_src_addr):
+ """ Run SRv6 End.AS test with L2 traffic.
+ """
+ self.rewrite_src_addr = rewrite_src_addr
+ self.rewrite_sid_list = sid_list[test_sid_index + 1::]
+
+ # send traffic to one destination interface
+ # source and destination interfaces are IPv6 only
+ self.setup_interfaces(ipv6=[True, False])
+
+ # configure route to next segment
+ route = VppIpRoute(self, sid_list[test_sid_index + 1], 128,
+ [VppRoutePath(self.pg0.remote_ip6,
+ self.pg0.sw_if_index,
+ proto=DpoProto.DPO_PROTO_IP6)],
+ is_ip6=1)
+ route.add_vpp_config()
+
+ # configure SRv6 localSID behavior
+ cli_str = "sr localsid address " + sid_list[test_sid_index] \
+ + " behavior end.as" \
+ + " oif " + self.pg1.name \
+ + " iif " + self.pg1.name \
+ + " src " + self.rewrite_src_addr
+ for s in self.rewrite_sid_list:
+ cli_str += " next " + s
+ self.vapi.cli(cli_str)
+
+ # log the localsids
+ self.logger.debug(self.vapi.cli("show sr localsid"))
+
+ # send one packet per packet size
+ count = len(self.pg_packet_sizes)
+
+ # prepare L2 in SRv6 headers
+ packet_header1 = self.create_packet_header_IPv6_SRH_L2(
+ sidlist=sid_list[::-1],
+ segleft=len(sid_list) - test_sid_index - 1,
+ vlan=0)
+
+ # generate packets (pg0->pg1)
+ pkts1 = self.create_stream(self.pg0, self.pg1, packet_header1,
+ self.pg_packet_sizes, count)
+
+ # send packets and verify received packets
+ self.send_and_verify_pkts(self.pg0, pkts1, self.pg1,
+ self.compare_rx_tx_packet_End_AS_L2_out)
+
+ # log the localsid counters
+ self.logger.info(self.vapi.cli("show sr localsid"))
+
+ # prepare L2 header for returning packets
+ packet_header2 = self.create_packet_header_L2()
+
+ # generate returning packets (pg1->pg0)
+ pkts2 = self.create_stream(self.pg1, self.pg0, packet_header2,
+ self.pg_packet_sizes, count)
+
+ # send packets and verify received packets
+ self.send_and_verify_pkts(self.pg1, pkts2, self.pg0,
+ self.compare_rx_tx_packet_End_AS_L2_in)
+
+ # log the localsid counters
+ self.logger.info(self.vapi.cli("show sr localsid"))
+
+ # remove SRv6 localSIDs
+ self.vapi.cli("sr localsid del address " + sid_list[test_sid_index])
+
+ # cleanup interfaces
+ self.teardown_interfaces()
+
def run_SRv6_End_AS_IPv6(self, sid_list, test_sid_index, rewrite_src_addr):
""" Run SRv6 End.AS test with IPv6 traffic.
"""
@@ -407,6 +494,53 @@ class TestSRv6(VppTestCase):
self.logger.debug("packet verification: SUCCESS")
+ def compare_rx_tx_packet_End_AS_L2_in(self, tx_pkt, rx_pkt):
+ """ Compare input and output packet after passing End.AS
+
+ :param tx_pkt: transmitted packet
+ :param rx_pkt: received packet
+ """
+
+ # get first (outer) IPv6 header of rx'ed packet
+ rx_ip = rx_pkt.getlayer(IPv6)
+ rx_srh = None
+
+ tx_ether = tx_pkt.getlayer(Ether)
+
+ # expected segment-list (SRH order)
+ tx_seglist = self.rewrite_sid_list[::-1]
+
+ # received ip.src should be equal to SR Policy source
+ self.assertEqual(rx_ip.src, self.rewrite_src_addr)
+ # received ip.dst should be equal to expected sidlist[lastentry]
+ self.assertEqual(rx_ip.dst, tx_seglist[-1])
+
+ if len(tx_seglist) > 1:
+ # rx'ed packet should have SRH
+ self.assertTrue(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+ # get SRH
+ rx_srh = rx_pkt.getlayer(IPv6ExtHdrSegmentRouting)
+ # rx'ed seglist should be equal to seglist
+ self.assertEqual(rx_srh.addresses, tx_seglist)
+ # segleft should be equal to size seglist-1
+ self.assertEqual(rx_srh.segleft, len(tx_seglist)-1)
+ # segleft should be equal to lastentry
+ self.assertEqual(rx_srh.segleft, rx_srh.lastentry)
+ # nh should be "No Next Header" (59)
+ self.assertEqual(rx_srh.nh, 59)
+ # get payload
+ payload = rx_srh.payload
+ else:
+ # rx'ed packet should NOT have SRH
+ self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+ # get payload
+ payload = rx_ip.payload
+
+ # the whole rx'ed pkt beyond SRH should be equal to tx'ed pkt
+ self.assertEqual(Ether(str(payload)), tx_ether)
+
+ self.logger.debug("packet verification: SUCCESS")
+
def compare_rx_tx_packet_End_AS_IPv6_out(self, tx_pkt, rx_pkt):
""" Compare input and output packet after passing End.AS with IPv6
@@ -462,6 +596,29 @@ class TestSRv6(VppTestCase):
self.logger.debug("packet verification: SUCCESS")
+ def compare_rx_tx_packet_End_AS_L2_out(self, tx_pkt, rx_pkt):
+ """ Compare input and output packet after passing End.AS with L2
+
+ :param tx_pkt: transmitted packet
+ :param rx_pkt: received packet
+ """
+
+ # get IPv4 header of rx'ed packet
+ rx_eth = rx_pkt.getlayer(Ether)
+
+ tx_ip = tx_pkt.getlayer(IPv6)
+ # we can't just get the 2nd Ether layer
+ # get the Raw content and dissect it as Ether
+ tx_eth1 = Ether(str(tx_pkt[Raw]))
+
+ # verify if rx'ed packet has no SRH
+ self.assertFalse(rx_pkt.haslayer(IPv6ExtHdrSegmentRouting))
+
+ # the whole rx_eth pkt should be equal to tx_eth1
+ self.assertEqual(rx_eth, tx_eth1)
+
+ self.logger.debug("packet verification: SUCCESS")
+
def create_stream(self, src_if, dst_if, packet_header, packet_sizes,
count):
"""Create SRv6 input packet stream for defined interface.
@@ -604,6 +761,48 @@ class TestSRv6(VppTestCase):
UDP(sport=1234, dport=1234))
return p
+ def create_packet_header_L2(self, vlan=0):
+ """Create packet header: L2 header
+
+ :param vlan: if vlan!=0 then add 802.1q header
+ """
+ # Note: the dst addr ('00:55:44:33:22:11') is used in
+ # the compare function compare_rx_tx_packet_T_Encaps_L2
+ # to detect presence of L2 in SRH payload
+ p = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+ etype = 0x8137 # IPX
+ if vlan:
+ # add 802.1q layer
+ p /= Dot1Q(vlan=vlan, type=etype)
+ else:
+ p.type = etype
+ return p
+
+ def create_packet_header_IPv6_SRH_L2(self, sidlist, segleft, vlan=0):
+ """Create packet header: L2 encapsulated in SRv6:
+ IPv6 header with SRH, L2
+
+ :param list sidlist: segment list of outer IPv6 SRH
+ :param int segleft: segments-left field of outer IPv6 SRH
+ :param vlan: L2 vlan; if vlan!=0 then add 802.1q header
+
+ Outer IPv6 destination address is set to sidlist[segleft]
+ IPv6 source address is 1234::1
+ """
+ eth = Ether(src='00:11:22:33:44:55', dst='00:55:44:33:22:11')
+ etype = 0x8137 # IPX
+ if vlan:
+ # add 802.1q layer
+ eth /= Dot1Q(vlan=vlan, type=etype)
+ else:
+ eth.type = etype
+
+ p = (IPv6(src='1234::1', dst=sidlist[segleft]) /
+ IPv6ExtHdrSegmentRouting(addresses=sidlist,
+ segleft=segleft, nh=59) /
+ eth)
+ return p
+
def get_payload_info(self, packet):
""" Extract the payload_info from the packet
"""