summaryrefslogtreecommitdiffstats
path: root/test/test_vxlan_gbp.py
diff options
context:
space:
mode:
Diffstat (limited to 'test/test_vxlan_gbp.py')
-rw-r--r--test/test_vxlan_gbp.py293
1 files changed, 293 insertions, 0 deletions
diff --git a/test/test_vxlan_gbp.py b/test/test_vxlan_gbp.py
new file mode 100644
index 00000000000..f332aced7d8
--- /dev/null
+++ b/test/test_vxlan_gbp.py
@@ -0,0 +1,293 @@
+#!/usr/bin/env python3
+
+import socket
+from util import ip4_range, reassemble4_ether
+import unittest
+from framework import VppTestCase, VppTestRunner
+from template_bd import BridgeDomain
+
+from scapy.layers.l2 import Ether
+from scapy.packet import Raw
+from scapy.layers.inet import IP, UDP
+from scapy.layers.vxlan import VXLAN
+
+from vpp_ip_route import VppIpRoute, VppRoutePath
+from vpp_ip import INVALID_INDEX
+
+
+class TestVxlanGbp(VppTestCase):
+ """ VXLAN GBP Test Case """
+
+ @property
+ def frame_request(self):
+ """ Ethernet frame modeling a generic request """
+ return (Ether(src='00:00:00:00:00:01', dst='00:00:00:00:00:02') /
+ IP(src='1.2.3.4', dst='4.3.2.1') /
+ UDP(sport=10000, dport=20000) /
+ Raw(b'\xa5' * 100))
+
+ @property
+ def frame_reply(self):
+ """ Ethernet frame modeling a generic reply """
+ return (Ether(src='00:00:00:00:00:02', dst='00:00:00:00:00:01') /
+ IP(src='4.3.2.1', dst='1.2.3.4') /
+ UDP(sport=20000, dport=10000) /
+ Raw(b'\xa5' * 100))
+
+ def encapsulate(self, pkt, vni):
+ """
+ Encapsulate the original payload frame by adding VXLAN GBP header with
+ its UDP, IP and Ethernet fields
+ """
+ return (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) /
+ IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) /
+ UDP(sport=self.dport, dport=self.dport, chksum=0) /
+ VXLAN(vni=vni, flags=self.flags, gpflags=self.gpflags,
+ gpid=self.sclass) / pkt)
+
+ def ip_range(self, start, end):
+ """ range of remote ip's """
+ return ip4_range(self.pg0.remote_ip4, start, end)
+
+ def decapsulate(self, pkt):
+ """
+ Decapsulate the original payload frame by removing VXLAN header
+ """
+ # check if is set G and I flag
+ self.assertEqual(pkt[VXLAN].flags, int('0x88', 16))
+ return pkt[VXLAN].payload
+
+ # Method for checking VXLAN GBP encapsulation.
+ #
+ def check_encapsulation(self, pkt, vni, local_only=False, mcast_pkt=False):
+ # TODO: add error messages
+ # Verify source MAC is VPP_MAC and destination MAC is MY_MAC resolved
+ # by VPP using ARP.
+ self.assertEqual(pkt[Ether].src, self.pg0.local_mac)
+ if not local_only:
+ if not mcast_pkt:
+ self.assertEqual(pkt[Ether].dst, self.pg0.remote_mac)
+ else:
+ self.assertEqual(pkt[Ether].dst, type(self).mcast_mac)
+ # Verify VXLAN GBP tunnel source IP is VPP_IP and destination IP is
+ # MY_IP.
+ self.assertEqual(pkt[IP].src, self.pg0.local_ip4)
+ if not local_only:
+ if not mcast_pkt:
+ self.assertEqual(pkt[IP].dst, self.pg0.remote_ip4)
+ else:
+ self.assertEqual(pkt[IP].dst, type(self).mcast_ip4)
+ # Verify UDP destination port is VXLAN GBP 48879, source UDP port could
+ # be arbitrary.
+ self.assertEqual(pkt[UDP].dport, type(self).dport)
+ # Verify UDP checksum
+ self.assert_udp_checksum_valid(pkt)
+ # Verify VNI
+ # pkt.show()
+ self.assertEqual(pkt[VXLAN].vni, vni)
+ # Verify Source Class
+ self.assertEqual(pkt[VXLAN].gpid, 0)
+
+ @classmethod
+ def create_vxlan_gbp_flood_test_bd(cls, vni, n_ucast_tunnels):
+ # Create 2 ucast vxlan tunnels under bd
+ ip_range_start = 10
+ ip_range_end = ip_range_start + n_ucast_tunnels
+ next_hop_address = cls.pg0.remote_ip4
+ for dest_ip4 in ip4_range(cls.pg0.remote_ip4,
+ ip_range_start,
+ ip_range_end):
+ # add host route so dest_ip4 will not be resolved
+ rip = VppIpRoute(cls, dest_ip4, 32,
+ [VppRoutePath(next_hop_address,
+ INVALID_INDEX)],
+ register=False)
+ rip.add_vpp_config()
+ r = cls.vapi.vxlan_gbp_tunnel_add_del(
+ tunnel={
+ 'src': cls.pg0.local_ip4,
+ 'dst': dest_ip4,
+ 'vni': vni,
+ 'instance': INVALID_INDEX,
+ 'mcast_sw_if_index': INVALID_INDEX,
+ 'mode': 1,
+ },
+ is_add=1
+ )
+ cls.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index,
+ bd_id=vni)
+
+ # Class method to start the VXLAN GBP test case.
+ # Overrides setUpClass method in VppTestCase class.
+ # Python try..except statement is used to ensure that the tear down of
+ # the class will be executed even if exception is raised.
+ # @param cls The class pointer.
+ @classmethod
+ def setUpClass(cls):
+ super(TestVxlanGbp, cls).setUpClass()
+
+ try:
+ cls.dport = 48879
+ cls.flags = 0x88
+ cls.gpflags = 0x0
+ cls.sclass = 0
+
+ # Create 2 pg interfaces.
+ cls.create_pg_interfaces(range(4))
+ for pg in cls.pg_interfaces:
+ pg.admin_up()
+
+ # Configure IPv4 addresses on VPP pg0.
+ cls.pg0.config_ip4()
+
+ # Resolve MAC address for VPP's IP address on pg0.
+ cls.pg0.resolve_arp()
+
+ # Create VXLAN GBP VTEP on VPP pg0, and put vxlan_gbp_tunnel0 and
+ # pg1 into BD.
+ cls.single_tunnel_bd = 1
+ cls.single_tunnel_vni = 0xabcde
+ r = cls.vapi.vxlan_gbp_tunnel_add_del(
+ tunnel={
+ 'src': cls.pg0.local_ip4,
+ 'dst': cls.pg0.remote_ip4,
+ 'vni': cls.single_tunnel_vni,
+ 'instance': INVALID_INDEX,
+ 'mcast_sw_if_index': INVALID_INDEX,
+ 'mode': 1,
+ },
+ is_add=1
+ )
+ cls.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index,
+ bd_id=cls.single_tunnel_bd)
+ cls.vapi.sw_interface_set_l2_bridge(
+ rx_sw_if_index=cls.pg1.sw_if_index,
+ bd_id=cls.single_tunnel_bd)
+
+ # Setup vni 2 to test multicast flooding
+ cls.n_ucast_tunnels = 2
+ # Setup vni 3 to test unicast flooding
+ cls.ucast_flood_bd = 3
+ cls.create_vxlan_gbp_flood_test_bd(cls.ucast_flood_bd,
+ cls.n_ucast_tunnels)
+ cls.vapi.sw_interface_set_l2_bridge(
+ rx_sw_if_index=cls.pg3.sw_if_index,
+ bd_id=cls.ucast_flood_bd)
+ except Exception:
+ super(TestVxlanGbp, cls).tearDownClass()
+ raise
+
+ @classmethod
+ def tearDownClass(cls):
+ super(TestVxlanGbp, cls).tearDownClass()
+
+ def assert_eq_pkts(self, pkt1, pkt2):
+ """ Verify the Ether, IP, UDP, payload are equal in both
+ packets
+ """
+ self.assertEqual(pkt1[Ether].src, pkt2[Ether].src)
+ self.assertEqual(pkt1[Ether].dst, pkt2[Ether].dst)
+ self.assertEqual(pkt1[IP].src, pkt2[IP].src)
+ self.assertEqual(pkt1[IP].dst, pkt2[IP].dst)
+ self.assertEqual(pkt1[UDP].sport, pkt2[UDP].sport)
+ self.assertEqual(pkt1[UDP].dport, pkt2[UDP].dport)
+ self.assertEqual(pkt1[Raw], pkt2[Raw])
+
+ def test_decap(self):
+ """ Decapsulation test
+ Send encapsulated frames from pg0
+ Verify receipt of decapsulated frames on pg1
+ """
+ encapsulated_pkt = self.encapsulate(self.frame_request,
+ self.single_tunnel_vni)
+
+ self.pg0.add_stream([encapsulated_pkt, ])
+
+ self.pg1.enable_capture()
+
+ self.pg_start()
+
+ # Pick first received frame and check if it's the non-encapsulated
+ # frame
+ out = self.pg1.get_capture(1)
+ pkt = out[0]
+ self.assert_eq_pkts(pkt, self.frame_request)
+
+ def test_encap(self):
+ """ Encapsulation test
+ Send frames from pg1
+ Verify receipt of encapsulated frames on pg0
+ """
+ self.pg1.add_stream([self.frame_reply])
+
+ self.pg0.enable_capture()
+
+ self.pg_start()
+
+ # Pick first received frame and check if it's correctly encapsulated.
+ out = self.pg0.get_capture(1)
+ pkt = out[0]
+ self.check_encapsulation(pkt, self.single_tunnel_vni)
+
+ payload = self.decapsulate(pkt)
+ self.assert_eq_pkts(payload, self.frame_reply)
+
+ def test_ucast_flood(self):
+ """ Unicast flood test
+ Send frames from pg3
+ Verify receipt of encapsulated frames on pg0
+ """
+ self.pg3.add_stream([self.frame_reply])
+
+ self.pg0.enable_capture()
+
+ self.pg_start()
+
+ # Get packet from each tunnel and assert it's correctly encapsulated.
+ out = self.pg0.get_capture(self.n_ucast_tunnels)
+ for pkt in out:
+ self.check_encapsulation(pkt, self.ucast_flood_bd, True)
+ payload = self.decapsulate(pkt)
+ self.assert_eq_pkts(payload, self.frame_reply)
+
+ def test_encap_big_packet(self):
+ """ Encapsulation test send big frame from pg1
+ Verify receipt of encapsulated frames on pg0
+ """
+
+ self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [1500, 0, 0, 0])
+
+ frame = (Ether(src='00:00:00:00:00:02', dst='00:00:00:00:00:01') /
+ IP(src='4.3.2.1', dst='1.2.3.4') /
+ UDP(sport=20000, dport=10000) /
+ Raw(b'\xa5' * 1450))
+
+ self.pg1.add_stream([frame])
+
+ self.pg0.enable_capture()
+
+ self.pg_start()
+
+ # Pick first received frame and check if it's correctly encapsulated.
+ out = self.pg0.get_capture(2)
+ pkt = reassemble4_ether(out)
+ self.check_encapsulation(pkt, self.single_tunnel_vni)
+
+ payload = self.decapsulate(pkt)
+ self.assert_eq_pkts(payload, frame)
+
+# Method to define VPP actions before tear down of the test case.
+# Overrides tearDown method in VppTestCase class.
+# @param self The object pointer.
+ def tearDown(self):
+ super(TestVxlanGbp, self).tearDown()
+
+ def show_commands_at_teardown(self):
+ self.logger.info(self.vapi.cli("show bridge-domain 1 detail"))
+ self.logger.info(self.vapi.cli("show bridge-domain 3 detail"))
+ self.logger.info(self.vapi.cli("show vxlan-gbp tunnel"))
+ self.logger.info(self.vapi.cli("show error"))
+
+
+if __name__ == '__main__':
+ unittest.main(testRunner=VppTestRunner)